Planet WNRT-617 manual

User ’ s Manual www.PLANET.com.tw 150Mbps 802.1 1n Wireless Broadband Router WNR T -617[...]

Copyright Copyright  2013 by PLANET T echnolog y Corp. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the[...]

Federal Communication Commission (FCC) Radiation Exposure Statement This equipment complies with FCC radiation exposure se t forth for an uncontrol led environment. In order to avoid the possibilit y of exceeding the FCC radio fr equency exposure limits, human proximity to the antenn a shall not be less than 20 cm (8 inches) duri ng normal operatio[...]

Revision User’s Manual for PLANET 802.11n Wireless Broadband Router Model: WNRT-617 Rev: 2.0 (MAY. 2013) Part No: EM-WNRT -617v2_v2.0 (2081-E50200-002) IV[...]

CONTENTS Chapter 1. Product Intr oduction ......................................................................................................... 12 1.1 Package Co ntents ............................................................................................................... 12 1.2 Product De scription .....................................[...]

5.7.5 Wireless St atis tics ................................................................................................... 73 5.8 DHCP ........................................................................................................................... ....... 74 5.8.1 DHCP Se ttings ......................................................[...]

5.18.1 Time Se ttings ........................................................................................................ 123 5.18.2 Diagnost ic ............................................................................................................. 125 5.18.3 Firmware Up grade .............................................................[...]

FIGURE F IGURE 2-1 WNR T -617 F RONT P ANEL ................................................................................................... 17 F IGURE 2-2 WNR T -617 F RONT P ANEL ................................................................................................... 18 F IGURE 3-1 A DJUST THE DIRECTION OF THE ANTENNA ..............[...]

F IGURE 5-13 PPP O E A DV A NCED S ETTINGS ........................................................................................... 51 F IGURE 5-14 WA N – B IG P OND C ABLE ................................................................................................... 52 F IGURE 5-15 WA N - L2T P S ETTINGS .................................[...]

F IGURE 5-53 A CCESS C ONTROL R ULE M ANAGEMENT ............................................................................. 97 F IGURE 5-54 A DD OR M ODIF Y I NTERNET A CCESS C ONTROL E NTR Y ......................................................... 99 F IGURE 5-55 A CCESS C ONTROL R ULE LIST ......................................................[...]

XI F IGURE 5-93 R EBOOT THE R OUTER ..................................................................................................... 129 F IGURE 5-94 P ASSWORD ..................................................................................................................... 130 F IGURE 5-95 S YST EM L OG ....................................[...]

User ’s Man ual of WNRT -617 -12- Chapter 1. Product Introduction 1.1 Package Content s The following items should be containe d in the package: WNRT -617 Wireless Broadband Rout er Power Adapter Ethernet Cable Quick Installa tion Guide CD-ROM (User ’s Manual inclu ded) If there is any item missing or damage d, please contact the seller immedia[...]

User ’s Man ual of WNRT -617 -13- Wide Range of Wireless Security Support The WNRT -617 supports one W AN port for wired cabl e or DSL service connection. T o secure the wireless communication, the WNRT -617 support s up-to-date encryption, WP A-PSK/WP A2-PSK with TKIP/AES. In order to simplify the sec urity setti ngs, the WNRT -617 supports Wi-F[...]

User ’s Man ual of WNRT -617 -14-  Secure Network Connection  Supports Wi-Fi Protected Setup (WPS)  Advanced security: 64/128/152-bit WEP , WP A/WP A2 and WP A-PSK/WP A2-PSK(TKIP/AES encryption), 802.1x  Supports NA T firewall features, with SPI function to protect again st DoS attacks.  Supports IP / Protocol-based ac cess control[...]

User ’s Man ual of WNRT -617 -15- T ransmission Distance Indoor up to 100m Outdoor up to 300m (it is limited to the environme nt) Channel America/ FCC: 2.414~2. 462GHz (11 Ch annels) Europe/ ETSI: 2.412~2.472GHz (13 Ch annels) Japan/ TELEC: 2.412~2.484G Hz (14 Channels) RF Power High: 18 dBm (max) Middle: 15 dBm Low: 12 dBm Rece ive S ensit ivi t[...]

User ’s Man ual of WNRT -617 -16- Routing Protocol S tatic Routing VPN Pass-through PPTP , L2TP , IPSec Built-in DHCP server supporting static IP address distributing Supports UPnP , Dynamic DNS Supports Flow S tatistics IP & MAC Binding IP / Protocol-based Bandwidth Control LA N Session Number: Max 5210 Web-based (HTTP) management interface [...]

User ’s Man ual of WNRT -617 -17- Chapter 2. Hardware Installation Please follow the instruction s below to build the wireless net work connection between W NRT -617 and your computers. 2.1 Hardware Description 2.1.1 The Front Panel The front pan el provides a simple interfa ce monitoring the router . Figure 2-1 shows the front p anel of WNRT -61[...]

User ’s Man ual of WNRT -617 -18- LED Definition Figure 2-2 WNR T -617 Front Panel LED Stat u s Function On Power is on. PWR Off Power is off. On The Router is initializing. Flashing The Router is working p roperly . SYS Off The Router has a sy stem error . Flashing The Wireless function is en abled. WLAN Off The Wireless function i s disabled. O[...]

User ’s Man ual of WNRT -617 -19- 2.1.3 The Rear Panel Figure 2-3 Rear Panel Interface Function POWER pter . ter provided with WNR T -617. The power socket is where you will connect the power ada Please use the power adap ON/OFF The button of the power . WA N Connect to the DSL/cable Modem, or Et hernet 1,2,3,4 (LAN) Connect to the user ’s PC o[...]

User ’s Man ual of WNRT -617 -20- Chapter 3. Connecting the Router 3.1 System Requirement s Broadband Internet Access Service (DSL/Cable/Ethernet connection) One DSL/Cable Modem t hat has an RJ-45 conne ctor (not necessary if the Route r is connected directly to the Ethernet.) PCs with a working Ethernet Adapter and an Ethernet cable with RJ-45 c[...]

User ’s Man ual of WNRT -617 -21- Figure 3-1 Adjust the direction of the antenna Step 4. Connect the PC or Switch/Hub in your LAN to t he LAN Ports (Y ellow port s ) of the Router with Ethernet cable as shown in Figure 3-2 . Figure 3-2 Hardware Installation of the WNR T -617 Wireless Rout er Step 5. Connect the power adapter to the power so cket [...]

User ’s Man ual of WNRT -617 -22- Chapter 4. Quick Installation Guide This chapter will show you how to con figure the ba sic functions of your wirel ess broadband router using Quick Setup within minutes. A computer with wired Ethernet connection to the Wirel ess Router is required for the first-time configuration. 4.1 Manual Network Setup - TCP/[...]

User ’s Man ual of WNRT -617 -23- Figure 4-1 Change adapter settings 3) Right-click on the Wireless Network Connection, and select Properties in the appea ring window . Figure 4-2 Network Connection Properties[...]

User ’s Man ual of WNRT -617 -24- 4) In the prompt window shown bel ow , double click on the Internet Protocol V ersion 4 (TCP/IPv4) . Figure 4-3 TCP/IP Setting 5) Choose Obt ain an IP address automatically , and Obt ain DNS server address automatically as shown in the figure below . Then click OK to save your settings.[...]

User ’s Man ual of WNRT -617 -25- Figure 4-4 Obtain an IP address automatically 4.1.2 Configure the IP Address Manually Summary:  Set up the TCP/IP Protocol for your PC.  Configure the network pa rame ters. The IP address is 192.16 8.1.xxx ("xxx" is any number from 2 to 254), Subnet Mask is 255.255.255. 0, and Gateway is 192.168.1[...]

User ’s Man ual of WNRT -617 -26- you can enter the DNS server IP address provided by your local ISP . Then click OK to save your settings. Figure 4-5 Use S tatic IP address Now , you can run the Ping command in the command prompt to verify the network conne ction between your PC and the Router . The following example is i n Windows 7 OS. Please [...]

User ’s Man ual of WNRT -617 -27- Figure 4-6 Windows 7 - Search box 3. Open a command prompt , and type ping 192.168.1.1 , and then press Enter .  If the result displayed is similar to Figure 4-7 , it means the connection betwee n your PC and the Route r has been est ablished well. Figure 4-7 S uccessful re sult of Ping command  If the resu[...]

User ’s Man ual of WNRT -617 -28- Figure 4-8 Failed result of Ping comm and If the address is 0.0.0.0, check y our adapter inst allation, secu rity settings, and the settings on your router . Some firewall sof tware programs may block a DHCP re quest on newly inst alled adapters. 1. The 1/2/3/4 LEDs of LAN port s which y ou link to on the Router [...]

User ’s Man ual of WNRT -617 -29- 4.2 S t arting Setup in W eb UI It is easy to configure and manage the WNR T -617 with web browser . Step 1. T o access the configuration utility , open a web-browser and enter the default IP address http://192.168.1.1 in the address field of the browser . Figure 4-9 Login the Router After a mome nt, a login wind[...]

User ’s Man ual of WNRT -617 -30- After entering the username and p assword, the main screen appears as Figure 4-1 1 . Figure 4-1 1 WNRT -617 Web UI Screenshot Step 2. After successfully login in, you can click the Quick Setup to quickly configure your Router . Figure 4-12 Quick Setup Click Next , and then W AN Connection T ype page will appear ,[...]

User ’s Man ual of WNRT -617 -31- Figure 4-13 Quick Setup – W AN Connection T ype If the connection type detected is PPPoE , the next scre en will appear as sh own in Figure 4-14 . Enter the User Name and Pass w ord provided by your ISP. These fields are case-sen sitive. If you have difficulty with this proc ess, please contact your ISP. Figure[...]

User ’s Man ual of WNRT -617 -32- Figure 4-15 Quick Setup - S tatic IP If the connection type detected is Dy namic I P , the n ext screen will appear as shown in Figure 4-16 . Then you ca n go on with the wireless configurat ion. Figure 4-16 Quick Setup – MAC Clone Step 4. Click Next to continue, the Wirel ess settings page will appe ar as show[...]

User ’s Man ual of WNRT -617 -33- Figure 4-17 Quick Setup – Wireless[...]

User ’s Man ual of WNRT -617 -34- The page incl udes the following fields: Object Description Wireless Radio Enable or disable the wireless radio cho osing from the pull-down list. Wireless Network Name (SSID) Enter a value of up to 32 characters. The same na me of SSID (Service Set Identification) must be as signed to all wireless de vices in yo[...]

User ’s Man ual of WNRT -617 -35- Chapter These settings are only for basic wirel ess parameters. For advanced setting s, please refer to 5.7 Wireless . Step 5. Click the Next button. Y ou will then see the Finish page. If you don’t make any change on the Wireless p age, you will see the Finish page as shown in Figure 4-18 . Click the Finish bu[...]

User ’s Man ual of WNRT -617 -36- 4.3 PLANET Smart Setup! Utility Y ou can configure the Wireless Router by running the SMART SETUP! in the CD-ROM provid ed in the package. T o setup through the Smart Setup! program, insert the CD into your Windows XP / V ista / Win 7 PC and follow the instructions on the scree n. Step 1. Power on the Cable/DSL M[...]

User ’s Man ual of WNRT -617 -37- Figure 4-22 PLANET Smart Setup! Program screenshot[...]

User ’s Man ual of WNRT -617 -38- Chapter 5. Configuring the Router This chapter will show e ach Web p age's key functions and the configuration way . 5.1 Login After successfully login, you will see the fif teen main menus on the left of the W eb-based utility . On the right, there are the corresp onding explanations and instru ctions. Figu[...]

User ’s Man ual of WNRT -617 -39- Figure 5-2 Router S tatus 5.3 Quick Setup Please refer to Section 4.2: S t arting Setup in Web UI .[...]

User ’s Man ual of WNRT -617 -40- 5.4 Operation Mode Figure 5-3 Operation Mode The page incl udes the following fields: Object Description Client Router In this mode, the device enables multiusers to share Internet from WISP . The LAN port devices share the same IP from WISP through Wireless port. While conn ecting to WISP , the Wireless port wor[...]

User ’s Man ual of WNRT -617 -41- Bridge with AP In this mode, the device can be used to combine multiple local networks together to the same one via wireless conn ections, especially for a home or of fice where sep arated networks can't be connected easily together with a cable. Client In this mode, the device can be con nected to another d[...]

User ’s Man ual of WNRT -617 -42- 5.5 WPS This section will guide you to add a new wirele ss device quickly to an existing network by WPS (Wi-Fi Protected Setup) function. Step 1. Choose menu “ WPS ”, you will see the next screen (shown in Figure 5-4 ). Figure 5-4 WPS The p age include s the following fields: Object Description WPS St atus En[...]

User ’s Man ual of WNRT -617 -43- To build a successful connection by WPS, you should al so do the corresponding configuration of the new device for WPS function. I. B y Push Button Configuration (P BC) If the wireless adapter support s Wi-Fi Protecte d Setup and the Push Button Configuration (PBC) method, you can add it to the network by PBC wit[...]

User ’s Man ual of WNRT -617 -44- Step 2: Press and hold the WPS Button equipped on the adapte r directly for 2 or 3 secon ds. Or you can click the WPS button with the same function in t he configuration utility of the adapter . Step 3: W ait for a while until t he next screen appea rs. Click Finish to complete the WPS configuration. II. By PIN I[...]

User ’s Man ual of WNRT -617 -45- Method T w o: Enter the PIN of the Router into the configuration utility of your Wirele ss adapter Step 1: Get the Current PIN code of the Router i n Figure 5-4 (each Route r has it s unique PIN code). Step 2: For the configuration of the wireless adapter , please choose the option that you want to enter the PIN [...]

User ’s Man ual of WNRT -617 -46- 5.6 Network There are three submenus under the Network menu (shown in Figure 5-9 ): WA N , LAN , and MAC Clone . Click any of them, and you will be able to configure the corresp onding function. Figure 5-9 The Network menu 5.6.1 WAN Choose menu “ Network → WA N ”, you can configure the IP para meters of the[...]

User ’s Man ual of WNRT -617 -47- Figure 5-10 W AN - Dynamic IP This page displays the W AN IP p arameters assigne d dynamically by your ISP , including IP ad dress, Subnet Mask, Default Gateway , etc. Click the Renew button to renew the IP parameters from y our ISP . Click the Release button to release the IP p arameters. Object Description MTU [...]

User ’s Man ual of WNRT -617 -48- If you get “Address not found” error wh en you ac cess a W ebsite, it is likely that your DNS servers are set u p improperly . Y ou should cont act your ISP to get the correct DNS server address.  St atic IP 2. If your ISP provides a static or fixed IP Address, Subnet Mask, Gateway and DNS setting, select [...]

User ’s Man ual of WNRT -617 -49- default MTU Size unless required by your ISP . Primary/Secondary DNS (Optional) Enter one or two DNS addresses in dotted-decim al notation provided by your ISP .  PPPoE / Russia PPPoE 3. If your ISP provides a PPPoE / Russia PPPoE connection, select PPPoE/Russia PPPoE option. And enter the following parameters[...]

User ’s Man ual of WNRT -617 -50- The page incl udes the following fields: Object Description User Name/Pass word Enter the User Name and Password provided by your ISP . These fields are case-sensitive. Disabled The Secondary Conne ction is disabl ed by default, so there is PPPoE connection only. This is recommended. Dy nam ic I P Y ou can check [...]

User ’s Man ual of WNRT -617 -51- Figure 5-13 PPPoE Advanced Settings The page incl udes the following fields: Object Description MTU Size The default MTU size is “1480” bytes, whi ch is usually fine. It is not recommended that you change th e default MTU Size unless requ ired by your ISP . Service Name/AC Name The service name and AC (Acce s[...]

User ’s Man ual of WNRT -617 -52-  BigPond Cable 4. If your ISP provides BigPond Cable (or Heart Beat Signal) connection, plea se select BigPond Cable . And you should enter the following parameter s ( Figure 5-14 ): Figure 5-14 W AN – BigPond Cable The page incl udes the following fields: Object Description User Name/Pass word Enter the Use[...]

User ’s Man ual of WNRT -617 -53- change the default MTU Size unless req uired by your ISP . Connect on Demand In this mode, the Internet connect ion can be termin ated automatically after a specified inactivity period ( Max Idle T ime ) and be re-establi shed when you attempt to access the Internet again. If you want your Internet connection to [...]

User ’s Man ual of WNRT -617 -54-  L2TP / Russia L2TP 5. If your ISP provides L2TP / Russia L2T P connection, please select L2TP/Russia L2TP option. And enter the following parameters ( Figure 5-15 ): Figure 5-15 W AN - L2TP Settings The page incl udes the following fields: Object Description User Name/Pass word Enter the User Name and Passwor[...]

User ’s Man ual of WNRT -617 -55- wish to activate Connect on Demand , click the radio button. If you want your Internet connection to rema in active at all times, enter 0 in the Max Idle Time field. Otherwi se, enter the number of minutes you want to have elapse d before your Internet connection terminates. Connect Automatically Connect automati[...]

User ’s Man ual of WNRT -617 -56-  PPTP / Russia PPTP 6. If your ISP provid es PPTP / Russia PPTP connection, please select PPTP/Russia PPTP option. And enter the following parameters ( Figure 5-16 ): Figure 5-16 W AN - PPTP Settings The page incl udes the following fields: Object Description User Name/Pass word Enter the User Name and Passwor[...]

User ’s Man ual of WNRT -617 -57- Internet connection ha s been terminated due to inacti vity , Connect on Demand enables the Router to automatically re-est ablish your connection as soon as you attempt to access the Internet again. If you wish to activate Connect on Demand , click the radio button. If you want your Internet connection to remain [...]

User ’s Man ual of WNRT -617 -58- Figure 5-17 LAN Settings The page incl udes the following fields: Object Description MAC Address The physical address of the Ro uter , as seen from the LAN. The value can't be changed. IP Addres s Enter the IP address of your Router or reset it in dotted-deci mal notation (factory default: 192.168.1.1). Subn[...]

User ’s Man ual of WNRT -617 -59- 5.6.3 MAC Clone Choose m enu “ Network → MAC Clo ne ”, you can configure the MAC add ress of the W AN on the screen b elow ( Figure 5-18 ). Figure 5-18 MAC Addre ss Clone Some ISPs require that you register the MAC Addr ess of your adapter . Changes are rarely needed here. The page incl udes the following f[...]

User ’s Man ual of WNRT -617 -60- 5.7 Wireless There are five submenus under the Wireless menu (shown in Figure 5-19 ): Wireless Settings , Wireless Security , Wireless MAC Filtering, Wireless Advanced and Wireless St atistics. Click any of them, and you will be able to configure the corresp onding function. Figure 5-19 Wireless menu 5.7.1 Wirele[...]

User ’s Man ual of WNRT -617 -61- The page incl udes the following fields: Object Description Wireless Network Name (SSID) Enter a value of up to 32 characters. The same na me of SSID (Service Set Identification) must be assigned t o all wireless devices in your network. Considering your wireless network security , the default SSID is set to be d[...]

User ’s Man ual of WNRT -617 -62- Max Tx Rate Y ou can limit the maximum tx rate of the Router through this field. Enable Wireless Router Radio The wireless radio of this Router can be enabled or disabled to allow wireless st ations access. Enable SSID Broadcast When wireless clients survey the local area for wireless networks to associate with, [...]

User ’s Man ual of WNRT -617 -63- BSSID(to be bridged) The BSSID of the AP your Router is going to connect to as a clie nt. You can also use the search func tion to select the BSSID to join. Search Click this button, you can search the AP whi ch runs in the current channel. Key ty pe This option should be chosen accordin g to the AP's securi[...]

User ’s Man ual of WNRT -617 -64- Figure 5-22 Wireless Security - None The page incl udes the following fields: Object Description Disable Security If you do not want to use wirel ess secu rity, select this check box, but it’s strongly recommended to choose one of the following mod es to enable security. Figure 5-23 Wireless Security - WEP[...]

User ’s Man ual of WNRT -617 -65- Object Description WEP It is based on the IEEE 802.11 standard. If you select this check box, you will find a notice in red as show in Figure 5-23 . Typ e you can choose the type for the WEP security on the pull-down list. The default setting is Automatic , which can sele ct Open System or Shared Key authenticati[...]

User ’s Man ual of WNRT -617 -66- Figure 5-24 Wirele ss Security - WP A/WP A2 Enterprise The page incl udes the following fields: Object Description WPA/WPA2 It is based on Radius Server. Ve r s i o n you can choose the version of the WPA security on the pull-down list. The default setting is Automatic , which can sele ct WP A ( Wi-Fi Protected A[...]

User ’s Man ual of WNRT -617 -67- Figure 5-25 Wirele ss Security - WP A/WP A2 Personal The page incl udes the following fields: Object Description WP A-PSK/WP A2-PSK It’s the WPA/WPA2 authenticati on type based on pre-sh ared passphrase. Ve r s i o n you can choose the version of the WPA-PSK security on the drop-down list. The default setting i[...]

User ’s Man ual of WNRT -617 -68- 5.7.3 Wireless MAC Filtering Choose menu “ Wireless → MAC Filtering ”, you can control the wireless access by configuring the Wireless MAC Address Filtering function, shown in Figure 5-26 . Figure 5-26 Wirele ss MAC Address Filtering T o filter wireless use rs by MAC Address, click Enable . The default sett[...]

User ’s Man ual of WNRT -617 -69- Figure 5-27 Add or Modi fy Wireless MAC Address Filtering entry T o add or modify a MAC Address Filter ing entry , follow these instructions: Step 1. Ente r the appro priate MAC Addr ess into the MAC Address field. The form at of the MAC Address is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). For example: 00-3[...]

User ’s Man ual of WNRT -617 -70- For example: If you desire that the wireless station A with MAC address 0 0-30-4F-11-22-3 3 and the wireless station B with MAC address 00-30-4F-1A-2B- 3C are able to access the Router, but all the other wireless stations cannot a ccess the Router, you can configure the Wireless MAC Addre ss Filtering list by fol[...]

User ’s Man ual of WNRT -617 -71- 5.7.4 Wireless Advanced Choose menu “ Wireless → Wireless Advanced ”, and you can configure the advanced settings of you r wireless network. Figure 5-29 Wireless Advanced The page incl udes the following fields: Object Description T ransmit Power Here you can specify the transmit power of Route r . Y ou can[...]

User ’s Man ual of WNRT -617 -72- setting and is recommended. DTIM Interval This value determines the interval of the Delivery T raffic Indication Message (DTIM). A DTIM field is a countdown field inf orming client s of the next window for listening to bro adcast and multicast message s. When the Router has buf fered broadcast or multicast messag[...]

User ’s Man ual of WNRT -617 -73- 5.7.5 Wireless Statistics Choose menu “ Wireless → Wireless S t atistics ”, and you can see the MAC Address, Current S tatus, Received Packets a nd Sent Packets for each connected wireless st ation. Figure 5-30 The Router attached wireless st ations The page incl udes the following fields: Object Descriptio[...]

User ’s Man ual of WNRT -617 -74- 5.8 DHCP There are three submenus under the DHCP menu (shown in Figure 5-31 ): DHCP Settings , DHCP Client s List and Address Reservation. Click any of them, and you will be able to configure the corresponding function. Figure 5-31 The DHCP menu 5.8.1 DHCP Settings Choose menu “ DHCP → DHCP Se ttings ”, and[...]

User ’s Man ual of WNRT -617 -75- The page incl udes the following fields: Object Description DHCP Server Enable or Disable the DHCP server . If you disable the Server , you must have another DHCP server within y our network or else you must configure the computer manually . St art IP Address Specify an IP address for the DHCP Serv er to start wi[...]

User ’s Man ual of WNRT -617 -76- Figure 5-33 DHCP Clients List The page incl udes the following fields: Object Description ID The index of the DHCP Cli ent Client Name The name of the DHCP client MAC Address The MAC address of the DHCP client Assigned IP The IP addre ss that the Router ha s allocated to the DHCP client. Lease Time The time of th[...]

User ’s Man ual of WNRT -617 -77- Figure 5-34 Addre ss Reservation The page incl udes the following fields: Object Description MAC Address The MAC address of the PC for whi c h you want to reserve IP addre ss. Assigned IP Address The IP address of the Router reserved. Stat u s The status of this entry either Enabled or Disabled . To Reserve IP ad[...]

User ’s Man ual of WNRT -617 -78- T o modify or delete an existing entry: Step 1. Click the Modify in the entry you want to modify . If y ou want to delete the entry , click the Delete . Step 2. Modify the information. Step 3. Click the Save button. Click the Enable/ Disabled All button to make all entries enable d/disabled Click the Delete All b[...]

User ’s Man ual of WNRT -617 -79- 5.10 Forwarding There are four submenus under t he Forwarding menu (shown in Figure 5-37 ): Virtual Servers , Port T riggering , DMZ and UPnP . Click any of them, and you will be able to configure the corresponding function. Figure 5-37 The Forwa rding menu 5.10.1 Virtual Servers Choose menu “ Forwarding → Vi[...]

User ’s Man ual of WNRT -617 -80- service ports (in XXX – YYY format, XXX is the start port number , YYY is the end port number). IP Addres s The IP Address of the PC prov iding the service application. Protocol The protocol used for this application, eit her TCP , UDP , or All (all protocols supported by the Router). Stat u s The status of thi[...]

User ’s Man ual of WNRT -617 -81- T o modify or delete an existing entry: Step 1. Click the Modify in the entry you want to modify . If y ou want to delete the entry , click the Delete . Step 2. Modify the information. Step 3. Click the Save button. Click the Enable/ Disabled All button to make all entries enable d/ disabled. Click the Delete All[...]

User ’s Man ual of WNRT -617 -82- 5.10.2 Port Triggering Choose menu “ Forwarding → Port T riggering ”, and you can view and add port triggering in the next screen (s hown in Figure 5-40 ). Some applications require multiple connections, like Internet game s, video confe rencing, Internet calling and so on. These application s cannot work w[...]

User ’s Man ual of WNRT -617 -83- 2000-2038, 2050-2051, 2 085, 3010-3030. Incoming Protocol The protocol used for Incoming Port s Range, either TCP or UDP , or ALL (all protocols supported by the Router). Stat u s The status of this entry either Enabled or Disabled . To add a new rule, follow the steps below. Step 1. Click the Add New … button,[...]

User ’s Man ual of WNRT -617 -84- 2. Modify the information. 3. Click the Save button. Click the Enable All button to make all entries enabled Click the Disabled All button to make all entries disa bled. Click the Delete All button to delete all entries 1) When the trigger connection is released, the related opening port s will be closed. 2) Each[...]

User ’s Man ual of WNRT -617 -85- Step 3. Click the Save button. After you set the DMZ host, the firewall related to the host will not work. 5.10.4 UPnP Choose menu “ Forwarding → UPnP ”, and you can view the information ab out UPnP (Universal Plug and Play) in the screen (shown in Figure 5-43 ).The UPnP feature allows the de vices, such a [...]

User ’s Man ual of WNRT -617 -86- Protocol - Shows which type of protocol is opened. Internal Port - Internal port, which the router opened for local host. IP Address - The UPnP device that is currently accessing the router. Sta t us - The port’s status displaye d here. “Enabled” mea ns that port is still active. Otherwi se, the port is ina[...]

User ’s Man ual of WNRT -617 -87- Figure 5-45 Basic Security The page incl udes the following fields: Object Description Firewall A firewall protects your network from the outside world. Here you can enable or disable the Router’s firewall. SPI Firew all - SPI (Stateful Packet Inspection, also known as dynamic packet filtering) helps to prevent[...]

User ’s Man ual of WNRT -617 -88- Router, keep the default, Enabled . L2TP Passthrough - Layer 2 Tunneling Protocol (L2TP) is the method used to enable Point-to-Point se ssions via the Internet on the Layer 2 level. To allow L2TP tunnels to pa ss through the Router, keep the default, Enabled . IPSec Passthrough - Internet Protocol Security (IPSec[...]

User ’s Man ual of WNRT -617 -89- Figure 5-46 Advanced S ecurity The page incl udes the following fields: Object Description Packets Statistics Interval (5~60) The default value is 10. Select a value between 5 and 60 se conds from the drop-down list. The Packets S tatistics Interval value indicates the time section of the packet s statistics. The[...]

User ’s Man ual of WNRT -617 -90- Threshold (5~3600) Router will startup the blocking function i mmediately . Enable UDP-FLOOD Filtering Enable or Disable the UDP-FLOOD Filte ring. UDP-FLOOD Packets Threshold (5~3600) The default value is 500. Enter a value between 5 ~ 3600. When th e current UPD-FLOOD Packets number is beyond the set value, the [...]

User ’s Man ual of WNRT -617 -91- Figure 5-47 Local Ma nagement By default, the radio button “ All the PCs on the LAN are allo wed to access the Router's Web-Based Utility ” is checked. If you want to allow PCs wi th specific MAC Addre sses to access the Setup page of the Router's Web-Based Utility locally from inside the network, c[...]

User ’s Man ual of WNRT -617 -92- 5.11.4 Remote Management Choose menu “ Security → Remote Management ”, and you can configure the Remote Management function in the screen as shown in Figure 5-48 . This feature allo ws you to manage your Ro uter from a remote location via the Internet. Figure 5-48 Remote Ma nagement The page incl udes the f[...]

User ’s Man ual of WNRT -617 -93- 5.12 Parental Control Choose menu “ Parent al Control ”, and you can configure the p arent al co ntrol in the screen as shown in Figure 5-49 . The Parent al Control function can be used to control the inte rnet activities of the child, limit the child to access certain websit es and re strict the time of surf[...]

User ’s Man ual of WNRT -617 -94- For detailed i nformation, please go to “ Access Control → Schedule ”. Modify Here you can edit or delete an existing entry. To add a new entry, please follo w the steps below. Step 1. Click the Add Ne w … button and the next screen will pop-up as shown in Figure 5-49 . Step 2. Enter the MAC addre ss of t[...]

User ’s Man ual of WNRT -617 -95- Figure 5-50 Add or Modify Parental Control Entry For example : If you desire that the child PC with MA C address 00-11 -22-33-44-AA can access www.google.com on Saturday only while the parent PC with MAC address 00-11-22-33-44-BB is without any restriction, you sh ould follow the settings below. Step 1. Click “[...]

User ’s Man ual of WNRT -617 -96- Enter “www.google.com” in the Allo wed Domain Name field. Select “Schedule_1” you create just no w from the Effective Time drop-down list. In Status field, select Enable. Step 4. Click Save to complete the settings. Then you will go back to the Parental Control Settings page and see the following list, as[...]

User ’s Man ual of WNRT -617 -97- 5.13 Access Control There are four submenus under the Access Contro l menu as shown in Figure 5-52 : Rule , Host , Ta r g e t and Schedule . Click any of them, and you will be able to configure the corresponding functio n. Figure 5-52 A ccess Control 5.13.1 Rule Choose menu “ Access Control → Rule ”, and yo[...]

User ’s Man ual of WNRT -617 -98- Object Description Enable Internet Acc ess Control Select the check box to enable the In ternet Access Control function, so the Default Filter Policy can take effect. Rule Name Here displays the name of the rule and this name is unique. Host Here displays the host selected in the corresp onding rule. Target Here [...]

User ’s Man ual of WNRT -617 -99- in the first box you want to move and another ID number in se cond box you want to move to, and then click the Move button to change the entry’s order. Click the Next button to go to the next page, or click the Previous button return to the previous page. Figure 5-54 Add or Modi fy Internet Access Control Entry[...]

User ’s Man ual of WNRT -617 -100- In Host field, select Host_1. In Target field, select Target_1. In Schedule field, select Schedule_1. In Action field, select Allow. In Status field, select Enable. Click Save to complete the settings. Then you will go back to the Access Co ntrol Rule Management page and see the following list. Figure 5-55 Acces[...]

User ’s Man ual of WNRT -617 -101- 5.13.2 Host Choose menu “ Access Control → Host ”, and you can view and set a Host list in the screen as shown in Figure 5-56 . The hos t list is necessary for the Access Control Rule. Figure 5-56 A ccess Control ho st Settings The page incl udes the following fields: Object Description Host Description He[...]

User ’s Man ual of WNRT -617 -102- Click the Delete All button to delete all the entries in the table. Click the Next button to go to the next page, or click the Previous button return to the previous page. Figure 5-57 Add or Modi fy a Host Entry – IP Mode Figure 5-58 Add or Modify a Host Entry – MAC Address Mode For example : If you desire t[...]

User ’s Man ual of WNRT -617 -103- Figure 5-59 Host Settings List 5.13.3 Target Choose menu “ Access Control → Ta r g e t ”, and you can view and set a T arget list in the screen as shown in Figure 5-60 . The target list is necessary for the Access Control Rule. Figure 5-60 T arget Settings The page incl udes the following fields: Object De[...]

User ’s Man ual of WNRT -617 -104- To add a new entry, please follo w the steps below. Step 1. Click the Add New … button. Step 2. In Mode field, select IP Ad d ress or Domain N ame. If you select IP Address , the screen shown i s Figure 5-61 . 1. In Target Description field, create a unique descri ption for the target (e.g. Target_1). 2. In IP[...]

User ’s Man ual of WNRT -617 -105- Figure 5-62 Add or Modify an Access T arget Entry For example : If you desire to restrict the internet activities of host with MAC address 00-11-22-33-44-AA in the LAN to access www.go ogle.com only, you should first follow the settings below: Step 1. Click Add New… button in Figure 5-63 to enter the Add or Mo[...]

User ’s Man ual of WNRT -617 -106- Figure 5-63 Target Settings Li st 5.13.4 Schedule Choose menu “ Access Control → Schedule ”, and you can view and set a Schedule list in the next screen as shown in Figure 5-64 . The Sche dule list is necessary for the Access Control Rule. Figure 5-64 Schedul e Settings The page incl udes the following fie[...]

User ’s Man ual of WNRT -617 -107- To add a new schedule, follo w the steps belo w . Step 1. Click Add New ... button shown in Figur e 5-64 and the next screen will pop -up as shown in Figure 5-65 . Step 2. In Schedule Description field, create a unique description for the schedule (e.g. Schedule_1). Step 3. In Day field, select the day or days y[...]

User ’s Man ual of WNRT -617 -108- Step 1. Click Add Ne w... button shown in Figure 5-66 to enter the Advanced Sche dule Settings page. Step 2. In Schedule Description field, create a unique description for the schedul e (e.g. Schedule_1). Step 3. In Day field, check the Sele ct Days radio button and then select Sat and Sun. Step 4. In Time field[...]

User ’s Man ual of WNRT -617 -109- in Figure 5-68 ). A static route is a pre-determin ed path that network information must travel to reach a specific host or network. Figure 5-68 S tatic Routing T o add static routing en tries: Step 1. Click Add New… shown in Figure 5-69 , you will see the following screen. Figure 5-69 Add or Modi fy a S tatic[...]

User ’s Man ual of WNRT -617 -1 10- Stat u s Select Enabled or Disabled for this ent ry on the Status pull-down list. Step 3. Click the Save button to make the entry take effect. Other configurations for the en tries: Click the Delete button to delete the entry . Click the Enable All button to enable all the entries. Click the Disable All button [...]

User ’s Man ual of WNRT -617 -1 1 1- 5.15 Bandwidth Control There are two submenus unde r the Bandwidth Cont rol menu as shown in Figure 5-71 . Click a ny of them, and you will be able to config ure the corresponding function. The d etailed explanation s for each submenu are provided belo w . Figure 5-71 Bandwi dth Control 5.15.1 Control Settings[...]

User ’s Man ual of WNRT -617 -1 12- Ingress Bandwidth The download speed thro ugh the W AN port. 5.15.2 Rules List Choose menu “ Bandwid th Control → Rules List ”, you can view and configure the Bandwidth Control rules in the screen below . Figure 5-73 Bandwidth Control Rules List The page incl udes the following fields: Object Description [...]

User ’s Man ual of WNRT -617 -1 13- Figure 5-74 Bandwi dth Control Rule Settings Step 3: Click the Save button. 5.16 IP & MAC Binding There are two submenus under the IP &MAC Binding menu (shown in Figure 5-75 ): Binding Settings and ARP List . Click any of them, and you will be able to scan or configure the co rresponding functio n. The [...]

User ’s Man ual of WNRT -617 -1 14- Figure 5-76 Binding Setting The p age include s the following fields: Object Description MAC Address The MAC address of the contro lle d computer in the LAN. IP Address The assigned IP address of the c ontrolled computer in the LAN. Bind Check this option to enable ARP binding for a specific device. Modify To m[...]

User ’s Man ual of WNRT -617 -1 15- Figure 5-77 IP & MAC Binding Setting (Add & Modify) To add IP & MAC Binding entries, follo w the steps below. Step 1. Click the Add New ... button as shown in Figure 5-76 . Step 2. Enter the MAC Addres s and IP Address. Step 3. Select the Bind checkbox. Step 4. Click the Save button to save it. To m[...]

User ’s Man ual of WNRT -617 -1 16- Figure 5-78 Find IP & MAC Binding Entry Click the Enable All button to make all entries enabled. Click the Delete All button to delete all entries. 5.16.2 ARP List T o manage the computer , you could observe the comput ers in the LAN by checking the relationship of MAC address and IP address on the A RP lis[...]

User ’s Man ual of WNRT -617 -1 17- The page incl udes the following fields: Object Description MAC Address The MAC address of the contro lle d computer in the LAN. IP Address The assigned IP address of the c ontrolled computer in the LAN. Status Indicates whether or not the MAC and I P addresses are bo und. Configure Load or delete an item. Load[...]

User ’s Man ual of WNRT -617 -1 18- 5.17 Dynamic DNS Choose menu “ Dynamic DNS ”, and you can configure the Dynam ic DNS function. The Router offers the DDNS (Dyna mic Domain Name System) feat ure, which allows the hosting of a website, FTP server , or e-mail s erver with a fixed domain name (named by your self) and a dynamic IP address, and [...]

User ’s Man ual of WNRT -617 -1 19- To set up for DDNS, follow these instructions: Step 1. T ype the Domain Name received from your dynamic DNS service provider . Step 2. T ype the User Name for your DDNS account. Step 3. T ype the Passw ord for your DDNS account. Step 4. Click the Login button to log in to the DDNS service. Connection Status - T[...]

User ’s Man ual of WNRT -617 -120- Step 3. T ype the Domain Name you received from dynamic DNS service provider here. Step 4. Click the Login button to log in to the DDNS service. Connection Status - The status of the DDNS servic e conne ction is displayed here. Click Logout to logout of the DDNS se rvice. 5.17.3 No-ip.com DDNS If the dynamic DNS[...]

User ’s Man ual of WNRT -617 -121- 5.17.4 Planetddns.com DDNS First of all, please go to http://www .planetddns.com to register a Planet DDNS account, an d refer to the F AQ ( http://www .planetddn s.com/index.php/faq ) for how to register a free account. Figure 5-70 Planet DDNS W ebsite When you finish your DDNS account, please return to Networ [...]

User ’s Man ual of WNRT -617 -122- Figure 5-84 Planet ddns.com DDNS Settings To set up for DDNS, follow these instructions: Step 1. T ype the User Name for your DDNS account. Step 2. T ype the Passw ord for your DDNS account. Step 3. T ype the Domain Name you received from dynamic DNS service provider . Step 4. Click the Login button to log in th[...]

User ’s Man ual of WNRT -617 -123- 5.18 System T ools Choose menu “ System T ools ”, and you can see the submenus under the main menu: T ime Settings , Diagnostic , Firmware Upgrade , Factory Default s, Backup & Restore, Reboot, Password, System Log and S t atistics. Click any of them, and you will be able to configure the corresponding f[...]

User ’s Man ual of WNRT -617 -124- The page incl udes the following fields: Object Description Time Zone Select your local time zone from this pull down li st. Date Enter your local date in MM/DD/YY into the right blanks. Tim e Enter your local time in HH/MM/SS into the right blanks. NTP Serv er Prior Enter the address for the NTP Server , then t[...]

User ’s Man ual of WNRT -617 -125- 5.18.2 Diagnostic Choose menu “ System T ools → Diagnostic ”, and you can transact Ping or T raceroute function to check connectivity of your network in th e following screen. Figure 5-88 Diagnostic T ools The page incl udes the following fields: Object Description Diagnostic T ool Check the radio button t[...]

User ’s Man ual of WNRT -617 -126- Pings Count The number of Ping p ackets for a Ping conne ction. Ping Packet Size The size of Ping packet. Ping Timeout Set the waiting time for the reply of each Ping packet. If there is no reply in the specified time, the connection is ov ertime. T raceroute Max TTL The max number of hops fo r a T raceroute con[...]

User ’s Man ual of WNRT -617 -127- 5.18.3 Firmw are Upgrade Choose menu “ System T ools → Firmware Upgrade ”, and you can update the latest version of firmware for the Router on the following screen. Figure 5-90 Firmware Upgrade The page incl udes the following fields: Object Description Firmware Version This displays the current firmware v[...]

User ’s Man ual of WNRT -617 -128- 5.18.4 Factory Defaults Choose menu “ System T ools → Factory Default s ”, and you can restore the configurations of the Router to factory default s on the following screen Figure 5-91 Restore Factory Default Click the Restore button to reset all configuration settings to their d efault values. The default[...]

User ’s Man ual of WNRT -617 -129- 5.18.5 Backup & Restore Choose menu “ System T ools → Backup & Restore ”, and you can save the current config uration of the Router as a backup file and restore the configuration vi a a backup file as shown in Figure 5-92 . Figure 5-92 Backu p & Restore Configuration Click the Backup button to [...]

User ’s Man ual of WNRT -617 -130- Change the LAN IP Address (syste m will reboot automatically). Change the DHCP Settings. Change the Wireless conf igurations. Change the Web Manage ment Port. Upgrade the firmware of the Router (system will reboot automatically). Restore the Router's settings to factory defaults (system will reboot automati[...]

User ’s Man ual of WNRT -617 -131- Click the Save button when finished. Click the Clear All button to clear all. 5.18.8 System Log Choose menu “ System T ools → System Log ”, and you can view the logs of the Router. Figure 5-95 System Log The page incl udes the following fields: Object Description Auto Mail Feature Indicates whether auto ma[...]

User ’s Man ual of WNRT -617 -132- Figure 5-96 Mail Ac count Settings The page incl udes the following fields: Object Description From Your mail box address. The Router would connect it to send logs. To Recipient’s addres s. The destination mailbox where the logs wo uld be received. SMTP Server Your smtp server. It corresponds wi th the mailbox[...]

User ’s Man ual of WNRT -617 -133- Only when you select Authentication, you have to enter the User Na me and Password in the following fields. Figure 5-97 Mail Account Settings - Authentication Click Save to keep your settings. Click Back to return to the previous page. The system log pa ge includes the following fields: Object Description Log Ty[...]

User ’s Man ual of WNRT -617 -134- 5.18.9 Statistics Choose menu “ System T ools → St atistics ”, and you can view the statistics o f the Router, including total traffic and current traffic of the last Packets Statistic Interval. Figure 5-98 S tatist ics The page incl udes the following fields: Object Description Current Statistics Status E[...]

User ’s Man ual of WNRT -617 -135- Statistics Table: IP/MAC Address The IP and MAC address are displayed with related statistics. Packets The total number of packets receiv ed an d transmitted by the Router. Total Bytes The total number of bytes received and transmitted by the Router. Packets The total number of packets received and transmi tted [...]

User ’s Man ual of WNRT -617 -136- Chapter 6. Quick Connection to a Wireless Network 6.1 Windows XP (Wireless Zero Configuration) Ste p 1 : Right-Click on the wireless network icon di splayed in the system tray Figure 6-1 Wireless Zero Configuration Ste p 2 : Select [ Vie w A vailable Wireless Net works ] Ste p 3 : Highlight and select the wirele[...]

User ’s Man ual of WNRT -617 -137- Ste p 4 : Enter the encryption key of the Wirele ss Router (1) The Wireless Network Connection box will appear (2) Enter the encryption key that is configured in Section 5.6.2 (3) Click the [Connect] button Figure 6-3 Enter the encryption key Ste p 5 : Check if “ Connected ” is displayed Figure 6-4 Wireless [...]

User ’s Man ual of WNRT -617 -138- Some laptops a re equipped with a “Wireless ON/ OFF” switch for the intern al wireless LAN. Make sure the hardwa re wireless switch is swit ch to “ON” positi on. 6.2 Windows 7 (WLAN AutoConfig) WLAN AutoConfig service is built-in in Windows 7 th at can be use d to detect and connect to wireless network. [...]

User ’s Man ual of WNRT -617 -139- If you will be connecting to this Wireless Route r in the future, check [ Connect automatically ]. Ste p 4 : Enter the encryption key of the Wirele ss Router (1) The Connect to a Network box will appear (2) Enter the encryption key that is configured in Section 5.6.2 (3) Click the [OK] button Figure 6-7 WLAN Aut[...]

User ’s Man ual of WNRT -617 -140- Figure 6-9 WLAN AutoConfig – Connected[...]

User ’s Man ual of WNRT -617 -141- 6.3 Mac OS X 10.x .3 Mac OS X 10.x Ste p 1 : Right-Click on the network icon displayed in the system tray The AirPort Network C onnection menu will appear Figure 6-10 The AirPort Network Connection icon Ste p 2 : Highlight and select the wireless netwo rk (SSID) to connect (1) Select and SSID [PLANET_WNRT -617] [...]

User ’s Man ual of WNRT -617 -142- Figure 6-12 The AirPort Network Connectio n – enter password If you will connect this Wireless Router in the future, check [ Remember this network ]. Ste p 5 : Check if the AirPort is connected to the selected wireless network. If “Y es”, then there will be a “check” symbol in the front of the SSID. Fi[...]

User ’s Man ual of WNRT -617 -143- 6.4 iPhone / iPod T ouch / iPad .4 iPhone / iPod T ouch / iPad Ste p 1 : T ap the [ Settings ] icon displayed in the home screen Figure 6-14 The Wi-Fi Settings in iPhone/iPod T ouch/iPad Ste p 2 : Check Wi-Fi setting and sele ct the available wireless network (1) T ap [ General ] [ Network ] (2) T ap [ Wi-Fi ][...]

User ’s Man ual of WNRT -617 -144- Figure 6-16 General Settings – Not Connected Ste p 3 : T ap the target wireless network (SSID) in “ Choose a Network… ” (1) Turn on Wi-Fi by tapping “ Wi-Fi ” (2) Select SSID [PLANET_WNRT -617] Figure 6-17 General Settings – Wi-Fi On Ste p 4 : Enter the encryption key of the Wirele ss Router (1) Th[...]

User ’s Man ual of WNRT -617 -145- Figure 6-18 General Settings – Enter password Ste p 5 : Check if the iDevice is connected to the sele cted wireless network. If “Y es”, then there will be a “check” symbol in the front of the SSID. Figure 6-19 General Settings – Wi-Fi Network Connected[...]

User ’s Man ual of WNRT -617 -146- Appendix A: FAQ 1. How do I configure the Router to ac cess Internet by ADSL users? 1) First, configure the ADSL Modem configured in RFC1483 bridge model. 2) Connect the Ethernet cable from your ADSL Modem to the W AN port on the Router . Plug the telephone cord into the Line port of the ADSL Modem. 3) Login to [...]

User ’s Man ual of WNRT -617 -147- 1. Sometimes the connection cannot be discon nected although you specify a time to Max Idle T ime, since some applicant s are visiting the Internet continually in the background. 2. If you are a Cable user , please co nfigure the Rout er following the above steps. 2. How do I configure the Router to ac cess Inte[...]

User ’s Man ual of WNRT -617 -148- “Service Port” blank, and your IP address for the “IP Address” blank, taking 1 92.168.1.169 for an example, remember to Enable and Save . Figure A-3 Virtual Servers Figure A-4 Add or Modify a V irtual Server Entry Y our opposite side should call your W AN IP , which is displayed on the “S tatus” page[...]

User ’s Man ual of WNRT -617 -149- type your IP address int o the “DMZ Host IP Address” field, us ing 192.168.1.169 as an example, remember to click the Save button. Figure A-5 D M Z 5) How to enable H323 ALG: Log in to the Router , click the “ Security ” menu on the left of your browser , and click “ Basic Security ” submenu. On the [...]

User ’s Man ual of WNRT -617 -150- Figure A-6 Basic Security 4. I want to build a WEB Server on the LAN, what should I do? 1) Because the WEB Server port 80 will i nte rfere with the WEB management port 80 on the Router , you must change the WEB management port number to avoid interfe rence. 2) T o change the WEB management port number: Log in to[...]

User ’s Man ual of WNRT -617 -151- Figure A-7 Remote Management If the above configuration takes ef fect, y ou can configure the Router by typing http://192.168.1.1:88 (the Router ’s LAN IP address: Web Manage ment Port) in the address field of the W eb browser . 3) Log in to the Router , click the “ Forwarding ” menu on the left of your br[...]

User ’s Man ual of WNRT -617 -152- Figure A-9 Add or Modify a V irtual Server Entry 5. The wireless st ations cannot be connected to the Router . 1) Make sure the " Wireless Router Radi o " is enabled. 2) Make sure that the wireless st ations' SSID is in accord with the Router's SSID. 3) Make sure the wireless st ations have t[...]

User ’s Man ual of WNRT -617 -153- Appendix B: Configuring the PCs In this section, we’ll introduce how to inst all and configure the TCP/IP correct ly in Windows XP . First make sure your Ethernet Adapter is working, refer to the adapter ’s manual if needed. 2. Inst all TCP/IP component 1) On the Windows taskbar , click the Star t button, po[...]

User ’s Man ual of WNRT -617 -154- Figure B-2 TCP/IP Settings 5) The following TCP/IP Prop erties window will display and the IP Address tab is open on this window by default. Now you have two ways to configu re the TCP/IP protocol bel ow:  Setting IP ad dress automatically Select Obt ain an IP address automatically , Choose Obt ain DNS server[...]

User ’s Man ual of WNRT -617 -155- Figure B-3 TCP/IP – Obt ain an IP address automatically  Setting IP ad dress manually 1 Select Use the following IP address radio button. 2 If the Router's LAN IP address i s 192.168.1.1, ty pe in IP address 192.168.1.x (x is from 2 to 254), and Subnet mask 255.255.255.0. 3 T ype the Router ’s LAN IP[...]

User ’s Man ual of WNRT -617 -156- Figure B-4 TCP/IP Settings – S tatic IP Now click OK to keep your setting s.[...]

User ’s Man ual of WNRT -617 -157- Appendix C: Specifications Product WNRT -617 150Mbps 802.1 1n Wireless Broadband Router Hardware Specifications WA N Port : 1 x 10/100M bps Auto MDI/MDI - X RJ45 port Interface LAN Port : 4 x 10/100M bps Auto MDI/MDI - X RJ45 port Gain: 1 x Fixed 5dBi Antenna Antenna Orientation: Omni-directional Power Button Po[...]

User ’s Man ual of WNRT -617 -158- WEP ( 64/128/152-bit ) encryption secu rity Encryption Security WP A-PSK / WP A2-PSK (TKIP/AES) WP A / WP A2 (TKIP/AES) WP A / WP A2 enterprise mode (802.1x authentication ) Provide wireless LAN ACL (Acc ess Control List) filtering Wireless MAC address filtering Support WPS(WIFI Protected Setup ) Wireless Securi[...]

User ’s Man ual of WNRT -617 -159- Windows XP Mac OS X 10.4 and higher St andards Conformance IEEE St andards IEEE 802.1 1n (1T 1R, up to 150Mbps) IEEE 802.1 1g IEEE 802.1 1b IEEE 802.1 1i IEEE 802.3 10Base-T IEEE 802.3u 100Base-TX IEEE 802.3 x Flow Control Other Protocols and St andards CSMA/CA, CSMA/CD, TC P/IP , DHCP , ICMP , NA T , PPPoE, SNT[...]

User ’s Man ual of WNRT -617 -160- Appendix D: Glossary  802.11n - 802.11n builds upon previou s 802.11 standar ds by adding MIMO (multiple-input multiple-output). MIMO uses mu ltiple transmitter and receiver antennas to allow for increased data throughput via spatial multiplexing and in creased range by exploiting the spatial diversity, perha[...]

User ’s Man ual of WNRT -617 -161-  SSID - A S ervic e S et Id entification is a thirty-two character (ma ximum) alphanume ric key identifying a wireless local area network. For the wirel ess devices in a network to communicate with ea ch other, all devices must be configured with the same SSID. This is typically the configuration parameter fo[...]

EC Declaration of Conformity For the following equipment: *T ype of Product: 150Mbps 802.1 1n W ireless Broadband Router *Model Number: WNR T -617 * Produced by: Manufacturer‘s Name : Planet T echnology Corp. Manufacturer‘s Address: 10F ., No.96, Minquan Rd., Xindian Dist., New T aipei City 231, T aiwan (R.O.C.) is herewith confirmed to comply [...]

User ’s Man ual of WNRT -617 -162- EC Declaration of Conformity English Hereby , PLANET T echnolog y Corporation, declares that this 802.1 1n Wireless Broa dband Router is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Lietuviškai Šiuo PLANET T echnology Corporation, , skelbia, kad 802.1 1n W[...]