Planar PX2210MW manual

PX2210MW[...]

1195 NW Compton Drive Beaverton, OR 97006-1992 www.planar.com Customer Service Planar provides the following technical support services: Internet Support For support available 24/7 visit Planar's Online Technical Support at www.planar.com/support. Our Online Technical Support is where you'll find solutions to many common problems, downloa[...]

1[...]

2 The information contained in this document is subject to change without notice. This document contains proprietary informa tion that is protected by copyright. All rights are reserved. No part of this document may be reproduc ed, translated to another language or stored in a retrieval system, or transmitted by any means, electronic , mechanical, [...]

3[...]

4 TABLE OF CONTENTS For Your Safety For Your Safety -----------------------------------------------------------5 General Notes Special notes on LCD monitors ----------------------------------------- 7 Other notes ------------------------------------------------------------ 7 Before You Operate The Monitor Features ----------------------------------[...]

5 FOR YOUR SAFETY Before operating the monitor, pleas e read this manual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested and found to comply w ith the limits for a Class B digital device, pursuant to Pa rt 15 [...]

6 z Do not use the monitor near water, e.g. near a bathtub, w ashbow l, kitchen sink, laundry tub, sw imming pool or in a wet basement. z Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can injure a person and c ause serious damage to the appliance. Use only a cart or stand recommended by the manufacturer or [...]

7 GENERAL NOTES The following symptoms are normal w ith LCD monitor and do not indicate a problem. • Due to the nature of the fluoresc ent light, the screen may flicker during initial use. Turn off the Power Sw it ch and then turn it on again to make sure the flicker disappears. • You may find slightly uneven br ightness on the screen depending[...]

8 BEFORE YOU OPERATE THE MONITOR • 2 2 ” ( 55.87 cm) TFT Color LCD Monitor • Crisp & Clear Display for Window s • Recommended Resolution: 16 8 0 X 1 05 0 @ 60Hz • Ergonomic Design wi th Tilt Adjustable Stand • Space Saving, Compact Case Design The product package should include the follow i ng items: Monitor Base User Manual Power C[...]

9 INSTALLATION INSTRUCTIONS Pow er Source: 1. Make sure that the power cord is the correct type required in your area. 2. This LCD monitor has an internal Universal Power Supply that allow s operation in either 100/120V AC or 220/240V AC voltage area (No user adjustment is required.) 3. Connect the AC-power cord into y our LCD monitor’s AC-power-[...]

1 0 INSTALLATION INSTRUCTIONS (cont.) Connecting The Cables Figure 2 Connecting Cables 1. AC Power Cord 4 . 15-pin D-SUB Cable 3. DVI Cable Turn off your computer befor e performing the procedure below . 1. Connect the female end of the AC pow er cord to the AC-in port on the back of the monitor. Connect the other end to a nearby AC-outlet. 2. Conn[...]

1 1 INSTALLATION INSTRUCTIONS (cont.) Tilt Adjustment For optimal viewing it is recommended to l ook at the full face of the monitor, then adjust the monitor's angl e to your ow n preference. Hold the stand so you do not toppl e the monitor w hen you change the monitor's angle. You are able to adjust the monitor's angle from -5° to [...]

1 2 OPERATING INSTRUCTIONS EXTERNAL CONTROLS Figure 4 - External Controls 1. -/ Volume Control 5. 2. +/ Volume Control Power Button 3. SELECT 4. 1<->2/RESET • Pow er Button: Press this button to turn the monitor ON or OFF. • SELECT : Activates OSD menu or confirms function. • + / Volume: Increase volume or adjust function . • - / V[...]

1 3 OPERATING INSTRUCTIONS (cont.) • 1<->2/RESET : 1. When OSD menu is in active stat us, this button w ill act as EXIT-KEY (EXIT OSD menu) or go back to the previous menu. 2. When OSD menu is in off status, press this button for 2 seconds to activate the Auto Adjustment function ,press this button 7 seconds to The Auto Adjustment function [...]

1 4 OPERATING INSTRUCTIONS (cont.) How To Adjust A Setting 1. Press the SELECT -button to activate the OSD window (Figure 5). 2. Press ＋　 or － to navigate through the functions. Once the desired function is highlighted, press t he SELECT -button to activate it. If the function selected has a sub-menu, press + or － again to navigate through [...]

1 5 OPERATING INSTRUCTIONS (cont.) The descriptions for function control LEDS Main Menu Item Main Menu Icon Sub Menu Item Sub Menu Icon Description Contrast Contrast from Digital-register. Luminance Brightness Backlight Adjustment Focus Adjust Picture Phase to reduce Horizontal-Line noise Image Setup Clock Adjust picture Clock to reduce Vertical-Li[...]

1 6 OPERATING INSTRUCTIONS (cont.) Main Menu Item Main Menu Icon Sub Menu Item Sub Menu Icon Description H. Position Adjust the horizontal position of the OSD. V. Position Adjust the verticalposition of the OSD. OSD Setup OSD Timeout Adjust the OSD timeout. Language Language N/A Set OSD language Information Information N/A Show the resolution, H/V [...]

1 7 TECHNICAL SUPPORT (FAQ) Problem & Question Possible Solution Power LED is not on *Check if the Pow er Switch is in the ON position *Power Cord should be connected No Plug & Play *Check if the PC system is Plug & Play compatible *Check if the Video Card is Plug & Play compatible *Check if the D-15 plug pin of Video Cable is bent [...]

1 8 TECHNICAL SUPPORT (FAQ) (cont.) CLOCK (pixel frequency) controls the number of pixels scanned by one horizontal sweep. If the frequency is not correct, the screen shows vertical stripes and the picture has not correct width. FOCUS adjusts the phase of the pixel clock signal. With a w rong phase adjustment the picture has horizontal disturbances[...]

19 APPENDIX SPECIFICATIONS Driving system TFT Color LCD LCD Panel Size 5 5.87 cm(2 2 ") Pixel pitch 0.2 82 mm( H )x 0.2 82 mm( V ) R,G,B Analog Interface Video Digital interface H-Frequency 3 1 KHz – 80 K Hz V-Frequency 5 6 -75Hz Display Colors 16.7M Colors Dot Clock 16 5 MHz Max. Resolution 1 68 0 x 1 05 0 @ 60Hz Plug & Play VESA DDC2B [...]

2 0 APPENDIX (cont.) Switch • 1<->2/RESET • Volume • Volume • SELECT • Power Button External Controls: Functions • Contrast • Brightness • Focus • Clock • H.Position • V.Position • ( Warm ) Color • (C ool )Color • SRGB Color temperature • User • Input signal Selection • OSD Setup • Language • Display info[...]

2 1 APPENDIX (cont.) Preset Display Modes STANDARD RESOLUTION HORIZONTAL FREQUENCY(KHZ) VERTICAL FREQUENCY(HZ) DOS 720x400 31.469 70 DOS 640x350 31.469 70 IBM XGA 1024x768 57.515 72 VGA 640x480 35.000 67 SVGA 832x624 49.725 75 MAC XGA 1024x768 48.780 60 640x480 31.469 60 640x480 37.861 72 VGA 640x480 37.500 75 800x600 35.156 56 800x600 37.879 60 80[...]

2 2 APPENDIX (cont.) Connector Pin Assignment 15 6 10 11 15 15 - Pin Color Display Signal Cable PIN NO. DESCRIPTION PI N NO. DESCRIPTION 1. Video-Red 9. +5V 2. Video-Green 10. Detect Cable 3. Video-Blue 11. NC 4. NC 12. DDC-Serial data 5. Ground 13. H-sync 6. GND-R 14. V-sync 7. GND-G 15. DDC-Serial clock 8. GND-B 24 - Pin Color Display Signal Cabl[...]

Q41G 2201 935 1 A 1195 NW Compton Drive Beaverton, OR 97006-1992 www.planar.com Planar Systems, Inc. Planar is a registered trademark of Planar Systems, Inc. Other brands and names are the property of their respective owners. Technical information in this document is subject to change without notice. 7 © 200[...]