Pelco DVR5100 manual

INSTALLATION C1695M-B (11/08) DVR5100 Series Hybrid V ideo Recorder[...]

2 C1695M-B (11/08) Contents Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Video Quality Caution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

C1695M-B (11/08) 3 Display Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Cameras Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

4 C1695M-B (11/08) List of Illustrations 1 Major Package Compon ents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2 Accessories Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

C1695M-B (11/08) 5 60 Unsupervised Alarm Inpu t Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 61 Relays Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

6 C1695M-B (11/08) List of T ables A DVR5100 New and En hanced Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 B Analog and IP Camera Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

C1695M-B (11/08) 7 Regulatory Notices This device co mplies with Pa rt 15 of the FCC Rules. Operat ion is subject to the following two conditions: (1) this device may n ot c ause harmf ul interference, and (2 ) this device must accept any interference received, including interference that may ca use undesired operat io n. RADIO AND TELEVISION INTER[...]

8 C1695M-B (11/08) Before Y ou Begin ABOUT THE DVR5100 The DVR510 0 Series is an embedded , high-per formance hyb rid digit al video recor der (DVR), capab le of reco rding up to 2 0 ca meras a t a combined 600/500 images per secon d (NTSC/P AL) at 4CIF resolution. Th e DVR co mes with a choice of 4, 8, or 16 analog camera inp uts, and s upports 16[...]

C1695M-B (11/08) 9 NEW PRODUCT FEA TURES The DVR5100 Series V ersion 1.5 release has been enhanced with the following new features: PARTS LIST T able A. DVR5100 New and Enhanced Fe atures New Feature Description Modified User Interface New menus and o ptions make configurat ion and operatio n easier and more intuit ive. In addition, the system can [...]

10 C1695M-B (11/08) PACKAGE CONTENTS Figure 1 an d Figure 2 sh ow the content s of the maj or package c ompone nts and accessories boxes. A USB PC keyboard and mouse, and a keyboard ove rlay (templat e), are now pa rt of the D VR5100 pa ckage. Figu re 3 on page 1 1 shows the c ontents of the rack moun t kit. R ef er to th ese diagrams when installi[...]

C1695M-B (11/08) 11 Figure 3. Rack Mount Kit PRODUCT SERIAL NUMBER LABEL PLACEMENT Product serial number labels h elp Pelco Product Support identify your system and its factory configuratio n in the event that yo ur DVR5100 or it s components requir e service. Extra label s citing yo ur product ’ s serial numbe r are atta ched to you r DVR5100. O[...]

12 C1695M-B (11/08) Hardware Installation EQUIPMENT PLACEMENT AND RACK MOUNTING The DVR5100 can be plac ed on a flat surface, such as a desktop, or mounted in a n equipment rack. DESKTOP MOUNTING T o mount t he DVR5100 on a desktop: 1. Ensure that the rub ber feet are securely attach ed to the four corners of th e bottom of the unit to prevent surf[...]

C1695M-B (11/08) 13 3. Attach one front-mo unt rail to one rear -mount rail (refer to Figure 6). Place three 8- 32 x 0.375-inch Phillips truss head screws in the available holes. Leave the screws loose until s tep 8. Figure 6. Assembling a Support Rail 4. Repeat st ep 3 for the other ra il set. 5. If installing the unit into a square-hole rack, ins[...]

14 C1695M-B (11/08) e. Using two 10-32 x 0.75-inch Phillips pan h ead screws, attach the ear of the rail to th e rear of the rack. Insert the screws f rom the outside of the rack, pointing to wards the f ront. Figure 8. Atta ching Support Rails 7. Repeat step 6 for the second su pport rail assembly . 8. T ighten the 8-32 x 0.375-inch Phillips tru s[...]

C1695M-B (11/08) 15 10. After the unit is in place, tighten th e two thumbscrews to secure the unit to the rack (refer t o Figure 10). Figure 10. T ightening the Thumbscrews THUMBSCREW THUMBSCREW[...]

16 C1695M-B (11/08) Connections Familiarize yourself with the DVR5100 rear panel before connecting any equipment to the unit. The DVR5100 is available as a 4-, 8-, or 16 -analog input DVR. Figure 11 sh ows the DVR5116 rear panel for the 16 -analog input DVR. The rear panels of the 4- and 8- analog input DVR units are slightly differen t. Figure 11.[...]

C1695M-B (11/08) 17 3.5 mm Audio Jack: Provides monaural audio ou tput. Analog Video Ou tput: BNC connector for connecting a primary NTSC o r PAL monitor . DB15 VGA: VGA connector to connect a primary VGA monitor . S-Video: S-V ideo connector to connect a primary monitor . Relays 3 and 4: Relay outputs 3 and 4 for a 16-a nalog input DVR. Relays are[...]

18 C1695M-B (11/08) CONNECTING DEVICES TO THE DVR5100 CONNECTING A USB PC KEYBOARD AND MOUSE The DVR5100 provide s three USB ports: • One USB po rt on th e front pa nel • T wo USB ports on the rear panel. Connect the USB P C keyboard an d mouse to any availabl e USB port s on the DVR51 00. Use of t he keyboard/mou se allows fo r easy inst allat[...]

C1695M-B (11/08) 19 Before installi ng the DVR510 0, make sure the distance from the un it to each analog camera is le ss than the maximu m distance for the coaxial cable (refer to T able C). Refer to the D VR5100 Networ k Design Guide (C36 40M) for det ails on networki ng requirem ents for conn ecti ng IP cameras to the DVR5100. CONNECTING A DVR51[...]

20 C1695M-B (11/08) CONNECTING ANALOG CAMERAS The DVR5100 auto matically detects the video stan dard (P AL or NTSC) whenever you con nect an analog camera. It accepts both color and black-white a nalog video. NOTES: • Most cameras ha ve a line loc k feature. Enabling line lock on camer as may cause vi deo distorti on, especially if the power sour[...]

C1695M-B (11/08) 21 LOOPING VIDEO OUT The DVR5100 su pports loopin g video fo r all analog inputs. It p asses the vi deo input t o a monitor or other anal og video dev ice. T o use looping video: 1. Connect a coaxial cable to th e video out connector on the rear p anel. 2. Connect t he other en d of the coax ial cable t o the analo g device. 3. Aft[...]

22 C1695M-B (11/08) CONNECTING RELAY DEVICES Consider the following when wiring the connector: • Use a 16–26 A WG (0.14 to 1.5 mm 2 ) wire that is rated fo r 250 V or higher . The insulation must be thick enoug h to protect against electrostatic discharge ( ESD). • Strip the relay co ntrol wire to 0.3 inches (7.6 mm). • Insert the wire far [...]

C1695M-B (11/08) 23 Figure 17. Con necting a Relay Device CONNECTING ALARMS The unit includes the following: • One 8-pin alarm te rminal block for the DVR5104. • T wo 8-pin alarm terminal blocks for the DVR5 108. • Four 8-pin alarm terminal blocks for the DVR5116. These blocks have te ns ion clamps. Use a small sc rewdriver to open the clamp [...]

24 C1695M-B (11/08) T able F identifies th e terminal bl ock pin assi gnments. On t he terminal block, pin 1 is on the lef t (refer to F igure 18). These pins, labels, and leads also corres pond to alarms 5–8, 9–12 , and 13–16 on the other th ree alarm terminal blocks. T o prev ent false a larms on un used alarm in puts, lea ve the alarm in t[...]

C1695M-B (11/08) 25 T urning On the DVR5100 Press the p ower button lo cated on the right front of the DVR5100. The Pelco logo t urns blue whe n power is appli ed. During star tup, the DVR5 100 reads co nfiguration files fro m the flash card, and t hen copies t hem to a pro tected part ition on the hard disk drives. This mirroring of the operat ing[...]

26 C1695M-B (11/08) • Press Ente r [Enter/Shift or ]. The DVR5100 main ap plication win dow opens. NOTE: As a security precautio n, change the user ID for autologin as part of the configur ation and s etup process. From the Gene ral Sys tem setup screen, select the guest user ID, or create a new user ID, as the default autologin user . Either of [...]

C1695M-B (11/08) 27 LOGGING OFF Y o u can log of f from the sys tem without sh utting down t he unit. This a llows the DVR5100 t o continue re cording, an d prevents un a uthorized access to the unit. NOTE: Autologin mus t be disabl ed to log o ff from the s ystem with out shutti ng down the u nit. With a utologin di sabled, the Login dialo g box r[...]

28 C1695M-B (11/08) DVR5100 Controls and Menus The DVR5100 pro vides semitr ansparent on -screen, ico n-based menus t hat allow you to carry o ut a desired a ction while st ill viewi ng v ideo. Figure 23. DVR5100 Main Screen Icon Path: Displays the location in the menu hierarch y . Camera Information: Displays the came ra name, date an d time, and [...]

C1695M-B (11/08) 29 The DVR5100 is menu-d riven and can be operated using any o f the following options: • USB PC keyboard and mouse: A USB PC keyboard and mouse ar e now provided t o configure a nd operate th e DVR5100, whi ch is the easiest way t o operate th e unit. A t emplate is provided as a quick ref erence for keyboard sh ortcuts (re fer [...]

30 C1695M-B (11/08) • DVR5100 remote client: For advanced prog ramming and remo te access, us e the DVR5100 remote client applic ation. Refer to the DVR5100 Remote Clien t Operation manu al (C1697M) for more information. NOTE: Directions f or configurin g and operat ing the DVR510 0 are given for the USB PC keyboard and mouse, as well as the DVR5[...]

C1695M-B (11/08) 31 T able I describes the keyboard and front panel controls th at are available when co ntrolling PTZ on a select ed camera, when no on -screen menus are visibl e. Press the Enter/Shift bu tton to en ter PTZ mod e, which is indi cated by a blue border around the currently sel ected vide o pane. Y ou cannot change cameras or n aviga[...]

32 C1695M-B (11/08) T able J d escribes the keyboard an d front pane l controls av ailable when a menu or dialo g is on the screen (Menu mode). T able K d escribes th e keyboard a nd front pan el controls available when using the Quick Sear ch dialog. T able J. Menu Controls Keyboard Control Pad Function M Menu button Shows or hides on-scre en menu[...]

C1695M-B (11/08) 33 DISPLAYING AND HIDING THE SYSTEM MENUS Press the “M” key [or Menu button ] to display the Main menu. The DVR5100 Main me nu appears (refer to Figure 26). If you n avigate to a lower- level menu and the n close the menu dis play , the DVR51 00 retains th at informatio n and returns you to the same menu th e next time you open[...]

34 C1695M-B (11/08) NAVIGATING TO AND SELECTING A MENU ITEM USB PC KEYBOARD AND MOUSE T o select a menu item us ing the USB PC ke yboard and mouse: 1. Click an it em with your mouse o r use the rig ht or left arrow k ey , and then press Enter . The yellow cu rsor denot es the highlig hted menu item. Y ou can also select one of the four colored- cod[...]

C1695M-B (11/08) 35 CONTROL PAD T o enter characters using the co ntrol pad: 1. Select a field that supports ch aracter en try . 2. Press the blue function bu tton to display the on-screen keyboard. Figure 29. On-Screen Keyboard 3. Enter characters as follows: • Turn the jo g (inner dia l) to the r ight or lef t to select a character of the na me[...]

36 C1695M-B (11/08) HELP Click Help to bring up the onli ne Help dialog box; p ressing any key hides thi s dialog bo x. Figure 31. Control Pad Help Dialog Box SYSTEM INFORMATION The System I nformation dialog box pr ovides deta ils that ar e useful for t roubleshoo ting your u nit and communica ting with th e Pel co Produc t Support team. T o revie[...]

C1695M-B (11/08) 37 Basic DVR5100 Configuration SYSTEM SETUP If the Main menu is not alread y open, press the “M” key [or Menu ]. Click the Setup i con to access the System setu p screens, wh ere you can program critical aspects of the DVR510 0 (refer to Figure 34). The General Sys tem screen provid es a quick snapsh ot of critical sys tem info[...]

38 C1695M-B (11/08) DATE AND T IME SETUP Y o u can select a choice of on-screen t ime and date formats, an d the oper ating time zon e for the DVR5100 (refer t o Figure 36). B efore you rec ord any video, you must set the system time, date , and time zone . Y o u may also choos e to use an externa l time server to synchronize the DVR5100' s ti[...]

C1695M-B (11/08) 39 NETWORK SETUP Multiple DVR5100 Series DVRs can be networked for remote operat ion an d management using the TCP/IP protocol. Up to three simult aneous PC clients can be connecte d to each DVR. All remote client connec tions a re made over a secure virtua l private network (VPN) sessio n to reduce the threat of at tacks on th e D[...]

40 C1695M-B (11/08) DDNS SETUP The DVR5100 allows you to configure DDNS for your application. DDN S is a service that maps Internet domain names to IP ad dresse s. DDNS serves a s imilar purpos e to DNS. DD NS allo ws anyone hosting a W eb or FTP server to advert ise a public name to prospective users (refer to Figure 38). Refer to T able R on page[...]

C1695M-B (11/08) 41 SERIAL PORT SETUP The RS-422 serial port is the basic connector fo r communicati on between the DVR5100 and a PTZ camera when using a serial teleme try control protocol. T he speed of t he serial po rt must match t he speed pr ogrammed into the camera. Re fer to the ap propriate camera manual for serial port speed details. Refer[...]

42 C1695M-B (11/08) DISPLAY SETUP The Display screen shown in Fig ure 40 allows you to configure th e primary monitor . Refer to T able T on page 71 for more informatio n on display settings and defa ults. Figure 40. Display Screen T o select the pr imary monitor form at: 1. Under Output, select the For mat list to choose the primary monitor format[...]

C1695M-B (11/08) 43 CAMERAS SETUP Y ou can configure cameras, alarms, video, and motion settings fro m the Cameras screen. Configuration chan ges to an analog camer a can be made, even if it is not conn ected. If an IP camera is not connected, it s correspondi ng channel n umber appears wit h a red slash across it and the text in the r ight hand p [...]

44 C1695M-B (11/08) 2. If desi red, highligh t the camera i n the “Nam e” bo x and assign a display name (for example, Lobby). 3. T yp e a camera n umber in the “Came ra number” bo x. Camera number s allow the D VR5100 to quic kly pull up a c amera by its number . In addition, if the DVR5100 will b e integrated into an Endu ra system, ass i[...]

C1695M-B (11/08) 45 2. If the desired IP camer a is disabled, click Add/Edit Addresses (refer to Fig ure 44). Figure 44. IP Address Dialog Box 3. Perform one of the following actio ns: • To add an IP addr ess, type the IP address of the camera you wish to address, an d then click Add. • To edit an IP address, c lick Edit, typ e the modifi ed IP[...]

46 C1695M-B (11/08) MOTION DETECTION SETUP The DVR5100 al lows you to select thre e different zones per came ra for the b uilt-in vide o motion de tection. Each zone can be e na bled and configured independen tly . Each zon e allows an un limited numb er of area s to be desi gnated as co rrespondin g to the pa rameters of that zone. When setting u [...]

C1695M-B (11/08) 47 MOTION ALARMS SETUP Alarm sett ings for came ra motion al arms are set in dependently from other alarms. Similar to setting up alarm sett ings, you can select the severity of motion alarms, set the pre- an d post-alarm record ing for motion alarms, and cr eate a separate comment fo r logs. Figure 47. Cameras Motion Alarm Setting[...]

48 C1695M-B (11/08) RECORDING By default, the DVR5100 is config ured to re cord video from all came ras, 24 hours a da y , 7 days a week for three individual sch e dules: co ntinuous, motion, and al arm. T o op timize your stor age capacit y: • Set up schedules to activa te recording for specific cameras at certain dates an d times. • Set up a [...]

C1695M-B (11/08) 49 DELETING A RECORDING SCHEDULE T o clea r one of th e default s chedules: 1. Right-click one of the colored recording bars for a day of the week. 2. Select “Dele te schedule .” Only the selected recording s c hedule is de leted. . Figure 49. Deleting a Recording Schedule T o clear a ll recordin g schedules (Co ntinuous, M oti[...]

50 C1695M-B (11/08) 4. After selecting the camera and the recording mode, you have two basic options for creatin g the schedule: a. Setting the time manually: Select a day fr om the Day list, which contains Monday–Sund ay . After selecting the day , adjust the start and end time for that da y using the u p/down arrows. Th e timeline (graph) will [...]

C1695M-B (11/08) 51 Click "Apply Sche dule T o …" to copy the whole schedu le from one c amera to anot her camera (o r cameras) on the network. Figure 53. Applying and Reusing Schedules Selecting Reload Schedules chan ges the schedule back to recording 24 hours a d ay/7 days a week, Monday–Sunday . MODIFYING A RECORDING SCHEDULE T o m[...]

52 C1695M-B (11/08) STORAGE SETUP Y ou can configure the recording paramete rs to meet specific retention, resolut ion, and recording rate targets thro ugh the Recor ding Storage screen (refer to Figure 55). Enter a desired retention target and allow the system to modify the rate and resolution to achieve that retention target, or lock specific asp[...]

C1695M-B (11/08) 53 CAMERA SETTINGS For a high priority came ra, you may want to incr ease the resolut ion and frame rate to values highe r than the global set tings. T o save space, you may want to reduce th e resolution and frame rate for low- priority cameras. After making a camera- specific adjustment, select th e check box to lock that value i[...]

54 C1695M-B (11/08) ALARMS SETUP The DVR5100 pro vides one al arm input for e ach camera. T he alarm input s can be conf igured separa tely . Alarms ar e not dis played i n the A larm Received pop- up window unt il the specif ied alarm input is configur ed. T o mo nitor and respond to alarms, you mus t be assigned a role that includes access to the[...]

C1695M-B (11/08) 55 SUPERVISED ALARMS When an a larm is configured a s a supervised ala rm, the DVR510 0 maintains a constant electrical current th rough the a larm circui t (5.0 VDC, 10 kohms), inclu ding a 10 kohms re si stor . If the resistance changes, due to an electrical short or a bypass, t he voltage fluctuat es from its norm al state. Ther[...]

56 C1695M-B (11/08) Figure 60 illustrates th e wiring config uration for u nsupervised alarm inputs. Figure 60. Unsupervised Alarm In put Wiring SETTING UP OR RENAMING ALARMS The Alarm List pane cont ains Alarm 01–Alarm 16. Y ou may use an a larm name fro m the Alarm List , modify t he alarm name, or create a new alarm name. Th e name must co nta[...]

C1695M-B (11/08) 57 RELAYS SETUP The DVR5100 su pports up to four relay devices. Use them to tri gger extern al devices. Th e unit suppo rts both mo mentary an d conti nuou s relay operation, either nor mally open or normally cl osed (refer to Figure 61 ). Y ou can operate the relay interactively , during an active conn ec tion, or automatically to[...]

58 C1695M-B (11/08) SEQUENCE MONITOR SETUP The sequence monitor displays on ly analog camera inputs (refer to Figure 62). IP Ca meras cannot be displayed on t he sequence mon itor . Refer to T able AB on page 75 for more infor mation on sequen ce monitor settin gs and defaul ts Figure 62. Sequence Monitor Screen T o set up the sequen ce monitor: 1.[...]

C1695M-B (11/08) 59 USERS SETUP The DVR5100 al lows administ rators to create user p rofiles, assi gn one or mo re roles to ea ch user , and set p references f or the l anguage display , alarm notifi cations, and ex ported file formats (ref er to Figure 63) . The DVR5100 a llows users with a dministrator r ole permissio ns to configure user setting[...]

60 C1695M-B (11/08) T o remove a user: 1. Select the user to be deleted. 2. Select Dele te User . A confirmati on message appears. Figure 65. Delete User Dialog Box 3. Select OK. Select Canc el to close the dialog box without deleting the user . VIEWING USER PERMISSIONS T o view user permissions: 1. Select a user from the list. 2. Click View Pe rmi[...]

C1695M-B (11/08) 61 CHANGING A USER PASSWORD T o change a user pass word: 1. Click the Change Password command and the Change Password dialog box appears. Figure 67. Change Password Dialog Box 2. Use the keyboard and mo use [or the on-screen keyboard] to modify th e password as follows: a. Enter the old pass word. b. Enter the new passwo rd. c. Re-[...]

62 C1695M-B (11/08) LOGS SETUP The DVR5100 maintains a system lo g that provides an ov erview of da ily system even ts (refer to Figure 69). Each time a user logs on to th e system, an entry is written auto matica lly in the sys tem log. Ot her entries in the log tr ack alarms th at occur th roughout the da y , diagnostic information a bout devices[...]

C1695M-B (11/08) 63 5. Select the Search Log button. Th e results of your log entry search appear . Figure 69. Logs Search Screen 6. If no matching results a re found, a dialog box appears (refer to Figu re 70). Figure 70. Search Results Dialog Box[...]

64 C1695M-B (11/08) Specifications SYSTEM Operating Syst em Linux ® User Interface Semitransparent on- screen icon-based overlays VIDEO Vide o Standards Input NTSC/P AL composite Output NTSC/P AL S-Video, compo site VGA (1024 x 768) 60 Hz capability for NTSC 75 Hz capability for PAL Vide o Encoding MPEG-4 Video Inputs 4/8/16 anal og inputs; 16/12/[...]

C1695M-B (11/08) 65 AUDIO Audio Decoding G.711 speech codec Audio Bit Rate 64 kbps Audio Levels Input Line-level input Output Line-level output Audio Connector s 3.5 mm monaur al jacks Audio Input s 2 for 4- a nd 8-channe l models; 4 for 16-chann el models Audio Outputs 1 PTZ CONTROL PTZ Interface Front panel, USB keyboard/mouse, KBD500 0, or throu[...]

66 C1695M-B (11/08) ENVIRONMENT AL Operating T emperature 50° to 95°F (10° to 35°C) Storage T emperature -40° to 149°F (-40 ° to 65°C) Operating Humidity 20% to 80%, noncondensing Maximum Humidity Gradient 10% per ho ur Operating A ltitude -50 ft to 10,000 ft ( -16 m to 3 ,048 m) Operating V ibration 0.25 G at 3 Hz to 200 Hz at a sweep rate[...]

C1695M-B (11/08) 67 MODEL NUMBERS SUPPLIED ACCESSORIE S Power Cables 1 USA standard, 1 European standard, 1 UK standard Resource Disc Contains DVR5100 remote client soft ware and manuals Rack Mount Kit 1 USB keyboard/mouse/tem plate Used for configuration an d operation Model Analog Camera Inputs IP Camera Inputs Hard Drive Space (GB) Optical Drive[...]

68 C1695M-B (11/08) Appendix A: System Settings Descriptions and Defaults T able N. Main Menu Summary T able Detailed User Interface T abl es DVR5100 Configuration Menu Sub-menu T able Page Reference Sections System Setup General 68 System Setup on page 3 7 Date & T ime 69 Date and T ime Setup on page 38 Network 69 Network Setup on page 39 DDNS[...]

C1695M-B (11/08) 69 T able P . Date and T ime Settings Setting Description Default Setting Format Ti m e f o r m a t AM/PM or 24 ho urs • hh: Specifies hours (range is 00–23) • mm: Specifies minutes (range is 00–59) • ss: Specifies seconds (range is 00–59) For example, 8:30 AM and 40 se conds is expressed as: 08:30 :40. Current ti me on[...]

70 C1695M-B (11/08) Enable remote client When you se lect “Enable remote client,” you ca n connect to the DVR5100 fr om the remote client application on a PC. Remote connectivity is base d on protocol and port number . Currently , only TCP connect ions are per mitted. Th e default port number is 1194. A t otal of three remote clien ts can log o[...]

C1695M-B (11/08) 71 T able T . Display Settin gs Setting Description Default Setting Output Format: Lists the available moni tor formats: VGA, NTSC, PAL. VGA Overscan adjust: Adjusts image overscan in relation to the border surr ounding the video pane. By default, overscan is set to 1 0%. 10% On-Screen D isplay Camera name: Displays the camera name[...]

72 C1695M-B (11/08) T able V . Video Settings Setting Description Default Setting Brightness (Auto or Manual ) The brightne ss information in a picture is conveyed by the co rresponding DC level of the active video. The Br ightness con trol should be adjusted s o that black picture con tent displa ys as true black on th e monitor . Auto Saturation [...]

C1695M-B (11/08) 73 Ta b l e X . Recording Schedule Settings Setting Descri ption Default Setting Camera The Camera list con tains Cameras 01 –20. Select th e camera to be scheduled. N/A Recording Mode Options i nclude: • Continuou s •M o t i o n •A l a r m This area a llows schedulin g for 24 ho urs a day, seven days a week. N/A Set T i me[...]

74 C1695M-B (11/08) T able Z. Alarms Settings Setting Description Default Setting Alarm List Displays Al arms 01–16. When an alarm is s elected in the alarm list pa ne, the same ala rm is displayed in the “Alarm na me” text box. One progra mmable alarm in put is provi ded for eac h video inpu t. The alarm inputs are organized as follo ws: •[...]

C1695M-B (11/08) 75 T able AA. Relay Settings Setting Description Default Setting Relays Displays the numb er (default) or name of the relay . The entry highlighted in this box is directly ass ociated with the physical output number displayed in Physical out put. By default, the relay outpu ts displayed are numbered 1–4. The default entr ies in t[...]

76 C1695M-B (11/08) Move Up Move Down Allows you to move cameras up or down in the sequence. N/A Dwell T ime for (number - camera name) Sets the individual dwell time (in seconds) that video from each selected camera is displayed on the sequ ence monitor . 10 seconds T able AC. Users Settings (1 of 2) Setting Description Default Setting Add Select [...]

C1695M-B (11/08) 77 Alarm notification Allows you to customize how ea ch user responds to an alarm. • Sound Notification: Enables sound notif ication in res ponse to an alarm event. • Snooze: Allows you to set an alarm snooze t ime. When enable d, the DVR5100 displays an “Alarm Received ” message each time an al arm occurs. If you select Sn[...]

78 C1695M-B (11/08) Appendix B: Front Panel Indicators Figure 71 shows the DVR5100 front panel . Figure 71. DVR5100 Front Panel Controls Pelco Badge (power indicator) : The Pelco badge, on th e left side o f the unit , glows blue whe n the unit has power . Behind the front beze l, the power indicat or LED is white. DVD: The DVD drive that allows yo[...]

The materials used in the manufacture of this documen t and it s components are compliant to the requirements of Directive 2002/9 5/EC. This equipment contains elec trical or electronic components that must be recy cled properly to comply with Directive 2002/96/EC of the European Union regarding the disposal of waste electrica l and electronic equi[...]

Pelco, Inc. Worldwide Headquarters 3500 Pelco W ay Clovis, California 93612 USA USA & Canada T el (800) 289-9100 Fax (800) 289-9150 International T el +1 (559) 292-1981 Fax +1 (559) 348-1120 www .pelco .com[...]