Pelco PMCP660 manual

600 Series Flat Panel Plasma Monitors INSTALLATION/OPERATION C2938M (12/06)[...]

[...]

C2938M (12/06) 3 Contents Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

4 C2938M (12/06) List of Illustrations 1 Parts List Illustration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2 Rear Panel Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

C2938M (12/06) 5 Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’ s instructions. 8. Do not install ne[...]

6 C2938M (12/06) Regulatory Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RADIO AND TELEVISION INTERFERENCE This[...]

C2938M (12/06) 7 Description The 600 Series high performance plasma monitors are designed to fit the specific needs of the security industry . The plasma monitors work well using the VGA output of a Pelco ® DVR or the DVI output of an Endura ™ system. For viewing multiple cameras simultaneously in high definition quality on the plasma monitor[...]

8 C2938M (12/06) Installation The monitor can be placed on any flat surface (desk or table), or it can be wall mounted. Y ou can remove the desktop stand by removing the screws that secure it to the monitor . NOTE: Only use a recommended wall mount kit, such as the PMCP-WM, PMCP-WMT , or PMCP-WM60. T o wall-mount the monitor , follow the instructi[...]

C2938M (12/06) 9 1. External Speaker Output: Line-out connections to a pair of amplified speakers or amplifier . 2. RS-232 Connector: For authorized service use. 3. DVI Input: Connection to digital video signals from a computer or any Pelco device with DVI output, especially PMVC4 and PMVR2 multiviewers. 4. RGB (VGA) Input: Connection to RGB (VGA[...]

10 C2938M (12/06) V IDEO AND AUDIO CONNECTIONS CONNECTING S-VIDEO INPUT Refer to Figure 3. T o use S-Video input, do the following: 1. Connect the external device’ s S-V ideo (4-pin DIN) connector to the monitor’ s S-VIDEO INPUT connector . 2. Connect the device’ s red (R) and white (L) audio jacks to the monitor’ s R and L audio-in jacks o[...]

C2938M (12/06) 11 CONNECTING VIDEO INPUT Refer to Figure 5. T o use video input, do the following: 1. Connect the external device’ s jack to the monitor’ s VIDEO INPUT jack. 2. Connect the device’ s red (R) and white (L) audio jacks to the monitor’ s R and L audio-in jacks of the Video Input. Figure 5. Connecting Video Input CONNECTING MONI[...]

12 C2938M (12/06) CONNECTING DVI INPUT Refer to Figure 7. T o use DVI (Digital Video Interface) input, do the following: 1. Connect the DVI-jack of the Pelco multiviewer , Endura, or computer to the monitor’ s DVI input jack. 2. Connect the device’ s red (R) and white (L) audio jacks to the monitor’ s R and L audio-in jacks located next to th[...]

C2938M (12/06) 13 PC CONNECTIONS USING RGB (VGA) OR DVI VIDEO INPUT Refer to Figure 13. 1. Connect the PC’ s 15-pin D-Sub RGB (VGA) connector to the monitor’ s RGB-IN connector . If you have a PC that is equipped with a DVI, you can connect the PC DVI connector from the PC to the monitor’ s DVI-IN connecto r. 2. For either RGB (VGA) or DVI, c[...]

14 C2938M (12/06) SETTING UP Y OUR PC IN WINDOWS FOR USE WITH MONITOR USING A VGA CONNECTOR The display settings for a typical Windows ® -based computer are shown below . However , the actual screen on your computer will differ depending on the Windows version and video card in the computer . The basic setup will apply in most cases even though th[...]

C2938M (12/06) 15 5. If a vertical-frequency option is available, set the value to 60 Hz (refer to Figure 12). Figure 12. Plug and Play Screen 6. Click OK to complete the setting. NOTE: Both screen position and size will vary depending on the type of PC graphics card and its selected resolution.[...]

16 C2938M (12/06) Operation FRONT PANEL CONTROLS The following apply to all models. 1. INPUT : Switches between available inputs. 2. MENU: Engages the OSD (on-screen display) menu. 3. VOL: Adjusts volume up and down. These buttons also serve as navigation and adjustment keys when the OSD menu is engaged. 4.  and  : Navigates through the OSD m[...]

C2938M (12/06) 17 INSTALLING REMOTE CONTROL BATTERIES Figure 15. Battery Installation Refer to Figure 15 for the following procedure. 1. Open and remove the battery cover on the back of the remote control. 2. Install two AAA size 1.5 V batteries (supplied). Match the + and – signs on the batteries to the signs on the battery compartment. 3. Close[...]

18 C2938M (12/06) REMOTE CONTROL FUNCTIONS Figure 16. Remote Control Functions 1. MUTE: T urns on/off sound. 2. POWER: Switches the monitor from standby mode to on, and back to standby mode. 3. LOCA TE: Selects a location for the subpicture. Available in PIP (picture-in-picture) mode only . 4. SIZE: Selects a size for the subpicture. Available in P[...]

C2938M (12/06) 19 6. A.SWAP: Selects audio for the main or subpicture. Available in PIP and PBP modes only . 7. SPLIT : Selects a PIP mode (NORMAL, PIP , PBP). 8. S.SELECT : Selects the main picture or subpicture. Then you can adjust the status of the selected picture. Available in PIP and PBP modes only . When in PIP or PBP mode, this button lets [...]

20 C2938M (12/06) BASIC FUNCTIONS POWERING ON/OFF Make sure the monitor is plugged into the wall outlet with the supplied power cord. The ST A TUS LED on the control panel will glow red. 1. Press the on/off button on the front panel or the POWER button on the remote control. The monitor will turn on after a brief pause. The ST A TUS LED will turn g[...]

C2938M (12/06) 21 ADVANCED FUNCTIONS ADJUSTING PICTURE SETTINGS Y ou can make various picture adjustments by using the Picture Adjustment OSD menu. 1. Press the MENU button on the front panel or the remote control. The program displays the Image menu. 2. Press the  button to enter the selected menu group (refer to Figure 18). 3. Press the  bu[...]

22 C2938M (12/06) RESETTING PICTURE TO FACTORY DEFAULTS 1. In the Image Menu, press the  button to select Video Defaults (refer to Figure 20). 2. Press the VOL+ or VOL- button to reset the picture settings to the factory defaults. Figure 20. Factory Default Reset ADJUSTING SOUND SETTINGS Y ou can make various sound adjustments by using the Sound[...]

C2938M (12/06) 23 RESETTING SOUND TO FACTORY DEFAULTS 1. Press the  button to select Audio Defaults. 2. Press the VOL+ or VOL- button to reset the audio settings to the factory defaults (refer to Figure 22). Figure 22. Sound Defaults SELECTING LANGUAGE The monitor has multiple OSD Menu languages built in. 1. Press the MENU button on the front pa[...]

24 C2938M (12/06) ADJUSTING COLOR T EMPERATURE Y ou can change the color temperature (Kelvin) of the entire screen to suit your requirements. 1. Press the MENU button on the front panel or the remote control. 2. Press the VOL+ or VOL- button to select Setup. 3. Press the  button to enter the selected menu group. Select Color T emp (refer to Figu[...]

C2938M (12/06) 25 MINIMIZING SCREEN STICKING USING PIXEL SHIFT A difference in brightness can occur around dark or bright areas. This is due to deterioration in the fluorescent substance used in the plasma display if a fixed pattern is displayed for a long period of time; this is image sticking. A feature is built in to shift the pixels enough to[...]

26 C2938M (12/06) SELECTING ON-SCREEN DISPLAY T IMEOUT Y ou can choose how long the OSD will be shown. 1. Press the MENU button on the front panel or the remote control. 2. Press the VOL+ or VOL- button to select Setup. 3. Press the  button to enter the selected menu group (refer to Figure 28). 4. Press the  or  button to select OSD Settin[...]

C2938M (12/06) 27 CHANGING SCREEN SIZE Y ou can select the screen size that best corresponds to your viewing requirements. 1. Press the MENU button on the front panel or the remote control. 2. Press the VOL+ or VOL- button to select Screen. 3. Press the  button to enter the selected menu group. Size is selected (refer to Figure 30). 4. Press the[...]

28 C2938M (12/06) SETTING UP RGB INPUT RGB Mode Preset Y ou can access the RGB mode preset by pressing the INPUT button, as follows: 1. Press the MENU button on the front panel or the remote control. 2. Press the VOL+ or VOL- button to select Screen. 3. Press the  button to enter the selected menu group. Automatic Adjustment Y ou can adjust the [...]

C2938M (12/06) 29 VIEWING PIP Y ou can control PIP (picture-in-picture), as follows: Select PIP Mode Press SPLIT on the remote control repeatedly to select the desired mode (refer to Figure 33). Available modes are displayed in the following order: NORMAL>PIP>PBP . Figure 33. PIP Mode Select PIP Location 1. Press the LOCA TE button (refer to [...]

30 C2938M (12/06) Swap PIP Y ou can swap the main picture and PIP by pressing the SWAP button (available in PIP and PBP mode only). The two pictures are interchanged. Swap Audio Y ou can alternate between the main or PIP audio by pressing the A.SWAP (audio swap) button. (A vailable in PIP and PBP mode only .) Select Status Y ou can select main or P[...]

C2938M (12/06) 31 INFORMATION This screen displays information about Pelco headquarters. 1. Press the MENU button on the front panel or remote control. 2. Press the VOL+ or VOL– button to select Info. Figure 36. Information Screen[...]

32 C2938M (12/06) Maintenance If the quality of the picture is poor and cannot be improved by making adjustments on the front control panel, inspect all system connections and cable runs. CLEANING CAUTION Keep your hands, face, and objects away from the display’ s ventilation holes. The air being released through the exhaust holes is very hot and[...]

C2938M (12/06) 33 PICTURE IS DISTORED WITH ABNORMAL PATTERNS • Possible cause: The signal cable is not connected properly . Remedy: Make sure the signal cable is attached firmly to the back of the monitor , and from the source. • Possible cause: The input signal is beyond the monitor’ s capabilities. Remedy: Check the video signal source to [...]

34 C2938M (12/06) Supported Input Modes * PMCP660 cannot support this resolution. ** PMCP642 cannot support this resolution. PMCP660 cannot support this resolution in DVI mode. *** PMCP642 cannot support this resolution. Mode Resolution H Freq. (kHz) V Freq. (Hz) 0 720 x 400* 31.469 70.000 1 640 x 480 31.460 50.000 2 640 x 480 31.500 60.000 3 640 x[...]

C2938M (12/06) 35 Specifications MODELS PMCP642 42-inch (1,067 mm) plasma monitor PMCP650 50-inch (1,270 mm) plasma monitor PMCP660 60-inch (1,524 mm) plasma monitor GENERAL Native Resolution PMCP642 1024 X 768; XGA PMCP650, PMCP660 1366 X 768; WXGA Panel Aspect Ratio 16:9 Viewing Area PMCP642 922 x 519 mm PMCP650 1106 x 622 mm PMCP660 1320 x 742 [...]

36 C2938M (12/06) PHYSICAL Dimensions (without stand) PMCP642 4.2" D x 40.5" W x 24.6" H (10.7 x 102.8 x 62.5 cm) PMCP650 4.6" D x 47.5" W x 28.4" H (11.7 x 120.7 x 72.1 cm) PMCP660 3.7" D x 57.2" W x 34.5" H (9.4 x 145.4 x 87.6 cm) Unit Weight (without stand) PMCP642 66.1 lb (30.0 kg) PMCP650 92.6 lb (4[...]

C2938M (12/06) 37 Index A A.Swap button 19 AC power connection 9 Audio swap 30 Auto button 19 Automatic adjustment 28 C Color temperature 24 Component video input 9 Connecting component video input 10 Connecting DVI input 12 Connecting external speakers 12 Connecting monitor output 11 Connecting s-video 10 Connecting video input 11 Connections 10 D[...]

[...]

PRODUCT WARRANTY AND RETURN INFORMA TION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on FR/FT/FS Series fiber optic products and TW3000 Series unshielded twisted [...]

W orldwide Headquarters 3500 Pelco W ay Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .pelco.com ISO 9001 Australia | Canada | Finland | France | Italy | Russia | Singapore | Spain | Sweden | The Netherlands | United Arab Emirates | United Kingdom | Unit[...]