Runco High Definition manual

O WNER ’ S O PERATING M ANUAL XP-50DHD / XP-50DHDxa XP-65DHD / XP-65DHDxa XP-103DHD High Definition, 1080p Flat Panel Plasma Display with and Digital High Definition TM Controller with Vivix II TM Technology TM[...]

[...]

PlasmaWall XP Series Owner’s Operatin g Manual iii PRE L IMINAR Y THREE YEAR LIMITED WARRANTY For Plasma Displays Congratulation s on your pu rchase of a Ru nco video product and welcome to the Runco fam ily! We believe Ru nco produ ces “The World’s Fine st Home Thea ter Products.” With proper installa tion, setup and care, you s hould enjo[...]

iv PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y MOREOVER, DAMAGE RESULTING DIRECTLY OR INDIRECT LY FROM IMPROPER INSTALLATION OR SETUP IS SPECIFICALLY EXCLUDED FROM COVERAGE UNDER THIS LIMITE D WARRANTY. IT IS IMPERATIVE THAT INSTALLATION AND SETUP WORK BE PERFORMED ONLY BY AN AUTHOR IZED RUNCO DEALER TO PROTECT YOUR RIGHTS UNDER [...]

PlasmaWall XP Series Owner’s Operating Ma nual v PRE L IMINAR Y To locate th e name and address of th e nearest Runc o Authorized Se rvice Center, o r for additiona l information ab out this Limited Warran ty, please call or w rite: RUNCO INTERNA TIONAL, INC. Attn: Customer Service Dep artment 2900 Faber St reet Union City , CA 94587 Ph: (510) 32[...]

vi PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y Thank you for your purchase of this quality Runco product! It has been desig ned to provide you with the quality of video that i s expected in a home the ater. This manu al is your guide through the m enus and ope ration. For the best perf ormance, ple ase read it caref ully and keep[...]

PlasmaWall XP Series Owner’s Operating Ma nual vii PRE L IMINAR Y Manufacture r’s Name: Runc o Internation al, a subsidiar y of Planar System s, Inc. Manufacture r’s Address: 290 0 Faber Stre et, Union City, CA 94587 hereby declare s that the p roducts Mode l Numbers: XP-50DHD, XP-50DHDxa, XP-65DHD, XP-65DHDxa, XP-103DHD conform with th e pro[...]

viii PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y NOTE: This equipment ha s been tested and found to comply with the limits for a Class B digi tal device, p ursuant to Par t 15 of the FCC Rules. T hese limits ar e designed to p rovide reason able protection against harmf ul interference in a residential installation. This equipmen[...]

PlasmaWall XP Series Owner’s Operating Ma nual ix 1 Table of Content s PRE L IMINAR Y THREE YEAR LIMITED WARRANTY ............... ................ ................ ................ .............. iii Important S afety In s truction s .......................... ............. ................ ............. ................ .... vi Compliance Inform[...]

x PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y Other Cons iderations ........... ................. ............ ................. ............ ............. .......... 21 Connections t o the PlasmaWall and DHD Controller ................... ................ ................ 22 Connecting th e PlasmaWall to the DHD C ontroller ... [...]

PlasmaWall XP Series Owner’s Operating Ma nual xi 1 Li s t of Figure s PRE L IMINAR Y 2-1. PlasmaWall XP-50 DHD Front-Pane l Controls and Ind icators ......................... ............... 5 2-2. PlasmaWall XP-65 DHD Front-Pane l Controls and Ind icators ......................... ............... 5 2-3. PlasmaWall XP-10 3DHD Front -Panel Contro[...]

List of Figures xii PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y Note s :[...]

PlasmaWall XP Series Owner’s Operating Ma nual 1 PRE L IMINAR Y 1.1 About This Manual This Owner’s Manu al describes how to install, set up and operate a Run co PlasmaWall XP Series Flat-Panel Plasm a Display Monitor and DHD Controller (Mod el XP-50DHD, XP-50DHDxa, XP-65DHD, XP-6 5DHDxa or XP-103DHD). Throughout th is manual, the Run co PlasmaW[...]

Introduc tion 2 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y G raphic Convention s : These symbols appear in numerous p laces throug hout the manual, to emp hasize points th at you must k eep in mind to avoid problem s with your equipment o r injury: 1.2 Using This Manual Use the following ta ble to locate the spec if ic informati[...]

Introd uction PlasmaWall XP Series Owner’s Operating Ma nual 3 PRE L IMINAR Y 1.3 Description, Features and Benefits The PlasmaWa ll XP Series F lat-Panel Plasma Displ ay Monitor and DHD Controller establish a highe r threshold for flat panel display products. T he PlasmaWall XP Seri es is available in three sizes, including our largest and highe[...]

Introduc tion 4 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y Parts List Your PlasmaWall is shipped with the follow ing items. If any items are m issing or da maged, please contact y our Runco de aler or Runco C ustomer Service a t (800) 23-RUNCO . • PlasmaWall XP Seri es Flat-Panel Plasm a Display Monitor and DHD Controller • [...]

PlasmaWall XP Series Owner’s Operating Ma nual 5 PRE L IMINAR Y 2.1 PlasmaWall at a Glance Controls and Indicators Figure 2-1, Fig ure 2-2 an d Figure 2-3 show the Pla smaWall fro nt-panel contr ols and indicators. Figure 2-1. Pla s maWall XP-50DHD Front-Pan el Control s and Indicator s Figure 2-2. Pla s maWall XP-65DHD Front-Pan el Control s and[...]

Controls and Functions 6 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y Figure 2-3. Pla s maWa ll XP-103DHD Front-Pa nel Control s and Indica tor s 1. DI S PLA Y S TA N D Optional accessory for table-top installations. 2. POWER BUTTON Connects or disc onnects th e display pan el from the AC power sourc e. 3. S T ANDBY/ON INDICA TOR [...]

Controls and Functi ons PlasmaWall XP Series Owner’s Operating Ma nual 7 PRE L IMINAR Y Connectors Figure 2-4 sho ws the rear-pane l connector lo cations on the PlasmaWall. Figure 2-4. Pla s maWall Rear Panel SERIAL PC IN AUDIO SLOT1 SLOT3 P R /C R /R P B /C B /B Y/G AUDIO RL COMPONENT/RGB IN SLOT2 AV IN AB XP-50DHD 1 2 3 4 5 6 XP-65DHD XP-103DHD[...]

Controls and Functions 8 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y 1. S LOT 1 Not used. 2. S LOT 2 (DVI-D or Dual HDMI input) HDCP-complian t digi tal video input(s). Connect the HDMI ou tput from th e DHD Controller to thi s input. If S LOT 2 is equipped wi th an Dual HDMI input board, co nnect the HDM I output from the DHD Co[...]

Controls and Functi ons PlasmaWall XP Series Owner’s Operating Ma nual 9 PRE L IMINAR Y 4. V A CUUM FLUOR E S CENT DI S PLA Y Can be used instead of the On-Screen Displ ay (OSD). Displays curre ntly-selected menu or – if no menu is selecte d – the curr ent source, signa l format (NTS C or PAL) and aspect ratio. 5. UP BUTTON Used to direct sel[...]

Controls and Functions 10 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y 2.3 DHD Controller Rear Panel Figure 2-6 show s the rear conn ector panel on th e DHD Controller . Figure 2-6. DHD Controller Rear Panel Outputs 1. HDMI OUT Connect this t o the S LOT 2 input on the Pla smaWall (see Figure 2-4 ). Inputs 2. HDMI 1 / HDMI 2 (Digi[...]

Controls and Functi ons PlasmaWall XP Series Owner’s Operating Manual 11 PRE L IMINAR Y 8. ComLink (R S -232) OUTPUT Connect this to the ComLink (RS-23 2) input on t he projector, u sing the prov ided communication cable. 9. IR Wired input from a wired remote con trol or infrared re ceiver. It is a 3.5-m m, mini phono jack, wired as follows: Ring[...]

Controls and Functions 12 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y 2.4 DHD Controller Remote Control Figure 2-7 sho ws the DHD Co ntroller re mote contro l, and the pa ragraphs th at follow describe its fun ctionality. Figure 2-7. DHD Controller Remote Co ntrol CUST 1 THX SVC HDMI 1 HDMI 2 EXIT RETURN 16 : 9 4 : 3 (not availab[...]

Controls and Functi ons PlasmaWall XP Series Owner’s Operating Manual 13 PRE L IMINAR Y 1. IR OUTPUT INDICA TOR Lights when a button is pre ssed to indic ate that an IR signal is bein g transmitt ed. 2. ON / OFF Press to turn the Pla smaWall on or off. 3. ENTER Press to select a highlighte d menu item or co nfirm a change d setting. 4. Cur s or K[...]

Controls and Functions 14 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y 10. A s pect Ratio S election Button s Use the red but tons to select an aspect ra tio directly or t o enter num eric characters, as follows: 16 : 9 (3) For viewing 16:9 DVDs or HDT V programs in their n ative aspect ra tio. 4 : 3 (6) Scales the input signal to[...]

PlasmaWall XP Series Owner’s Operating Manual 15 PRE L IMINAR Y 3.1 Remote Control To install batteries in the remote co ntrol: 1. Press down the tab on the cover and pull the cove r in the dire ction of the arrow. 2. Insert th e included batte ries. Ensure that the polaritie s correctly match the and markings in side the ba ttery compartm ent. 3[...]

Installation 16 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y • Do not drop the remote control or expose it to moisture or hig h temperatu re. • The remote contr ol may malfunctio n under a fluoresc ent lamp. If that occur s, move the plasma display away f rom the fluoresc ent lamp. • Make sure th at there is nothing obstr uc[...]

Installation PlasmaWall XP Series Owner’s Operating Manual 17 PRE L IMINAR Y 3.2 Quick Setup Table 3-1 gives a quick ove rview of the PlasmaWa ll installation process . The sections following this one pr ovid e detailed ins tructions. Installation shou ld be performed by a quali fied custom video installation specialist. Table 3-1. In s tallation[...]

Installation 18 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y 3.3 Installation Considerations Proper installation of your PlasmaWall will ensure the highest possi ble picture quality. Whether you a re installi ng the PlasmaWall temporarily or permanen tly, you shou ld take the following into account to ensure tha t it performs opti[...]

Installation PlasmaWall XP Series Owner’s Operating Manual 19 PRE L IMINAR Y You can attac h your optional m ounts or sta nd to the PlasmaW all in either of two ways: • While it is upright. • As it lies flat with the scree n face down. Place the pr otective sheet, which was wr apped aro und the plasma monitor when it was packaged, b etween th[...]

Installation 20 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y Figure 3-2. Ventila tion Requirement s for Enclo s ure Mounting (XP-50DHD and XP-65DHD) Figure 3-3. Ventila tion Requirement s for Enclo s ure Mounting (XP-103DHD) 50 mm (2") 50 mm (2") 50 mm (2") W all W all 50 mm (2") 50 mm (2") 300mm (11.8&quo[...]

Installation PlasmaWall XP Series Owner’s Operating Manual 21 PRE L IMINAR Y Other Considerations Here are some other co nsiderations and tip s that can help improve yo ur installation, avoid damage and prolo ng operating life: • Keep the ambi ent temperature constant and belo w 35°C (95°F). Keep the display away from heating an d/or air cond[...]

Installation 22 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y 3.4 Connections to the PlasmaWall and DHD Controller Proceed as follo ws to connect the PlasmaWall to t he DHD Controller , your video sourc es, external cont roller(s) – if present – and AC pow er. When connec ting your equipm ent: • Turn off all equip ment before[...]

Installation PlasmaWall XP Series Owner’s Operating Manual 23 PRE L IMINAR Y Figure 3-5. Connect ing the Pla s maWall (DVI Ver s ion) to the DHD Controller Pb Pr Y Video 3 IR RS-232 Control S-Video 1 S-Video 2 HD1 HD2 1 2 R/Pr G/Y B/Pb R/Pr G/Y B/Pb H V HDMI 1 HDMI 2 HDMI Out HV TRIGGERS RS-232 Out CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, D[...]

Installation 24 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y Digital Video Connection: The PlasmaWall has a dua l HDMI input board, la beled HDMI ( S LOT 2) . Connect the HDMI output from the DHD Controller to inpu t “A” on this board , using an HDMI-to-HDMI cable. Some PlasmaWall XP Series mod els have a DVI input board (labe[...]

Installation PlasmaWall XP Series Owner’s Operating Manual 25 PRE L IMINAR Y Connecting Source Components to the DHD Controller Connect your vid eo sources to t he DHD Controller a s shown and d escribed in th e sections that follow. HDMI Connection s : See Figu re 3-7. Figure 3-7. HDMI S ource Connection s Use the HDMI input s whenever po ssible[...]

Installation 26 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y Digital (DTV) R G B Connection s : See Fig ure 3-8. Figure 3-8. Digital (DTV) R G B Connection s HD1 HD2 G/Y INPUTS HV R/Pr B/Pb G/Y H V R/Pr B/Pb Component Video Pb Pr Y Video S-Video 2 S-Video 1 12 3 TRIGGERS HDMI 1 HDMI 2 DTV or Progressive Component (YPbPr) Source Re[...]

Installation PlasmaWall XP Series Owner’s Operating Manual 27 PRE L IMINAR Y Analog (Computer) R G B Connec tion s : See Figure 3-9. Figure 3-9. Analog R G B Connec tion s 1. Refer to Plasm aWall Specifications on page 61 for a list of computer signal s compatible w ith the PlasmaWall. U se with signals other th an those listed m ay cause some fu[...]

Installation 28 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y Compo s ite/ S -Video/Component Video Co nnection s : See Figure 3-10. Figure 3-10. Co mpo s ite, S -Video and Component Video Con nection s HD1 HD2 G/Y INPUTS HV R/Pr B/Pb G/Y H V R/Pr B/Pb Component Video Pb Pr Y Video S-Video 2 S-Video 1 12 3 TRIGGERS HDMI 1 HDMI 2 DV[...]

Installation PlasmaWall XP Series Owner’s Operating Manual 29 PRE L IMINAR Y RS-232 Controller Connection Use a standard , 9-pin RS-232 cable to connec t a PC or home th eater cont rol/automat ion system (if present) to the RS-232 Control port on the DHD Controller; see Figure 3-11 . For more in formation ab out using this c onnection, re fer to [...]

Installation 30 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y Connecting an External IR Receiver to the DHD Controller If infrared sign als from the r emote control cannot reach the DHD Contr oller due to excessive d istance or ob structions s uch as walls or c abinet door s, you can connect an external IR rec eiver to the DHD Cont[...]

Installation PlasmaWall XP Series Owner’s Operating Manual 31 PRE L IMINAR Y Connecting AC Power Plug the female end of the p ower cord into the AC recep tacle on the r ear of the PlasmaWall. Connect t he other end t o your AC power source. (The X P-103DHD requires 200-240 VAC.) Figure 3-14. AC Power Connection Similarly connect the DHD Controlle[...]

Installation 32 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y Cable Management To reduce ca ble clutt er, use the c able clamps pr ovided with th e PlasmaWall to bundle the video, audio an d control cables at the back of the di splay. Install the c lamps as shown in Figure 3-15 . Figure 3-15. Cable Man agement ➤ 1 3 2 1 2 Using C[...]

PlasmaWall XP Series Owner’s Operating Manual 33 PRE L IMINAR Y 4.1 Turning on the Power 1. Turn on your source co mponents. 2. Press the main power s witch on the Pla smaWall (see Figure 2-1 , Figure 2-2 or Figure 2-3 ). The st andby/on ind icator lights gr een. 3. Set the main power swit ch at the rear of the DHD Controller (s ee Figure 2-6 ) t[...]

Operation 34 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y 2. Double c lick on th e Di s play icon. 3. Click the S etting s tab on the display dial og box. 4. Set the S cr een are a to 1024x768 pixels. 5. Click the Advanced button and click the Monitor tab on the dia log box. Set th e Refre s h Fr equency to 60Hz and click OK . 1. [...]

Operation PlasmaWall XP Series Owner’s Operating Manual 35 PRE L IMINAR Y 4.3 Using the DHD Controller Menus Press the MENU button on either the rem ote control or the DHD Contr oller front panel to display the Main Me nu. To select a me nu item, use the UP ( ) and DOWN ( ) buttons on either the remote cont rol or the DHD Co ntroller front panel [...]

Operation 36 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y Figure 4-1. DHD Co ntroller O S D Menu S tructure for Pla s maWall S ervice Test Vide o Grey Bars 1 Grey Bars 2 Color Bars 1 Color Bars 2 Input Names Rename, Restor e or Save Remote Control Primary Secondar y Display Device Display Position Left/Right , Up/Down, W idth, He [...]

Operation PlasmaWall XP Series Owner’s Operating Manual 37 PRE L IMINAR Y Main Menu The Main Me nu is the startin g point for accessing all di splay functions. (The Calibration and Service m enus are hidd en and not accessible un til you enter a passcode.) Input Source From the M ain Menu, selec t Input Sou rce to choo se a video signa l source. [...]

Operation 38 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y Table 4-1. A s pect Ratio S etting s A s pect Ratio Remote Control Key De s cription 16:9 16:9 Select 1 6:9 to vi ew 16:9 D VDs and HDTV programs in their native aspec t ratio. 4:3 images are stretched hori - zontally to fit a 16:9 screen. 4:3 4:3 4:3 scales the input signa[...]

Operation PlasmaWall XP Series Owner’s Operating Manual 39 PRE L IMINAR Y Picture Use the contro ls in the Picture Me nu to calibrate the analog inputs on the PlasmaWall for optimum picture qu ality. The PlasmaWall has be en designed to incorporate set up and calibra tion standards establishe d by the Imaging Science Foundation (ISF ). The ISF ha[...]

Operation 40 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y PLUGE patterns v ary but gene rally consist of some comb ination of b lack, white an d gray areas against a bla ck background . The example above include s two vertical bars and four shaded boxes. Select Brightness fro m the Picture men u and press ENTER . Adjust the bright[...]

Operation PlasmaWall XP Series Owner’s Operating Manual 41 PRE L IMINAR Y Color S aturation: On your external tes t pattern source , select a c olor bar patter n like the one shown in Figure 4-4 . Figure 4-4. Typical Color Bar Pattern for Adju s ting Color S aturation and Tint Select Color and press ENTER . While looking at the color bar pattern [...]

Operation 42 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y S harpne ss : “Sharpness” is th e amount of high-frequen cy detail in the ima ge. To ad just sharpness, select Shar pness from the Pictur e menu and press ENTER . On your external test pattern source, sele ct a patte rn like the one shown in Figure 4-5 . Adjust as neede[...]

Operation PlasmaWall XP Series Owner’s Operating Manual 43 PRE L IMINAR Y Over s can: Image Overscan push es the outsid e edge of the ac tive picture ar ea of the video signal out beyond the edge of the display area. Some television programs ar e produced b ased on th e assumption tha t older tele vision sets may not d isplay the ou ter edge s of[...]

Operation 44 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y Calibration Use the Calibration men u to perform advance d picture quality adjust ments on the analog inputs. Thi s menu s hould be u s ed by I S F-certif ied technician s only . To recall the ISF N ight or ISF Day se ttings, se lect “ISF Night” or “ISF Day” from th[...]

Operation PlasmaWall XP Series Owner’s Operating Manual 45 PRE L IMINAR Y I S F Night - Input Color: The Input Color controls are simila r to those in the Display Color menu (see above ), but adjust th e color balance at the DHD Controller (as opposed to the display device). The se settings are also saved inde pendently for ea ch input. • G ain[...]

Operation 46 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y • Runco/I S F Logo S pla s h S cr een Timer s : When you turn on the Plasma Wall, it projects a welco me screen with the Runco lo go followed by o ne with the ISF lo go. Select Splash Timer from the Splash Configure men u to set the a mount of time that these two im ages [...]

Operation PlasmaWall XP Series Owner’s Operating Manual 47 PRE L IMINAR Y Remote Control: The Remote Control menu sh ows you the p rimary and second ary infrared (IR) code s to which the DHD Controller w ill respond. By default, bot h are set to 17. You can chang e these codes if either: • Another device in the thea ter (a DVD player , for exam[...]

Operation 48 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y Di s play Devi ce: The option s in the Display Device menu allow you to perfor m certain adjustments a t the plasma d isplay. • Di s play Po s ition: Select Display Position from the Display De vice menu to per form the following disp lay device adjustm ents (these a re g[...]

Operation PlasmaWall XP Series Owner’s Operating Manual 49 PRE L IMINAR Y HD Format: If the characteristic s of the inco ming signal on the HD1 or HD2 inputs are known, select HD Fo rmat from the Servic e menu and set th em as described below. Doing so can reduce the time it take s the DHD Contr oller to switch from HD to 480i sign als or vice ve[...]

Operation 50 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y S y s tem Re s et: To reset ALL DHD Controller settings (including image settings ) back to their factory defaul ts, choose System Reset from the Servic e menu. A confirmation messa ge appears, remindin g yo u to save your setting s before you per form the reset, so that yo[...]

PlasmaWall XP Series Owner’s Operating Manual 51 PRE L IMINAR Y 5.1 Cleaning Regular cleaning will extend the life and performan ce of the Plasm aWall. Before c leaning, be sure to u nplug the p ower cord from the po wer outlet. Cleaning the Display Panel Body and Rem ote Control Do not under any circumsta nces use solven ts such as b enzene or t[...]

Maintenance and Troublesh ooting 52 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y 5.2 Troubleshooting Tips Table 5-1 provide s some general guideline s for troubleshootin g problems you may encounter w ith the Plasma Wall. If the sugge sted solutions fa il to resolve t he problem or if you encounter an issue not d escribed here , p[...]

Maintenance and Troubleshooting PlasmaWall XP Series Owner’s Operating Manual 53 PRE L IMINAR Y RGB-HD images appear “noisy.” • Clock and Phase settings need adjustment. • Adjust Cl ock and Phas e settings (refer to ISF Night - Input Color on page 45 ). Computer images do not dis - play correctly. • The resolution and frequency of the v[...]

Maintenance and Troublesh ooting 54 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y Note s :[...]

PlasmaWall XP Series Owner’s Operating Manual 55 PRE L IMINAR Y 6.1 RS-232 Connection and Port Configuration To interface the PlasmaWall with a home th eater automation/contr ol system or a PC running te rminal emula tion software, connect it to the RS-2 32 output of the DHD Controller as show n in Figure 3- 5 . Connect your cont rol system or PC[...]

Serial Communications 56 PlasmaWall XP Series Owner’s Operating Manual P RELI M INARY Table 6-1 lists the RS-232 comm and set. The “Par ameter (min /max)” column shows the valid parameter ranges, or “NA” for comm ands that take no para meters. When you enter a valid comma nd, the DHD Controller execute s it and acknowledges it with a plus[...]

Serial Communications PlasmaWall XP Series Owner’s Operating Manual 57 PRE L IMINAR Y Picture Adju s t Command s (not available on HDMI 1 or HDMI 2 input s ) BRIGHTNESS -100/100 YES Sets a value for brightness BRIGHTNESS? NA NA Returns brightness setting value CHROMADELAY -12/12 YES Sets a value for input color chroma delay CHROMADELAY? NA NA Re [...]

Serial Communications 58 PlasmaWall XP Series Owner’s Operating Manual P RELI M INARY Input Po s ition Command s (not available on HDMI 1 or HDMI 2 input s ) IHEIGHT -100/100 YES Sets the value for input height IHEIGHT? NA NA Returns input height value IHPOS -100/100 YES Sets a value for hori zontal input position IHPOS? NA NA Returns input h ori[...]

Serial Communications PlasmaWall XP Series Owner’s Operating Manual 59 PRE L IMINAR Y Mi s cellaneou s Command s (not available on HDMI 1 or HDMI 2 input s ) BKGND -100/100 YES Sets the background color for 4:3 aspect ratio (-100 = black; 100 = white) BKGND? NA NA Returns background setting value DATE? NA NA Returns product manu facture date HDIN[...]

Serial Communications 60 PlasmaWall XP Series Owner’s Operating Manual P RELI M INARY The following serial commands a re meant to emul ate buttons on the remote contro l or DHD Con - troller front panel. Each button has its own serial command, so effe ctively it is as if you were using the IR remote only you’ll be doing so via se rial commands.[...]

PlasmaWall XP Series Owner’s Operating Manual 61 PRE L IMINAR Y 7.1 PlasmaWall Specifications Table 7-1 lists the Plas maWall specifications. 7. S pecification s Table 7-1. Pla s maWall S pecification s Native Re s olution: 1920 x 1080 S creen S ize: XP-50DHD / XP-50DHD x a: 43.50 in. W x 24.50 in. H (1104.9 x 622.3 mm) 50 in. (1270.0 mm) diagona[...]

Specifications 62 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y 7.2 DHD Controller Specifications Table 7-2 lists the DHD Controller specifications. Limited Warranty: Three (3) years parts and labor from the date of delivery to the end user (except for plasma glass panel). Plasma Glass Panel: One (1) ye ar parts and labor from the [...]

Specifications PlasmaWall XP Series Owner’s Operating Manual 63 PRE L IMINAR Y 7.3 PlasmaWall Dimensions Figure 7-1, Fig ure 7-2 and Figure 7 -3 show the PlasmaWall dim ensions (all dime nsions are in inches). Figure 7-1. Pla s maWall Model XP-50DHD Dimen s ion s (with Optional Table S tand) 30.000 50.420 34.000 8.122 4.566 3.490 15.500 0 8.481 1[...]

Specifications 64 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y Figure 7-2. Pla s maWall Model XP-65DHD Dimen s ion s (with Optio nal Table S tand) 0 1.7 2.5 35.0 37.5 1.1 18.7 0 7.4 8.8 10.0 31.2 62.3 59.8 2.5 65.4 17.0 7.0 4.5 2.1 4.1 5.6 4.5 2.1 0 1.7 12.0 25.1 30.4 37.5 9.0 0 10.3 52.3 43.0 18.5 62.3 2.3 60.0[...]

Specifications PlasmaWall XP Series Owner’s Operating Manual 65 PRE L IMINAR Y Figure 7-3. Pla s maWall Model XP-103DHD Dimen s ion s (with Floor S tand) 102.500 87.875 96.125 89.375 50.750 59.500 40.000 5.375 21.500 12.625 11.875 69.000 5.250 33.000 16.625 0.375[...]

Specifications 66 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y 7.4 Supported Timings Table 7-3 lists the s ignal types supp orted by eac h input on th e DHD Controller. Table 7-3. S upported S ignal Timin g s by Input Format Re s olution Refre s h Rate (Hz) Horizontal Frequency (kHz) Pi x el Frequency (MHz) S upported? ( √ = Ye [...]

Specifications PlasmaWall XP Series Owner’s Operating Manual 67 PRE L IMINAR Y PAL-B/G – 50.00 15.625 4.430 √ – √ √ √ PAL-M – 59.94/60.00 15.73 4/15.750 3.580 √ – √ √ √ PAL-N – 50.00 15.625 3.580 √ – √ √ √ PAL-60 – 59.94/60.00 15.734/15.750 4.430 √ – √ √ √ Table 7-3. S upported S ignal Timin g s by [...]

Specifications 68 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y Note s :[...]

[...]

Runco CL-810 Owner ’s Operating Manual Runco International • 2900 Faber S treet • Union City , CA 94587 • Ph (510) 324-7777 / (800) 23RUNCO / Fax (510) 324-9300 www .runco.com SERIAL NUMBER 020-0726-00 re v. A (RUMA-009825) November 2007[...]