Pelco C1629M-F manual

INSTALLATION C1629M-F (3/08) Endura ® DVR5300 Series Digital V ideo Recorder[...]

[...]

C1629M-F (3/08) 3 Contents Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Frame Rate Notice Regarding User-Selec ted Options . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

4 C1629M-E (3/07) List of Illustrations 1 Major Package Compon en ts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2 Hard Drive Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

C1629M-F (3/08) 5 List of T ables A DVR5348/ENC5300 USB Connec tors and Colors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 B DVR5324/ENC5300 USB Connec tors and Colors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

6 C1629M-F (3/08) Regulatory Notices This device co mplies with Part 15 of the FCC Rul es. Operation is subject to the following two conditions: (1) this device may n ot cause ha rmful interference, and (2 ) this device must accept any interference received, including interference that may ca use undesired operat ion. RADIO AND TELEVISION INTERFERE[...]

C1629M-F (3/08) 7 Description The DVR5300 Series digital video recorder (D VR) represents a whole new concept in en terprise digital vi deo recording solutions. It is one of the recording co mponents of Endu ra ® , Pelco’ s most advanced integrated vi deo security system. The DVR re presents the st ate of the art in scalability , performance, ex[...]

8 C1629M-F (3/08) MODELS *All six-drive models includ e six empty hard drive carrier s. OPTIONAL ACCESSORIES ENC5316 16-channel USB video encoder , up to three ENC53 00 units per D VR5300 Serie s unit ENC5308 8-channel USB video e ncod er , up to three EN C5300 units per DVR5300 Ser ies unit SEB5100 Series Each SEB5100 Series storag e expansion box[...]

C1629M-F (3/08) 9 Before Y ou Begin Endura is a network system that re quires a contin uous amount of bandwidth to transmit tr ue, live video. Therefore, always inclu de you r network administrator when plan ning and installing Endura components. Y ou will also need the following: • Pelco-approve d En du ra certificatio n • Access to a n Endura[...]

10 C1629M-F (3/08) USER SUPPLIED PARTS In addition to the stan da rd tools and cables required for a video security insta llation, you will need to provide the following items: • Power source (1 10 to 220 VAC) • Phillips screwdriver (if moun ting the un it int o a rack) • Cat5e (or bet ter ) cable and connectors for con necting the DVR5300 to[...]

C1629M-F (3/08) 11 Figure 3. Accessory Pack Figure 4. Rack Mount Kit RA C K MOUNT KIT A CC E SS ORY P A C K FRONT BEZEL KEY 2 EA. UK S T ANDARD POWER C ORD (250 V A C ) 2 EA. U S B S TI C KER S 1 EA. EUROPEAN S T ANDARD POWER C ORD (220 V A C ) 2 EA. U S A S T ANDARD POWER C ORD (110 V A C ) 2 EA. U S B 2.0 C ABLE 3 EA. DI S PO S ABLE WRI S T S TRA[...]

12 C1629M-F (3/08) APPLICATION SCENARIOS This section illustrates two possible ap plication sce narios featur ing the DVR53 00 Series digi tal video re corder . Figure 5 shows a DVR534 8 digital video recorder with two ENC5316 USB mul tichannel vid eo encoders. I t includes NE T5301T video e nc oders (up to 16) in a hybr id digital a nd analog reco[...]

C1629M-F (3/08) 13 Figure 6. Security Network with a DVR5324, EN C5308s, and CM9700 Matrix Switch MONITOR SM5000 GIGABIT SWITCH WS5000 DVR5324 ENC5308 (UP TO 3) CM9700 SERIES MATRIX BAY CPU LIVE/ PLAYBACK CM9700MDD-EVS SERIAL LIVE/PLAYBACK CM9760-KBD[...]

14 C1629M-F (3/08) Equipment Placement and Rack Mounting UNPACKING THE DVR5300 The DVR5300 Series digital video recor de r sh ips with two smaller boxes as shown in Figure 7. One contains the ha rd drive pack. T he other contains th e accessory p ack. Figure 7. Unpacking the DVR5300 Series T o unpack the DVR5300: 1. Remove the boxes marke d HAR D D[...]

C1629M-F (3/08) 15 Figure 8. Product Serial Number Label RACK MOUNTING The DVR5300 mou nts into an in dustry-stand ard 19-inch (48 cm) equip ment rack. The D VR5300 occupie s 3 RU (rack un its) of vertica l rack space (5.25 inches or 13.3 cm). The hardwa re necessa ry to mount the DVR5300 into a rack is supplied with the unit. The rack mu st meet t[...]

16 C1629M-F (3/08) Figure 9. Fastening Mounting Brackets to Chassis 2. Attach one front-mount rail to one rear -mount rail. Ma ke sure the r ails are mounte d back to back, as shown in Fi gure 10 . Depen ding on rack depth, use either three or four 8-32 x 0. 375-inch Philli ps truss head screws fo r each rail set. Leave the screws loose until st ep[...]

C1629M-F (3/08) 17 Figure 11. Inserting Cage Nuts 5. Attach one supp or t ra il as s embl y to the equipment ra ck in the desired loca ti on (refer to Figure 12): NOTE: The suppor t rail assembl ies are identi cal and ma y be used on either the r ight or left side of the r ack. a. Position the ear of t he front-mount rail against the fron t of the [...]

18 C1629M-F (3/08) Figure 12. Attaching Support Rails 6. Repeat ste p 5 for the second support rail assemb ly . 7. Attach one rack rail spacer to the fr ont of the equipment rack (refer to Fig ure 13): a. Position th e bottom hol e of the space r above the e ar of the front-mount r ail. b. Insert two 10-32 x 0.5-inch Philli ps flat head screws into[...]

C1629M-F (3/08) 19 Figure 13. Attaching Rack Rail Spacers 8. Repeat ste p 7 for the second spacer . 9. T ighten the 8-32 x 0.375-inch Phillips tru ss head screws that were atta c hed to the front- and rear -mount rails in steps 2 and 3. 10. Place th e unit onto the mount rails by sliding th e cha ssis brackets onto the rails. This step may re quire[...]

20 C1629M-F (3/08) Figure 14. Mounting the DVR5300 into the Rack 11. After the unit is in place, tighte n th e two thumbscrews to secure the unit to the rack. Figure 15. T i ghtening the Thumbscrews WAR N IN G : When sliding out the DVR5300, be care ful not to let the unit fa ll ou t of the rack. THUMBSCREW[...]

C1629M-F (3/08) 21 Hard Drive Array Installation All DVR5300 Ser ie s recorders use RAID 5 to maximize fault toleran ce and enhance disk-access p erformance. The unit incorp orates two RAID 5 controllers; each manages an independent storage ar ray of six dr ives. If one drive fa ils, the unit continues operating and sign als the operator th at the [...]

22 C1629M-F (3/08) On six-drive mod els (1.5 TB/3.0 TB), carriers 1 thr ough 6 cont ain hard drives. Carriers 7 through 12 do not co ntain h ard drives , but should be installed to maintain prop er air circula tion in the unit. Upgrade kits are available th at increase the unit capacity o f th e si x-drive models b y 1.5 TB or 3.0 TB. Each upgrad e[...]

C1629M-F (3/08) 23 4. Make sure the hard drive carrier h as been installed cor rectly . Without squeezing the sp ring-loaded release tabs, gen tly pull th e plastic front cover of the carrier away from th e chassis. If the carrie r does no t pull out, the dr ive is secure. Figure 19. Checking Hard Disk Drive Carrier 5. Repeat steps 3 and 4 for each[...]

24 C1629M-F (3/08) Connections Familiarize yourself with the DVR5300 rear panel before connecting any equipment to the unit. Figure 20. Rear Panel Layout CONNECTING POWER The DVR5300 is equipp ed with two hot-swa ppable power supplie s. These autorang in g power supplies adapt automa tically to voltages between 100 V AC and 240 V AC (50/60 Hz). Y o[...]

C1629M-F (3/08) 25 CONNECTING ENC5300 SE RIES VIDEO ENCODERS Y ou can conne ct up to th ree ENC5300 Series vide o encoders to th e DVR5300 Series digital video recorder . A DVR5300 can record up to 24 or 48 video inputs, dependin g o n model. These inputs can be recorded from attached ENC530 0 Series vide o encoders as well as other Endura-compatib[...]

26 C1629M-F (3/08) 5. Apply a matching colo re d sti cker (red, yello w , or blue) next to the USB connector on the DVR5300 rea r pa nel. This identifies the USB cable (red, yellow , or blue) that should be connected t o this ENC5300. Figure 21. Connecting ENC5300s to a DVR5300 6. Repeat steps 1 th ro ugh 5 for the other ENC5300 units (if necessar [...]

C1629M-F (3/08) 27 Figure 22. Network Cable Connection 2. Connect the o ther end of the UTP cable to an available po rt on a Pelco-approved Gigabit Et he rnet switch. Contact Pelco’ s Prod uct Su pport for a list o f approved Gig abit Ethernet switches (refer to Appendix F: T roubleshooting on page 43 for contact infor m atio n). There are two in[...]

28 C1629M-F (3/08) Figure 23. Star (CM9760-CDU-T) Connections 2. Connect eith er end of the enclo sed STRAIGHT cable to the conn ector labeled I/O RS422 on the D VR5300 rea r panel. Th e STRAIGHT cable is 6 feet (1.8 m) and has a black STRAIGHT label. NOTES: •D o not use t he REVERSE cable t hat is included with the CM9760-CD U-T to connect t he [...]

C1629M-F (3/08) 29 Figure 24. RJ-45 Pin Assignments to CM9760-CDU-T 3. Connect the o ther end of the STRAIGHT cable to the IN connec tor on the CM9760-CDU-T . 4. T o co nnect a second or third CDU: a. Use the REVERSE cable that is included with the additional CDU. b. Connect eith er end of the RE VERSE cable to th e OUT connect or on the fir st CDU[...]

30 C1629M-F (3/08) Operation Refer to the WS5000 Oper ation manual fo r details on how to access a nd configure the DVR5300. NOTE: T o make sure that all diag nost ic me ssage s will a ppear to a system op er ator , leave at le ast one WS5 000 En dura w orksta tion or VCD 5000 video console display running at all times. During oper ation, monitor t[...]

C1629M-F (3/08) 31 UNIT STARTUP T o start the unit: 1. Unlock and ope n the bezel cover . 2. Press the power button. The power indicator glows. 3. Close and lock the bezel cov er . ì Power Indicator (Pelco badge): The Pelco badge glows blue when the unit ha s power . If the front bezel is open , this indicator glows white. î Operating Syst em Dri[...]

32 C1629M-F (3/08) Figure 27. Opening the Front Bezel Cove r UNIT SHUTDOWN Y ou can shut down the DVR5300 in e ither of two ways. An orderly s hutdown lets t he unit close it s files and power down withou t affecting the data file s. Use the or derly shutdown in most cases . An immediate sh utdown is the s ame as disconnec ting power a nd can resul[...]

C1629M-F (3/08) 33 Appendix A: Expanding V ideo Storage Y ou can increase th e video storage capacity of the DVR5300 by ad di ng one or more SEB510 0 Series storage expansion boxe s. E ach S EB5100 adds up to 6.0 TB of total capacity . Y ou can add up to e ight SEB5100 Ser ies units to exp and the tota l capacity f or each DVR5300 up to 54 TB of to[...]

34 C1629M-F (3/08) INSTALLING MULTIPLE SEB5100 UNITS (SWITCH) Use a ded icated, Pelco-approved Gi gabit Ethernet switch to expa nd the video stor ag e of the DVR5300 quickly and easily . First, c onne ct the DVR5300 to the switch. Then co nnect up t o eight SEB5100 units to the s witch. Contact Pelco’ s Prod uct Support fo r a list of ap pr oved [...]

C1629M-F (3/08) 35 INSTALLING ADDITIONAL SEB5 100 UNITS (EXISTING SWITCH) T o a dd an SEB5100 un it to an existi ng DVR5300 with a Gigabit Ether net switch: 1. Connect one end of a UTP c able to a fr ee RJ-45 po rt on the sw itch. Use a stan dard Cat5e o r better UTP ca ble with RJ-4 5 connec tors. 2. Connect the o ther end of the UTP cable to the [...]

36 C1629M-F (3/08) Appendix B: Replacing a Hard Drive Since the DVR53 00 runs cont inuously , a ha rd drive may fail at some poi nt. If this h appens, the in dicator for the failed d rive g lows red. NOTES: • The HD5000 Se ries hard dri ve replacem ent kit include s a single ha rd drive car rier with a Pe lco-certifi ed hard drive . Using any oth[...]

C1629M-F (3/08) 37 Figure 31. Removing the Hard Drive Carrier 7. Copy the dri ve number ont o the drive l abel on the replacement hard drive carrier . 8. Install th e replacemen t hard dri ve carrier a s follows: a. Orient the drive carrier so that the drive status in dicator is p ointing up. b. Align the ta pered ends of the carrier rails with the[...]

38 C1629M-F (3/08) The unit al arm stops and d rive initiali zation begins . Drive initializa tion can take up to 15 hour s. During initialization, the drive stat us indicator flashes red. Figure 32. Installing the Hard Drive Carrier NOTES: • The unit cont inues recordin g properly duri ng hard drive initialization. • Monitor the unit status in[...]

C1629M-F (3/08) 39 Appendix C: Replacing a Power Supply The DVR5300 in corporates two independe nt, hot-swap pable power supplies. Each power supply acts as a re dundant alt ernate fo r the other . This level of fau lt tolerance ensures that the DVR5300 is ca pable of susta ining uninte rruptible op eration, even if one power su pply fails. If a po[...]

40 C1629M-F (3/08) Figure 34. Removing the Power Supply 6. Orient the re placement po wer supply so th at the cord receptacle i s at the bo ttom of the unit . Figure 35. Installing the Power Supply 7. Gently push the re pla cement powe r supp ly int o th e unit until it lock s int o pla ce. 8. Connect the p ower cord for the re placement po wer sup[...]

C1629M-F (3/08) 41 Appendix D: Installing an Uninterruptible Power Supply (UPS) Y ou should connect e ach DVR5300 Serie s digital video reco rder to a UPS (not sup plied). UPS devices maint ain a limited amount of backup batte ry power in case the main power fails. The UPS should have a minimum rating of 450 V A for each DVR5300. Nearly any U PS de[...]

42 C1629M-F (3/08) Appendix E: Replacing the Operating System Drive The DVR5300 uses a compact flash drive fo r th e unit operating system. In addition to g reater reli ability, this drive can be easi ly replaced if a failure occurs. NOTES: • Y ou must shut down the unit to replac e th e operating system drive. • The unit uses a hex button so c[...]

C1629M-F (3/08) 43 Appendix F: T roubleshooting If the following in structions fail to solve yo ur problem, contact Pelco’ s Product Su pport at 1-800-289-91 00 (USA or Canada) or 1-559-292-19 81 (international) for assistance. Access the prop er ties dialog boxes for the DVR5300 digita l video recorder on the WS50 00 E ndura workstation; refer t[...]

44 C1629M-F (3/08) Specifications SYSTEM Operating Syst em Linux ® User Interface Remote operat ion from WS5000 or VCD5000 Vide o Sto rage Capacity Up to 6.98 TB, expandable using SEB5100 Interface SA T A, hot-swappab le RAID Level 5 VIDEO/AUDIO Video Standards NTSC/P AL/EIA/ CCIR composite Vide o Compression MPEG-4 Vide o Resolutions NTSC PAL 4CI[...]

C1629M-F (3/08) 45 ENVIRONMENT AL Operating T emperature 50° to 95°F (1 0° to 35°C) at un it air intake ( front of unit) Storage T emperature -40° to 1 49°F (-40° to 65 °C) Operating Humidity 20% to 80%, noncondensing Maximum Humidity Gradient 10% per ho ur Operating A ltitude -50 ft to 10,000 ft (-1 6 m to 3,04 8 m) Operating V ibration 0.[...]

[...]

PRODUCT W ARRANTY AND RETURN INFORMA TION WARRANTY Pelco will repair or replace, without c harge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • F ive years on fiber optic products and TW3000 Series unshielded twisted pair (UTP) tra[...]

W orldwide Headquarters 3500 Pelco W ay Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .pelco .com ISO 9001 Australia | Finland | France | Germany | Italy | Macau | The Netherlands | Russia | Singapore South Africa | Spain | Sweden | United Arab Emirates [...]