Roberts CR2002 manual

CR2002 3 band Auto set PLL Synthesised Clock Radio Please read this manual before use ROBER TS Sound for Generations[...]

Controls ........................................................................... 2-4 Display ............................................................................... 5 Automatic clock setting ...................................................... 6 MSF radio signal ................................................................ 7 Manual[...]

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 2 Controls 1. Time/Date and Alarm set button 2. Preset memories and Alarm days buttons 3. Tuning Up/Down and Snooze button 4. Waveband and Alarm mode button 5. Time capsule (Top) 2 13 4 5[...]

3 Controls (Front) 6. Date button 7. Time button 8. Alarm 2 button 9. Alarm 1 button 10. Headphone socket (on end) 9 8 7 6 12 13 14 15 16 11. Volume control (on end) 12. On/Off and sleep button 13. Nap button 14. Display button 15. Light button 16. LCD display 11 10[...]

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 4 Controls (Base) 15. Time zone switch 16. Reset button 17. Alarm sound level control (buzzer alarm only) 15 16 17[...]

5 C B A OM L K J I H F E A. Waveband and clock AM/PM display B. Time set indicator C. Summer time indicator D. Alarm indicators E. Sleep indicator F. Nap indicator G. Date indicator D H. Day of week indicators I. Month, date, year and alarm time indicators J. MSF indicator K. Auto tuning indicator L. Memory and seconds indicator M. Minute indicator[...]

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 6 Automatic clock setting 1. Place your radio on a flat surface and connect the mains plug to a wall socket and switch on the wall socket. Your clock radio will display -:-- and the MSF indicator will flash in the display. The MSF signal level will also[...]

7 Automatic clock setting 5. After approximately 3 minutes your clock radio will synchronise to the official UK standard time signal transmitter (MSF) located at Rugby in the U.K. The MSF indicator will stop flashing and the correct time and date will appear in the display. Once synchronised to the radio time signal your clock radio will automatica[...]

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 8 Manual clock setting (only if automatic setting fails) 1. Press the Time button , display will flash . 2. Press the Set button , the hour digits will flash in the display. 3. Press the up or down button to adjust the hours. The LCD clock uses a 12 hou[...]

9 Setting the date (only if automatic setting fails) 1. Press the Date button , DATE will flash in the LCD display. 2. Press the Set button , Year will flash in the LCD display. 3. Press the up or down button to adjust the year. 4. Press the Set button , Month will flash in the LCD display. 5. Press the up or down button to adjust the month. 6. Pre[...]

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 10 Operating the radio Your clock radio is equipped with three tuning methods:- Scan tuning, Manual tuning and Memory preset tuning. When switched-on your clock radio will display the waveband and frequency in use. Scan tuning 1. Press the On/Off button[...]

11 Manual tuning 1. Press the On/Off button to switch on your radio. 2. Select the required waveband by repeatedly pressing the Band button . On the FM waveband fully extend the Wire aerial located on the rear of your clock radio - for MW and LW rotate your clock radio for best reception. 3. A single press on either the up or down button will chang[...]

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 12 Presetting stations There are 7 memory presets for each of the 3 wavebands. 1. Press the On/Off button to switch on the radio. 2. Tune to the required station using one of the methods previously described. 3. Press and hold down the required Preset b[...]

13 Recalling a preset station 1. Press the On/Off button to turn on the radio. 2. Select the required waveband by repeatedly pressing the Band button. 3. Momentarily press the required Preset button , the preset number and station frequency will appear in the display. 3 1 2[...]

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 14 Alarms Your clock radio is equipped with two alarms which can be operated independently of each other. Each of the alarms can be set so that you wake to either the radio or buzzer alarms. The alarms can be set with the radio switched On or Off. Setti[...]

15 Setting alarms to wake to radio (continued) 6. Press the Day of week buttons to select required days of week on which the alarm will sound. Display will shows day of week on which alarm will sound e.g. 7. Repeatedly press and release Mode button until the radio alarm symbol or appears in the display. 8. Press the Alarm 1 or Alarm 2 buttons to co[...]

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 16 Setting alarms to wake to buzzer A beep tone will sound when using the buzzer alarm. The alarm beep will increase in volume every 15 seconds for one minute followed by one minutes silence before repeating the cycle. The buzzer alarm will sound for on[...]

17 1 1 Setting alarms to wake to buzzer (continued) 6. Press the Day of week buttons to select required days of week on which the alarm will sound. Display will shows day of week on which alarm will sound e.g. 7. Repeatedly press and release Mode button until the buzzer alarm symbol or appears in the display. 8. Press the Alarm 1 or Alarm 2 to conf[...]

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 18 Alarm sound level control 1. With the aid of a small screwdriver the alarm sound level on both radio and buzzer alarms can be adjusted using the Alarm sound level control located on the underside of your clock radio. Nap timer 1. The Nap timer is a s[...]

19 Display button 1. When the radio is switched on you can change between station frequency and normal time display by pressing the Display button . 1 Display back light 1. The display backlight can be switched on or off by pressing the button . 1 Sleep timer The sleep timer will automatically switch off your clock radio after a preset time has ela[...]

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 20 Time zone switch The Time zone switch is used to provide offsets of -1 to + 2 hours relative to GMT (UTC). This facility would only be used if your clock radio is used in another country that is within range of the UK time signal transmitter e.g. Fra[...]

21 Specifications Power Requirements Mains AC 230 volts, 50Hz only Frequency Coverage FM 87.5-108MHz MW 522- 1629kHz LW 153- 279kHz Loudspeaker 75mm x 100mm 8ohms Output Power 800 mW Headphone socket 3.5mm dia Aerial System FM Wire aerial MW Built-in Ferrite aerial LW Built-in Ferrite aerial Troubleshooting 1. If the time does not set automatically[...]

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 22 The wire coloured BLUE must be connected to the terminal marked N or coloured BLACK. The wire coloured BROWN must be connected to the terminal marked L or coloured RED. Fuse This apparatus must be protected by a 3A fuse (BS1362) in a 13A plug (BS1363[...]

Issue 1 ROBERTS RADIO TECHNICAL SERVICES 97-99 Worton Road Isleworth Middlesex TW7 6EG Technical Helpline :- 020 8758 0338 (Mon-Fri during office hours) Guarantee This instrument is guaranteed for twelve months from the date of delivery to the original owner against failure due to faulty workmanship or component breakdown, subject to the procedure [...]