Planet Technology BT-510U manual

Class 1 / Class 2 Bluetooth V2.0 USB Adapter BT-510U/BT-520U User’s Guide[...]

Copyright Copyright (C) 2006 PLANET Technolo gy Corp. All rights reserved. The products and programs described in this User’s Manual ar e licensed products of PLANET Technology, This User’s Manual contains propri etary information protected b y copyri ght, and this User’s Manual a nd all accompanying h ardware, software, and documentation are[...]

Trademarks The PLANET logo is a trademark of PLAN ET Technology. This documentation ma y refer to numerous hard ware and software products by their trade names. In most, if not all cases, these designations ar e claimed as trademarks or registered trademarks by their respective compan ies. WEEE regulation To avoid the potential effects on t he envi[...]

Table of Contents CHAPTER1 INTRODUCTION ..................................................................................................... 6 1.1 F EATURES .............................................................................................................................. 6 1.2 P ACKET C ONTENT ..........................................[...]

5.4.1 Clients and servers ........................................................................................................ 134 5.4.2 Creating a virtual COM port ......................................................................................... 135 5.4.3 Deleting a virtual COM port .....................................................[...]

1 Chapter1 Intr oduction The BT-510U/520U is designed to connect USB port of a desktop or laptop PC, and allows the computer to build a short-range wireless connection to other Bluetooth devices like cellular phones, PDAs, and computers. Since the transmission medium of BT-510U/520U is air, PLANET also enhanc es both connection protection and data [...]

1.2 Packet Content The following items should be included: • 1 * Bluetooth V2.0 USB Adapter • 1 * CD-ROM (includes Driver, Utility, Manual) • 1 * Quick Installation Guide If any of the above items are damaged or miss ing, please contact your dealer immediately. 1.3 Supported profiles Windows 98SE/ME This Bluetooth Stack for Windows supports t[...]

Japanese Norwegian Spanish Swedish The following languages are supported by Windows 2000/XP and Windows Server 2003 only. Dutch Korean Simplified Chinese Traditional Chinese Russian Finnish Portuguese (Brazil) 1.5 Supported operating systems The Bluetooth Stack for Windows suppor ts the following operating systems. Windows 98 Second Edition Windows[...]

modem; I will select from a list". Otherwise, the system may freeze during the modem detection. If the manual for your Bluetooth device does not s pecify a modem driver, then please select "St andard 33600bps modem". (f) Before connecting or disconnecting a Bl uetooth headset, please ex it any voice or sound-related applications (e.g[...]

2 Chapter 2 Setup for W indows 98SE/ME/2000/XP/2003 Installing Bluetooth software for Windows 1. Insert the Drivers and User ’s Manual CD into CD-ROM driv e to initiate the autorun program. Once completed, a menu screen will appear. 2. Install the Bluetooth software by click the “ Bluetooth Software “ hyperlink of the menu screen to activate [...]

5. When the installation is completed, please click on the " Yes " to restart your system. 11[...]

3 Chapter 3 Basic setting Methods for registering new devices using the Bluetooth Utility shall now be described. A Bluetooth mouse shall be connected and se t up using [Bluetooth Settings] as an example. [Bluetooth Settings] provides two set-up methods: "Express Mode" and "Custom Mode." • Express Mode [Bluetooth Settings] wil[...]

． The same result can be achieved by right-clicking on the Bluetooth icon in the task tray and selecting [Bluetooth Settings] from the menu that appears. The [Bluetooth Settings] window below will appear when other devices have already been registered. Please click the [New Connection] butt on to open the [Add New Connection Wizard] window. If no[...]

2. Confirm that [Express Mode] has been selected in the [Add New Connection Wizard (Welcome to the Add New C onnection Wizard)] window, and click on the [Next] button. Searching for Bluetooth devices will start. When the device has been detected, th e name and address of the device will appear in the [Add New Connection Wiza rd (Select Device)] win[...]

Note ． If no device is found, please conf irm that the dev ice has been made connectable via Bluetooth, and c lick on the [Update] button. ． A further device search will be performed. 3.1.3 Detecting services 1. Select the device name from [Device List] and cl ick on the [Next] button. Bluetooth device detection will commence. 15[...]

Note ． If several services (profiles) are suppor ted by the device, t he service that has been set to the highest priority shall be automatically selected and set up in Express Mode. Please use Custom Mode if you wish to select desired services manually. ． When a service has been detected, a window prompting you to enter the Bluetooth passkey ([...]

Note ． When the settings information has been regi stered, a window pr ompting you to enter your Bluetooth passkey (PIN code) may appear. Please enter your passkey and click on the [OK] button. ． If you have not entered your Bluetooth pa sskey after a certain amount of time has passed, the connection process will be cancelled for security reaso[...]

Note ． If you wish to change the icon, please click on the [Change Icon] button and select your preferred icon from the list that appears. 18[...]

3.1.4 Registering settings information The [Add New Connection Wizard (Completing the Add New Connection Wizard)] window will appear. 1. Click on the [Finish] button The [Bluetooth Settings] window will appear. The icons of the register ed devices will appear, and the devices will be ready to use. 19[...]

3.2 Custom Mode Set-up 3.2.1 Starting Bluetooth Settings 1. Click [Start] Æ [All Programs] Æ [Bluetooth] Æ [Bluetooth Settings]. (Under Windows 2000, click [Start] → [Programs] → [Bluetooth] → [Bluetooth Settings].) Note ． The same result can be achieved by right-clicking on the Bluetooth icon in the task tray and selecting [Bluetooth Se[...]

3.2.2 Detecting Bluetooth devices The [Add New Connection Wizard (Welcome to the Add New Connection Wizard)] window will appear. 1. Switch the device power ON to m ake it connectable via Bluetooth. 2. Confirm that [Custom Mode] has been selected in the [Add New Connection Wizard (Welcome to the Add New C onnection Wizard)] window, and click on the [...]

When the device has been detected, th e name and address of the device will appear in the [Add New Connection Wizard (Select Device)] window. Note ． If no device is found, please conf irm that the dev ice has been made connectable via Bluetooth, and c lick on the [Update] button. ． A further device sear ch will be performed. 22[...]

3.2.3 Detecting services 1. Select the device name from [Device List] and cl ick on the [Next] button. Bluetooth device detection will commence. Note ． When a service has been detected, a window prompting you to enter the Bluetooth passkey (PIN code) may appear. Please enter the passkey and click on the [OK] button.[...]

． If you have not entered your Bluetooth pa sskey after a certain amount of time has passed, the connection process will be cancelled for security reasons. Please perform the passkey entry process again. ． If you try to register a device that has already been registered, the following message will appear, and you will not be able to proceed wit[...]

[Select Services]. Example: List of another computer’s services If Express Mode is used to perform the set-up, the highes t-priority service in the device will be autom atically selected and conf igured. 3. Click on the [OK] button. Note ． When the settings information has been regi stered, a window pr ompting you to enter your Bluetooth passke[...]

4. Select the type and name of the icon to be displayed once the device has been registered, and click on the [Next] button. Note ． If you wish to change the icon, please click on the [Change Icon] button and select your preferred icon from the list that appears. 26[...]

3.2.4 Registering settings information The [Add New Connection Wizard (Completing the Add New Connection Wizard)] window will appear. 1. Click on the [Finish] button The [Bluetooth Settings] window will appear. The icons of the register ed devices will appear, and the devices will be ready to use.[...]

4 Chapter 4 Making the most of your Bluetooth de vice 4.1 Connecting to the internet 4.1.1 Connecting to the inte rnet using a modem station Setting up the modem station 1. Turn on the wi reless modem station . 2. Right-click the Bluetooth icon in the task tray, and then click on [Add New Connection] . Note ． Alternatively, click [Start] → [All[...]

The [Add New Connection Wizard (Search ing for Bluetooth devices)] window will appear. 4. Select the device name of the wireless modem stati on from [Device List], and then click on the [Next] button . 29[...]

The [Add New Connection Wizard (Searching for Services)] window will appear. Once a service has been detected successfu lly, connection to the device and COM port creation will be performed automatically, after which the [Add New Connection Wizard (Modem Settings)] window will appear. 5. If you are connecting to a wireless mode m station for the fi[...]

Once the program has finished sear ching for the devic es, the [Add New Connection Wizard (Device Se lection)] window will appear. 6. Click on the [Next] button. Certain modems require you to configur e initialization commands separately. Please click on the [Additional initializa tion Command Settings] button, enter the initialization commands in [...]

7. Enter the connection name (optional), telephone number (of your provider's access point), user name and passw ord ( as issued by your provider), and then click on the [Finish] button. Important ． The sample entries shown in the windo w are provided solely for purpose of explanation. Please use your ow n telephone number, ID and password a[...]

Connecting to the Internet 1. Start your browser, e-mail appl ication or other application Important ． Please enter the e-mail settings separatel y if you are going to use e-mail (the set-up method will vary with the application). 2. Enter the URL of the Web page you wish to display and then press the [Enter] key, or use the e-mail tool to send/r[...]

Please click on the [Disconnect] button when y ou want to disconnect from the Internet. Alternatively, please right-click on the icon, and then click on [Disconnect]. Note ． You can start an application to make an automatic connecti on to the Internet, but you can also make a manual connection using the connection destination icon. The procedure [...]

A window indicating that the connec tion is being est ablished will appear. If the connection has been established su ccessfully, the connection icon and task tray will appear as shown below. You will be able to browse Web pages using your browser and s end and receive e-mail. Important ． Please enter the e-mail settings separatel y if you are go[...]

The following message will appear. Click on the [Yes] button. When the icon appears as shown below , the connection will have ended. 36[...]

4.1.2 Connecting to the intern et using a mobile telephone Important ． In order to connect to the Interne t, you must have already signed up with a provider and obtained a connection ID and password. Please ensure you have confirmed the ID, password and telephone number of your provider's access point before you begin the set-up process. ．[...]

The [Add New Connection Wizard (Search ing for Bluetooth devices)] window will appear. 4. Select the device name of the mobile telephone from [Device List], and then click on the [Next] button . The [Add New Connection Wizard (Searching for Services)] window will appear. 38[...]

Once a service has been detected successfu lly, connection to the device and COM port creation will be performed automatically, after which the [Add New Connection Wizard (Modem Settings)] window will appear. 5. If you are connecting to a mobile te lephone for the first time, enter the passkey for the wireless modem station under [Bluetooth Passkey[...]

Certain modems require you to configur e initialization commands separately. Please click on the [Additional initializat ion Command Settings] button, enter the initialization commands in the following window, and then click on the [OK] button. 7. Enter the connection name (optional), telephone number (of your provider's access point), user na[...]

Important ． The sample entries shown in the windo w are provided solely for purpose of explanation. Please use your ow n telephone number, ID and password according to the arrangement with your provider. The settings will be registered, and an icon will appear in the [B luetooth Settings] window. Connecting to the Internet 1. Start your browser, [...]

Important ． A connection will be automatically establ ished with the modem station if COM Auto Connect is available. If COM Au to Connect is not available, please manually connect to the mobile telephone . The following message will appear once y ou have connected to the Internet. 4. End the connection The window below will appear if you double-c[...]

Please click on the [Disconnect] button when y ou want to disconnect from the Internet. Alternatively, please right-click on the icon, and then click on [Disconnect]. Note ． You can start an application to make an automatic connecti on to the Internet, but you can also make a manual connection using the connection destination icon. The procedure [...]

If the connection has been established su ccessfully, the connection icon and task tray will appear as shown below. You will be able to browse Web pages using your browser and s end and receive e-mail. Important ． Please enter the e-mail settings separatel y if you are going to use e-mail (the set-up method will vary with the application). 2. End[...]

The following message will appear. Click on the [Yes] button. When the icon appears as shown below , the connection will have ended. 45[...]

4.2 Connecting to a network[LAN] 4.2.1 Connecting to a L AN using an access point[LAP] Setting up the access point Important ． The access point must have been started and a normal connection already established to the network before the access point is set up. Please refer to the access point instruction manual for in formation on how to set up t[...]

The [Add New Connection Wizard (Search ing for Bluetooth devices)] window will appear. 4. Select the device name of the access poin t from [Device List], and then click on the [Next] button. 47[...]

You will be asked for the Bluetooth passkey in the window that appears. 5. Enter the passke y under [Bluetooth Passke y (PIN code)], and then click on the [OK] button. Service detection and COM port creati on will be performed automatically. The [Add New Connection Wizard (Creat e Connection Destination)] window will appear. 6. Enter the connection[...]

Note ． The user name and password are entered here to allow you to connect to the access point. The [Add New Connection Wizard (Confi rm Dial-up Settings)] window will appear. 7. Click on the [Confirm Settings] button. 8. Configure the connection method, and then click on the [OK] button. Set the connection destination used for the LAN connection[...]

9. Click on the [Next] button. 10. Enter the type and name of the icon di splayed after registration, and then click on the [Next] button. Please click on the [Next] button if you are satisfied with the settings. 50[...]

11. Click on the [Finish] button. The access point icon will be register ed in the [Bluetooth Settings] window. Connecting to a LAN(LAP) 1. Right-click on the connection icon in the [Bluetooth Setti ngs] window, and then click on [Connect]. 51[...]

2. Confirm that "Direct connection" has been selected under [Connection Destination], and then c lick on the [Connect] button A connection will be initiated. Note ． This is an example of what happens wh en you use "Direct connection" as a connection name under "Connect to access point." If a name different from the c[...]

2. Click on the [Connections] tab, a nd then click on the [Settings...] button. 3. Enter the IP address and port num ber of the proxy server under [Proxy Server], and then click on the [OK] button. 53[...]

4.2.2 Connecting to a L AN using an access point[PAN] Setting up the access point Important ． The access point must have been started and a normal connection already established to the network before the access point is set up. Please refer to the access point instruction manual for in formation on how to set up the access point. ． A Bluetooth [...]

The [Add New Connection Wizard (Search ing for Bluetooth devices)] window will appear. 5. Select the device name of the access point from [Device List], and then click on the [Next] button. You will be asked for the Bluetooth passkey in the window that appears. 6. Enter the passke y under [Bluetooth Passke y (PIN code)], and then click on the [OK] [...]

Service detection and COM port creati on will be performed automatically. The [Add New Connection Wizard (Connection Name Settings)] window will appear. 7. Enter the t ype and name of the icon di splayed after registration, and then click on the [Next] button. Please click on the [Next] button if you are satisfied with the settings. The [Add New Co[...]

1. Right-click on the connection icon in the [Bluetooth Setti ngs] window, and then click on [Connect]. 2. Enter the passkey under [Bluetooth Passke y (PIN code)], and then click on the [OK] button. A connection will be initiated. Note ． Please follow the procedure below if y ou need to set up a proxy server to connect to the Internet (the follow[...]

3. Enter the IP address and port num ber of the proxy server under [Proxy Server], and then click on the [OK] button. 58[...]

4.3 Sending files You can send and receive files other than business card data with a Bluetooth-enable d PC or PDA. Use "File transfer" in the Bluetooth In formation Exchanger to exchange files. Note ． The same operations will be valid as long as the PC and PDA support the FTP profile ． "File transfer" cannot be used to send[...]

Note ． If the desired device does not appear in the list, please confirm that the device has been turned on, and then select [Bluetooth] → [Search Devices]. A device search will be performed. ． You can also use "Image transfer" w hen sending individual image files. 4. Use the mouse to drag and drop the file you wish to send o ver th[...]

5. Confirm that the file is being sent. The file will be sent to the PC. Note ． When sending files using "File transfe r", a message requesting permission to receive the files may appear on the destinat ion (receiving) devic e. The content of the message will vary with the Bluetooth software inst alled on the destination device, so plea[...]

． You can use Properties in the Bluetooth Informati on Exchanger to change the location of the "Shared fo lder" on the hard drive. Receiving files from a PC or PDA Your PC is able to receive files that have been saved in the shared folder on the destination PC or PDA. Received files will be save d in the shared folder under "File t[...]

3. Double-click on the [File transfer] icon A list of devices will appear in the [File transfer] window. In this case, the file will be receiv ed from the PDA named "My Mobile". 4. Double-click on the [PDA-1] icon The file saved in the shared fold er in "My Mobile" will appear. 5. Right-click on the file you wish to r eceive, an[...]

The file will be received from a PDA. Note ． With "File transfer", you can send individu al files as well as entire folders. Please right-click on the folder you wish to receive, and select "Receive folder". Subsequent operations should be perfo rmed in the same manner as when receiving individual files. If the file has been r[...]

Note ． The received file will be saved in the "S hared folder" under "File transfer" in the Bluetooth Information Exchanger You can use Properties under the Bluetooth Information Exchanger to specify the location of the "Shared folder" on the hard drive. 4.3.2 Sending images to a mobile telephone 1. Turn on the PC or[...]

3. Double-click on the [File transfer] icon. A list of devices will appear in the [File transfer] window. 4. Drag and drop the file you wish to send over the destination icon. In this case, the image will be sent to a mobile telephone named "BT-Phone-1". 66[...]

The image will be sent. If the image has been sent successfully, the message below will appear. Please click on the [OK] button. The message below will appear if the image transmission was unsuccessful. Please click on the [OK] button to close the message, and repeat the procedure. 67[...]

4.4 Exchanging business card data with a PC or PDA You can exchange business card data with a Bluetooth-enabled PC or PDA. Business card data are exchanged using "O bject Push" under Bluetooth Information Exchanger. Selecting a business card and sending it to a PC or PDA 1. Turn on the PC or PDA. 2. Double-click on the Bluetooth Informa t[...]

Note ． If the desired device does not appear in the list, please confirm that the device has been turned on, and then select [Bluetooth] → [Search Devices]. A device search will be performed. 4. Use the mouse to drag and drop the bus iness card you wi sh to send over the destination icon In this case, the business card will be sent to a PC name[...]

If the business card has been sent succe ssfully, the message below will appear. Please click on the [OK] button. The message below will appear if the business card transmission was unsuccessful. Please click on the [OK] button to clos e the message, and repeat the procedure. Selecting your personal business card You can prepare a business card bea[...]

Note ． Alternatively, opening Explorer and c licking on the Bluetooth Information Exchanger folder will produce the same result. 3. Double-click on the [Object Push] icon. A list of devices will appear in the [Object Push] window. Note ． If the desired device does not appear in the list, please confirm that the device has been turned on, and th[...]

The business card will be sent. Note ． When you try to send a business card , a message requesting permission to receive the files may appear on the device belonging to th e other party (i.e., on the receiving end). The content of t he message will vary with the Bluetooth software installed on the destination devic e, so please be sure to follow [...]

Note ． Data that has been sent will be saved in a folder for exchanged business car ds on the destination device. Receiving a business card from another party You can prepare a business card bearing your name and other details such as your company and telephone numbers, and then send it to another party. Note ． Alternatively, opening Explorer a[...]

3. Double-click on the [Object Push] icon. A list of devices will appear in the [Object Push] window. Note ． If the desired device does not appear in the list, please confirm that the device has been turned on, and then select [Bluetooth] → [Search Devices]. A device search will be performed. 4. Right-click on the icon of the party whos e card [...]

1. Turn on the PC or PDA. 2. Double-click on the Bluetooth Informa tion Exchanger icon on the Desktop. Note ． Alternatively, opening Explorer and c licking on the Bluetooth Information Exchanger folder will produce the same result. 3. Double-click on the [Object Push] icon. A list of devices will appear in the [Object Push] window. 75[...]

Note ． If the desired device does not appear in the list, please confirm that the device has been turned on, and then select [Bluetooth] → [Search Devices]. A device search will be performed. 4. Right-click on the icon of the party wi th whom you wi sh to exchange business cards, and then click on [Object Push]. In this case, the business cards[...]

4.5 Synchronizing dat a with a PDA When you connect via Bluetooth instead of with a standard cabl e, you will always be able to synchronize your data without the ha ssle of having to connect the cable. 4.5.1 Connecting using ActiveSync Preparing the PC 1. On the PC, click on [Start] Æ [All Programs] Æ [Microsoft ActiveSy nc]. The initial ActiveSy[...]

3. Place a check next to [Allow serial cable or infrare d connection to this COM port], and then select "COM7". Note ． In the standard set-up, the port is configured to "COM7" (refer to Steps (3) and (4) under "Preparing the PDA" below). When using a different port, please also change the port number selected in this[...]

Important ． The graphic above shows an example of a PDA operating window. The connection procedure may be differ ent depending on the manufacturer or model of PDA you use. Please refer to the product instructi on manuals for further details. The [Bluetooth Settings] window will open. The message "Connection not registered" will appear i[...]

The application searches for nearby Bluetooth devices. 3. Tap and hold on the destination PC icon, and then select [Update Services]. A search for services will be carried out, and then a list of service names and their connection status will appear as li st in the lower window. 4. Tap and hold on "COM7" from the list of service names, an[...]

5. Tap [OK] in the confirmation message window . An ActiveSync connection will be initiated. Establishing a partnership between ActiveSync and a PDA Once a connection has been successfully est ablished with a PDA, the procedure for establishing a partnership with the PDA will be started by the Acti veSync application on the PC. Performing this set-[...]

1. In the [New Partnership (Set Up a Partnership)] window, select "Standard partnership", and then click on the [Next] button. The [New Partnership (Specify Data Synchronisation Method)] window will appear. 2. Select "Synchronise with this PC", and then click o n the [Next] button. The [New Partnership (Select Sync hronisation S[...]

The [New Partnership (Complet ing Setup)] wi ndow will appear. 4. Click on the [Finish] button. When you click on the [Finish] button, ActiveSync will begin to synchronize your information. [Confirming changes] 83[...]

↓ (Synchronization process) ↓ [Synchronization complete] While the ActiveSync connection is active, synchroniza tion will be performed whenever information is changed on ei ther the PC or the PDA. Once a partnership has been established, ever y time you start your PC (and PDA) thereafter, a Bluetooth connection will be opened and ActiveSync wil[...]

Cancelling a partnership Click on [File] Æ "Delete partnership". Click on the [Yes] button when the confirmation message appears. 85[...]

4.6 Fax transmission 4.6.1 Using a modem stat ion for fax transmission Important ． Please refer to the modem station instruction manual for information on how to connect the station to a telephone line. ． Please ensure that any drivers used to connect the PC to the modem have been installed. ． A Bluetooth passkey (PIN code) is required for yo[...]

The [Add New Connection Wizard (Searching for Bluetooth devices)] window will appear. Once the program has finished sear ching for the devices, the [Add New Connection Wizard (Select Device)] window will appear. 4. Select the device name of the wireless modem stati on from [Device List], and then click on the [Next] button. 87[...]

The [Add New Connection Wizard (Search ing for Services)] window will appear. 5. If you are connecting to the wireless mo dem station for the first time, enter the passkey for the device from the [B luetooth Passkey (PIN Code)] window , and then click on the [OK] button. 88[...]

Once the program has finished searchi ng for the services, the [Add New Connection Wizard (Select Service)] window will appear. 6. Select "Fax" under [Select Service], and then click on the [Next] button. The [Add New Connection Wizard (Select COM Port)] window will appear. 7. Check [Use default COM port], and then click on the [Next] but[...]

The [Add New Connection Wizard (M odem Settings)] and [Phone and Modem Options] windows will appear. 8. Click on the "Add..." button in th e [Phone and Modem Options] window. The [Add New Hardware Wizard (Ins tall New Modem)] window will appear. Install the modem by following the inst ructions in the windows that follow. Installing a mode[...]

1. Check [Don't detect my modem; I will sel ect it from a list], and then click on the [Next] button. A list of modem manufactu rers and models will appear. 2. Select the desired wireless modem fr om under [Manufacturer] and [Models], and then click on the [Next] button. Note ． If you have not yet installed a modem driver, click on t he &quo[...]

A window will appear where you can specify the port to which you can install the modem. 3. Select "Selected Port", specify the COM port to which the modem will be installed, and then click on the [Next] button. Important ． Please specify the COM port displayed in the window pertaining to Step (7) under " ● Setting up the modem st[...]

A window will appear indicating that the modem installation is complete. 5. Click on the [Finish] button. 6. Confirm that the configured modem has been added to the list in the [P hone and Modem Options] window, and th en click on the [OK] button. 93[...]

The [Next] button will be enabled on the [Add New Connection Wizard (Modem Settings)] window. 7. Click on the [Next] button on the [Add New Connection Wizard (Modem Settings)] window. The [Add New Connection Wizard (Conne ction Name Settings)] window will appear. 94[...]

8. Enter the type and name of the icon di splayed after registration, and then click on the [Next] button. Please click on the [Next] button if y ou are satisfied with the settings. The [Add New Connection Wizard (Completing the Add New Connection Wizard)] window will appear. 9. Click on the [Finish] button. The settings will be registered, and the[...]

A window showing installed program s will appear, and a Fax icon will have been created in the [Printers and Faxes] screen. 4. Click on "Send a fax" under "Printer Tasks" on the left side of the window. 96[...]

If you have not yet configured a fax dev ice, the [Fax Confi guration Wizard] window will appear. In the window you can enter settings pertaining to the sender (yourself). Note ． If the fax configuration information has already been register ed, the [Send Fax Wizard] window, which can be viewed under " Sending a fax " below, will appear[...]

Note ． If [Enable Receive] is selected, the devic e will be on standby for receiving faxes even if it is not sending or receiving anything, and th erefore will be in continuous connection to the wireless modem (when COM Auto Connect is on). Please decide whether to select this option based on the desired objective and/or frequency of transmission[...]

Setting fax information Important ． The Fax service must be enabled for sendi ng in order for you to send a fax. Please refer to " Using a wireless modem station " under "Troubleshooting" for how to change the send and receive se ttings once the service has been configured. 1. Double-click on the [Fax] icon in the Control Pane[...]

The [Send Fax Wizard (Recipie nt Information)] window will appear. 4. Enter the name and fax number of the d estination party, and then click on the [Next] button. The [Send Fax Wizard (Prepari ng the Cover Page)] window will appear. 5. Specify the cover page template, subject line, and note (bod y text), and then click on the [Next] button. The [S[...]

The [Send Fax Wizard (Completing the Send Fax Wizard)] window will appear. 7. Confirm the destination information a nd transmission details, and then click on the [Finish] button. The software will automatically dial the number and send the fax. 101[...]

Once the fax has been sent, Fax M onitor will revert to standby mode. Receiving a fax 1. When a fax arrives, the Fax Monitor will start automatically as the fax is received. Once the fax has been received, the Fax Monitor will revert to standby mode. Note ． If you have enabled manual fa x reception, the message below will appear when a fax arrive[...]

103[...]

4.6.2 Using a mobile tele phone for fax transmission Important ． Please ensure that any drivers used to connect the PC to the mobile telephone have been installed. ． Bluetooth passkey (PIN code) is requir ed for you to connect to the mobile telephone. Please make a note of your Bluetooth pa sskey before you start the set-up process. ． A fax a[...]

The [Add New Connection Wizard (Searching for Bluetooth devices)] window will appear. Once the program has finished sear ching for the devices, the [Add New Connection Wizard (Select Device)] window will appear. 4. Select the device name of the mobile telephone from [Device List], and then click on the [Next] button. The [Add New Connection Wizard [...]

5. If you are connecting to the mobile telephone for the first time, enter the passkey for the device from the [Bluet ooth Passkey (PIN Code)] window, and then click on the [OK] button. Once the program has finished searchi ng for the services, the [Add New Connection Wizard (Select Service)] window will appear. 6. Select "Fax" under [Sel[...]

The [Add New Connection Wizard (Select COM Port)] window will appear. 7. Check [Use default COM port], and then click on the [Next] button. Note ． The mobile telephone will be installed to the grayed-out COM port displayed under [Assignment of COM Port] in this window. You will be specifying this COM port in Step (3) of " ● Installing a Mo[...]

8. Click on the "Add..." button in th e [Phone and Modem Options] window. The [Add New Hardware Wizard (Ins tall New Modem)] window will appear. Install the modem by following the inst ructions in the windows that follow. Installing a modem The [Add New Hardware Wizard (Ins tall New Modem)] window will appear. 1. Check [Don't detect [...]

A list of modem manufactu rers and models will appear. 2. Select the desired mobile telephone fr om under [Manufacturer] and [Models], and then click on the [Next] button. Note ． If you have not yet installed a mobile telephone driver, click on the "Use Device" button to install one from this window. ． If no mobile telephone drivers a[...]

3. Select "Selected Port", specify the COM port to which the modem will be installed, and then click on the [Next] button. Important ． Please specify the COM port displayed in the window pertaining to Step (7) under " ● Setting up the modem station." 4. Click on the [Continue] button. The wizard will display the following wi[...]

6. Confirm that the configured modem has been added to the list in the [P hone and Modem Options] window, and th en click on the [OK] button. The [Next] button will be enabled on the [Add New Connection Wizard (Modem Settings)] window. 7. Click on the [Next] button on the [Add New Connection Wizard (Modem Settings)] window. 111[...]

The [Add New Connection Wizard (Conne ction Name Settings)] window will appear. 8. Enter the type and name of the icon di splayed after registration, and then click on the [Next] button. Please click on the [Next] button if y ou are satisfied with the settings. The [Add New Connection Wizard (Completing the Add New Connection Wizard)] window will a[...]

Setting fax information Configure send/receive settings and register fax information. 1. Select [Start] Æ [Control Panel], and then double-click on the [Printers and Other Hardware] icon . Note ． If the control panel is displayed in "Classic view", and you use Windows 2000, please start from Step (2). 2. Double-click on the [Printers a[...]

4. Click on "Send a fax" under "Printer Tasks" on the left side of the window. If you have not yet configured a fax dev ice, the [Fax Confi guration Wizard] window will appear. In the window you can enter settings pertaining to the sender (yourself). Note ． If the fax configuration information has already been register ed, the[...]

Note ． The sender information that you confi gure here will be automatically appended as header information when you send a fax. 6. Select a device to be used for fax transmissions, enable the device for sending or receiving, and then click on the [Next] button Note ． If [Enable Receive] is selected, the devic e will be on standby for receiving[...]

7. Click on the [Next] button. It is important that you do not change the transmitter subscriber identification. 8. Click on the [Finish] button. Please refer to the same procedure of “Sending a fax” and “receiving a fax” in the “using a modem station for transmission” section. 4.7 Using a Bluetooth-compatib le camera Connecting the cam[...]

． In Windows 2000, click on [Start] → [Programs] → [Bluetooth] → [Remote Camera]. The [Remote Camera] window will appear. 2. Turn on the camera, and set it to be connectable via Bluetooth. Note ． Different cameras are operated in different ways, depending on the manufacturer and model used. Please refer to the instruction manual for furth[...]

4. Right-click on the camera icon, and select [Connect]. The camera will be connected, and images from the camera will appear on-screen. Taking a signal picture By placing the mouse cursor over the on- screen image, the camera's operating window will appear. You can operate the came ra from this window. 118[...]

1. Click on the button in the operating window. A single image will be captured and sent to the PC. Taking several consecutive frames 1. Click on the button in the operating window . A succession of images will be c aptured and sent to the PC. 119[...]

Note ． The remote camera shutter cannot be operated while the camera is connected to the PC. ． The number of consecutive pictures taken can be set to anywhere between 2 and 16. 1. In the [Remote Camera] window, click on [Bluetooth] → [Properties] Æ [Consecutive Image Settings]. 2. Click on the [<][>] buttons to select the number of con[...]

Note ． This window is an example showing pi ctures when [Filmstrip] has been selected from the [View] menu in Explorer. 121[...]

4.8 Using a headset to communicate Registering the headset 1. Right-click on the Bluetooth icon in th e tasktray, then click on [Add New Connection Wizard]. Note ． Alternatively, you can click on [Start ]>[All Programs]>[Bl uetooth]>[Bluetooth Settings], then click on [New Connection] in the [Bluetooth Setti ngs] screen that has opened. [...]

The [Add New Connection Wizard (Search ing for Bluetooth Devices)] screen will appear. Once the device search has been comp leted, the [Add New Connection Wizard (Select a Device)] screen will appear. 4. Select the name of the headset device from the list, then click on the [Next] button . 123[...]

5. Answering w ith the headset. If the service has been properly detected, a screen will appear indicating that the headset is being called, and a tone wil l accordingly sound in the headset. Please press the headset switch. Important ． The procedure for operating the headset may differ depending on the manufacturer and model. Please consult your[...]

If another audio device has already been r egistered (i.e., the driver has been installed), you can proceed to Step 9 without having to install the driver. 6. Click on the [Next] button. The [Install Hardware] screen will appear. 7. Click on the [Continue Anyway] button. The following screen will appear automatically. You may disregard it and click[...]

Once driver installation is complete, the [Add New Connection Wizard (Enter Connection Name)] will appear. 9. Confirm the information you have entere d, and click on the [Next] button. The [Add New Connection Wizard (Completing the Add New Connection Wizard)] screen will appear. 10. Click on the [Finish] button. The configuration information will b[...]

Making a connecting to the headset You can make a connection to the headset fr om an icon that has been registered in [Bluetooth Settings]. Important ． Before making a connection to the headset, please check that you have turned on the headset's power, and it has been enabled for a Bluetooth connection. Please ensure that the following audio[...]

If the connection has been properly established, the icon's appearance will change to indicate a connected state. You may now launch conferencing and voice-recognition software and use the headset. Disconnecting from the headset Please follow the steps below to disconnect from the headset. 1. Right-click on the headset icon in the [B luetooth [...]

4 5 Chapter 5 Advanced fea tur es 5.1 Making a device undisco verable to other users 1. Right-click on the Bluetooth icon in the task tray, and then click on [Device Properties and Security…]. The [Device Properties and Security] window will appear. 2. Select [Non-discoverable mode] in [Discoverability mode] under the [Mode] tab, and then click o[...]

Note ． Other devices are still able to establis h connections with your device eve n if you have enabled the Non-discoverable mode. Please enable "Non-connectable mode" if you wish to reject connections from other devices. 5.2 Encrypting the content o f your transmissions Since Bluetooth communication is conduc ted wirelessly, there is [...]

Note ． Once you have configured the securi ty mode, a window will appear when you first make a connection to another device, prompting you to enter a Bluetooth passkey (PIN code). Please click on the [OK] button af ter you have entered the passkey. ． The window in which you enter the passkey will not appear once you have connected more than two[...]

The [Internet Op tions] window will appear. 3. Click on the [Connections] tab. In this window, "Direct Connection" is set as the default, and "Never dial a connection" has been selected. Change the settings so that "London A" will always be dialed when you connect to the Internet. 4. Select "Always dial my default[...]

5. Click on "London A", and then cli ck on the [Set Default] button. "London A" has been changed to the default connection. 133[...]

5.4 Manually creating a vi rtual Bluetooth COM port In order for a PC to c onnect to and communicate with a Bluetooth device, the Bluetooth Utility will create a gateway for data to be exchanged between the respective devices. This gateway is know n as a "port" (or "virtual COM port"). Since one virtual COM port will be allo cat[...]

• Bluetooth virtual COM port for a server Virtual COM port used when your devic e is the server, and requests are received from another device. 5.4.2 Creating a virtual COM port 1. Click on the [Printers and Other Ha rdware] icon in the Control Panel. The [Printers and Other Hardware] window appears. 2. Double-click on the [Bluetooth Local COM] i[...]

Note ． Even when the Control Panel appears in Classic view, please s imply click on the [Bluetooth Local COM] icon. o No such distinction between viewing formats exists in Windows 2000. 3. Click on the [Add...] button. The [Bluetooth Local COM Wizard] window, from where you can create a virtual COM port, will appear. 136[...]

Start from this window when creating Bluetooth virtual COM ports for either servers or clients. 5.4.3 Deleting a virtual COM port Note ． You can only delete virtual COM ports created by the Bl uetooth Local COM utility. 1. Select the port you wish to dele te from the [Bluetooth Local COM] window, and then click on the [Delete] button. A message w[...]

The port will be deleted. 3. Click on the [OK] button. 138[...]

6 Chapter 6 F A Q 6.1 General operation of the Bluetooth Utility Bluetooth Manager Q: Bluetooth icon does not appear in task tray. • If the Bluetooth icon does not appear in the task tray , Bluetooth Manager will not be active, which will prevent you from being able to use any of the functions of the Bluetooth Utility. Start the utilities as inst[...]

Please confirm whether the wirele ss comm unication switch has been turned o n . Bluetooth Settings Q: Clicking on the [New Connection] button brings up the message "Unable to prepare Bluetooth." • The wireless communication switch is turned off. Please switch it on. Q: Remote device(s) cannot be detected • The other device(s) may hav[...]

• The other device may have a certain security level enforced (Non-connectable mode etc). Please confirm the security settings of the other device. Please enter the correct password if you are asked to enter one. Remote Camera • See " Using a camera " Bluetooth Local COM Q: Cannot add port • A maximum of 64 virtual COM ports can be [...]

• Please ensure that the two slide switc hes on the underside of the main unit have been set to the "NORMAL" and "M ODEM" positions respectively. Q: Cannot connect to the Internet • The telephone number of the connecti on (i.e., the telephone number for the access point of your Internet servic e provider) may not be correct.[...]

The [Fax properties] window will appear. 2. Select the [Device] tab, right-cli ck on the modem you wish to use, and then click on [Properties]. 3. Select the [Send] tab, and then confirm that "Enable device to send" has been checked. 143[...]

4. Select the [Receive] tab, and then confirm that "Enable device to receive" has been checked (when you wish to receive faxes). 5. Click on the [OK] button. 6.3 Using an access point Q: Access point cannot be detected. 144[...]

• If the access point is connected to and is being used by another device, the access point will be undetectable even if you search for it. Q: Cannot connect to access point. • If the access point is connected to and is being used by another device, no other device will be able to connect to the access point. Q: Cannot connect to LAN. • The L[...]

If BIP is supported: use "Image tr ansfer" under Bluetooth Information Exchanger to send images Q: Cannot connect to the Internet. • The telephone number of the connecti on (i.e., the telephone number for the access point of your Internet servic e provider) may not be correct. Please check the telephone number. • The user ID and/or pa[...]

2. Select the [Device] tab, right-cli ck on the modem you wish to use, and then click on [Properties] . 3. Select the [Send] tab, and then confirm that "Enable device to send" has been checked. 4. Select the [Receive] tab, and then confirm that "Enable device to receive" has been checked when you wish to receive faxes). 147[...]

5. Click on the [OK] button. 6.5 Using a PDA Q: Cannot make an ActiveSync connection. • Please confirm that you have installed Ac tiveSync v3.7 or higher on your PC. • ActiveSync is installed to COM7 as a default. Please refer to "Synchronizing data with a PDA" and re-configure your ActiveSync connection. If a port other than COM7 has[...]

• If the camera is connected to and is being used by another device, the camera will be undetectable even if you search for it. Q: Cannot connect to camera. • If the camera is connected to and is being used by another device, no other device will be able to connect to the camera. Q: Images from the camera can be displa yed, but no pictures can [...]

• Please confirm that the Bluetooth Heads et is being operated correctly (for example, ensure that the correct m ode (audio or communica tions) mode has been selected). • Please confirm that the vo ice file or CD is being played back normally on your PC. • Please check the volume settings on your Bluetooth Headset and PC. • If Windows Media[...]

A ppendix A Specifica tion Model BT-510U BT-520U Bluetooth Spec. Compliance Bluetooth V2.0+EDR Transfer rates (Max) Max UART baud rates of 3Mbps Operating Voltage +5V USB Standard USB 2.0 Operating Distance 100 m in free space 10 m in free space Antenna 2dBi Antenna 0 dBi printing Antenna Dimension 49.36 (L) x 17.99(W) x 7.55(H) mm Power Consumptio[...]