Radio Shack 43-1122 manual

43-1122 Owner’s Manual Please read before us in g this e q uipment. D 900MHz Cordless Telephone with Call Waiting/Caller ID[...]

2 Important Information ˆ Important Information This telephone has been tested and found to comply with all appli cable UL and FCC standards. We have designed your 900MHz Cordless Phone with Call Waiti ng/Caller ID to conform to federal regulations, and you ca n connect it to most telephone lines. However, each device, such as a telephone or answe[...]

3 Important Information you can take the necessary steps to prevent interruption of your telephone service. LIGHTNING Your telephone has built-i n protection circuits to reduce the risk o f damage from surge s in telephone line an d power line current. The se protection circuits meet or e xceed the FCC requirements. However, lightning strikin g the[...]

4 Important Information may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Never spill liquid of any kind on the product. 16. T o reduce the risk of electric shock, do not disassemble this p roduct. T a ke it to a qualified service techn ician when service or repair work is required. Opening[...]

5 Contents ˆ Contents Important Informatio n ............. .............. .............. .............. .............. ................. .............. ..... .. 2 Features ........... .............. .............. .............. .............. .............. ................. .............. ...... ........ .... 6 Installation ....... .............[...]

6 Features ˆ Features Thank you for p urchasing the Radio Shack 900 MHz Cordless Telepho ne. Your phone uses advanced technology to give you superior audio qual ity an d extended range. The phone’s Caller ID unit records ea ch caller’s telephone number (and name, if available in your area) a nd the date and time of the call, as provided by you[...]

7 Installation ˆ Installation SELECTING A LOCATION You can place the phone’ s base on a desk or table, or mount it on a standard wall plate or directly on a wall. Select a location that is: • near an acce ssible AC outlet • near a telephone line jack • out of the way of normal activities • away from electrical machinery , electrical appl[...]

8 Installation 3. Route the adapter and modular cords through the grooves on the bottom of the base. 4. Plug the short modular cord into the wall plate jack, then align the base’s keyhole slots with the wall plate studs and slide the base down to secure it. 5. Plug the adapter into a standard AC outlet. 6. Push up on the handset holder , then lif[...]

9 Installation about 5 seconds to reset the security access-protection code. • If the base loses power for about an hour while the handset is away from it, the security acce ss-protection code might be lost. T o reset the co de, return the handset to the base for about 5 seconds. The handset does lose its security access-protection code if the ba[...]

10 Installation Note: If your phone system requires that you dial an access code (9, for example) before you dial an outside number , do not dial the access code eithe r . If the dial tone stops, you have touch- tone service. If the dial tone continue s, you have pulse service. 3. Press TA L K . To set the dialing mode, hold dow n FLASH until the p[...]

11 Operation such an area, do not store the area code. Follow these steps to store your area code. 1. Lift the handset and hold down CALL ID until the menu appea rs with 7kje 7kje 7kje 7kje JW ba JW ba JW b a JW ba selected. 2. Press 3 or 9 9 9 9 to move the cursor to 7h[Wý 7h[Wý 7h[Wý 7h[Wý 9eZ[0 9eZ[0 9eZ[0 9eZ[0 . 3. Press SELECT , then ente[...]

12 Operation ADJUSTING THE HANDSET’ S V OLUME To adjust the vo lume of the sound you hear through the handset during a call, press 8 8 8 8 or 9 9 9 9 on the hand set unti l you obtain the desired volume level. Le b k c [ Le b kc [ Le b kc [ Le b kc [ CWn_ckc CWn_ckc CWn_ckc CWn_ckc , Leb k c [ Leb k c [ Leb k c [ Leb k c [ >_]^ >_]^ >_]^[...]

13 Operation Notes: • Connecting a headset disconnects the handset’s earpiece and microphone. • 8 8 8 8 or 9 9 9 9 on the handset also controls the headset’s volume. • If you place the handset on the base to recharge it while the headset is connected, be sure the h andset seats properly . • With a headset connected, you can make or answ[...]

14 Operation 7. Enter the number and any tone and pause entries (see “Using T one Services on a Pulse Line” on Page 12 and “Entering a Pause”). Note: Each tone or pa use entry uses one digit of memory . 8. Press SELECT . The phon e beeps and C[ceho C[ceho C[ceho C[ceho d d d d Ijeh[Z Ijeh[Z Ijeh[Z Ijeh[Z appears ( d d d d = number). After a[...]

15 Caller ID Operation activates), then press the desired memory location number. Chain-Dialing Service Numbers For quick reca ll of numbers for spe cial services (such as bank-by-phone), store each group of numbers in its own memory location. Dial the service’s main numb er first. T hen, at the appropriate place in the call, press MEM and enter [...]

16 Caller ID Operation name (if available), and the third line shows the caller’s p hone number. Caller ID Messages ADDING/DELETING THE AREA CODE The display shows the area code of an incoming call, unless the call come s from the area code you stored (see “Storing Your Area Code” on Page 10). You can add th e area code to the disp lay or del[...]

17 Caller ID Operation 3. Choose a memory lo cati on ( 1 – 0 ) by pressing a number or by repeatedly pressing 8 8 8 8 or 9 9 9 9 , then press SELECT . If the selected locati on is empty , the phone beeps to confirm that it stored the number , then the Caller ID record appears. If a record exists in the selected location, H[fbWY[ H[fbWY[ H[fbWY[ H[...]

18 Troubleshooting ˆ T roubleshooting We do not expect yo u to have any problems with your phone, but if you do, these suggestio ns might help. Problem Suggestions The phone does not work or works poorly . Be sure the base’s phone line cord and AC adapter are correctly and securely connected. Be sure the battery pack in the handset is connected [...]

19 Troubleshooting If you still have problems, disconnect the phone. If other phones on th e same line work properly, the fault is in this phone or its installation. If you cannot find the problem, take the phone to your l ocal RadioShack store for a ssistance. CARE Keep the phone dry; if it gets wet, wi pe it dry immediately. Use and store the pho[...]

43-1122 UCZZ01346BZ 10A01 Printed in China D RadioShack Corporation Fort Worth, Texas 76102 Limited One-Y ear W arranty This product is warranted by RadioShack against manufactu ring defects in material and workman- ship under normal use for one (1 ) year from t he da te of pu rchase from Radi oSha ck compan y- owned stores and authorized RadioShac[...]