Patton electronic 2157R manual

USER MANUAL MODEL 2157R Ruggedized CopperLink Ethernet Extender SALES OFFICE (301) 975-1000 TECHNICAL SUPPOR T (301) 975-1007 P ar t# 07M2157R-UM Rev . B Revised 10/15/08 An ISO-9001Cer tified Company This is a Class A device and is intended for use in a light industrial environment. It is not intended nor approved for use in an industrial or resi[...]

2 CONTENTS 1.0 Warranty Information ................................................................. 3 1.1 Compliance ................................................................................... 3 EMC Compliance:......................................................................... 3 Safety Compliance: ...................................[...]

3 C.2 CopperLink Interface .................................................................. 19 RJ-11 .......................................................................................... 19[...]

4 1.0 WARRANTY INFORMATION P atton Electronics warrants all Model 2157R components to be free from def ects, and will—at our option—repair or replace the product should it f ail within one year from the first date of the shipment. This warranty is limited to def ects in workmanship or mater ials, and does not cov er customer damage, ab use or [...]

5 limits f or a Class A computing de vice in accordance with the specifica- tions in Subpar t B of P ar t 15 of FCC rules, which are designed to provide reasonable protection from such interf erence in a commercial installa- tion. Howe v er , there is no guarantee that interference will not occur in a par ticular installation. If the equipment cau[...]

6 1.6 SAFETY WHEN WORKING WITH ELECTRICITY • This device contains no user serviceable parts. The equipment shall be returned to Patton Electronics for repairs, or repaired by qualified service personnel. • The external power adapter shall be a listed Limited Power Source. The mains outlet that is utilized to power the devise shall be within 10[...]

7 2.0 GENERAL INFORMATION Thank you purchasing this P atton Electronics product. This product has been thoroughly inspected and tested and is warranted f or one year for par ts and labor . If questions arise while installing or using this product, contact T echnical Support at +1 (301) 975-1007 . 2.1 FEATURES • Easy-to-install Ethernet Extenders?[...]

8 Figure 1. T ypical application The 2157/L and 2157/R work together to create a transparent e xtension between two peered Ethernet LANs. Figure 1 shows a typical point-to- point application.[...]

9 3.0 INSTALLATION Because the CopperLink Ethernet Extenders require no configuration, they can be installed quickly . Installation consists of the following: • Connect the line interf ace between the units (ref er to section 3.1, “Connecting the T wisted-P air Line Interface” on page 10) Note See Figure 2 for the rear-panel connectors locat[...]

10 3.1 CONNECTING THE TWISTED-PAIR LINE INTERFACE The Model 2157R suppor ts communication between two peer Ethernet LAN sites ov er a distance greater than 30,000 ft (9,144 m) o v er 24 A WG (0.5 mm) twisted-pair wire. Note The Model 2157R uses an auto-rate adaption f eature to provide the fastest data r ate possible o v er the wire and distance of[...]

11 3.2 LINE INTERFACE—CONNECTING THE 10/100BASE-T ETHERNET INTERFACE The shielded RJ-45 por t labeled Ethernet is the 10/100Base-T interf ace. This por t is designed to connect directly to a 10/100Base-T network. Figure 4 shows the signal/pin relationships on this interf ace . Y ou ma y connect this por t to another Ether net device via a T ype 4[...]

12 In its released position, the MDI-X s witch enables str aight-through con- nections (see Figure 6) or in its inser ted position the MDI-X switch per- f orms the crossover function (see Figure 7 on page 12). Figure 6. Wiring diagram for connecting the CopperLink Ethernet Extender to a 10/100Base-T hub (MDI-X switch released) Figure 7. MDI-X switc[...]

13 Figure 8. P ow er connection barrel receptacle diagram • CopperLink Ethernet Extender’s r ated v oltage: 5.0 VDC • CopperLink Ethernet Extender’s r ated current: 1 A DC External A C universal po wer supply • Output from power supply: 5 VDC , 2A • Input to power supply: universal input 100–240 V AC 50/60 Hz 0.3A External 48 VDC powe[...]

14 – 6-inch cable terminated with 2.5 mm barrel plug, center positive 3.5 CONSOLE PORT The Console P ort is only intended for use b y P atton Electronics T echnical Suppor t technicians. An approved LPS external power supply that incorpo- rates a disconnect device must be used and positioned within easy reach of the operator’ s position. Connec[...]

15 4.0 OPERATION Once the CopperLink Ethernet Extenders are proper ly installed, they should operate transparently . No user settings required. This section describes reading the LED status monitors. 4.1 FRONT PANEL LED STATUS MONITORS The Model 2157R f eatures eight front-panel LEDs that monitor power , Ethernet signals, and the CopperLink connect[...]

16 APPENDIX A SPECIFICATIONS A.1 GENERAL CHARACTERISTICS • Compact low cost plug-and-pla y router • 10/100 Ethernet • Unlimited host suppor t • Eight front panel LEDs indicate P o wer , W AN, Ether net LAN speed and status • Conv enient and standard RJ connectors f or Ethernet and line • External UI or 48 VDC po wer supply options • S[...]

17 A.4 EXTENSION DISTANCE AND RATE • 4.6 Mbps speed • Distances up to 30,000 ft (9,144 m) on 24 A WG (0.4 mm) wire • A uto-adjusting rate pic ks best rate f or a giv en e xtension distance (see tables belo w) A.5 LED INDICATORS • Eight LED indicators •P o w e r • Line Link, T r ansmit, and Receive • Ethernet Link, 100M, T ransmit, and[...]

18 A.7 TEMPERATURE RANGE • -10 to 70°C (2157R/E) • -40 to 85°C (2157R/CC/E) A.8 HUMIDITY Standard :Up to 90% non-condensing Conformal Coated: 85% condensing humidity from -10 to 35°C A.9 DIMENSIONS 1.5H x 4.13W x 3.75D in.(3.81H x 10.5W x 9.53D cm)[...]

19 APPENDIX B MODEL 2157R SERIES F ACTORY REPLACEMENT P ARTS AND ACCESSOR IES *Only required with optional UI power supply (08055DCUI) P atton Model # Description 2157R Base Models 2157R/EUI Ruggedized 4.6 Mbps CopperLink Ethernet Extender 2157R/EUI-2PK Ruggedized 4.6Mbps CopperLink Ethernet Extender Kit: includes one local (L) and one remote (R) M[...]

20 APPENDIX C MODEL 2157R SERIES INTERFACE PIN ASSIGNMENT C.1 10/100BASE-T INTERFACE RJ-45 • Pin 1: TX+ • Pin 2: TX- • Pin 3: RX+ • Pin 6: RX- • Pins 4, 5, 7, 8: no connection C.2 COPPERLINK INTERFACE RJ-11 • Pin 2: RING • Pin 3: TIP • Pins 1 & 4: no connection[...]

21 Notes ________________________________________________________ ________________________________________________________ ________________________________________________________ ________________________________________________________ ________________________________________________________ ________________________________________________________[...]

22 Notes ________________________________________________________ ________________________________________________________ ________________________________________________________ ________________________________________________________ ________________________________________________________ ________________________________________________________[...]

23 Notes ________________________________________________________ ________________________________________________________ ________________________________________________________ ________________________________________________________ ________________________________________________________ ________________________________________________________[...]

24 Notes ________________________________________________________ ________________________________________________________ ________________________________________________________ ________________________________________________________ ________________________________________________________ ________________________________________________________[...]