Philips Fidelio BTS7000 manual

BTS7000 User man ual Register your pr oduct and get support at www .philips.com/w elcome Alwa ys there to help y ou Ques tion? Cont ac t Philips[...]

[...]

1 EN Contents 1 Important 2 Safety 2 Care for y our product 3 Care of the environment 3 Compliance 3 Help and suppor t 3 Mains fuse 4 2 Y our produc t 5 Main unit 5 Remote control 5 Connector s 7 3 Connect and set up 9 Connect the main unit 9 Place speaker s 9 Connect to TV 9 Connect audio from TV and other devices 10 4 Use your pr oduct 11 Adjust [...]

2 EN 1 Impor tant Read and under stand all instr uctions before you use your product. If damage is caused b y failure to follow instructions, the war r anty does not apply . Safety Riskofelectricshockorre! • Never expose the product and accessories to rain or water . Never place liquid container s, such as vases, near the pro[...]

3 EN Car e for y our product • Useonlymicroberclothtocleanthe product, such as removing dust and shedding accumulated on the speaker cloth. Do not use any cleaning solv ent to clean the wooden panels and speak er cloth. • The wooden panels ma y var y on color and grain patter n due to the use of natur al materials.[...]

4 EN Mains fuse This information applies only to products with a UK mains plug. Thisproductisttedwithanapprov edmolded plug. If you replace the fuse, use one with: • the ratings shown on the plug, • a BS 1362 approval, and • the AST A approval mark. Contact your dealer if y ou are not sure about what type o[...]

5 EN 2 Y our pr oduct Congratulations on your purchase , and welcometoPhilips! T ofullybenetfromthe suppor t that Philips offers, register your product at www .philips.com/welcome . Main unit This product is comprised of left and r ight speaker s. a Red/white/blue LEDs Red LED • Lights up when this product is switche[...]

6 EN a (Standby-On) • Switch this product on or to standby . • When EasyLink is enabled, press and hold for at least three seconds to switch all connected HDMI CEC compliant devices to standby . b Source buttons HDMI ARC : Switch your source to HDMI ARC connection Bluetooth : Switch to Bluetooth mode; Press and hold three seconds to break[...]

7 EN 1 Open the batter y compar tment. 2 Inser t one CR2025 batter y , with the polarity (+/-) as indicated. 3 Close the batter y compar tment. Connectors This section includes an ov er view of the connector s availab le on this product. 3 1 2 On the left speak er a AUDIO IN Audio input from, for example, an MP3 play er (3.5mm jack). b USB connecto[...]

8 EN On the right speak er a T O L SPEAKER Connect to the left speaker . b A C MAINS~ Connect to the pow er supply . a b[...]

9 EN 3 Connect and set up This section helps you connect this product to a TV and other devices, and then set it up. For information about the basic connections of this product and accessories, see the quick star t guide . Note • Foridenticationandsupplyratings, seethetypeplate at the back or bottom of the product. ?[...]

10 EN 1 Using a High Speed HDMI cable , connect the HDMI ARC connector on the left speaker to the HDMI (ARC) input on the T V. • The HDMI ARC connector on the TV might be labeled differently . For details, see the TV user manual. 2 On your TV , turn on HDMI-CEC operations. For details, see the TV user manual. Note • If your TV is not HDMI AR[...]

11 EN 4 Use y our pr oduct This section helps you use this product to pla y audio from connected devices. Befor e you start • Make the necessar y connections descr ibed in the quick star t guide and the user manual. • Switch this product to the correct source for other devices. Adjust the v olume 1 Press VOL +/- to increase or decrease a [...]

12 EN Pla y music via Bluetooth Through Bluetooth, connect your product with a Bluetooth device (such as an iPad, iPhone , iP od touch, Android phone , or laptop), and then youcanlistentotheaudiolesstoredonthe device through the speaker s of this product. What you need • A Bluetooth device which suppor ts Bluet[...]

13 EN Auto standby If no audio/video playback is detected from a connected device for 30 minutes, this product automatically switches to standb y . Apply factor y settings Y ou can reset this product to the default settings programmed at the factor y . 1 In OPTIC AL mode, press and hold RESET forveseconds. » When the factor y settings [...]

14 EN 5 Update softwar e T o get the best features and suppor t, update your product with the latest software. What you need • Connect this product to your TV . Check softwar e version • In any source mode, press TREBLE - , B ASS - and V OL - on the remote control. Update softwar e via USB 1 Check the latest software ver sion on www . phi[...]

15 EN 6 Pr oduct specifications Note • Specicationsanddesignaresubjecttochangewithout notice. Amplier • T otal output power : 100W RMS (+/- 0.5 dB, 30% THD) / 80W RMS (+/- 0.5 dB, 10% THD) • Frequency response: 63 Hz-20 kHz / ±3 dB • Signal-to-noise ratio: > 65 dB (CCIR) / (A-weighted) • Input[...]

16 EN 7 T r oubleshooting W arning • Risk of electric shock. Never remov e the casing of the product. T o keep the war ranty valid, never tr y to repair the product yourself. If you ha ve prob lems using this product, check the following points bef ore you request ser vice. If you still ha ve a prob lem, get suppor t at www . philips.com/suppor t[...]

Specifications are subject to change without notice 2013 © W OO X Innovations Limited. All rights reserved. Philips and the Philips’ Shield Emblem are r egistered trademarks of K oninklijke Philips N.V . and are used by WOO X Innovations Limited under license fr om K oninklijke Philips N.V . BTS7000_12_UM_V1.0[...]