POSIFLEX Business Machines 5800G manual

Part 1 FCC Notes: This equipment gen erates, uses, and can radi ate radio frequ ency energy and , if not installed and used in accordance with the instructions manual, ma y cause interference to radio communications. It has been tested and found to comply with limits for a Class A digital device pursuant to subpart J of Part 15 of FCC Ru les, which[...]

Part 2 Standard Features: a) CPU: Celeron compatible C3 800 MHz or up for Jiv a TP/LT-5700G; C3 1.0GHz for Jiva TP/ LT- 5 8 00 G b) A base design supporting o pt i onal UP S bat t ery storage c) Support Win98, Win 2000, Win CE, Win XP Pro and Linux environm ent for Jiva TP/ LT-5800G d) Support Win CE.NET on CF card o r Linux LA N boot f or Jiva TP/[...]

Part 3 XP Pro Optional Items: Note: The underlined items in the following list means that option must be set prior to shipment from the factory. The rest items can be set by the dealers. a) DDR26 6 SDRAM m emory expa nsion up t o 1GB b) Audio am plifier circuit an d a pair of speakers in ca ble cover area c) Side mount up gra de kit among:  Delu[...]

Part 4 INST ALLA TION GUIDES CAUTION: B efore an y instal lation or cable connection to the set, please always make certain th at the system i s turned off and the external power source to the set is removed to prevent electric hazard! Neve r touch any metal pin in the connec tors or circuits to avoid high voltage ha zard or electrost atic discharg[...]

Part 5 CONNECT/DISCONNECT CABLES After removal of the cable cover, the connector area will be accessible then. Please disconnect every cable be fore separation of main unit and the adjustable stand assembly. When later the main unit and stand assembly are to be re-assembled for application , please connect all required cab les to the appropriate co[...]

Part 6 applied when later on the main unit and the stand assembly hav e to be reunited. OPENING STAND ASSEMBLY Take the adjustable stand asse mbly and turn it up side down to show the bottom of the base. No w, unscrew the 2 screws on the cable passa ge cover and take the cable passage cover away to show the cable passage. If there is no need to ins[...]

Part 7 Connect the 6 pole plug of CCBLA-238 to “CR” port and connect each 8 pole plug to the connector m arked “signal ca ble from POS Printer” at the rear of one of the cash drawer. In this way, th e Jiva series is capable of con trolling two cash drawers i ndependent ly through s oftware comm and. ROUTING THE CABLES Place all the cables r[...]

Part 8 required to support th e system real time clock. The jumpers in this window are designated for VGA por t and COM port power supply fu nction. Please consult your dealer for technical support on setup of these jumpers. A new Lithium battery can support the system RTC for abou t 3 years. After the battery is nearly exhaus ted, the user must c [...]

Part 9 Posiflex wireless connection driver elemen ts. The driver can be found together in delivery of the wireless printer or the Posiflex Product Information CD of version 1.9 or above, o r please find it on ou r web http://www.posiflex.com or http://www.posiflex.co m.tw JOINING MAIN UNIT AND STAND Match the matching peg s on the back of the main [...]

Part 10 WALL MOUNTING The major part in the wall mounting kit is a bracket as shown in the picture. Screw the brack et against the wall for mounting the Jiva TP/LT- 5700G / Ji va TP/LT-58 00G in the direction t hat the wi der parts of the matching holes are at the top as shown in the picture below. Align the four matching pegs on the back o f the m[...]

Part 11 the software system on HDD collaps es, it is possible to restore th e operating system onto a physically intact HDD with use of the Recov ery CD that comes with the preloaded operating system. Pl ease follow the instruction from your system integrator for system / so ftware restoration. Follow the instru ctions below for operat ing system r[...]

Part 12 USING THE TOUCH POS APPLICATION ENVIRONMENT It is very importa nt that you check the followi ng operational guidelines: Ventilation This terminal must NOT be operated in an environment with restricted ventilation. The installatio n should be such that there is at least 25mm air clearance around any top or side ventilation holes. The in stal[...]

Part 13 well-maintained battery can be expected to pr ovide adequ ate servic e for 1 year . Battery replacement: In the power management circuit in this POS system, there is a handy battery monitor f eature to help user find out wh en an UPS battery should be replaced. The battery monitor will always first measure and check the UPS battery to see i[...]

Part 14 conditions is summarized in following table: LED Status System Status External Power UPS Battery Powering Up Off Off Off Not present Not possible Off Off Off Present Not allowed Green Off On No influence Allowed Blue On On No influence Not require d Blue/flash On Off Activated Not required Green/rapi d flash On Off Running at low capacity N[...]

Part 15 AUTOMATIC POWER ON There are several ways suppor ted by this system to perform an automatic boot up as long as extern al power is supplied to the syste m. Procedures for each m ethod are described below. By RTC Alarm preset 1. Preset the sys tem to tim ely boot u p by pressin g “Del” key at powering up this system to en ter system BIOS [...]

Part 16 mode dual display fun ction for Win98 or WinXP. To sup port the DC power to these Posiflex monitor, use the DC ad aptor to connect into the monitor or VGA cable or purchase a nother ty pe of VGA ca ble and set an internal j umper in Jiva TP/LT-5700G or Jiva TP/LT-5800G to supp ly the required po wer through the VG A connector. SYSTEM PROTEC[...]

Part 17 Please be solem nly alerted that the system restore operation means the irrecoverable e rasement of exis ting data or sy stem setup, i t is strongly ad vised to press “Esc” key to avoid such miserabl e damage if the re is any doubt. Pressing “F4” key at this screen w ill save the current status of the whole system and the earlier sa[...]

Part 18 SOUND PORTS The audio port on Jiva TP/LT-570 0G / Jiva TP/LT-5800G suppor ts a Microphone in and a lin e out jacks. The internal aud io output port supports line output signals an d requires power amplifier for conn ection to speaker unless the option of aud io amplifier and a pa ir of slim type speakers built in the cable cover area are or[...]

Part 19 Posiflex Touch Terminal Manager A program named “Posi flex Touch Te rm inal Manager” is installed in the preloaded Windows system with a PS/2 interface touch panel controller. This program can also be obta ined by download from the POSIFLEX web site. This program can be en gaged in the progra m group “ Posiflex To ols” and it contro[...]