Russound ST2-XM2 manual

800.967.2346 2[...]

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER - SERVICEABLE P ARTS INSIDE. REFER SERVICING TO QUALIFIED SER VICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to a[...]

T ABLE OF CONTENTS Pr oduct Introduction ..........................................................................................................4-5 Component Guide ST2-XM2 Front Panel ...........................................................................................................6 ST2-XM2 Rear Panel ...................................[...]

4 INTRODUCTION DESCRIPTION Thank you for choosing the Russound ST2-XM2 Dual Smart T uner . Whether you are adding satel- lite radio to an existing system, expanding a CAi Series system or taking advantage of the CAV6.6’ s robust RNET ® communication link, the ST2-XM2 T uner is designed to meet your needs. The ST2-XM2 T uner doubles your satellit[...]

5 INTRODUCTION Before using the ST2-XM2 tuner with the CAV6.6 or CAM6.6, you must assign sour ce numbers to T uner 1 and 2 in the ST2 Setup Menu AND complete the CAV6.6 and CAM6.6’ s Source Setup pr ocedure to identi- fy the tuner as a “Peripheral“ device and assign Source Numbers. The CA V6.6 requir es firmware version 2.00.01 or higher to c[...]

6 COMPONENT GUIDE ST2-XM2 FRONT P ANEL XM1 XM2 XM1 64 : The Groove 64 : The Groove XM2 MAIN POWER SWITCH - T urns power on and off POWER ON/OFF LED - Indicates power on or off REMOVABLE COVER LENS - Covers the selection buttons on the tuner BANK SELECT BUTTON - Selects bank 1-6 MEMORY SELECT BUTTONS - Sets and selects memory pr esets 1-6 for each b[...]

7 RS-232 INTERFACE I N O UT NEWMARKET, NH U.S.A. ST2 Smart Tuner LINK K EYP AD P ORTS Serial# MADE IN KOREA T UNER 1 IR LR A UDIO O UTPUT IR LR A UDIO O UTPUT T UNER 2 A NTENNA A NTENNA 12VDC 1.25A RNET LINK IN/LINK OUT - Links to other Russound components that are RNET compatible, displays frequency and other information on the UNO keypads RS-232 [...]

8 TUNE TUNE FAV 1 SEEK ST/ MONO LOC/ DX SEEK TUNE TUNER 1 TUNER 2 4 M E M B A N K 123 56 789 0 PWR MEM TUNE AM/FM FAV 2 OK POWER - Puts the tuner in/out of standby mode TUNER CONTROL - Select TUNER 1 (XM1) or TUNER 2 (XM2) and all subsequent button press- es affect that tuner NUMERIC INPUT - Number buttons for direct selection of channel, bank, pre[...]

9 ST2-XM2 SETUP AND CONNECTIONS BASIC CONNECTIONS Power T o power the tuner , connect the 12VDC external power supply by inserting the power supply jack into the power supply connection on the tuner’ s rear panel. Audio Output Connect one end of a dual RCA audio cable to the T uner 1 Audio Output connection. Keep prop- er channel identity . Attac[...]

10 ST2 T uner CA V6.6 UNO-S2 keypads RCA Cable 64:The Groove 45:XM Cafe 1.25A Source Connections with CA V6.6 Contr oller/Amplifier (RNET System) The diagram depicts a typical setup using the ST2-XM2 T uner with a CAV6.6 amplifier . Each tuner in the ST2 unit must be connected as a separate source for audio inputs. UNO-S2 keypads ar e connect- ed t[...]

ST2-XM2 SETUP AND CONNECTIONS CAi SERIES AND ST2-KP CONNECTIONS RS-232 INTERFACE 12VDC 1.25A I N O UT NEWMARKET, NH U.S.A. ST2 Smart Tuner LINK K EYPAD P ORTS Serial# MADE IN KOREA T UNER 1 IR LR A UDIO O UTPUT IR LR A UDIO O UTPUT T UNER 2 A NTENNA 1 R L 2 1 R L 2 34 CA6.4i NEWMARKET , NH U.S.A. ~110VAC ~220-240VAC ~50-60Hz 400W VOLTAGE 110V 220-2[...]

12 ST2-XM2 SETUP AND CONNECTIONS ANTENNA CONNECTIONS A NTENNA ST2-XM2 T uner 12VDC 1.25A XM Antenna Connect the included XM antenna for XM recep- tion to the back panel of the XM module. The antenna comes with 20 feet of cable. If this length is not sufficient, there ar e aftermarket antenna kits available for custom lengths. Position the antenna n[...]

13 XM Radio Activation XM Radio is over 100 channels of radio broadcasts with the signal deliver ed by satellite and (depend- ing on location) transferred by terr estrial antennas. The radio is a subscription-based service with a monthly provider fee and an activation char ge. XM radio broadcasts several channels for preview but will not broadcast [...]

14 ST2-XM2 OPERA TION XM RADIO MODES XM Radio Modes There ar e four user “modes” for selecting music and viewing music information on the XM T uner: Preset (default or normal) Category Search Now Playing Display Prefer ences . These modes are accessed thr ough cer tain button and key presses fr om the tuner panel, remote controls and keypads. W[...]

15 ST2-XM2 OPERA TION XM RADIO MODES ST2-XM ST2-RC ST2-KP UNO-S2 UNO-S1 UNO-LRC1 Preset Mode Next Preset MEM Previous Pr eset MEM Next Bank Hold Hold Hold Previous Bank Hold Hold Hold Channel Up TUNE Hold Channel Down TUNE Hold Preset (default) Mode This is the normal operating mode of the XM tuner . In this mode the XM tuner operates similarly to [...]

16 Category Search Mode ( 1 1 . . C C A A T T S S E E A A R R C C H H ) XM Radio is or ganized by Channel Category (e.g., Rock, Country, News ). W ithin each category is a series of channels (e.g., T op T racks, Bluegrass Junction, XM Classics). Channel selection in this mode is refined to scr olling only those channels in the selected category . N[...]

17 ST2-XM ST2-RC ST2-KP UNO-S2 UNO-S1 UNO-LRC1 Display Prefer ence Mode OK Next Display Prefer ence TUNE MEM MEM Previous Display Prefer ence TUNE MEM MEM ST2-XM2 OPERA TION XM RADIO MODES Now Playing Mode ( 2 2 . . N N O O W W P P L L A A Y Y N N G G ) This mode displays information about the current XM selection. Appr opriate button presses acces[...]

18 Fr ont Panel Operation T urning the unit on T o turn the unit on, push the On/Off button up on the front panel. Pushing the On/Off button down turns the tuner off. Selecting the desired tuner From the fr ont panel, use to toggle between the XM tuners. A backlight shows behind the selected label XM1 (green) or XM2 (amber) to indicate the active t[...]

19 ST2-XM2 OPERA TION ST2-RC REMOTE CONTROL ST2-RC Remote Contr ol Operation The ST2-RC remote contr ol is the only means of remote operation of the ST2-XM2 in a non--RNET sys- tem. The ST2-XM2 front panel displays information for the tuner that is receiving commands fr om the ST2- RC. However , the ST2-RC commands do not change which tuner is play[...]

20 ST2-XM2 OPERA TION ST2-KP KEYP AD CONTROLS ST2-KP Keypad Operation T urning the keypad on/of f T o activate the ST2-KP , press . Press to power down the keypad display . The keypad remains powered until the ST2-XM2 T uner is turned off. Selecting the desired tuner T o select a different tuner , press and hold . (If the keypad has been hardwar e [...]

21 ST2-XM2 OPERA TION UNO-S2 KEYP AD CONTROLS WITH CAV6.6/CAM6.6 CA V6.6-UNO-S2 Keypad Operation NOTE: T o control the ST2 T uner through the UNO-S2 keypad, the tuner must be configured as a source using the CA V6.6/CAM6.6 program- ming steps. T urning the unit on The tuner is power managed by the CAV6.6 or other RNET -enabled controller . If the t[...]

22 ST2-XM2 OPERA TION UNO-S2 KEYP AD CONTROLS WITH CAV6.6/CAM6.6 TUNER SELECTION - Select source number assigned to TUNER 1 (XM1) or TUNER 2 (XM2) TUNE UP/DOWN - Used for manual channel selection SELECT - XM Operating mode toggle SEEK - (press) Exit curr ent XM mode SCAN - (press and hold) XM Signal Strength mode toggle MUTE - Mutes/unmutes tuner a[...]

23 UNO-LRC1 Remote Contr ol Operation T urning the unit on The tuner is power managed by the CAV6.6 or other RNET -enabled controller . If the tuner is in standby mode, any button press of the UNO- LRC1 will bring the tuner out of standby mode when used with the UNO keypad. Selecting the desired tuner T o select a tuner , push and choose the source[...]

24 ST2-XM2 OPERA TION UNO-LRC1 REMOTE CONTROL WITH CA V6.6/CAM6.6 POWER - Power managed by CAV6.6/CAM6.6 NUMERIC INPUT - Number buttons for direct input of frequency , channel, preset, bank ENTER - XM Operating mode toggle TUNE UP/DOWN - Incrementally scr olls through channels EXIT - Exit XM operating mode TUNE UP/DOWN - Incrementally scr olls thro[...]

ST2-XM2 T uner Setup Menus Note: The Setup Menu procedur es must be per formed from the ST2-XM2 T uner front panel. The ST2-XM2 T uner Setup Menus provide setup and naming pr ocedures for the ST2-XM2 main chas- sis and the XM tuner modules. These procedur es include source number assignments, assigning a custom name to a memory preset or a bank, fa[...]

26 ST2-XM2 TUNER PROGRAMMING ST2 TUNER SETUP MENU Update Firmware (Chassis) The Update Firmware pr ocedure allows the ST2 tuner’ s OS firmware to be updated. The pr oce- dure is performed using a DB9 serial cable with one end connected to the RS-232 port on the back of the tuner and the other connected to a PC or laptop. If an OS firmware update [...]

27 ST2-XM2 TUNER PROGRAMMING ST2 TUNER SETUP MENU TNR SEL Press and Hold TNR SEL button ST2 Chassis Setup Proc edures TNR SEL TNR SEL This Procedure returns the ST2 T uner to its F actor y settings SOURCE NUM Procedure F ACT OR Y INIT Procedure UPD A TE FIRMW Procedure SYSTEM INFO Procedure HOLD BAND After update cycle P ower Star t Update Cycle P [...]

T uner Setup Menu for XM Memory Name A memory preset must be created and saved before it can be named (see page 18). Once it is saved, the preset’ s T uner #, Bank # and Memory # must be entered in the following pr ocedure. 1. Enter the Setup Menu by pressing and holding the TNR SEL button. Press TNR SEL button to select XM T uner BANK # MEMOR Y [...]

29 ST2-XM2 TUNER PROGRAMMING ST2 TUNER SETUP MENU 2. TUNER SETUP appears. Press BAND again. 3. MEMORY NAME appears on the tuner . 4. Press BAND. 5. Bank # appears. 6. Press the T une Up/Down buttons to select the Bank #. 7. Press BAND to advance. Memory # appears. 8. Press the T une Up/Down buttons to select a Memory #. 9. Press BAND to advance. ME[...]

30 ST2-XM2 TUNER PROGRAMMING ST2 TUNER SETUP MENU Bank Name A custom name can be assigned to each of the six banks of T uner 1 (XM). 1. Enter the Setup Menu by pressing and holding the TNR SEL button. 2. TUNER SETUP appears. Press BAND. 3. MEMORY NAME appears. Pr ess MEM Up/Down until BANK NAME appears on the tuner . 4. Press BAND. 5. Bank # appear[...]

31 ST2-XM2 TUNER PROGRAMMING ST2 TUNER SETUP MENU Press TNR SEL button to select XM T uner XM Setup Menu C ontroller , Diagnostics, F actor y Initialization and Sy stem Info Proc edures TNR SEL TNR SEL MEM NAME Procedure TNR SEL BANK NAME Procedure XM Setup Menu F ACT ORY INIT Procedure CONTROLLR ID Procedure SYSTEM INFO Procedure DIAGNOSTICS Proce[...]

32 NOTE: The CAV6.6 firmwar e must be version 2.00.01 or higher , and UNO-S2 firmwar e must be version 3.00.01 or higher to control the ST2-XM2 T uner . Use the System Info Menu of the CAV6.6 to check the firmwar e version. If the firmware is not the pr oper revision as noted her e, visit the Document Center at www .russound.com to obtain the lates[...]

NOTE: The CAM6.6 firmwar e must be version 1.00.11 or higher and UNO-S1 firmwar e must be version 1.00.21 or higher to control the ST2-XM2 T uner . Use the System Info Menu of the CAM6.6 to check the firmwar e version. If the firmwar e is not the proper r evision as noted here, visit the Document Center at www .russound.com to obtain the latest ver[...]

34 ST2-XM2 Smart T uner Dimensions: 17"W x 8"D x 1.8"H (43 x 20.3 x 4.4 cm) Weight: 7 lbs. (3.2kg) Power Supply: 12VDC 1.25A XM Band: 2332.5 - 2345 MHz XM Antenna: 50-ohm SMB connection TECHNICAL SPECIFICA TIONS It is prohibited to copy , decompile, disassemble, reverse engineer , or manipulate any technology incorporated in receiver[...]

35 WARRANTY & REP AIR The Russound ST2-XM2 is fully guaranteed against all defects in materials and workmanship for two (2) years from the date of pur chase. During this period, Russound will replace any defective parts and correct any defect in workmanship without char ge for either par ts or labor . For this warranty to apply , the unit must [...]

Russound 5 Forbes Road, Newmarket, NH 03857 tel 603.659.5170 • fax 603.659.5388 e-mail: tech@russound.com www .russound.com E. & O.E. Copyright © 2005 Russound ® All rights reserved. All trademarks are pr operty of their respective owners. 28-1170 03/23/05 2[...]