Samsung 711ND manual

Install drivers Install p ro g rams !! !! SyncMaster 711ND[...]

Notation Failure t o follow di rections not ed by this symb ol could resu lt in bodily harm or dama ge to equipment . Prohibited Important to read and understand at all times Do not disassemble Disconnect the plug f rom the outl et Do not to uch Groundin g to preven t an electri c shock Powe r When not used f or extended perio d of time, set your c[...]

Do not pul l the plug out by the wi re nor touc h the plug with wet ha nds. This may caus e an electric sh ock or fire. Use only a prop erly grounded plug and recepta cle. An improper ground may cau se electric shoc k or equip ment damage . Insert the power plug firmly so that it do es not come loo se. A bad connec tion may cause fire. Do not exce [...]

Installation Be sure to conta ct an authoriz ed Service Cente r when inst alling your set in a locati on with heav y dust, high or low tempera tures, high humidity , and chemical su bstances , or where it will be operated for 2 4 hours co ntinuously suc h as an airport, t rain station or etc. Failure to do so may cau se seriou s damage to your set.[...]

Do not instal l the product in places with poor ventilati on, for insta nce, a bookshel f, closet, etc. Any increase in internal tem perature m ay cause fire. Set down the mon itor carefully. The monito r could be dama ged or broke n. Do not place the monitor face down. The TFT-LCD surface may be damaged. Installi ng a wall brac ket must be do ne b[...]

Use the recomme nded detergent with a smooth c loth. If the connector b etween the plug and the pin is dust y or dirty, clean i t properly with a dry cloth. A dirty connector may ca use an electric s hock or fire. Make sure to un plug the pow er cord before cl eaning the p roduct. Otherwise, this may cau se electric shock or fire. Unplug the power [...]

This may cause an electric shock or fire. Keep the pr oduct away f rom places e xposed to oil , smoke or moist ure; do not install inside a ve hicle. This may cau se malfunctio n, an electr ic shock or fire. Especially avoid operating the mon itor near water or outd oors where th e monitor could be ex posed to sn ow or rain. If the monitor is dr op[...]

This may cause an explosion or fire. Never insert an ything metall ic into the m onitor openings. This may cause an electric shock, fi re or injury. Do not insert m etal objects su ch as chopst icks, wire a nd gimlet or i nflammable objects such as pap er and match i nto the vent, headphone p ort or AV ports. It may caus e a fire or an el ectric sh[...]

Failure t o disconnect a ca ble may damage i t and lead to f ire or an electr ic shock. Place the pro duct out of c hildren's re ach, as they coul d damage it b y hanging o nto it. A falling product could ca use physical dam age even death. When not using the product fo r an extended time period , keep the produ ct unplugged. Otherwise, this m[...]

Correct Disposal of This Pro duct (Waste Elect rical & Elec tronic Equip ment) - Europe only (Applicable in the Euro pean Union a nd other Eu ropean cou ntries with separate co llection systems) This marking shown on the product or its literature, indicate s that it should not be dispose d with other hou sehold wastes at the end of its workin g[...]

Features What is a network monitor? This is a new c oncept monitor t hat accesses the PC and LAN services to displa y images, v ideo clips, documents, etc. by conn ecting to the host PC. It also has an additional function th at remotely connects t o the host PC for Inte rnet services, independentl y of the hos t PC. MagicNet, which is pro vided wit[...]

Packa g e Contents Please make su re the followi ng items ar e included wit h your monitor. If any items are missing, conta ct your de aler . Contact a lo cal dealer to buy optional items. Un p ackin g Monitor Manual Quick Setup Guide Warranty Card (Not availa ble in al l locations ) User's Guide, Monitor Drive r, Natural Color softw are, Magi[...]

Keyboard (USB) Mouse (USB) Y our Monito r Front MENU button [ ] Opens the OSD menu. Also use to exit the OSD menu o r return to the previous menu. MagicBrigh t™ button [] MagicBright ™ is a new featu re providing o ptimum vie wing environme nt depending o n the conte nts of the imag e you are watching. Curren tly six diffe rent modes are availa[...]

5) Sport For watching mo tion pictures such as a sport. 6) Movie For watching moti on pictures such as a DVD or V ideo CD. >> Click here to se e an anim ation clip Brightness butt on [ ] When OSD is not on the screen, p ush the button to a djust brightness. >> Click here to se e an animati on clip Adjust bu ttons [ ] Adjust it ems in th[...]

Cable Fix Ring When connecting th e cable is finished, fix the ca bles to the Cable Fix Ri ng. USB (USB Connecti on Termi nal) Connect USB de vices such as a mouse, keybo ard and external storage devices (e. g. DSC, MP3, e xternal stor age, etc.). LAN (LAN Connecti on Termi nal) Connect when using it as a monitor. See Connecting Cables for further [...]

Up-Down Left-Rig ht buttons ENTER AUTO LOCK MagicNet Rem ote Control ON / OFF Use these buttons to turn the monitor on or off. NUM, ENG Used to enter n umbers or text in English. SYMBOL : Used to enter symbols. DEL Functions a s the backspac e. ENTER Activates a highligh ted menu item . BRIGHT buttons When OSD is not on the screen, push the button [...]

Connectin g Cables Connect to the host PC usin g a LAN cable Host PC Hub LAN Cable Monito r Connect the powe r cord to the power termina l at the back o f the monitor. Connect t he mouse and the keyboard t o the USB por ts. Connect the L AN port on the back of the monitor and the hub. Connect the h ub and the LA N port of the hos t PC. The host PC [...]

Connect the power cord f or your monitor to the power port on the ba ck of the monitor. Plug the power cord for th e monitor into a nearby o utlet. Using the D-sub (A nalog) conne ctor on the vi deo card. - Connect the D-Sub Cabl e to the VGA I N port on the ba ck of your monit or. [VGA IN] To use the D -Sub (analog) outp ut through anoth er device[...]

USB (USB Connecti on Terminal) Connect USB devices such as a m ouse, keyboard a nd external storage dev ices (e.g. DSC, MP3, exte rnal storage , etc.). (You cannot use these de vices without c onnecting t o the host PC or switching to th e MagicNet.) LAN (LAN Connec tion Terminal ) Connec t the LAN cab le. D-sub 15-pin p ort [VGA OUT] Use it by con[...]

It can execute a fi le(s) regis tered with the h ost PC. And it c an also loca te and run any external devices conne cted to other netw ork monitors. When using M agicNet with MagicNet Se rver Program : ex ecute Networ k mode. Photo JPEG, BMP file format is suppo rted. Movie AVI, MPEG1/2, DivX 4.x, DivX 5 .x file format is sup ported. OFFICE/HTML P[...]

Right-click i t and sele ct 'New User'. Enter the user nam e, password and pro perties and sel ect 'Create'. A new acco unt is now crea ted.[...]

Right-click th e new account and select 'Prope rties'. Select 'A dd'. Select 'Advan ced'.[...]

Select t he 'Find Now ' button. Select ' Remote Deskt op User'.[...]

Click 'OK'. The new group is displaye d in the 'R emote Deskto p Users' list.[...]

Select one o f the old g roup and cl ick 'Delete'. Click 'Ap ply' and then 'OK '. A new acco unt is now crea ted.[...]

Other Useful Functions You can share a pro gram installed on th e host PC with othe r users. Before Usin g The host PC should be insta lled using Window s 2000/ 20 03 Server. Windows XP Home/Profe ssional does n ot support mult iple access by two users at the same time . If the inst alled OS does no t recognize t he mouse, di sconnect it and then r[...]

The default monitor pass word is “000000". Usin g the Stand Pivot Sta nd Stand Sto pper You can only ro tate the screen when the screen is lift ed to its maximum h eight. Do not rotate the scree n by force, as t his might dama ge the stand. Usin g the Stand Usin g Other Stands Attachin g a Base This monit or accepts a 100 m m x 100 m m VESA-[...]

Monitor Mounting i nterface pad ( Sol d separately ) Turn off your monitor an d unplug its power cord. Lay the LCD moni tor face-dow n on a flat su rface with a cush ion beneath it to protect the screen. Remove four screws and t hen remove the stand from the LCD monitor. Align the mo unting interfa ce pad with th e holes in the rear cover m ounting[...]

Ma g icNet ( Host PC ) MagicNet Instal lation | MagicNet Hel p Ma g icNet Installati on Insert the installation CD into the CD-ROM d rive. Click the Magic Net installati on file. Select installa tion Language, Cl ick "Next". When the Inst allShield Wizard window appe ars, click "N ext." Select "I agree to the term s of the [...]

You are requir ed to log in to the MagicN et Server prog ram. Please enter the passwo rd to login. The password cannot be ch anged when you are logged in . Select Syn cMaster 711ND. When selecting an Combin ation, install it only in th e integrati on format of the 400Pn/460 Pn and 711ND models. When selecting a single mo del, some functions may not[...]

Choose a fol der to inst all the Magi cNet program. Click "Install." The "Ins tallation Status" w indow appe ars.[...]

It is recommend ed restarting the system for the normal ope ration of the Ma gicNet Server pro gram. Click "Finish. " When the in stallation i s complete, the MagicNet e xecutable ic on appears on y our desktop. MagicNet Instal lation | MagicNet Help Ma g icNet Hel p Introduction to MagicNet | Schedule OSD | MDC OSD | Upper Menu | Rem ote[...]

MagicNet tra nsmits media fi les (pho to and movi e files) and o ffice files (PowerPoint , Excel, Word, HTML and PDF files) existing on a server to monitors using the Ethernet ne twork of the server/client architecture. Several monitors can b e connected to a serve r, and any file can be transmitte d to any monitor over the network. Files can be tr[...]

3. Update You can upda te a monito r's MagicNet f rom the server. However, this functi on only works w hen it is conne cted to a serv er/monitor with MagicN et2 or highe r. 4. Controlling Local Storage Device s/USB File Contro l of Monitors You can copy or D eletes to a monitor's local storage device o r via USB c onnected to the monitor.[...]

Date Monitors connected v ia the N etwork Fields Wi ndow Registeri ng to the Library Registering to the Library The libra ry consists of a collect ion of files which can be pl ayed from a monitor conn ected to th e MagicNet pr ogram. The mo nitor can o nly play files wi th the support ed formats registered in the library. The library only accept s [...]

Network The status bar next to the monitor name w ill displa y the overall n etwork status (traffic ) of all the monitors connected to the server. For example, assum e that the netw ork system capabi lity is 100Mb s and a 100Mbs n etwork card is installed in the serv er. I f there is no n etwork traffic u sed for other purposes, three mon itors are[...]

Displays the next fil e. Stop z When the files are se lected in the library list : Stops the sl ide show . z When monitori ng informat ion is be ing played from a schedu le : Stops the sl ide show . z When monitori ng the informa tion which th e monitor user is selectin g and play ing : This fun ction is di sabled. Full Scr een Enlarges/shrinks an [...]

1. When selecting a fi le from among the files alrea dy registered, or se lecting a ran dom file from the schedule re gistration window, the file is select ed as a schedule f ile through the library regist ration proce dures. 2. When selecting an image file f or the schedu le file, you can add backgrou nd music from among th e following mu sic file[...]

Date Displays the registered sc hedules in the Fields wind ow ( ) who se date are la ter than today ( ). Monitors Connected via the Network Lists the names of monitors regis tered via the netwo rk. When a monitor i s connected to the network, its ba ckground colo r changes to yello w-green. z Reconnect to the other server automatically 1. When sele[...]

In addition, you can cha nge the name of the monitors. 2. Select Monitor : The sched ules of the releva nt monitor is que ued. z Rename Type a new nam e and click confirm. The ne w name wil l be saved. The server progr am's Power- On option works only if the monitor's power is completely shut off. Please make sure not to use the Power-On [...]

In this case, when run ning menus that cann ot be adjusted in the ou tput source, the warning 'Adju stment unavai lable' will appear. Furthermore, w hen running a djustable men us, the select ed values w ill be applie d to the monitor, and the result s will be appl ied to the MD C status wind ow. If not applied to the monitor, it will als[...]

Volume : When changing the volum e, the changed details will appear in an OSD on the mo nitor screen. z 0 ~ 100 Source In the source tab, the output source of the mo nitor can be c hanged. When selecting the following output source, it will chan ge to the relev ant output s ource. When the relevant d evice is not con nected, a screen w ith 'Co[...]

sources. z 16 : 9 z 4 : 3 2. Color In TV/AV sources from the PC Adjusts th e contrast, bri ghtness and R, G,B. z Contrast z Brightness z Red z Green z Blue Time 1. Current Time Establishes the standard t ime of the monitor. In Hour, Minute and AM/PM, select the time, and click the Apply button. The curre nt standa rd time of the monitor will be set[...]

z Large z Small z Double1 z Double2 z Double3 2. Source When selectin g sources to be output to PI P, the relevant source will be applied to PI P. When trying to change a so urce where PI P cannot be ap plied or the co mbination of Main/Sub is incompati ble, a warning me ssage will appear on th e monitor. z PC z BNC z DVI z AV z S-Video z Componen [...]

z Manual 2. Scroll This func tion preve nts the scree n status ch anging when the same screen is maintained continuo usly. If you select the Period and Ti me and press the Apply button , the screen wil l scroll downwards at the s peed of the p reviously set time i n Period. For exampl e, for Period 1, Time 5, the sc reen will be rene wed every ho u[...]

Power Select Po wer ON/OFF . z ON z OFF Source Select an exte rnal source to adju st. z PC z MagicNet Image Adjusts th e color density, MagicBright and Reset. z Color z MagicBrigh t z Reset Setting Adjusts the settings for t he picture quality, positio n and auto adjustment. z Coarse z Fine z Position z Auto Adjustme nt Ticker OSD[...]

Message When entering a message to the server an d setting the options needed before sending it, the message is displayed o n the selected client monitor. z Display Option : - Displays a se ntence one l ine at a time. z Start : Displays a messa ge on the sele cted monitor. z Stop : Stops displaying a message on the select ed monitor. z Clear : Allo[...]

Login / Logou t Before using Ma gicNet, you first need to log in. After a succes sful login, the L ogin button ch anges to a Logout button. A succes sful login i s required to use the ma jority of fu nctions. When instal ling MagicNet for th e first time, the a dministrator acco unt is provided on the basis of the password entered by the user. Whe [...]

When adding an account, selec t from among th ree account t ypes, and the s elected account type decides the scope of using MagicNet. You may modify or d elete the acco unts of exis ting users as well as adding new users. Account Type Scope Administra tor You have the authori ty to use al l function s of MagicNet. Power User You are not a uthorized[...]

If the moni tor to the se rver is changed to SyncMaster 400Pn/460Pn o r an integr al model (mixe d type), the se rver will be ad justed accordin g to the model . Note that the sup portable file f ormats, MDC and message-re lated func tions will va ry depending on the select ed monitor m odel. z SyncMaster 400Pn/460Pn z SyncMaster 711ND z Combinatio[...]

z When you se e no menu in a zoom ed-in picture Move up to the to p of the imag e Move down to the bottom of the im age Move to the left of t he image Move to the right of the image MUSIC (Appli cable only to SyncMaster 400 Pn/460Pn) Supported File Formats Music File : MP3 Remote Control z When the files are se lected in the library list. File view[...]

Supported File Formats Video File : MPE G1/2, DivX 4. x/5.x (SyncMast er 400Pn/460P n) Video File : MP EG1/2/4, DivX 4. x/5.x, WMV9 (SyncMaste r 711ND) Remote Control z When the files are se lected in the library list Move to th e top (when the cursor is pl aced at the top, it will go back to the last file o f the previous page) Move to the bottom [...]

Move to the next p age Move to the previo us page Exit PDF z Excel Move to the upper cell Move to the lower cell Move to the left ce ll Move to the right cell Move to the previo us page Move to the next p age Move to the right sheet Move to the left sh eet Exit Exce l z Power point Normal Move to the top Move to the previo us page Move to the previ[...]

Exit Power point z Word Move to the top Move to the botto m Move to the previo us page Move to the next p age Exit Word z HTML Move to the top Move to the botto m Move to the previo us page Move to the next p age Exit HTML z Internet Move the mo use cursor up Move the mo use cursor down Move the mouse cursor to th e left Move the mouse cursor to th[...]

To remove MagicNet , complete the followin g steps. 1. Select [ St art ] → [ Settings ] → [ Control Panel ]. 2. For Wi ndows XP, select [ Start ] → [ Control Panel ]. 3. Double-c lick the [ Add or Remove Programs ] icon in the Con trol Panel. 4. Click the Magi cNet in the [ Add or Remove Programs ] window to high light it . 5. Click [ Change/[...]

Introduction to MagicNet | Schedule OSD | MDC Adjustme nt | Upper Menu | Remote Control Adjustme nt | Removing Program | T roublesho oting | Specifications Specifications Supported File Format Spec (SyncMaste r 400Pn/460P n) Supported File Format Spec (SyncMaster 71 1ND) File Format Resolution Bitrate Audio Sampling rate CBR VBR Video MPEG1 720x480[...]

For a LAN-conn ected environm ent, the conn ectable number of devices ma y be reduced depending on the availa bility of neig hboring netw orks. Server System Configuration CPU RAM Ether net OS Application Minimum P1.8 256 M 100 M Windows X P Windows 2 000 (Service Pack 4) WMP 9 or la ter Recommended P3.0 Ghz 512 M Local Device (USB ) Connection Spe[...]

Click the "Insta ll" button in the "Warning" window. Monitor driver installation is comple ted. Windows XP /2000 Insert CD into the CD -ROM drive. Click "Windows XP/2000 Driver". Choose your monit or model in the model list, then click the "OK" button. If you can see following mess age window, the n click the[...]

Windows X P | Wi ndows 200 0 | Window s ME | Window s NT | Li nux Micros oft ® Windows ® XP Operating Sy stem Insert CD into the CD -ROM drive. Click "Start" → "Control Panel " then click the "App earance an d Themes" icon. Click "Display" icon an d choose the "Set tings" tab then click "Ad[...]

Click the "Bro wse" button then c hoose A:(D:D river) and ch oose your mo nitor model in the mode l list and click the "Next" bu tton. If you can see following "Mes sage" window, then click the "Con tinue Anyway" but ton. Then click "OK" button. This monitor dri ver is under certifyi ng MS logo, an[...]

Monitor driver installation is comple ted. Micros oft ® Windows ® 2000 Opera ting System When you can see "Digital Signature N ot Found" on yo ur monitor, foll ow these steps . How to inst all Choose "OK" bu tton on th e "Insert disk " window. Click the "B rowse" button on the "File Need ed" windo[...]

Click "Appl y" button if yo u see the scre en working norm ally after click ing "Test". If the s creen is not normal, chan ge to a differen t mode (lower mo de of resolution , colors or freque ncy). If there is no Mode at All Display Mod es, se lect the le vel of resol ution and ve rtical frequency by refe rring to the Preset Ti[...]

How to delete the Natural Color software p ro g ram Select "Setti ng/Control Panel " on the "Start" men u and then do uble-click "Add /Delete a program ". Select Natural C olor from the list and th en click the "Add/D elete" button. Overvi ew | Installation | OSD Mo de | Color Calibration | Uninstall | Troubl[...]

2. Cl ick the MagicTune™ installa tion file. 3. Select installatio n Language, Click "Next". 4. When the InstallationSh ield Wizard window a ppears, click "Next." 5. Select "I agree to the terms of the license agreeme nt" to accept the terms of use. 6. Choose a folder to insta ll the MagicTune™ program.[...]

7. Click "Install." 8. The "Installa tion Sta tus" wind ow appears. 9. Click " Finish."[...]

10. When the installati on is comple te, the MagicTun e™ executable icon appears on yo ur desktop. Double-click the ic on to start the p rogram. MagicTune™ execution i con may no t appear dep ending on s pecification of computer system or monit or. If that ha ppens, press F5 Key . Installation Problems The instal lation of Mag icTune™ can b e[...]

MagicTune™ allows for quick accurate tuning of the display with th e ability to easily save a nd use monitor configura tions that are best suited for you. z OSD mode may appear inconsistent wi th the explanation in guidance book depending on specification of each monitor. z When Pivot is functioning, part of MagicTune™ Program may not operate n[...]

MagicBright™ 3. Game : For watching mo tion pictures s uch as a Game. 4. Sport : For watching moti on pictures such as a Sport. 5. Movie: For watching mo tion pictures such as a DVD or Vid eo CD. 6. Cu stom: Althou gh the value s are careful ly chosen by our engineers , the pre- configure d values may not be comfortable to your eyes depe nding on[...]

MagicColor automatical ly get the pl ay screen high lighted (it wi ll be suppo rted in pla yers of Gom, Adre nalin, KCP, Wi ndow Media, and Power DV D etc., )Som e other players also can b e highlight ed but could ha ve some proble ms. { Tusk menu HUE Adjust the tint of the co lor. Saturat ion Adju sts the color satu ration. Brightness Adjusts the [...]

Image Setup z Coarse : Removes noise such as vertical stripe s. Coarse adjust ment may move the screen image ar ea. You may reloc ate it to t he center using t he Horizont al Control men u. z Auto Setup : Auto adjustm ent allows the m onitor to self-adj ust to the in coming video signa l. The values of fine, coarse and position are adjuste d automa[...]

Overvi ew | Installation | OSD Mode | Color Calibration | Uninstall | Troubles hooting Color Calibration Color Calibration Color Cali bration guide s you to get opt imal color con dition for your monitor. Proceed following 5steps for ge tting optimal monitor color con dition . 1. Control "Brightnes s control bar" fo r matching the b right[...]

Uninstall The MagicTu ne™ program can be remo ved only by using the "Ad d or Remove Programs" o ption of the Windows™ Control P anel. Perform the fo llowing step s remove Ma gicTune™. 1. Go to [Task Tray] ' [Sta rt] ' [Settings] and select [Control Panel] in the menu. If the prog ram runs on Windows™ XP, go to [C ontrol [...]

An error occurs when the video card driver is not inst alled prope rly. This happen s when the cur rent video car d list is not disp layed normall y. You can chec k this via Start → Setup → Sys tem → Hardware → Device Manager → Disp lay adapt or. Visit the vi deo card mak er's homepag e and down load and ins tall the lat est driver. [...]

MagicTun e™ doesn't work properl y. Have you ch anged your PC or video g raphic card? Download the lat est program. The program can be downloaded http://www.samsung. com/monitor/mag icTune z Visit th e MagicT une™ website for technical supp ort for MagicTun e™, FAQs (questio ns and answers) and software up grades. z Visit th e MagicT une[...]

* WindowsT is registered t rademark of Mi crosoft Corp oration,In c. Overview | Installation | Interface | Uninstall | Troub leshooting Installation 1. Insert the installation CD int o the CD-ROM drive . 2. Click the Magi cRotation in stallation fil e. 3. Select installatio n Language, Click "Next". 4. Whe n the Install Shield Wizard wind[...]

6. Choose a folder to insta ll the MagicRotat ion program. 7. Click "Install." 8. The "Installa tion Sta tus" wind ow appears.[...]

9. Click " Finish." Have to reboot the system in orde r for the MagicRot ation to work proper ly. 10. When the insta llation is comp lete, the Magi cRotation exe cutable icon appears on you r desktop. Installation Problems The instal lation of Mag icRotatio n can be affecte d by the factors such as video card, motherbo ard and the network[...]

2. If some applicatio ns like Window s™ Media Playe r, Real Playe r, etc. are n ot displayin g movie files properly in 90, 18 0 and 270 orientations the n do the foll owing : { Close the applicati on. { Select the Orie ntation (90, 18 0, 270) you wa nt to view the ap plication. { Relaunch the appli cation. In most cases this should f ix the probl[...]

The Menu on task bar Menu pop up a t the mouse ri ght button clic k. Rotate : Display will get ro tated by the un it of 90 degree Rotate to 0 : Disp lay will get rotated to 0 de gree from the current ang le of rotati on. Rotate to 90 : Display will get rotated to 90 de gree from the curre nt angle of rota tion.[...]

Rotate to 180 : Display will get rotated to 180 degree from the curren t angle of rotation. Rotate to 270 : Display will get rotated to 270 degree from the curren t angle of rotation.[...]

Hot key : Hot Keys a re available by default and c an be change d by user. It can be assigned by user directly wi t h keyboard a fter changing the existing HotK ey. User can create the hot key with the com bination of Shift, Ctrl, Alt and general keys. In case only g eneral key is pres sed, it will be assigned in the form of Alt+general key. Help :[...]

7. After uninstall restart the syste m to complet e the uninsta llation. Visit th e MagicRot ation website for technical sup port for Magi cRotation, FAQs (questio ns and answ ers) and software up grades. * Windows™ is registered trademark of Micro soft Corporation,Inc. Overview | Installation | Interface | Uni nstall | Troubleshooting Troublesho[...]

Ma g icNet In the OSD imag e of MagicNet, N etwork mode is the sa me as Device. Menu Descripti on Play/Stop Network When using MagicNet wit h MagicNet Server Prog ram : execute Network mode. Device When using MagicNet wit h the devic e directly con nected to monitor : execute D evice mode. Internet Connects to the Internet. You can set various fu n[...]

Setup numeric format Schedule Vie w Displays a sched ule. Remote Desktop Allows you t o adjust th e connection settings of the host PC. TCP/IP You can change the TCP/IP settings. DHCP, STATIC Homepage You can chan ge the Inte rnet primary address. Network Setup Yo u can modify the network settings. Change Passwor d You can chan ge the pass word. Ad[...]

Control Buttons [ ] Opens the OSD menu. Also use to exit t he OSD menu or re turn to the previous menu. [ ] These bu ttons allow yo u to adjust items in the m enu. [ ] Pres s this button to activate a hi ghlighted me nu item. [AUTO] When the 'AUTO' button is p ressed, the A uto Adjustment scre en appears as shown in the animated s creen o[...]

Menu Descript ion AUTO When the 'AUTO' button is pressed , the Auto Ad justment sc reen appears a s shown in the animated scree n on the ce nter. The values of fine , coarse and posi tion are adjusted au tomatically. To make the au tomatic adjustment fun ction sharper, exec ute the 'AUTO' functio n while the AUTO PATTERN is on. [...]

Menu Descript ion OSD Lock & Unlock After pushing the "MENU" button more th an 5 seconds, OSD functi on is locked (unlocked). You can also adjust the bri ghtness and c ontrast of the m onitor with the OSD adjustme nt locking feature . Ma g icBri g ht™ Menu Descript ion MagicBrigh t™ Push the Mag icBright™ button to circle thro u[...]

Bri g htness Menu Descript ion Brightness When OSD is not on the screen, p ush the button to a djust brightness. SOURCE Menu Descript ion SOURCE Selects the Video sign al whil e the OSD is off. (Analog/Ma gicNet)[...]

OSD Function Picture Brightness Con trast Color MagicColor Color Tone Color Control Gamm a Image Coarse Fine Sharpn ess H-Position V-Position OSD Language H-Position V-Position Transparency Display Time Setup Image Reset Color Reset Information Picture Menu Description P lay/Stop Brightness You can use t he on-screen menus to change the brightness [...]

Menu Description P lay/Stop MagicColor MagicColo r is a new techno logy that Samsu ng has exclusiv ely developed to improve di gital image and to displa y natural col or more clearly wit hout disturbing image quality . Off Returns to the orig inal mode . Demo The screen before app lying MagicCol or appears on the right and the screen a fter applyi [...]

Color Tone The tone of th e color can be changed a nd one of f our modes can be selected -Cool, Normal , Warm and Custo m. ( Not available in MagicColor m ode of Full a nd Intelligent. ) MENU → , → → , → → , → MENU Color Control Adjusts individual Red, Green, Blue colo r balance. - Red, Green, Bl ue ( Not available in MagicColor m ode o[...]

Sharpness Changes the cleara nce of image. MENU → , → → , → → , → MENU A vailable in analog Mode Only H-Pos ition Changes the hori zontal posi tion of the mo nitor's en tire display. MENU → , → → , → → , → MENU A vailable in analog Mode Only V-Position Changes the vertical po sition of t he monitor's e ntire displa[...]

MENU → , → → , → → , → MENU Transparenc y Change the tran sparency of the ba ckground of t he OSD. MENU → , → → , → → , → MENU Display Time The menu wi ll be automat ically turned off if no adjus tments are made for a cert ain time per iod. You can set the amount of time the me nu will wait before it is turned off. - 5 Sec, [...]

Menu Descript ion Information Shows a vide o source, disp lay mode on the OS D screen. MENU → ,[...]

Check List Before calling for servi ce, check the i nformation in t his section t o see if you can rem edy any proble ms yourself. If you do ne ed assistance, plea se call the phone nu mber on the Inf ormation sec tion or contact your deal er . Symptom Check List Solutions No images on the screen. I cannot turn on th e monitor. Is the power cord co[...]

I cannot see the On Screen Display. Have you locke d the On Screen Display (OSD) M enu to prevent changes? Unlock the OSD by pressing the [ ] button for at least 5 seconds. The scree n shows strange colors o r just black an d white. Is the screen displayin g only on e color as if looking a t the screen through a cellopha ne paper? Check the si gnal[...]

→ After deleting Plug and Pl ay monitor, fi nd 'Plug and Play monitor' by se arching new Hardw are. MagicTune™ is an additional software for the monitor. Some graphic card s may not supp ort your monitor. When you ha ve a problem with the grap hic card, vis it our website to check the co mpatible grap hic card lis t provided. http://w[...]

How can I clean th e outer case/LCD Panel? Disconnect the powe r cord and then c lean the monitor with a so ft cloth, using ei ther a cleaning solution or pl ain water. Do not leave any remain s of the deterg ent nor scratch the case. Do no t allow any wat er to go inside the monitor. Self-Test Self-Test Fea ture Check | Warning Messages | Env iron[...]

A monitor re creates visua l signals recei ved from the computer. Therefore, if ther e is trouble with the computer or the video card, t his can cause the monitor to becom e blank, ha ve poor colori ng, noise, Video mode n ot supported, etc. In this case , first check th e source of th e problem, an d then contact the Service Center or your dealer.[...]

S p ecifications General Model Name SyncMaster 711ND LCD Panel Size 17 " Di agonal ( 43 cm) Display area 337.92 mm (H) x 2 70.336 mm (V) Pixel Pitch 0.264 mm (H) x 0.26 4 mm (V) Type a-si TFT active matrix Synchron ization Horizontal 30 ~ 81 kHz Vertical 56 ~ 75 Hz Display Color 16.2 M Colors Resolution Optimum reso lution 1280 x 1024@ 60 Hz M[...]

Signal Cable 15pin to 15pi n D-sub ca ble, Detacha ble, 1.8 m Signal Connectors 15pin 3-ro w D-Sub co nnector Power Cons umption Less than 45 W Dimensions (W x D x H) / Weight 370.0 x 60 x 31 6.0 mm / 14. 6 x 2.4 x 13. 5 inch (Witho ut Stand) 370.0 x 200 x 4 04.0 mm / 14 .6 x 7.9 x 15.9 inch (With Basic Stand ) / 5.8 kg VESA Mounting Interfac e 100[...]

Local Devi ce (USB) Connec tion Spee d When booting u p a monitor, a b lank screen may ap pear for 3 ~ 4 s econds until the Ma gicNet screen appears. If you turn the m onitor off while boo ting, it may da mage the product . Local Device (USB) compatibility HID(Human Interface Devices) : Keyb oard, Mouse MSC(Mass St orage Clas s), Devices usi ng the[...]

Preset Timin g Modes If the signal transf erred from the comp uter is the sa me as the follo wing Preset Timing Modes, the screen will be ad justed au tomatically. Howe ver, if the sign al differs, the screen ma y go blank whil e the power LED is on. Refer to the vide o card manual and adjust the screen as f ollows. Preset Timin g Modes Display Mod[...]

Vertical Freque ncy Like a fluoresce nt lamp, the sc reen has to repeat the same image m any times per second to d isplay an im age to the user. Th e frequency of t his repetition is call ed Vertical Fr equency or Refresh Ra te. Unit : Hz[...]

Contact SAMSUNG WO RLD-WIDE If you have any questions or comm ents relati ng to Sa msung products, ple ase contact the SAMSUNG customer care center . North America CANADA 1- 800-SAMSUNG (7 267864) http://www.samsung.co m/ca MEXICO 01-800-SAMS UNG (7267864 ) http://www.samsung.com/mx U.S.A 1-800-SAMSUNG (726786 4) http://w ww.samsung.com Latin Ameri[...]

CZECH REPUBLI C 844 000 844 http://www.samsun g.com/cz DENMARK 38 322 887 http://www.samsung. com/dk FINLAND 09 69 3 79 554 http://w ww.samsung.co m/fi FRANCE 08 25 08 65 65 (€ 0,15/min ) http://www.samsung. com/fr GERMANY 01805 - 121213 (€ 0,12/M in) http://www.samsung. de HUNGARY 06 40 985 985 http://www.sa msung.com/hu ITALIA 199 153 153 htt[...]

SOUTH AFRICA 0860 726 7864 (SAMSU NG) http://www.samsung. com/za U.A.E 800SAMSUNG (7 267864) http://www.samsung.co m/mea Terms Dot Pitch The image o n a monitor is composed of red, green a nd blue dots . The closer the do ts, the higher the resolution. The distance b etween two dot s of the same color is called th e 'Dot Pitch'. Unit : m [...]

This is not from bad qual ity and you can u se it withou t uneasines s. For example, the number of TFT LC D sub pixels that is contained in this pr oduct are 3,932,160. When you clea n the monito r and the p anel outside, please appl y the recommen ded small amo unt of cleaner by u sing soft and d ry cloth a nd polish i t. Let LCD area n ot to be f[...]

PRODUCT INFORMATION (I mage Retention Free) LCD Monitors and TVs may have image retentio n when switching from one imag e to an other especially after displaying a statio nary image for a long time. This guide is to demonstrate corre ct usag e of LC D products in order to protect them from Image retention. Warrant y Warranty does not cover an y dam[...]

Ex) The best way to prote ct your monitor from Image retentio n i s to set your PC or S y stem to o p erate a Screen Saver p ro g ram when y ou are not usin g it. Image retention may not o ccur when a LCD panel is opera ted under normal conditio ns. Normal conditions are defined as continuously changi ng video patterns. Whe n th e LC D panel is ope[...]