Precor 300753-201 manual

Oper ating and Maintaining the P20 C onsole Prec or Incorporated 20031 142nd A venue NE P .O . Box 7 202 W oodinville, W A USA 980 72-400 2 P20 Console OM 300 753- 201, en 28 June 2011[...]

[...]

[...]

Edition Informa tion OPERAT ING AND M AINT AININ G TH E P20 CONSO LE P/N 300753 - 201 r ev B Copyright © June 2011 Pre cor Incorporated. All rights reserved. Specifications subject t o change without notice . Trademark Not e Precor, AMT, and EFX are registered trad emarks and Preva i s a trade mark of P recor Inco rporate d. Ot her n ames in t his[...]

Important Sa f ety Instructions This apparatus (hereinafter referred to as the console ) is intended to be shipped with new Precor exercise eq uipment (hereinafter referred to as the base unit). It is not packaged for in div idua l sale. WARNING To prev ent injury, the console must b e attached securely to the base unit following all assembly and i[...]

4 Operating and Mainta ining the P20 Console  Il est conseillé de s ubir un ex amen médical complet avant d’ entreprendre tout programme d ’ exerc ise. Si vous avez d es étourdissements ou de s faiblesses, arrêtez les exerci ces immédiatement.  Do not allow children, or p eople unfamiliar wi th the operation of this equipmen t, on or[...]

Important Safe ty Instructions 5  Proper Location for Equipm ent  For all equip ment other than trea dmills: L ocate at least 40 inches (1 meter) away from w alls or furniture on either side of t he equipment, and 40 inche s (1 meter) away from obj ects behind th e equipment.  For treadmil ls: Locate at l east 40 inches (1 meter) away from[...]

6 Operating and Mainta ining the P20 Console  Use the equipment only for its intended purpose as desc ribed in this manual. Do not us e accessory attachments that are no t recommended by Prec or. Such attachments may cause injur ies.  Do not operate the equ ipment where aerosol (spray) products are being used or where oxygen is being administ[...]

Important Safe ty Instructions 7 In accordance with the European WE EE Directive, electrical and electronic equipment (EEE) is to be c oll ect ed sep ar a tel y and to be reused, recycled, or recovered at end of life. Users of EEE with th e WEEE label per Annex IV of the WEEE Directive must not dispose of end of life EEE as unso rted munic ipa l wa[...]

8 Operating and Mainta ining the P20 Console Opera tion is su bject to the follow in g two conditions: (1) this device may not cause harmful interference, and (2) this device must a ccept any inter ference received, i ncluding interference that may cause undesired operation. WARNING Per FCC rules, changes or modifications not expressly app rov ed b[...]

Important Safe ty Instructions 9 Electrical Recom mendations: 1 20 V and 240 V Treadmills Note: This i s a recomm endation only. NEC (Nat ional Elec tric Code) guide lines or loca l reg ion ele ctr ic codes must be followed. You should have received a powe r cable that meets y our local electrical code requirements along with the equipment. Precor [...]

10 Operating and Maintainin g the P20 Console Electrical Recom mendations: All Equ ipment E xcluding Trea dmills Note: This i s a recomm endation only. NEC (Nat ional Electric Code) guide lines or loca l reg ion ele ctr ic codes must be followed. For equipment fitted with a P80 console or Per sonal Viewing System (PVS) screen a se parate power conn[...]

T able of Cont ents Import ant Safety In structi ons ................................................... 3 Safety Precaut ions ................................................................................. 3 Hazardous Mater ials and Proper Disposal .................................... 6 Product Recyc ling and Disposal ...........................[...]

12 Operating and Maintaining the P20 Console[...]

Chapter 1 Getting St art ed The P20 con sole offers admin istrators and members the abili ty to set defaul ts that meet their specific need s. Activating the Console fo r Sel f - Powered Equipme nt Preco r equipm ent is eith er se lf - powered or externally powered using an optional power adapter. Self - power ed equipment requires the user exercis[...]

14 Operating and Maintaining the P20 Con sole Optional Use of the Power Adapter An optional AC power ada pter provides sustained power to the equipment. This adapt er allows you to change se ttings without having to pedal the e quipment. To purchase the power adapt er, con tact y our dea ler. If you pu rchase th e option al powe r adapte r, you mus[...]

Chapter 2 Setting Up the Console Use the System mode to configure settings in ways th at benefit your users and your facility. The System menu is visi ble on ly to adm inist rat ors a nd re giste red s erv ice technicians. Changes made to these settings are saved to the fitness eq uipment. The system settings are:  Odometer Setting s  Club S [...]

16 Operating and Maintaining the P20 Con sole Identifying Parts of the Console The following diagram pro vides information about the console keys. The number and act ions of the console keys m ay differ slightly depending on the type of equipment. Figure 4 : P20 Console Display Note: Some equipment has both an intensity ( resistance) indicator and [...]

Setting Up the Co nsole 17 Number Part Na me Detai ls Enter k ey Worko ut key Dis plays prese t worko uts Input U p key Us e to na viga te use r men us Input Do wn key Use to navig ate u ser m enus GO key Use to begi n yo ur wor kout Reset key ( Pause/Reset on tre ad c onsole s) Intens ity indic ator Displa ys le vel of re sistanc e. T his w indo w[...]

18 Operating and Maintainin g the P20 Con sole On self - po wered equ ipment, the battery initializes when you begin working out. You mu st maintain a minimum rate of motion for the Welcome banner to appear. PEDA L FAS T ER (or the equivalent message depending on the equipment type) appears in the display when the batte ry i s l ow or wh en the rat[...]

Setting Up the Co nsole 19 Event Log The software is able to detect a variety of events. The event log holds a maximum of 30 events. After the log reaches 30 events, older events are erased to make room for newer ones. Note: There i s a short cut for quick access to the Event Log report. From the Welcome banner, press Reset ( Pause/ Reset on tread [...]

20 Operating and Ma intaining the P20 Console Event Number Description o f Event 22 No m otor p ulse s at s tart up 23 Mo tor pul ses m issi ng a fter st ar t up 24 Reduce speed requested, s peed is not reducing 26 Mo tor p ulse w idth i ncor rec t 27 Too much drive motor curr ent 28 Tem pera ture t oo hig h 29 Exc ess ive AC input c ur rent 30 Com[...]

Setting Up the Co nsole 21 Lower Software Displays the software version (p art number) of the motor drive unit. U- Base Sof tware Displays the software version and pa rt number of the upper unit application software. U-Boot Software Display s the s oftware version and part number of the upper boot l oader software. Usage Log Displays information ab[...]

22 Operating an d Maintaining the P20 Console To view the Club Settings menu: 1. Press the following keys in the order presented. Reset ( Pa use/Res et on tread consoles) Ent er Input Up Enter Programs Enter Input Up Enter Note: O nly two seconds are al lowed between keypresses. If a key is n ot pressed, the c onsole display r eturns to the Welcome[...]

Setting Up the Co nsole 23 Max Resi stance ( Bik e, AMT ) Select th e maximum res istance that a user can program while using the equipment. Max Workout Time Set a maximum workout t ime per session. Choose a time limit between 1 and 90 minutes, or select No L im it i f you do not want to set a w orkout time li mit. Default Workout Time When set to [...]

24 Operating and Mainta ining the P20 C onsole Safety Code (Treadmill) The Safety Code feature prevents use of the treadmill until a password is entered. Select Enable to use this feature and press the following keys in the order presented. Programs Enter Input Down Input Up When the sa fety code is enabled, the display will be in the Welcome state[...]

Setting Up the Co nsole 25 Equipment Valu e D efault Value Value Range Value C hange Increme nts All Unit of measurement U.S. All Model number Depend ent on pr oduct All Tim e meter 0 hour s All Event log 0 entrie s All Odomete r 0 un its All Cool dow n 5 m inute s 1 - 5 minute s 1 minu te All Data entr y inact ivity time out 30 secon ds All Time c[...]

26 Operating an d Maintaining the P20 Console Equipment Valu e D efault Value Value Range Value C hange Increme nts Treadmill Quick Star t course segment 1 minu te Treadmill Max inc li ne 15 percent incline 0 - 15 percent 0.5 percent Treadmill Mi d- se ssio n chang e timeou t 5 seco nds None Climber Steps per minute 30 - 80 5 EFX Max CrossR amp 20 [...]

Chapter 3 Intr oducing Users t o the P20 Console CAUTI ON: Before begin nin g any fitn ess p rogra m, s ee yo ur physi c ian for a thorough physical examination. Seek advice from your physi cian to l earn the t arget hear t rate app ropriate for your fitness level. The P20 console offers an easy - to - fo llow dis play and mult iple programs to hel[...]

28 Oper ating and Mainta ining the P20 C onsole To use the touch heart rat e feature, place the palm o f your hands directly on the meta l heart rate sensors on the equipment ’ s handlebars. To ensure a more accurate heart rate readout, make sure you follow thes e tips:  Both hands must grip the s ensors for your heart rate t o register.  I[...]

Introduci ng Users to the P20 Console 29 Using a Chest Strap Tr ansmitte r WARNING Signals u sed by the C hest S trap Tran smitter (or he art ra te str ap) may i nterfere with pacemakers or other i mplanted devices. Consult your physicia n and the manufa cturers of your Ch est Strap Transmi tter and implanted device before u sing a Chest Str ap Tra[...]

30 Oper ating and Mainta ining the P20 C onsole Using the Trea dmill Safety Clip The tread mill is equip ped with two differ ent stop functi ons, which behave as follows: If the us er … Th en the treadmill belt … And the console … Presse s do wn on the re d STOP b utto n Slows to a s top Shows t hat the exer cise wor k out is paused Pulls on [...]

Introduci ng Users to the P 20 Console 31 If the restar t switc h trips duri ng exerci se, pe r form the following steps: 1. Reattach the safety clip if necessary. 2. Press the r estart switc h down until it click s, returni ng it to its normal position. Note: If th e restar t switch trips , all informati on about the current workout is del eted. 3[...]

32 Oper ating and Mainta ining the P20 C onsole If no user is detected after an additional 30 seconds, t he console displays the message NO USER DETECTED, STOPPING IN 10 SECONDS as not ification of the p endin g stop. During the display of this message, a ten second countdown begins. If a use r does not override the cou ntdown, the belt comes to a [...]

Chapter 4 Starting a W ork out CAUTION: I f you are using a treadmill, be sure to attach the security clip to your clothing befor e starting your workout. The equipment is in the Welcome state when the words PRESS GO OR P ROG RAM S TO ST ART scroll across the scrol ling tex t disp lay are a and the word WELCOME s crolls on the upper text display. P[...]

34 Operating and Mainta ining the P20 C onsole Starting a Preset Programmed Workout Preset workouts are a g reat way to tailor your wor kouts to your fitness goals, stay challenged, and add variety to your sessions. The P2 0 include s the following preset programs:  Manual  Interval 1 -1  Interval 1 -2  Weight Lo ss  Basic H eart Rat[...]

Starting a Workout 35 To enter per sonal data: 1. On the Welcome screen, press Prog rams , then Enter . 2. Press the Input keys to change the defaul t value. 3. Press Enter . The weight input scr een displays. Press the In put keys to change the default value. 4. Press Enter . The age input screen displays. Press the Input keys to change the defaul[...]

36 Operating and Maintain ing the P20 C onsole Paused (Externally Powered Equipment) When you interrupt your workout, the w ords WORKOUT PAUSED - PRESS G O TO CONTINU E scroll across the text dis play. The accumulated metrics (Time, Calories, Distance, and Average Speed) hold the ir current values and do not change. To restart the program, press GO[...]

Starting a Workout 37 Understanding Metrics Three different types of metrics are capture d during a workout. Controlled Metrics Metrics that can be set an d changed are:  Resistance Level (AMT, EFX, bike)  Speed (treadmill)  Incline (treadmill)  Step s/Minu te ( clim ber) Current Perf ormanc e Metric s Metric s that describ e the intens[...]

38 Operating and Mainta ining the P20 C onsole[...]

Chapter 5 Pr ogr ams Preset workouts are a g reat way to tailor your wor kouts to your fitness goals, stay challenged, and add variety to your sessions. In the following figures, the elevated areas show the work expenditure for each preset program. Manual In this program, resistance and speed changes are completely under your control. The p rofile [...]

40 Operating and Mainta ining the P20 C onsole Interv al 1 - 1 and Inter val 1 -2 The Interval programs are primarily for conditioning your cardiovascular system. These programs are designed to raise and lower your heart rate i n a repeating fashion for a user - defined period of time by alternating rest and wor k intervals. Program intensity is ad[...]

Program s 41 Basic Heart Rate Control This program computes yo ur target heart rate based on the calculation, 60% of 220 m inus your age. The e quipment adjusts res istance and/o r incl in e to maintai n your target heart rate while you work out. When a heart rate signal is not received, a heart shape with a question mark appears in the upper text [...]

42 Operating and Maintainin g the P20 Con sole Cross Country The purpose of the preset program is to simulate an outdoor running experience. In this case, you can change the overall profil e or intensi ty of the program (res istance) at a ny time; however, you cannot chan ge the shape of the preset "hills" and "valleys" you see [...]

Chapter 6 Maintenanc e To keep the equipment fun ctioning properly, perform the minor maintenance tasks in t his section at the intervals suggested. Failure to maintain the equipment as described in this secti on could void the Precor Limi ted Warranty. DANGER To reduce the risk o f electrical shock, always disconnect the equ ipment from its power [...]

44 Operating and Maintain ing the P20 C onsole No te s:[...]

[...]

Oper ating and Maintaining the P20 C onsole Prec or Incorporated 20031 142nd A venue NE P .O . Box 7 202 W oodinville, W A USA 980 72-400 2 P20 Console OM 300 753- 201 re v B, en 28 June 2011[...]

As sembling and Maintaining the EFX® 821 Elliptical Fitnes s Cr oss tr ainer ™ Prec or Incorporated 20031 142nd A venue NE P .O . Box 7 202 W oodinville, W A USA 980 72-400 2 EFX 821 P AG/ OM 300 7 63- 101 r ev A 13 January 2011[...]

[...]

As sembling and Maintaining the EFX ‰ 821 Elliptical Fitnes s Cr oss tr ainer ™[...]

Edition Inf ormation ASSEMBLING AND MAINTAINING THE EFX 82 1 ELLIPTICAL FITNESS CROSSTRAINER P/N 300763-101 rev A Copyright ©2011 Precor Incorporated. All rights reserved. Specifications subject to change wi thout notice. Trademark Note Precor, AMT, and E FX are registered tr ademarks an d Preva is a trademark of Precor Incorporated. Other names i[...]

Chapter 1 Important Safe ty Instructions Read the following precautions thoroughly before you begin assembly, and save them afterward for future refere nce. Safety Precautions Always follow basic safety precautions when using this equipment to reduce the chance of injury, fire, or damage. Other sections in this manual provide more details of safety[...]

4 Assembling and Maintaining the EFX 821 Elliptical Fitness Crosstrain er  Never leave the equipment unattended when it is plu gged in. Unplug the equipment from its power source wh en it is not in use, before cleaning it, and before providing authorized service. Note: The optional po wer adapter is considered a power source for self-powered equ[...]

Important Safety Instructions 5  Maintain the equipment to keep it in good working condition, as described in the Maintenance section o f the assembly and maintenanc e guide. Inspect the equipment for incorrect, worn, or loose components, and then correct, replace or tighten prior to use .  If you plan to move the equipment, obtain help and u[...]

6 Assembling and Maintaining the EFX 821 Elliptical Fitness Crosstrain er Educating Users Take time to educate users about the Import ant Safety Instructions found in both the User Reference Manual and Product Owner’s Manual . Explain to your club or facility patrons that they should observe the fo llowing precautions:  Hold onto a stationary [...]

Important Safety Instructions 7 Regulatory Notices for Cardiovascular Exercise Equipment The regulatory information in this section applies to the exercise equipment and its control console. Safety Approvals for Cardiovascular Equipment Precor equipment has been tested and found to comply with the following applicable safety stand ards. Cardiovascu[...]

8 Assembling and Maintaining the EFX 821 Elliptical Fitness Crosstrain er Industry Canada This Class A digital ap paratus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. ATTENTION: Haute Tension Débranchez avan t de réparer European Applications CE compliance is claimed to the fo[...]

Important Safety Instructions 9 The grounding plug on a treadmill or po wer supply looks like the plug shown in one of the following two figures. The power outlet must have the same configuration as the plug. Important: Do not use any power cord adapter with this product. Figure 1: 120-volt, 20-amp power p lug Figure 2: 240-volt, 20-amp power plug [...]

10 Assembling and Maintaining the EFX 821 Elliptical Fitness Crosstrain er[...]

T able of C ont ents Important Safety Instructions .................................................... 3 Safety Prec autions ................................................................................ 3 Educating Users .................................................................................... 6 Hazardous Materials and Proper Disposa[...]

[...]

Chapter 2 As sembling the EFX WARNING You will need the assistance of two other people to assemble this unit. DO NOT attempt assembly by yourself . Important : The instructions in the following procedures are described from the perspective of a person standing directly in front of the e quipment (that is, on the opposite side of the control console[...]

14 Assembling and Maintaining the EFX 821 Elliptical Fitness Crosstrain er  Begin installation of all fasteners by hand, then partially tighten them. Do not fully tighten faste ners until instructed to do so. Important : When wrench-tightening the screws, make sure the head of the fastener is paralle l to the product surface. If it is not, stop [...]

Assembling the EFX 15 Required Tools  Wire tie cutter  Phillips-head screwdriver  Two ⁹⁄₁₆ -inch combination wrenches (open-end and box)  SAE Standard socke t set Hardware Kit (not to scale) Table 1. Hardware Kit Fasteners Quantity Buttonhead screw (1-inch) 14 Washer ( ⁵⁄₁₆ -inch) 20 Socket head cap screw (1¼-inch) 6 Sp[...]

16 Assembling and Maintaining the EFX 821 Elliptical Fitness Crosstrain er Fasteners Quantity Bushings 2 Link arm caps 2 Pivot arm caps 2 Pivot axle covers 2 Upright support covers (packaged separately) 4[...]

Assembling the EFX 17 Assembling the EFX Assemble the EFX in the order presented. Once you have assembled it, clean the ramp with a soft cloth dampened in a diluted solution of mild soap and water. To begin assembl y: 1. Feed the cable through the right upright suppor t. Tape the cable to the top of the upright sup port to secure it temporarily. Im[...]

18 Assembling and Maintaining the EFX 821 Elliptical Fitness Crosstrain er 2. Attach both upright supp orts to the base frame using eight buttonhead screws, eigh t split washers, and ei ght washers. Finger tighten. Figure 4: Attaching the upright supports Installing the Display Console Mount 1. Ask your assistant to hold the display console mount a[...]

Assembling the EFX 19 3. Fasten the display console m ount to each upright support by threading a buttonhead screw, washer, and split washer through opposite m ounting holes. Check that the base fasteners are loose before installi ng the display console fasteners. CAUTION: Make sure the display console mount screws are properly threaded into the in[...]

20 Assembling and Maintaining the EFX 821 Elliptical Fitness Crosstrain er Installing the Bottle Holder The bottle holder attaches to the right stationary arm handrail. To install the bottle holder: 1. Position the water bottle holder as sho wn and attach it to the right stationary handrail. Figure 7: Attaching the w ater bottle 2. Secure the holde[...]

Assembling the EFX 21 Installing the Handlebars CAUTION: Handlebars can sw ing and cause injury. Have your assistant hold the ha ndlebar and gently lo wer it into a vertical position when the handleb ar assembly is complete. To install the moving handlebars: 1. For proper alignment, rotate the pivot arm to a horizontal position. Apply pressure to f[...]

22 Assembling and Maintaining the EFX 821 Elliptical Fitness Crosstrain er 3. Attach the handlebars to the link arms using two he x head screws, two bushings, and four washers. For ease of installation, slide the corresponding foot pedal to the top of the ramp before attaching each handlebar. Important : Install the fasteners in the order shown. Th[...]

Assembling the EFX 23 Attaching the Caps an d Upright Support Cover You will need the arm caps and foot covers to complete the following tasks. To attach the caps and u pright support covers: 1. Align the cut-out inside the link arm cap with the link arm mounting hole. Apply pressure to the cap until it snaps into place. Figure 11: Attaching the li[...]

24 Assembling and Maintaining the EFX 821 Elliptical Fitness Crosstrain er 4. Slide the covers down into the base mount. Secure each pair of covers using two self-tapping screws and a Phillips-head screwdriver. Figure 13: Attaching the pivot axle covers 5. Insert the two pivot axle c overs and press firmly into place. Making Sure the Unit is Stable[...]

Assembling the EFX 25 Verifying that the Heart Ra te Display is Operational To verify that the heart rate display is operational: 1. Hold on to a stationary handrail and step on the foot pedals. 2. When you are comfortably si tuated, begin pedaling. A pedaling speed above 40 strides per minute must be maintained for several seconds. 3. Grasp both t[...]

[...]

Chapter 3 Ins talling the Console To make installation easier, all Precor Experience Series consoles use the same mounting hardware and conn ector locations whenever possible. The installation sequence for any of them is as follows:  Threading the cable asse mbly  Connecting cables  Completing the installation (tightening the mounting scre[...]

28 Assembling and Maintaining the EFX 821 Elliptical Fitness Crosstrain er Threading the Cable Assembly Earlier in the installation, you threaded the necessary cables through the frame of the base unit and out the passthrough opening in the console mount. As you li ne up the back plate on the console with the console mount, you must make sure that [...]

Installing the Console 29 Connecting Cables After the console has been seated, separate the individual cables out of the end of the cable asse mbly and attach them to the appropriate circuit connectors inside the console. Refer to the following diagram and table to id entify the cables and connectors. Figure 14: Cable connections , P20 console Tabl[...]

30 Assembling and Maintaining the EFX 821 Elliptical Fitness Cros strainer Completing the Console Installation Before you complete the final installation steps, double-check the connections you have made. Make sure that all cables are fully and securely connected, and that any unneeded cables are tied back properly. Note: During these steps, you wi[...]

Chapter 4 Self-Po w er ed F eatur es On self-powered equipment, the system initializes and displays the Welcome screen when a user starts exercising. A minimum rate of motion must be maintained for the banner to appear, as shown in the following table. When a person meets the requirements, the power th at is generated allows the equipment to functi[...]

32 Assembling and Maintaining the EFX 821 Elliptical Fitness Cros strainer Informational Displays Prior to Shutdown The equipment saves its battery charge by moving into a shutdown mode. If the user does not maintain the minimum rate of motion, a 30-second shutdown process begins. In this mode, the console displays a countdown indicator and ignores[...]

Self-Powered Features 33 Using the Optional Power Adapter After connecting the power adap ter to the equipment, plug the opposite end into the appropriate power source (120 V or 240 V). CAUTION: When the optional powe r adapter is in use, make sure that the power supply cord does not create a safety hazard. Keep it out of the way of traffic and mo [...]

34 Assembling and Maintaining the EFX 821 Elliptical Fitness Cros strainer Replacing the Battery The equipment’s battery is built to last for a long time. However, if you feel that the battery may need replacing, check with an authorized service technician. Refer to Obtaining Service . CAUTION: The battery stored in side the equipment contains ha[...]

Chapter 5 Maint enanc e To keep the equipment functioning properly, perform the minor maintenance tasks in this section at the intervals shown on the maintenance checklis t. Failure to maintain the equipment as described in this section could void the Precor Limited Warranty. DANGER To reduce the risk of electrical shock, always disconnect the equi[...]

36 Assembling and Maintaining the EFX 821 Elliptical Fitness Crosstrainer CAUTION: Read and follow the manufacturer’s instructions, particularly dilution instructions, before using any clean er on Precor fitness equipmen t. Do not use concentr ated cleaners at full strength, or acidic cleaners of an y kind; s uch cleaners weaken the protective fi[...]

Maintenance 37 7. Verify that th e unit sits squarely on the floor. All of its feet should be touching the floor and the unit should not rock or wobble when in use. If not, re-level it as described in. Monthly Maintenance DANGER USE EXTREME CAUTION when the rear cover of any EFX is removed. Serious injury could result if fingers are pinched between[...]

38 Assembling and Maintaining the EFX 821 Elliptical Fitness Crosstrain er Storing the Chest Strap If you purchased the optional heart rate chest strap, store it in a place where it remains free of du st and dirt (for example, in a closet or drawer). Be sure to protect the chest strap from extremes in temperature. Do not store it in a pl ace that m[...]

Chapter 6 C ommer cial Cardio v ascular Equipment Limit ed W a rr anty PLEASE READ THESE WARRANTY TERMS AND CONDITIONS CARE FULLY BEFORE USING YOUR PRECOR INCORPORATED PROD UCT. BY USING THE EQUIPMENT, YOU ARE CONSENTING TO BE BOUND BY THE FOLLOWING W ARRANTY TERMS AND CONDITIONS. Limited Warranty. Precor Incorporated warrants a ll new Precor produ[...]

40 Assembling and Maintaining the EFX 821 Elliptical Fitness Crosstrain er Options / Accessories Many options or accessories have components that are connected internally or mounted inside the electronic console. The following guidelines deter mine the warranty for these components. If the internal components are inst alled by the factory or by an [...]

Commercial Cardiovascular Equipment Limited Warranty 41 This Limited Warranty sha ll not apply to: 1. Software version upgrades. 2. Software defects that do not materially an d negatively affect the normal performance of the product under norma l conditions of use. 3. Consumable goods or cosmetic items of the product, the exterior of which has been[...]

42 Assembling and Maintaining the EFX 821 Elliptical Fitness Crosstrainer EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL DAMAGES. PRECOR AND/OR ITS SUPPLIERS SHALL HA VE NO OBLIGATION OR LIABILITY, WHETHER ARISING IN CONT RACT (INCLUDING WARRANTY), TORT (INCLUDI NG ACTIVE, PASSIVE, OR IMPUTED NEGLIGENCE AND STRIC T LIABILITY), OR OTHERWISE, FOR DAMAGE T[...]

Notes 43[...]

44 Assembling and Maintaining the EFX 821 Elliptical Fitness Crosstrain er[...]

[...]

As sembling and Maintaining the EFX® 821 Elliptical Fitnes s Cr oss tr ainer ™ Prec or Incorporated 20031 142nd A venue NE P .O . Box 7 202 W oodinville, W A USA 980 72-400 2 EFX 821 P AG/ OM 300 7 63- 101 r ev A 13 January 2011[...]