Polycom VR630/07 manual

VCR VR630/07 VR730/07 VR732/07 VR830/07 VRQ45/07 VR830 VR630/07 02.2.6 10:13 AM Page 1[...]

3 EN 1. Connecting the video recorder . . . . . . . . . . . .4 Impor tant for the United Kingdom . . . . . . . . . . .4 Preparing the remote control for operation . . . . .4 Connecting your video recorder to the TV set . .4 Connecting with a scar t cable and ‘Easy Link’ [VR830] . . . . . . . . . . . . . . . . . . . . . .4 Connecting with a scar[...]

2 EN Tha nk you f or buying a Philips video recorder . This video recorder is one of the most sophisti- cated and easy-to-use video recorders (VCR) on the market. Please take the time to read this operating manual bef ore using your video recorder . It contains impor tant information and notes regarding operation. The video recorder should not be t[...]

4 EN Important for the United Kingdom This apparatus is fitted with an approv ed moulded 10 Amp plug. T o change a fuse in this type of plug pro- ceed as follo ws: 1. 1. Remov e fuse cover and fuse . 2. 2. Fix new fuse which should be a BS1362 3A,AST A or BSI approved type. 3. 3. Refit the fuse cov er . If the fitted plug is not suitable f or your [...]

5 EN 1. 1. Switch off your TV set. 2. 2. Remov e the aer ial cable plug from y our TV set. Inser t it into the AERIAL at the back of the video recorder . 3. 3. Inser t one end of the supplied aerial cable into the RF OUT at the back of the video recorder and the other end into the aerial input socket at the bac k of the TV set. 4. 4. Plug in a scar[...]

6 EN Then, read the paragraph 'Prepar ation for use' in the chapter 'Installing your video recorder'. Connecting without a scart cable Hav e the following cab les ready: an aerial cable. 1. 1. Switch off your TV set. 2. 2. Remov e the aer ial cable plug from the aerial input socket of the TV set. Inser t it into the AERIAL at th[...]

Navigation in the screen menu Y ou can check/change man y functions and set- tings of your video recorder via the on-screen menu. The individual functions are selected, via the remote control as follo ws: Call up the menu: with . To select: with . To enter or change y our selection: with the n umber buttons or with . To s a ve or confirm: with . To[...]

8 EN Preparation for use This chapter shows y ou how to prepare the video recorder for use . The video recorder automatically seeks out and stores all av ailable TV channels. 1. 1. Press . The automatic channel search star ts. 2. 2. 'TIME' and 'D A TE' will appear on the TV screen. 3. 3. Check 'TIME'. If required, plea[...]

9 EN Manual TV channel searc h In some cases it can occur that all TV channels are not found and sa ved during the first installa- tion. In this case, the missing TV channels must be searched for and stored man ually . 1. 1. Switch on the TV set. If required, select the programme number f or the video recorder . 2. 2. Press . The main menu will app[...]

10 EN Sorting TV channels automatically (Follow TV) When the automatic channel search function is activated, the TV channels are saved in a specific order . This may v ar y from the order of TV chan- nels on the TV . This function changes the order of TV channels sav ed in the video recorder to match that of the TV . Make sure that the video record[...]

11 EN Sorting and clearing TV channels manually After you ha ve perf or med the automatic channel search you ma y not agree with the sequence in which the individual TV channels hav e been allo- cated to the programme positions (progr amme n umbers) of the video recorder . Y ou can use this function to individually sor t the TV channels already sav[...]

12 EN Setting the RF out channel In some reception locations it is possible that a TV channel will be sent on the same or similar frequency as the video recorder . Result: As soon as the video recorder is s witched on, the reception quality f or this or sev- eral other TV channels will decrease. The follo wing steps will show you ho w to change the[...]

13 EN General information 'T ape List' helps you keep trac k of which movie is on which cassette. T ape List gives y ou also a quick and easy access to recordings . If desired, the video recorder will rewind to the beginning of the selected recording and auto- matically star t playbac k. Adding a cassette to the T ape List Y ou can add an[...]

14 EN 1. 1. Press on the remote control. An ov erview of all sav ed titles/cassettes from the T ape List appears on the screen. 2. 2. Using select the title to be edited. 3. 3. Press . 4. 4. Using select the position where the letter/symbol/number is to be changed or re-entered. 5. 5. Change the desired symbol using . 6. 6. Repeat step 4 and step 5[...]

15 EN Playing cassettes Y ou can use this video recorder to play bac k recorded VHS videocassettes. Y ou can operate the video recorder using the remote control or the buttons on the front of the video recorder . Y our video recorder can only record and play standard VHS cassettes. 1. 1. Put a cassette into the cassette slot. The cas- sette is inse[...]

16 EN Searc hing for a tape position with picture (scanning) 1. 1. While a cassette is pla ying, press (rev erse) or (forw ard) one or more times. 2. 2. Press to resume playbac k. Still picture / slow motion 1. 1. During playbac k, press to stop the tape and display a still picture . 2. 2. During playbac k, press to play the tape in slow motion. 3.[...]

17 EN General information Use 'Manual Recording' to make a sponta- neous recording (for e xample, a progr amme cur- rently being shown). If you w ant to star t and stop a recording manual- ly , read the section 'Recording without auto- matic switch-off' . If you w ant to star t a recording manually but hav e it stopped automatic[...]

18 EN 4. 4. Now start recording as usual by pressing on the remote control. 5. 5. Stop recording with . Selecting the recording speed (SP or LP) LP allows to doub le the recording duration on tape (for e xample six hours instead of three hours on an E180 cassette). 1. 1. Switch on the TV set. If required, select the programme number f or the video [...]

19 EN 'Direct Record' With Direct Record, you can record the right TV channel in seconds ev en if your video recorder is s witched off . If the recording is star ted manually , the video recorder uses the current TV channel set on the TV . Y ou will find more inf or mation on how to s witch 'Direct Record' on or off in the next [...]

20 EN General information Use a TIMER programming to automatically star t and stop a recording at a later time or date. The video recorder will switch to the right progr amme n umber and begin recording at the correct time. With this video recorder , you can pre-programme up to eight recordings within a period of one y ear . T o make a progr ammed [...]

21 EN 6. 6. The decoded data appears after confirma- tion. Y ou can go back to change the data. Select the corresponding input field using . Change the data with . 7. 7. When all inf or mation are correctly , press . The programming inf or mation is stored in a TIMER block. 8. 8. Inser t a cassette with an intact security tab (unprotected). 9. 9. S[...]

22 EN 6. 6. With buttons you can enter 'ST ART' (star t time) , 'ST OP' (end time) , 'PROG.' (pro- gr amme number) ‘VPS/PDC’ and 'DA TE'. 7. 7. When all inputs are correct, press . The programming inf or mation is stored in a TIMER block. 8. 8. Insert a cassette with an intact secur ity tab (unprotected).[...]

6. 6. Switch off with . The programmed recording will only function when the video recorder is switched off with . Set T op Box Contr ol [VR830] With the Sat Mouse, y our video recorder can select broadcasts y ou receiv e on your Set T op Box. Y ou will need the Set T op Bo x Control to programme the record- ing of a TV channel you can only receiv [...]

24 EN 8. 8. Inser t a cassette with an intact security tab (unprotected). 9. 9. Switch off with . The programmed recording will only function when the video recorder is switched off with . Prob lems and solutions for pro- grammed recordings How to chec k, or delete a pro- grammed recording (TIMER) 1. 1. Switch on the TV . If required, select the pr[...]

25 EN Switching the status displa y off or on Along with the on screen menu, the status dis- play also displa ys information on the current operating status (counter , playbac k, recording, TV channel, etc.) on the TV screen. Y ou can s witch off the inf ormation about the operating status so that the status display is not recorded when copying vid[...]

26 EN 4. 4. Select 'A UT O ST ANDBY' using . 5. 5. Select 'OFF' (no automatic s witch-off) or 'ON' (automatic switch-off) with . 6. 6. To end, press . Selecting the sound channel Y ou can select the desired sound channel during playbac k or while receiving TV channels via the video recorder . This allows y ou to select[...]

27 EN 9. Bef ore you call an engineer Y our video recorder does not respond to any b utton being pressed: * There is no power supply: check the po wer supply . * A programmed recording is currently being made: if desired, cancel the programmed recording. Please see the section 'How to check or delete a programmed recording' in chapter &ap[...]

EN PHILIPS NORGE AS Sandstuveien 70, PO Box 1, Manglerud N-0612 Oslo NORWAY Phone: 2274 8250 OY PHILIPS AB Sinikalliontie 3, 02630 Espoo FINLAND puh. 09 615 80 250 PHILIPS KUNDTJÄNST Kottbygatan 7, Akalla, 16485 Stockholm SWEDEN Phone: 08-598 52 250 PHILIPS POLSKA AL. Jerozolimskie 195B 02-222 Warszawa POLSKA TEL.: (022)-571-0-571 PHILIPS SERVICE [...]