Philips BDL4221V manual

Manual file:///D|/My%20Documents/dfu/420WN6/english/420wn6/MANUAL.HTM2005-07-09 9:05:29 AM[...]

Safety & Troubleshooting Safety and Troubleshooting Information Safety Precautions and Maintenance • FAQs • Troubleshooting • Regulatory Information • Other Related Information Safety precautions and maintenance WARNING: Use of controls, adjustments or procedures other than those specified in this documentation may result in exposure to[...]

Safety & Troubleshooting ● To avoid the risk of shock or permanent damage to the set, do not expose the monitor to dust, rain, water, or excessive moisture environment. ● If your monitor gets wet, wipe it with dry cloth as soon as possible. ● If foreign substance or water gets in your monitor, please turn the power off immediately and dis[...]

About This Manual About This Manual About This Guide • Notational Descriptions About This Guide This electronic user's guide is intended for anyone who uses the Philips LCD Monitor TV. It describes the features, setup, operation and other important information. It includes the following sections: ● Safety and Troubleshooting Information pr[...]

About This Manual Notes, Cautions and Warnings Throughout this guide blocks of text may be accompanied by an icon and printed in bold or italic type. These blocks contain notes, cautions or warnings. They are used as follows: NOTE: This icon indicates important information and tips that help you make better use of your computer system. CAUTION: Thi[...]

Product Information Product Information Product Features • Technical Specifications • Resolution & Preset Modes • Philips Pixel Defect Policy • Automatic Power Saving • Physical Specification • Pin Assignment • Product Views Product Features BDL4221V ● Less management effort for maximum productivity ❍ Multiple displays form a [...]

Product Information LCD PANEL • Type TFT LCD • Screen size 42" • Pixel Pitch 0.227 x 0.681 mm • LCD Panel type 1366 x 768 pixels R.G.B. vertical stripe Hard coating surface, anti-glare polarizer • Effective viewing area 930.25 x 523.01 mm • Display Colors 8 bits interface (16.7M colors) PC SCANNING • Vertical refresh rate 47Hz-63[...]

Product Information OPTICAL CHARACTERISTICS • Contrast ratio 1100:1 (with DCR on) • Brightness 500 cd/m 2 (typ.) • Peak contrast angle 6 o'clock • White Chromaticity x: 0.283 y: 0.297 (at 9300°K) x: 0.313 y: 0.329 (at 6500°K) x: 0.328 y: 0.344 (at 5700°K) • Viewing Angle (C/R >5) Upper >89° (typ.) Lower >89° (typ.) Left[...]

Product Information Resolution & Preset Modes • Recommended 1366 x 768 at 60Hz 10 factory preset modes: Resolution Mode H. freq (kHz) V. freq (Hz) PC 640x350 VGA-1 31.469 70.086 640x480 VGA VESA 60 31.469 59.940 640x480 VGA VESA 75 37.500 75.000 720x400 IBM VGA 3H 31.468 70.087 800x600 SVGA VESA 56 35.156 56.250 800x600 SVGA VESA 60 37.879 60[...]

Product Information RETURN TO TOP OF THE PAGE Automatic Power Saving If you have VESA DPMS compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will then 'wake up' automatically[...]

Product Information • System MTBF 50K hrs (excluding CCFL 40Khrs) * This data is subject to change without notice. RETURN TO TOP OF THE PAGE Pin Assignment 1. The digital only connector (DVI-D) contains 24 signal contacts organized in three rows of eight contacts. Signal pin assignments are listed in the following table: Pin No. Signal Assignment[...]

Product Information Pin No. Assignment Pin No. Assignment 1 Red video input 9 DDC +5V 2 Green video input 10 Cable detect 3 Blue video input 11 Identical output, connected to pin 10 4 Ground 12 Serial data line (SDA) 5 NC 13 H. Sync / H+V 6 Red video ground 14 V. Sync 7 Green video ground 15 Data clock line (SCL) 8 Blue video ground 3. RS232 Connec[...]

Product Information 5 Signal Ground (SG) 1 Received Line Signal Detector (DCD) 4 DTE Ready (DTR) 9 Ring Indicator 4. SCART Connector Pin No. Signal Pin No. 1 Audio right channel output (0.5 Vrms, < 1K ohms) 2 2 Audio right channel input (0.5 Vrms, > 10K ohms) 1 3 Audio left channel output (0.5 Vrms, < 1K ohms) 6 4 Audio ground 4 5 Blue sig[...]

Product Information 13 Red signal ground 13 14 Blanking signal ground 14 15 Red signal I/O (0.7 Vp-p, 75 ohms) 15 16 Blanking signal I/O (L: < 0.4V, H: >1.0V, 75 ohms) 16 17 Composite video signal ground 18 18 Blanking signal ground 17 19 Composite video signal output (1 Vp-p, 75 ohms, sync: negative) 20 20 Composite video signal input (1 Vp-[...]

Installing your LCD Monitor/TV Installing your LCD Monitor/TV Product Description • Connecting to Your PC, TV antenna, DVD/VCR etc. • Getting Started • Optimizing Performance Product Description Installing your LCD Monitor/TV Side View (Left) file:///D|/My%20Documents/dfu/420WN6/english/420wn6/INSTALL/install.htm (1 of 6)2005-07-09 9:05:50 AM[...]

Installing your LCD Monitor/TV 1 INPUT Selecting input source 2 Increase or decrease the channel number or moving up or down to highlight the function in OSD 3 Increase or decrease the level of audio volume or moving left or right to highlight the sub-menu in the selected function of OSD 4 MENU Open the OSD or confirm the selected function 5 DC pow[...]

Installing your LCD Monitor/TV 1 Audio input for composite input Audio (left and right) in put for compo site signal in put. 2 Composite input Composite (CVBS) signal input 3 S-Video input S-Video signal input 4 Earphone output Earphone output 5 TV tuner TV tuner input (available in TV version only) RETURN TO TOP OF THE PAGE Rear View file:///D|/My[...]

Installing your LCD Monitor/TV 1 AC in AC power in 2 AC power AC power switch 3 Speakers output External speakers output 4 D-Sub output PC analog D-Sub input 5 DVI-D input PC digital input 6 D-Sub input PC analog D-Sub input 7 RS232 input RS232 network connection Input 8 RS232 output RS232 network connection output for the use of loop through funct[...]

Installing your LCD Monitor/TV 9 PC audio PC stereo audio input 10 Audio input for component signal Audio (left and right) input for component signal input 11 Component input Component (YP b P r ) signal input 12 Composite output Composite (CVBS) output for the use of loop through function 13 Audio output for composite output Audio (left and right)[...]

On Screen Display On Screen Display On Screen Display Control • Using Your Remote Control On Screen Display Controls An overall view of the On-Screen Display (OSD) structure is shown below. You can use it as a reference for further adjusting your Monitor/TV. There are two different modes of OSD available for different models: ● PC Mode ● TV M[...]

On Screen Display PC mode Selection How to use Smart Picture In PC mode ● Users can press or to toggle between ❍ Normal ❍ Warm ❍ Cool ● Press to next sub-menu selection or to return to main menu. Brightness Adjust image brightness. ● Press or to adjust, ● Press or to adjacent sub menu selections, ● Press to return to main menu. Cont[...]

On Screen Display Auto Adjust Automatic fine tuning display geometry and time frequency parameter. ● Press to start, ● A selection of Store? Yes/No will appear. ● Press or to toggle between Yes and No. ● Press to confirm and return to sub-menu. Manual Adjust Adjust display geometry and time frequency parameters. ● Phase: Press or to adjus[...]

On Screen Display Contrast Adjust image sharpness. It is adjustable only when Smart Picture is in personal mode. ● Press or to adjust, ● Press or to adjacent sub-menu selections, ● Press to return to main menu. Color Adjust image color saturation. It is adjustable only when Smart Picture is in personal mode. ● Press or to adjust, ● Press [...]

On Screen Display TV Mode Smart Sound Preset audio modes. ● Users can press or to toggle between ❍ Personal ❍ News ❍ Music ❍ Theater ● Press to next sub-menu selections ● or to return to main menu. Settings Adjust audio setting parameters. ● Users can press or to toggle between ❍ Treble ❍ Bass ❍ Balance ● Press or to adjacen[...]

On Screen Display Virtual Surround Sound Switch virtual surround effect on or off. ● Users can press or to toggle between ❍ On ❍ Off ● Press or to adjacent sub-menu selections, to return to main menu. AVL Auto Volume Limit, adjust volume level automatically to prevent sudden peak load exceeds design limit. ● Users can press or to toggle b[...]

On Screen Display PIP Sub-menu Size PIP window size adjustment. ● Users can use or to toggle between ❍ Small ❍ Medium ❍ Large ❍ PBP ❍ Off ● Press or to return to upper level sub-menu, to next selection. Video Video source of the PIP window. ● Users can use or to toggle between ❍ TV ❍ AV (CVBS) ❍ S-video ❍ EXT (Scart) ● Pre[...]

On Screen Display Source Choices of video source for main screen. ● Users can use or to toggle between ❍ PC ❍ DVI ❍ HDCP ❍ TV ❍ AV (CVBS) ❍ S-video ❍ EXT (Euro connector, Scart) ❍ HD (YPbPr) ● Press or to adjacent sub-menu selections, to return to upper level sub-menu. Zoom Choices for Zoom function. ● Users can use to enter n[...]

On Screen Display TV mode Source Choices of video source for main screen. ● Users can use or to toggle between each signal source, then press to confirm your select. ❍ PC ❍ DVI ❍ HDCP ❍ TV ❍ AV (CVBS) ❍ S-Video ❍ Ext (Euro connector, Scart) ❍ HD (YP b P r ) ● Press or to adjacent sub-menu selections to return to upper level sub-[...]

On Screen Display ❍ Super wide ● Press or to adjacent sub-menu selections to return to upper level sub-menu. Auto Lock Lock up specific channels to prevent underage viewers to watch improper TV content. ● Users can use to enter next level sub-menu. ● When you select this function for the first time, a sub-menu will appear and ask you to inp[...]

On Screen Display Change code Change program lock access code. Users need to set a four digits access code to enable the Auto Lock function. ● Use to enter code input mode ● Use number buttons to a new four-digit code ● Press to confirm and return to upper level sub menu. Clear all Clear all of the locked channels. ● Press or to toggle betw[...]

On Screen Display ● Press to confirm and to return to Zoom Type and exit to upper level sub-menu. Install: press to enter sub-menu selections. Language Choices of languages in user interfaces. ● Users can use or to toggle between ❍ ENGLISH ❍ ESPAÑOL ❍ ❍ DEUTSCH ❍ ITALIANO ❍ ● Press to adjacent sub-menu selections or to return to [...]

On Screen Display Light Sensor Turns on or off the light sensor for automatic brightness control. ● Users can use or to toggle between ❍ On ❍ Off ● Press or to adjacent sub-menu selections. Remote Control Users need to turn off remote control function when they want to use RS232 protocol to control this unit from afar, so it will remote con[...]

On Screen Display Tuner Mode Choose of tuner signal inputs. ● Users can press or to toggle between ❍ Antenna ❍ Cable ❍ Auto ● Then, press to adjacent sub-menu selections or to return to main menu. Auto Program Scan all existing channels from your tuner input. ● Press to start. ● Press or to adjacent sub-menu selections, to return to m[...]

On Screen Display Rating Movie or TV broadcasters add rating signal in the TV or movie broadcasted.Users can use this function to set up an automatic program rating and blocking mechanism to prevent underage viewers to watch improper movie or TV contents. ● Press to enter Rating sub-menu. ● Press or to adjacent sub-menu selections. Rating sub-m[...]

On Screen Display to adjacent sub-menu selections. TV Rating There are six movie ratings. ● Users can use to enter movie rating sub-menu, and use or to choose between 1) Y: all children ● Users can use or to toggle between ❍ On ❍ Off 2) Y7: Directed to older children ● Users can use or to toggle between ❍ Block ❍ FV: fantasy violence [...]

On Screen Display ❍ S: sexual situation ❍ L: strong language ❍ D: suggestive dialogue to block all programs in this rating or part of the programs with specific contents. 6) MA: Matured audience only. ● Users can use or to toggle between ❍ Block ❍ V: violence ❍ S: sexual situation ❍ L: strong language ❍ D: suggestive dialogue to b[...]

On Screen Display Caption Mode There are nine caption modes to be selected. ● Users can use or to toggle between ❍ CC1 ❍ CC2 ❍ CC3 ❍ CC4 ❍ TXT1 ❍ TXT2 ❍ TXT3 ❍ TXT4 ❍ CC Mute ● Then, press to confirm and return to upper level sub-menu. Note: The difference between CC and TXT mode is, CC shows a few lines of dialogues only whil[...]

On Screen Display TV mode (Europe, Asia Pacific models) Auto Program Scan all existing channels from your tuner input. ● Press to start. ● Press or to adjacent sub-menu selections, to return to main menu. Manual Store Select a frequency with specific channel. ● Use to enter Manual Store sub-menu, and or to select between selections. ● Then,[...]

On Screen Display System ● Users can use or to toggle between ❍ France: scans pan Europe and French TV systems ❍ Western Europe: scans pan Europe TV systems only. ● Press or to adjacent sub-menu selections, to confirm and return to upper level sub-menu. Manual Store Select a frequency with specific channel. ● Use to enter, and use or to a[...]

On Screen Display Channel Edit Choices to add or delete channels from available channels. ● Press enter Channel Edit sub-menu ● In Channel selection, use or to choose the channel that you wish to add or delete. ● Then, press to next selection, use or to toggle between ❍ Activate (add) ❍ Skip (delete) ● Repeat the above two steps to add [...]

On Screen Display Name Edit Modify the channel name from a broadcaster give one to a user preferred one. ● Users can use to enter ● Use or to select channel. ● Press to name input line. ● Use or to select from A to Z, or to adjacent alphabet. ● Press to confirm and return to upper level sub-menu. Channel Sort Sort channel name sequence in[...]

Remote Control Remote Control On Screen Display • Using Your Remote Control Using Your Remote Control file:///D|/My%20Documents/dfu/420WN6/english/420wn6/OSD/tv_control.htm (1 of 5)2005-07-09 9:05:59 AM[...]

Remote Control 1 AV source: ● To select TV/video source in TV and also PIP window. ● If TV is in Standby mode, press this button to switch to ON. 2 Mode: Screen aspect ratio, switching between 4:3, 16: 9, wide screen, and super wide. 3 Numerical keys: ● For direct access to programs. ● If TV is in Standby mode, press any number will switch [...]

Remote Control 11 ● Move the cursor right in OSD ● Adjust volume up 12 Confirm the chosen OSD function 13 Freeze: Freeze the screen in video mode or PIP. 14 Status: Display channel number, video/PC mode, and sound mode information. 15 Sound select: ● To switch between mono and stereo, or to choose between Dual I and Dual II for bilingual tran[...]

Remote Control 22 Teletext Mix: Teletext background become transparent, content mixes with images. 23 Teletext On/Off: Teletext ON or OFF. 24 Teletext Hold: Freezes the teletext page. 25 Main Index: Press the button to return to the main index. 26 Teletext Reveal/Conceal: To view the concealed text information (e.g. question/answer, quiz, etc.) sen[...]

Customer Care and Warranty Customer Care & Warranty PLEASE SELECT YOUR COUNTRY/AREA TO REVIEW DETAILS OF YOUR WARRANTY COVERAGE WESTERN EUROPE: Austria • Belgium • Cyprus • Denmark • France • Germany • Greece • Finland • Ireland • Italy • Luxembourg • the Netherlands • Norway • Portugal • Sweden • Switzerland • S[...]

Download and Print Download and Print Installing your LCD monitor driver • Download and Printing Instructions • Installing FPadjust Program Installing Your LCD monitor driver System requirements: ● PC running Windows® 95, Windows® 98, Windows® 2000 , Windows® Me, Windows® XP or later ● Find your driver ".inf/.icm/.cat" at : /[...]

Download and Print 3. Choose where you would like to save the file; click 'Save' (if prompted to save as either 'text' or 'source', choose 'source'). Printing instructions: To print the manual: 1. With the manual file open, follow your printer's instructions and print the pages you need. RETURN TO TOP OF[...]

Download and Print Download FP_setup04.exe ● From the menu that appears, choose 'Save Link As...', 'Save Target As...' or 'Download Link to Disk'. ● Choose where you would like to save the file; click 'Save' (if prompted to save as either 'text' or 'source', choose 'source').[...]

FAQs (Frequently Asked Questions) FAQs (Frequently Asked Questions) Safety and Troubleshooting • General FAQs • Screen Adjustments • Compatibility with Other Peripherals • LCD Panel Technology • Ergonomics, Ecology and Safety Standards • Troubleshooting • Regulatory Information • Other Related Information General FAQs Q: When I inst[...]

FAQs (Frequently Asked Questions) Go to your Windows Start menu. Select Settings , then Control Panel . Select Display . Move to Settings and click on the Advanced button. Under Adaptor , change the refresh rate to 56~75. You have 10 minutes to complete the operation; if you do not complete within 10 minutes, power off and re-power on monitor to en[...]

FAQs (Frequently Asked Questions) Q: What is the Auto function? A: The AUTO adjustment key restores the optimal screen position, phase and clock settings at the press of a single button – without the need to navigate through OSD menus and control keys. Note: Auto function is available in selected models only. Q: My Monitor has no power (Power LED[...]

FAQs (Frequently Asked Questions) Q: How should I clean the LCD surface? A: For normal cleaning, use a clean, soft cloth. For extensive cleaning, please use isopropyl alcohol. Do not use other solvents such as ethyl alcohol, ethanol, acetone, hexane, etc. Q: Can the Philips LCD Monitor be mounted on the wall or used as a touch panel? A: Yes. Philip[...]

FAQs (Frequently Asked Questions) Q: How do LCDs compare to CRTs in terms of radiation? A: Because LCDs do not use an electron gun, they do not generate the same amount of radiation at the screen surface. RETURN TO TOP OF THE PAGE Compatibility with other Peripherals Q: Can I connect my LCD monitor to any PC, workstation or Mac? A: Yes. All Philips[...]

FAQs (Frequently Asked Questions) set up to install peripherals. No need to go through the reverse process to unplug a device. Bottom line: USB transforms today's "Plug-and-Pray" into true Plug-and-Play! Please refer to glossary for more information about USB. Q: What is a USB hub ? A: A USB hub provides additional connections to the[...]

FAQs (Frequently Asked Questions) A: Polarization is basically directing light to shine in one direction. Light is electromagnetic waves. Electric and magnetic fields oscillate in a direction perpendicular to the propagation of the light beam. The direction of these fields is called the 'polarization direction'. Normal or non-polarized li[...]

FAQs (Frequently Asked Questions) crystal. When each cell is connected with electrodes and impressed with voltage, the molecular structure of the liquid crystal is altered and controls the amount of inlet lighting to display images. A TFT LCD has several advantages over a CRT, since it can be very thin and no flickering occurs because it does not u[...]

FAQs (Frequently Asked Questions) A: Unlike a CRT, an LCD monitor does not have key parts that generate Electro Magnetic Interference, especially magnetic fields. Also, since an LCD display utilizes relatively low power, its power supply is extremely quiet. RETURN TO TOP OF THE PAGE Ergonomics, Ecology and Safety Standards Q: What is the CE mark? A[...]

Troubleshooting Troubleshooting Safety and Troubleshooting • FAQs • Common Problems • TV and Audio Problems • Video Problems • Remote Control Problems • Product Specific Problems • OSD Warning Message • Regulatory Information • Other Related Information This page deals with problems that can be corrected by the user. If the proble[...]

Troubleshooting Shaky/Jittery Video Wavy picture or fine movement ● Auto adjust image through Menu -> Image Setting -> Auto Adjust ● Adjust Phase and Clock controls via OSD ● Perform the LCD Monitor TV factory reset (via Menu -> Factory Reset -> All Settings) ● Check environmental factors ● Relocate and test in other room Miss[...]

Troubleshooting Horizontal/Vertical Lines Screen has one or more lines ● Perform the LCD Monitor TV reset ● Auto adjust image through Menu -> Image Setting -> Auto Adjust ● Adjust Phase and Clock controls via OSD ● Perform the LCD Monitor TV self-test feature check and determine if these lines are also in self-test mode ● Check for [...]

Troubleshooting TV and Audio Problems Poor TV signal reception Abnormal picture seen from the screen ● The proximity of mountains or high buildings may be responsible for ghost pictures, echoing or shadows. In this case, try manually adjusting your pictures: see 'fine tuning' or adjust the direction of the outside aerial. For Asia users[...]

Troubleshooting No Video No signal indicator is displayed. ● Check Video Input Selection ❍ Composite: Yellow colored RCA jack ❍ S-Video: Typically a round 4 pin jack ❍ Component: Typically 3 RCA jacks of Green, Red and Blue. ● Make sure you did not plug the video cable to video output port behind the LCD monitor TV. Low Quality DVD playba[...]

Troubleshooting Cannot adjust the LCD Monitor TV with the buttons at the side of the unit OSD does not appear on the screen ● Turn the LCD Monitor TV off and unplug the power cord and then plug back and power on. For further assistance, refer to the Consumer Information Centers list and contact your local Philips distributor. RETURN TO TOP OF THE[...]

Troubleshooting This message means that there is no video input signal. The LCD Monitor TV is in a power saving mode (in PC mode). The main OSD menu is unlocked. The main OSD menu is locked. RETURN TO TOP OF THE PAGE file:///D|/My%20Documents/dfu/420WN6/english/420wn6/SAFETY/saf_troub.htm (7 of 7)2005-07-09 9:06:11 AM[...]

Regulatory Information Regulatory Information CE Declaration of Conformity • Display Power Management Signaling • Federal Communications Commission (FCC) Notice (U.S. Only) • Commission Federale de la Communication (FCC Declaration) • EN 55022 Compliance (Czech Republic Only) • VCCI Class 2 Notice (Japan Only) • MIC Notice (South Korea [...]

Regulatory Information RETURN TO TOP OF THE PAGE Display Power Management Signaling BDL4221V This monitor is equipped with a function for saving energy which supports the VESA Display Power Management Signaling (DPMS) standard. This means that the monitor must be connected to a computer which supports VESA DPMS to fulfill the requirements in the NU[...]

Regulatory Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and[...]

Regulatory Information Cet équipement a été testé et déclaré conforme auxlimites des appareils numériques de class B,aux termes de l'article 15 Des règles de la FCC. Ces limites sont conçues de façon à fourir une protection raisonnable contre les interférences nuisibles dans le cadre d'une installation résidentielle. CET appa[...]

Regulatory Information RETURN TO TOP OF THE PAGE VCCI Notice (Japan Only) This is a Class B product based on the standard of the Voluntary Control Council for Interference (VCCI) for Information technology equipment. If this equipment is used near a radio or television receiver in a domestic environment, it may cause radio Interference. Install and[...]

Regulatory Information Please note that this device has been approved for non-business purposes and may be used in any environment, including residential areas. RETURN TO TOP OF THE PAGE Polish Center for Testing and Certification Notice The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All eq[...]

Regulatory Information RETURN TO TOP OF THE PAGE North Europe (Nordic Countries) Information Placering/Ventilation VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS. Placering/Ventilation ADVARSEL: SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG STIKKONTAKT ER NEMT TILGÆNGELIGE. [...]

Regulatory Information RETURN TO TOP OF THE PAGE BSMI Notice (Taiwan Only) RETURN TO TOP OF THE PAGE Ergonomie Hinweis (nur Deutschland) Damit Ihr Monitor immer den in der Zulassung geforderten Werten entspricht, ist darauf zu achten, daß 1. Reparaturen nur durch Fachpersonal durchgeführt werden. 2. nur original-Ersatzteile verwendet werden. 3. b[...]

Regulatory Information your product to increase the amount of reusable materials and to minimize the amount to be disposed of. Please find out about the local regulations on how to dispose of your old monitor from your local Philips dealer. (For customers in Canada and U.S.A.) This product may contain lead and/or mercury. Dispose of in accordance t[...]

Regulatory Information How to connect a plug The wires in the mains lead are coloured in accordance with the following code: BLUE - "NEUTRAL" ("N") BROWN - "LIVE" ("L") GREEN & YELLOW - "EARTH" ("E") 1. The GREEN AND YELLOW wire must be connected to the terminal in the plug which is ma[...]

Regulatory Information This marking on the product or on its packaging illustrates that, under European Directive 2002/96/EG governing used electrical and electronic appliances, this product may not be disposed of with normal household waste. You are responsible for disposal of this equipment through a designated waste electrical and electronic equ[...]

Other Related Information Other Related Information Safety and Troubleshooting • FAQs • Troubleshooting • Regulatory Information • Information for Users in the U. S . • Information for Users Outside the U.S Information for Users in the U. S. For units set at 115 V : Use a UL Listed Cord Set consisting of a minimum 18 AWG, Type SVT or SJT [...]

Philips Pixel Defect Policy Philips Pixel Defect Policy Product Features • Technical Specifications • Resolution and Preset Modes • Automatic Power Saving • Physical Specification • Pin Assignment • Product Views Philips' LCD Panel Pixel Defect Policy Philips strives to deliver the highest quality products. We use some of the indus[...]

Philips Pixel Defect Policy Types of Pixel Defects Pixel and sub pixel defects appear on the screen in different ways. There are two categories of pixel defects and several types of sub pixel defects within each category. Bright Dot Defects Bright dot defects appear as pixels or sub pixels that are always lit or 'on'. That is, a bright do[...]

Philips Pixel Defect Policy One dark sub pixel Two or three adjacent dark sub pixels Proximity of Pixel Defects Because pixel and sub pixels defects of the same type that are near to one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects. Pixel Defect Tolerances In order to qualify for repair or rep[...]

Philips Pixel Defect Policy Tiny bright dots less then 50% R/B, 30% G Max 4 * Bright Dot is defined as dots (sub-pixels) which appeared brightly in the screen when the LCM displayed with whole pattern & Bright Dot's brightess is defined over 50% of the brightness against around. (but, Green bright dot is over 30% of brightness against arou[...]

Connecting to Your PC, TV Antenna, DVD/VCR etc. Connecting to Your PC, TV Antenna, DVD/VCR etc. Product Description • Accessory Pack • Connecting to Your PC, TV Antenna, DVD/VCR etc. • Getting Started • Optimizing Performance Accessory Pack Unpack all the parts Power cable Remote control & batteries DVI-D cable VGA signal cable E-DFU pa[...]

Connecting to Your PC, TV Antenna, DVD/VCR etc. Base Screw pack 2x10 W Detachable Speakers RETURN TO TOP OF THE PAGE Setting up and connecting your monitor/TV CAUTION: Ensure that the power to the monitor/TV is switched off before the installation. - Connecting the monitor/TV ● Connect the cables to the rear of your monitor/TV according to the nu[...]

Connecting to Your PC, TV Antenna, DVD/VCR etc. TV model RETURN TO TOP OF THE PAGE - Connect to PC ● Connect the cables to the back of your computer by following step 1~5. ● If your monitor displays the computer image the installation has been completed successfully. ● If installation was not successful, see the Troubleshooting section. ● F[...]

Connecting to Your PC, TV Antenna, DVD/VCR etc. RETURN TO TOP OF THE PAGE - Connect to DVD/VCD/VCR Connect to DVD/VCR/VCD through S-VIDEO ● Connect to DVD/VCR/VCD through S-VIDEO ● Connect to DVD/VCR /VCD through SCART (for Europe only) file:///D|/My%20Documents/dfu/420WN6/english/420wn6/INSTALL/CONNECT.HTM (4 of 8)2005-07-09 9:06:30 AM[...]

Connecting to Your PC, TV Antenna, DVD/VCR etc. ● Connect to DVD/VCR /VCD through composite video (CVBS) ● Connect to DVD/VCR /VCD through component video (YPbPr) file:///D|/My%20Documents/dfu/420WN6/english/420wn6/INSTALL/CONNECT.HTM (5 of 8)2005-07-09 9:06:30 AM[...]

Connecting to Your PC, TV Antenna, DVD/VCR etc. RETURN TO TOP OF THE PAGE Connecting to Cable TV Antenna file:///D|/My%20Documents/dfu/420WN6/english/420wn6/INSTALL/CONNECT.HTM (6 of 8)2005-07-09 9:06:30 AM[...]

Connecting to Your PC, TV Antenna, DVD/VCR etc. Progressive video and HDTV connections for digital high-definition picture file:///D|/My%20Documents/dfu/420WN6/english/420wn6/INSTALL/CONNECT.HTM (7 of 8)2005-07-09 9:06:30 AM[...]

Connecting to Your PC, TV Antenna, DVD/VCR etc. RETURN TO TOP OF THE PAGE file:///D|/My%20Documents/dfu/420WN6/english/420wn6/INSTALL/CONNECT.HTM (8 of 8)2005-07-09 9:06:30 AM[...]

Getting Started Getting Started Product Description • Connecting to Your PC, TV Antenna, DVD/VCR etc. • Driver Installation • Optimizing Performance Driver Installation Use the information file ( .inf) for Windows® 95/98/2000/Me/XP or later The built-in VESA DDC2B feature in Philips Monitors supports Plug & Play requirements for Windows?[...]

Getting Started For Windows® Me 1. Start Windows® Me 2. Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'. 3. Double click on the 'Display' Icon. 4. Select the 'Settings' tab then click on 'Advanced...'. 5. Select 'Monitor' button, then click o[...]

Getting Started - If the 'Properties' button is active, click on 'Properties' button. Please follow the steps below. 7. Click on the 'Driver' tab and then click on 'Update Driver...' button. 8. Select the 'Install from a list or specific location [advanced]' radio button and then click on the '[...]

Your Philips F1rst Choice Warranty Your Philips F1rst Choice Warranty Thank you for purchasing this Philips monitor. All Philips monitors are designed and manufactured to high standards and deliver high-quality performance, ease of use and ease of installation. Should you encounter any difficulties while installing or using this product, please con[...]

Your Philips F1rst Choice Warranty ● Damage is caused by accidents including but not limited to lightning, water or fire, misuse or neglect; ● Reception problems caused by signal conditions or cable or antenna systems outside the unit; ● Defects caused by abuse or misuse of the monitor; ● Product requires modification or adaptation to enabl[...]

Your Philips F1rst Choice Warranty Information. Or you can reach us via: Website: http://www.philips.com/support file:///D|/My%20Documents/dfu/420WN6/english/warranty/war_1st.htm (3 of 3)2005-07-09 9:06:36 AM[...]

International Guarantee Your International Guarantee Dear Customer, Thank you for purchasing this Philips product which has been designed and manufactured to the highest quality standards. If, unfortunately, something should go wrong with this product Philips guarantees free of charge labor and replacement parts irrespective of the country where it[...]

United States Guarantee PHILIPS LIMITED WARRANTY One (1) Year Labor and Parts Repair PHILIPS CONSUMER ELECTRONICS warrants this product against defect in material or workmanship, subject to any conditions set forth as follows: PROOF OF PURCHASE: You must have proof of the date of purchase to receive war- ranted repair on the product. A sales receip[...]

F1rst Choice Contact Information F1rst Choice Contact Information Country Telephone number Tariff Austria 0820 901115  0.20 Belgium 070 253 010  0.17 Cyprus 800 92256 Free of Charge Denmark 3525 8761 Local call tariff Finland 09 2290 1908 Local call tariff France 08 9165 0006  0.23 Germany 0180 5 007 532  0.12 Greece 00800 3122 1223 Loc[...]

Consumer Information Centers Consumer Information Centers Antilles • Argentina • Australia • Bangladesh • Brasil • Canada • Chile • China • Colombia • Belarus • Bulgaria • Croatia • Czech Republic • Estonia • Dubai • Hong Kong • Hungary • India • Indonesia • Korea • Latvia • Lithuania • Malaysia • Mexic[...]

Consumer Information Centers CROATIA Renoprom d.o.o. Mlinska 5, Strmec HR - 41430 Samobor Tel: +385 1 333 0974 ESTONIA FUJITSU SERVICES OU Akadeemia tee 21G EE-12618 Tallinn Tel: +372 6519900 www.ee.invia.fujitsu.com HUNGARY Serware Szerviz Vizimolnár u. 2-4 HU - 1031 Budapest Tel: +36 1 2426331 Email: inbox@serware.hu www.serware.hu LATVIA Servic[...]

Consumer Information Centers ROMANIA Blue Ridge Int'l Computers SRL 115, Mihai Eminescu St., Sector 2 RO - 020074 Bucharest Tel: +40 21 2101969 SERBIA & MONTENEGRO Tehnicom Service d.o.o. Bulevar Vojvode Misica 37B YU - 11000 Belgrade Tel: +381 11 3060 886 SLOVAKIA Datalan Servisne Stredisko Puchovska 8 SK - 831 06 Bratislava Tel: +421 2 4[...]

Consumer Information Centers TURKEY Türk Philips Ticaret A.S. Yukari Dudullu Org.San.Bolgesi 2.Cadde No:22 34776-Umraniye/Istanbul Tel: (0800)-261 33 02 UKRAINE Comel Shevchenko street 32 UA - 49030 Dnepropetrovsk Tel: +380 562320045 www.csp-comel.com Latin America ANTILLES Philips Antillana N.V. Kaminda A.J.E. Kusters 4 Zeelandia, P.O. box 3523-3[...]

Consumer Information Centers CHILE Philips Chilena S.A. Avenida Santa Maria 0760 P.O. box 2687Santiago de Chile Phone: (02)-730 2000 Fax : (02)-777 6730 COLOMBIA Industrias Philips de Colombia S.A.-Division de Servicio CARRERA 15 Nr. 104-33 Bogota, Colombia Phone:(01)-8000 111001 (toll free) Fax : (01)-619-4300/619-4104 MEXICO Consumer Information [...]

Consumer Information Centers PERU Philips Peruana S.A. Customer Desk Comandante Espinar 719 Casilla 1841 Limab18 Phone: (01)-2136200 Fax : (01)-2136276 URUGUAY Rambla O'Higgins 5303 Montevideo Uruguay Phone: (598) 619 66 66 Fax: (598) 619 77 77 Customer Desk: Phone: 0004054176 VENEZUELA Industrias Venezolanas Philips S.A. Apartado Postal 1167 [...]

Consumer Information Centers AUSTRALIA Philips Consumer Electronics Consumer Care Center Level 1, 65 Epping Rd North Ryde NSW 2113 Phone: 1300 363 391 Fax : +61 2 9947 0063 NEW ZEALAND Philips New Zealand Ltd. Consumer Help Desk 2 Wagener Place, Mt.Albert P.O. box 1041 Auckland Phone: 0800 477 999 (toll free) Fax : 0800 288 588 Asia BANGLADESH Phil[...]

Consumer Information Centers HONG KONG Philips Electronics Hong Kong Limited Consumer Service Unit A, 10/F. Park Sun Building 103-107 Wo Yi Hop Road Kwai Chung, N.T. Hong Kong Phone: (852)26199663 Fax: (852)24815847 INDIA Phone: 91-20-712 2048 ext: 2765 Fax: 91-20-712 1558 BOMBAY Philips India Customer Relation Centre Bandbox House 254-D Dr. A Besa[...]

Consumer Information Centers INDONESIA Philips Group of Companies in Indonesia Consumer Information Centre Jl.Buncit Raya Kav. 99-100 12510 Jakarta Phone: (021)-7940040 ext: 2100 Fax : (021)-794 7511 / 794 7539 KOREA Philips Korea Ltd. Philips House C.P.O. box 3680 260-199, Itaewon-Dong. Yongsan-Ku, Seoul 140-202 Phone: 080 600 6600 (toll free) Fax[...]

Consumer Information Centers PHILIPPINES PHILIPS ELECTRONICS & LIGHTING, INC. Consumer Electronics 48F PBCOM tower 6795 Ayala Avenue cor VA Rufino St. Salcedo Village 1227 Makati City, PHILS Phone: (02)-888 0572, Domestic Toll Free: 1-800-10-PHILIPS or 1-800-10-744 5477 Fax: (02)-888 0571 SINGAPORE Accord Customer Care Solutions Ltd Authorized [...]

Consumer Information Centers MOROCCO Philips Electronique Maroc 304,BD Mohamed V Casablanca Phone: (02)-302992 Fax : (02)-303446 SOUTH AFRICA PHILIPS SA (PTY) LTD Customer Care Center 195 Main Road Martindale, Johannesburg P.O. box 58088 Newville 2114 Telephone: +27 (0) 11 471 5194 Fax: +27 (0) 11 471 5123 E-mail: phonecare.za@philips.com Middle Ea[...]