Sakar 92045 manual

- 1 - 92045 Digital Camera Owner’s Manual © 2007 Sakar International, Inc. All rights reserved. Windows and the Windows logo are registered trademarks of Microsoft Corporation. All other trademarks are the property of their respective companies.[...]

- 2 - Table of Contents What your camera includes: ..................................................................................... 3 Computer System Requiremen ts ............................................................................. 3 A Quick Look at Y our Came ra .......................................................................[...]

- 3 - What your camera includes:  Digital Camera  Spider-Man Photo Lab software and driver installation CD  USB cable  User’s Manual  Strap Computer System Requirements To be able to download photos to your PC y ou will need the following minimum configuration:  Windows 2000/XP  Pentium-based PC (or equivalent)  200 MB har[...]

- 4 - A Quick Look at Your Camera[...]

- 5 - Preparing Your Camera for Use Face Plate Disassembly You can use the opener to disassemble the face plate from the camera.[...]

- 6 - Battery Installation Your camera requires three AAA alkaline ba tteries, which must be inserted as follows: 1. Open the battery compartment on the back of the camera. 2. Insert the batteries in accordance with the polarity (+/-) shown in the battery compartment. 3. Close the battery compartment. The LCD will flash if your batteries are runnin[...]

- 7 - • Opening the battery compartment and/or removing the battery will erase the photos currently stored in the camera. • Download your photos as often as possibl e. Photos ma y be lost when the batteries run low. Starting Your Camera Press the POWER / MENU button to start the camera. Th e camera will sound a beep to confirm that it is ready [...]

- 8 - The Camera Modes Preview Mode This is the default mode for this camera, from which you can compose and take your photos. This mode also enables you to delete the last one or all of your photos, or to change the camera’s resolution selection. Delete All Photos Press the Menu button once to enter the Delete All Photos option. The follo wing w[...]

- 9 - Press the Shutter button once within 5 seconds to c hoose this option and delete the last photo taken with your camera. The last photo will be deleted, and the camera will automatically revert to Preview mode. Resolution Selection Press the Menu button three times to enter the Re solution Selection menu. The following will appear on the scree[...]

- 10 - -- QVGA photo (You can tak e 93 photos with the camera memory) Playback Mode This mode enables you to look through the photos stored on your c amera using the screen. Press the button to enter the Playback mode. The mode has three options: 1. View your photos as a slideshow: The camera will automatically show all photos stored in memory as a[...]

- 11 - To conserve battery pow er, if the camera is not us ed for 30 seconds, it will automatically switch off. Installing Spider-Man Photo Lab Software Before attempting to install the software, make sure that you do not have the camera or the USB cable attached to your computer. This may cause y our installation to fail. Do not connect the cable [...]

- 12 - 3. On the “Spider-Man Photo Lab" screen, click the “ Next” button. 4. Please review the license terms and click the “Agree” button to continue.[...]

- 13 - 5. Let the “Spider-Man Photo Lab” installer create th e folder where the program will be installed to, and then click “ Install ”. 6. Click “ Finish ” to let the “Spider-Man Photo Lab” installer finish the installation program.[...]

- 14 - 7. This will automatically launch the Insta ll shield for the camera driver. Click “ Next ” to continue. 8. Once the camera driver has finished installing you will have to restart your computer.[...]

- 15 - 9. Congratulations!! You have successfully installed the “Spider-Man Photo Lab” software and the Cam era driver. Downloading Photos Use the “Spider-Man Photo Lab” program to import photos from your camera. 1. Plug one end of th e USB cable into the US B slot on your camera. 2. Plug the other end of the USB cable into a USB port on yo[...]

- 16 - Select the “Y es, this time only” option and then click “Next”. From the next screen tha t appears, select the “In stall the software automatically (Recommended)” option and then click “Next”. Wait while the Wizard in stalls the Software.[...]

- 17 - From the next screen tha t appears click the “Continue Any way” button, to continue installing the hardware drivers. Click the “Finish” button. The hardware drivers have now been installed. 5. Be sure to wait un til the camera is recognized by your computer.[...]

- 18 - Important: For WinXP users - Do not open the s oftware until you see the “Your ne w hardware is installed and ready to use” pop-up box on the toolbar. If you do not see this message before you plug in your camera, the camera w ill not function properly. 6. Double-click t he “Spider-Man Photo Lab” icon tha t i s on yo ur de s kt op t [...]

- 19 - 8. The “Get photos from cam era” window will appear. 9. The photos will be placed by default in the C:My DocumentsMy Pictures folder. To select another location click the “Browse” button and then select a folder you wish to place your photos. 10. Click the “ OK ” button to proceed. 11. A download photos progress bar will appear[...]

- 20 - The photos on your camera will be downloaded and copied to the fo lder you selected on your computer. 12. Click the “ Select Photos ” button on the Main Menu screen. The fold er that you selected will be opened with the photos appearing in the View thumbnails screen. About Spider-Man Photo Lab “Spider-Man Photo Lab” will help you get[...]

- 21 - Spider-Man Book creator - write and print your own sticker books. The sticker book offers a variety of 10 templates/ themes to select for your book. You can also print 10 different “Fun stickers” with a variety of themes. Slide Show - select any one of your photo collections and vi ew them as full screen slide shows. You can even add bac[...]

- 22 - 1. To purchase the “Workshop Project” simply click the one you want and you will be referred to an online website where you can purchase them. 2. Once you purchase the “Workshop projects” they will be automat ically activated in the software. Camera Maintenance Your camera is a delicate instrument - please handle it with care. Techni[...]

- 23 - Damages or malfunctions not resulting from defects in material or work manship and damages or malfu nctions from other than normal use, including but limited to, r epair by unauth orized parties, ta mpering, modification or accident. What To Do When Service Is Required : When returning your defective product (postage pr e-paid) for service, [...]

- 24 - PC interface USB 1.1 Operating Systems Windows 2000 or XP Appendix B: Troubleshooting Q: I have taken photos, but my computer says "No photos in camera ." What do I do? • First, ensure that you have taken photos with your ca mera. Press the shutter button a few times to take some sample photos and try again. If you still get a no[...]

- 25 - 3. Restart the computer. 4. Once your computer is back up, plug t he camera into your computer's USB p ort. 5. Right-click on the "My Computer" icon. Select Properties. Click on hardware and then Device Manager. If the camera is installed correctly, there will be a category listed for "Imaging Devices" and clicking o[...]

- 26 - recommend always downloading your photos to your computer as soon as possible to prevent unintentional data loss. Q: I have a MAC, will your camera work? Unfortunately, the system requirements for our cameras require a Windows operating system. There is no Mac driver available and no current plan to develop This device complies with the part[...]

- 27 - NOTE: This equipment has been tested and found to compl y with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules, These limits are designed to provide reas ona ble protection against harmful interference in a residential installation. This equipment generates. Uses and can radiate radi o frequency energy and, if n[...]