Raymarine DSM300 manual

DSM300 & DSM30 Digital Sounder Module Installation Manual Document number: 87080-1 Date: November 2 006[...]

T rademarks and r egistered trademarks HSB , Raymarine and SeaT alk are registe red trademarks of Raym arine plc. All other product n ames ar e trademarks or r egister ed trademarks of their respective owners . Contents of this handboo k ©Raymari ne 2006[...]

3 Contents T ra demarks and registered trade marks ...... ................ ................ ...... 2 Important Information ............ ........... ........... .............. ........... ............... ........... .... 5 Intended Use . ................ ............. ............. ................ ............ ................ ... 5 Safety Notices [...]

4 DSM300 and DSM30 In stallation Manual 2.4 How to Contact Raymarine ......... ................ ................ ............. ............. 28 On the Internet ............ ............... ............. ................ ............. ................ 28 Customer Support ................ ................ ................ ............. ............. [...]

5 Important Information Raymarine DSM300 and DSM30 Digital Soun der Modules provide ech o sounder data that can be displayed on Raymarine E Se ries , C Series , and hsb 2 PLUS (P athfinder) Series d isplay units . T his manual contains im portant information for installing and m aintaining your Digital Sounder Module. Raymarine’ s T echnical Serv[...]

6 DSM300 and DSM30 In stallation Manual EMC Conformance All Raymarine equip ment and accessori es are designed to the best industry standards for use in the recr eational marine environment. T he design and ma nufacture of Raymarine equi pment and accessories conform to the appropriate Electromag netic Compatibility (EMC) standards , but correct in[...]

7 Chapter 1: DSM Installation 1.1 Intr oduction T his chapter provides details for mounting th e DSM300 and DSM 30 and connecting to the display . F or the system to display depth, w ater temperature and speed, you mu st install the transducer type(s) capable of transmitting the ap propriat e data. Planning the Installation Before you install your [...]

8 DSM300 and DSM30 In stallation Manual • T he equipment is supplied fr om a separa te battery from that used for engine start. V oltage drops bel ow 10 V and st arter motor t ransients can cause the equipment to reset. T his will not damage th e equipment, but may cause the loss of some informa- tion and may ch ange the operat ing mode. • Raym[...]

Chapter 1: DSM Installation 9 1.2 Unpacking and Inspecting the Components Unpack your system carefu lly , to prevent dama ge to the equipment. Save the carton and packing, in case you need to retu rn the unit for service . Check that you have all the correct system components: Power Cable, 3m part no. R69053 Mounting Screws, No.8 (x4) D9598-1 DSM30[...]

10 DSM300 and DSM30 In stallation Manual A 3m-long cable is i ncluded for conn ecting your soun der module to a C Seri es or hsb 2 PLUS (P athfinder) Series display . Lo nger cabl es and connection cables for other types of systems must be purchased separately . Note: C Series displays have 4-pin connec tors while the older hsb 2 PLUS Series displa[...]

Chapter 1: DSM Installation 11 • Interference: T he selected lo cation shoul d be far enou gh aw ay from devices tha t may cause interf erence , such as motors , generators , and radio transmitter/receivers . (See the EMC gu id elines e arlier in this chap ter .) • Magnetic compass: Mount the unit at least 3 ft (1 m) away from a magnetic compas[...]

12 DSM300 and DSM30 In stallation Manual T o mount the DSM: 1. Hold the modul e in the l ocation wh ere you w ant to moun t it, makin g sure it is perpendicular to the deck. 2. Mark the location of the four k ey holes onto th e mounting surfac e . 3. Drill a 9/64" pilot hole at eac h o f t he mar k ed l oca ti ons . V ertical x4 D7479-1 V erti[...]

Chapter 1: DSM Installation 13 Note: For fiberglass with a gelcoat surface, you should overdrill the surface to prevent the gelcoat from chippi ng when driving in t he screw. Before drilling the p ilot hole, hand drill the marked location with an o versized bit and countersink to approximat ely 3/8" diame- ter. 4. Drive the supplied #8 screws [...]

14 DSM300 and DSM30 In stallation Manual 1.5 Cable Runs Consider t he followi ng before installing the system cables: • Y ou will need to attach power , transducer , and display cables. • All cables should be adeq uately secu red, protected from physica l damage , and protected from exposure to heat. • Avoid running cables throug h bilges or [...]

Chapter 1: DSM Installation 15 T ransducer Connection A 30 ft (10 m) cable is su pplied with the transducer . T his cable has a connector plug (with an outer nut that you must att ach) at one end for attaching to the “T/D” connector o n the sound er module. Optional extension cables are a vailable . CAUTION: Do Not Cut or Splice the T ransducer[...]

16 DSM300 and DSM30 In stallation Manual Th e r e i s n o p o w e r s w i t c h o n t h e D S M . T h e unit turn s on when the power cord is attached t o boat’ s power and plug ged into the POWER conn ector on th e connector panel. Note: You should locate the D SM so that the power cord can be easily removed , if necessary. If the sounder is pl [...]

Chapter 1: DSM Installation 17 P ower Connections with a C Series Display P ower Connections with an hsb 2 PLUS Series Display D9601-1 Transducer Sounder Module C Series Display Unit P o wer Supply D9602-1 Transducer Sounder Module hsb PLUS Series Display Unit P o wer Supply 2[...]

18 DSM300 and DSM30 In stallation Manual Ground Connection It is important that an effective RF groun d is connected to the system. A single ground point sh ould be used for all eq uipment. Y ou can ground the sounder module by connecting the drain wir e (shield) of th e P ower Input cab le to the boat’ s RF ground. If you need to e xtend the wir[...]

Chapter 1: DSM Installation 19 When used in a multiple display system, connect the DSM to the S eaT a lk hs Network Switch. Configuring an E Serie s System - Multiple Displays Configuring C Series Displays T h e C Series system uses cables with a round 4-pi n twist-lock network connector . A 3m-long C Series cabl e is included with your soun der mo[...]

20 DSM300 and DSM30 In stallation Manual Configuring hsb 2 PLUS (P athfinder) Series Displays hsb 2 PLUS network cables have a tr iangular 3-p in connector on both ends. When using the DSM with an hsb 2 PLUS Seri es display , connect the supplied 4-pin to 3-pin hsb 2 adapter between the so under modul e and the net work cable. Th e h s b 2 system m[...]

Chapter 2: Maintenance and Problem Solving 21 Chapter 2: Maintenance and Pr oblem Solving T his chapter provides inform ation on routine maintenance an d on possible c auses of problems you may experie nce with your Digital Sounder Module. 2.1 Maintenan ce CAUTION: The sounder unit contains high voltage. Adjustments r equir e specialized service pr[...]

22 DSM300 and DSM30 In stallation Manual Use only a w ater -based antifoul ing pain t, or a w ater -based paint specifically designed for t ransducers . Apply the pa int with a b rush. If your transducer becomes fouled or stops working beca use of sand or sea growth, u se a stiff bru sh to clean i t. Y ou may sand the su rface with a fine-gri t wet[...]

Chapter 2: Maintenance and Problem Solving 23 2.2 Resetting the System T h e Reset function returns t he sounder modu le to its factory default values . How you perform the reset depen ds on the ty pe o f display the sounder module is connected to . CAUTION: F actory Reset The factory reset clears the sonar depth offset and speed and temperatur e c[...]

24 DSM300 and DSM30 In stallation Manual iii. An a udible alarm is sounde d. iv . The normal sonar image resum es scrolling across the displa y . T he reset is complete. ➤ T o cancel the reset: Before pressing Y ES as described in item 4 above, press any of the following ke y s : DISPLA Y , MUL TI , VRM/EBL , MARKS , RANGE , GAIN , o r ALARMS . T[...]

Chapter 2: Maintenance and Problem Solving 25 2.3 Pro blem Solving All Raymarine products are, prior to packing and shipping, subjected to comprehensiv e test and qua lity assurance prog rams . However , if this uni t should develop a fault, please refer to the foll owing table to ident ify the most lik ely cause and the corrective actio n required[...]

26 DSM300 and DSM30 In stallation Manual Status LED T he LED on the connector panel provid es valuable information on the status of your sounder module . T he LED bli nks green while the module is op erating normally . If the un it detect s a problem , the LED blink s amber t o indicat e a w arning or red for a n error . The number of times the LED[...]

Chapter 2: Maintenance and Problem Solving 27 A solid red LED (not blinki ng) indicates a fatal error c ondition. If the event of a fatal error , the system will power cycle to attempt to self-correct the condition. If the c ondition persists , please contact Raymarine Customer Service. T able 2-3: Status LED Error Indications Color No of blinks Me[...]

28 DSM300 and DSM30 In stallation Manual 2.4 How to Contact Raymarine On the Internet Visit the Raymarine World Wide Web site for the latest information on Raymarine electronic equipment and sy stems at: www .raymarine .com Customer Support Navigate to the Customer Support page for lin ks to: • F inding F actory Service loca tions and Authorized [...]

Chapter 2: Maintenance and Problem Solving 29 T echnical Support F or technical support, call: 1-800-539-5539 ext. 2 444, or 1-603-881-5200 ext. 2444. Our T ec hnical Support Specialists are available to answer questions about installin g, opera ting and t rouble-shoot ing all Raymarin e products . Questions can be sent directly to our T echnical S[...]

30 DSM300 and DSM30 In stallation Manual In Europe In Europe , Raymarine support, serv ice and accessories may be obtained from your authorized dealer , or contact: Raymarine plc Anchorage P ark P o rtsmouth, Hampshire England PO3 5TD T el:+44 (0) 23 9269 36 11 F ax:+44 (0) 23 9269 4642 T echnica l Support T he T echnica l Services Department handl[...]

Appendix: Specifications 31 Appendix: Specifications General Sounder Features Approvals: CE - conform to 2004/108/EC (EMC), EN60945:2002 Size: 10.76" x 7.37" x 2.43" (273.3 x 18 7.2 x 61.7 mm) Weight: 2.2 lbs (1.0 kg) Mounting: F our k eyholed mounting tabs , mounting screws Po w e r : Vo l t a g e : DSM300: DSM30: Current: Fuse: Rev[...]

32 DSM300 and DSM30 Installation Manual[...]

33 Index A Accessories 10 C C Series displays Connections 17 , 19 Cable Runs 10, 14 Cleaning Instructions 21 Configuration 18 Connections 14 C Series displays 17 , 19 Display 14 E Series displays 16 , 18 Ground 18 hsb2 19 , 20 hsb2 PLUS Series displays 17 , 20 Po w e r 14 , 15 SeaT a lk hs 14 , 18 System 14 Tr a n s d u c e r 14 , 15 Crossover Coup[...]

34 DSM300 and DSM30 In stallation Manual Tr a n s d u c e r Cleaning 21 Connections 14 , 15 W W arning cod es 26 W arranty 6[...]