Samsung 940MW manual

Install Drivers Install Pro g rams SyncMaster 940MW[...]

Failure t o follow di rections not ed by this symb ol could resu lt in bodily harm or da mage to equipment. Prohibited Importan t to read and un derstand at all times Do not disassemble Disconnect t he plug from the outlet Do not touch Groundin g to preven t an electri c shock Power When not used f or extended period of time, set your computer to D[...]

Do not pull the plug out by the wire nor touch the plug with wet hands. z This may cause an electric sh ock or fire. Use only a properly grounded plug and receptacle. z An improper grou nd may cause electric sh ock or equipment da mage. Insert the power plug firmly so that it does not come loose. z A bad connec tion may cause fire. Do not excessive[...]

z This may cause dam age to the product o r human body. Install the monitor base in a showcase or shelf so that the end of the base does not protrude from the showcase or shelf. z Dropping the produ ct may cause damage to the product or person al injury. Do not place the product on the floor. z Someone, specif ically children could trip o ver it. D[...]

z Installation by unqualified personnel may result in injury. z Always use t he mounting device specif ied in the owner' s manual. When installing the product, make sure to keep it away from the wall (more than 10cm/4inch) for ventilation purposes. z Poor ventilation m ay cause an increase in the intern al temperature of t he product, resultin[...]

Make sure to unplug the power cord before cleaning the product. z Otherwise, this ma y cause electric shock or fire. Unplug the power cord from the power outlet and wipe the product using a soft, dry cloth. z Do not use any chemicals such as wa x, benzene, al cohol, thinne rs, insectic ide, air freshe ner, lubricant or detergent. Contact the Servic[...]

Do not try to move the monitor by pulling only the wire or the signal cable. z This may cau se a breakdo wn, electr ic shock or fir e due to damage to the cable. Do not move the monitor right or left by pulling only the wire or the signal cable. z This may cau se a breakdo wn, electr ic shock or fir e due to damage to the cable. Do not cover the ve[...]

Keep the volume at a proper level when you use the headphones. z Excessivel y loud volume lev els may dama ge hearing. Watching the monitor continuously at a too close angle may result in eyesight damage. To ease eye strain, take at least a five-minute break after every hour of using the monitor . Do not install the product on an unstable, uneven s[...]

z If swallowed, see a docto r immediately. When replacing batteries, place the batte ries in the correct +/- polarity pos ition as indicated on battery holder. z Incorrect polarity may cause a battery to break or leak and could lead to fire, injury, or contamina tion (damage). Use only specified standard batteries. Do not use new and used batteries[...]

Please make sure the following items are included with your monitor . If any items are missing, contact your dealer . Contact a local deale r to bu y o p tional items. Unpacking Monito r Manual Quick Setup Guide Warranty Card ( Not available in all locations ) User's Guide, Monitor Driver, Natural Color software[...]

Cable D-Sub Cable Audio Cable Power Cord Others Remote Control Batteries ( AAA X 2 ) Connecte r Sold se p aratel y DVI Cable RCA Cable (Video-Yellow, Audio-Red and White ) Component(P R , P B , Y) Cable S- V ideo Cable Ear p hones/Head p hones SCART Cable TV antenna cable[...]

Front 1. SOURCE 2. PIP 3. MENU 4. CH 5. - VOL + 6. [ ] Enter button 7. [ ] Power button 8. Power indicator 9. Remote Control Sensor 10. Speaker 1. SOURCE Press the 'SOURCE' button to change the input sign al source. Changing th e source is al lowed only in ex ternal devices t hat are connect ed to the moni tor at the time. To switch Scree[...]

Rear (The configuration at the back of the monitor may va ry from product to product.) 1. POWER Power terminal Connect the po wer cord for your mon itor to the POWER on the back of the monitor. This product ma y be used with 100 ~ 24 0VAC(+/- 10%). 2. DVI/PC IN DVI/PC IN 1. DVI(HDCP) : Connect the DVI cab le to the DVI(HDCP) port o n the back of yo[...]

4. COMPONENT IN COMPONENT IN 1. R - AUDIO - L : DVD/DTV soun d input terminal (left/right ) 2. P R , P B ,Y : DVD/DTV video inp ut terminal(P R , P B ,Y) 5. ANT IN ANT IN Connect the CATV ca ble or TV antenna cable to the "ANT IN" port on the rear side of t he monitor. Make sure to use a TV antenna cabl e (sold separately) as t he antenna[...]

See Connecting t he monito r for further info rmation regardin g cable connections. Remote Control The performance of the remote control may be affected by a TV or other electronic device operated near the monitor, causin g malfunction due to interference with fre q uenc y . 1. POWER 2. Number button 3. +100, -/-- 4. - + 5. MUTE 6. TTX/MIX 7. MENU [...]

2. Number button Selects TV ch annels in the TV mode. Used to change channels when PIP is se lected and the PIP Source is set to TV. 3. +100 Press to select channels over 100. For example, to sele ct channel 121, press "+10 0", then press "2" and "1". - / -- ( One/Two-Di g it channel selection ) Use to select a ch anne[...]

17. STILL - O p erates onl y for the CVBS, S- V ideo and RF Si g nal sources. Press the button once to freeze the screen. Pre ss it again to unfreeze . 18. PIP - Available in PC/DVI Mode Push the PIP button t o turn PIP screen On/Off. 19. S.MODE ( Sound Mode ) When you press this butt on, current mode is disp layed on the lower center o f the scree[...]

Connectin g the monitor 1.Connectin g to a Com p ute r 1. Connect the p ower cord for your monitor to the POWER on the back of th e monitor. Plug the power cord for the m onitor into a nearby outlet. 2-1. Using the D-sub (Analog) c onnector on the video card. Connect t he signal cable to t he RGB port on the b ack of your mon itor. 2-2. Using the D[...]

1. Using the D-su b (Analog) connector o n the video card. Connect t he signal cable to the D-SUB port on the Macinto sh compute r. 2. For older mode l Macintoshes, you need to adjust th e resolution control DIP switch on the Macintosh adapter (optiona l) referring to the sw itch configuration t able shown on its rear . 3. Turn on th e monitor an d[...]

3. Then, start the DVD, VCR or Camcord ers with a DVD disc or tap e inserted. 4. Select AV or S-Vide o using the SOURCE . 1-2. Connecting EXT.(RGB) - It only app lies to AV DEVICE that supports SCART. Connect to the DVD Devices input if the device ha s a EXT (RGB) jack. You can watch DV D simply by hooking up the D VD with the monitor as long as th[...]

Is weak signal causing poor reception? Purchase and install a signal am plifier for better reception . In areas where Antenna cable is not supported, first, attach Connecter to TV antenna . 3. Connec ting DVD/DTV Set Top Box Connect to th e DVD/DTVSet Top Box in put if the device has a DVD/DTV connecto r. You can watch Com ponent simply b y hooking[...]

1. Connect yo ur headph ones to the H eadphone co nnection t erminal. Using the Stand This monitor su pports various types o f VESA-standard bases. You need to e ither fold or remo ve the base in u se in order to i nstall a VESA b ase. 1. Folding the ba se The monitor may b e reclined from -1 to 23 degrees. 2. Attaching a base This moni tor accepts[...]

four screws that cam e with the arm- type base, wall mount h anger or other base . To mount the monitor on a wall, you should purchase the wall mountin g kit that allows you to mount the monito r at least 10cm away from the wall surface. Contact the nearest Samsung Service Cen ter for more information. Samsung Electronics will n ot be responsible f[...]

4. If you can see following message window , then click the "Continue Anyway" button. Then click "OK" button. 5. Monitor driver installation is completed. This moni tor driver is under certif ied MS logo,a nd this inst allation do esn't dama ge your system.The certified driver will be posted on S amsung Monitor Hom epage. h[...]

3. Click " Display " icon an d choose th e " Settings " tab then click " Advanced.. ". 4. Click the " Properties " button on the " Monitor " tab and se lect " Driver " tab. 5. Click " Update Driver.. " and select " Install from a list or.. " then click " Nex t &quo[...]

8. If you can s ee followin g message win dow, then click t he " Continue Anyway " button. Then click " OK " button. This moni tor driver is under certif ied MS logo,a nd this inst allation do esn't damage your system. The certifie d driver will be po sted on Samsung Monitor Homep age. http://www.samsung. com/ 9. Click the [...]

1. Click " Start " , " Setting " , " Control Panel ". 2. Double click the " Displ ay " Icon. 3. Choose the " Settings " tab and then click " Advanced.. ". 4. Choose " Monitor ". 5. Click " Driver " and th en click on " Update Driver.. " then click on the "[...]

One of the re cent problems in using a co mputer is that the color of the images printed o ut by a printer or other imag es scanned by a scanner or a digital camera are not the same as those sh own on the monitor. The Natural Colo r S/W is the very solu tion for this problem. It is a color administration system developed by Samsung E lectronic s in[...]

Input Available Source List : PC / DVI : TV : Ext. : AV : S- Video : Component OSD Description Play/Stop Source List Use to select PC or other external input sources connected to the Monitor. Use to select the screen of your choice. - The direct button on the remote control is 'SOURCE' button. PC DVI : HDCP supported TV Ext. It is connect[...]

- Available in PC, DVI modes. PIP : Turn the PIP Screen on or off. ON/ Off - The direct button on the remote control is ' PIP ' button. Source : Select the input source for the PIP. Main Source: PC / DVI PIP Source (Sub): TV / Ext. / AV / S-Video / Component - The direct button on the remote control is ' SOURCE ' button. Size : [...]

Currently four different modes are available: Entertain, Internet,Text and Custom. Each mode has its own pre-configured brightness value. You can easily select one of four settings by simply pressing the MagicBright™ control button. - The direct button on the remote control is 'M/B' button. Entertain For watching motion pictures such as[...]

: Adjusts the Brightness of the PIP window on the screen. Sharpness : Adjusts the Sharpness of the PIP window on the screen. Colour : Adjusts the Color of the PIP window on the screen. Source List : TV / Ext. / AV / S-Video / Component Available Source List : PC / DVI : TV : Ext. : AV : S- Video : Component OSD Description Play/Stop Mode The monito[...]

Size You can switch the Size. - The direct button on the remote control is 'P.SIZE' button. Auto Wide / Wide / Zoom / 4:3 Zoom is not available in 1080i(or over 720p) of DTV. Sound Available Source List : PC / DVI : TV : Ext. : AV : S- Video : Component OSD Description Play/Stop Mode The monitor has a built-in high fidelity stereo amplifi[...]

right speakers and you can hear the sound even when the sound value is set to 0. Auto Volume Reduces the differences in volume level among broadcasters. On /Off Dolby Virtual Dolby Virtual Sound On/Off (Dolby Virtual simulates the effect of the Dolby Surround sound system, recreating the movie-theatre or concert-hall- quality sound.) On /Off BBE Sw[...]

Manual Store You can scan the frequency ranges available on your television in your area and store all the channels found manually. Programme : Inputting the appropriate program number on the screen. Colour System : Adjust repeatedly until the color is of the best quality. AUTO, PAL, SECAM, NT4.43 Sound System : Adjust repeatedly until the sound is[...]

Area Configuration When you turn the power on of the product for the first time since it released from a factory, menu to select location will appear. Choose the region and country where you use the monitor. This is because broadcasting type varies according to region and country. You can select broadcasting type in OSD menu as well by selecting ME[...]

Self-Test F eature Check Check the followin g items yourself before calling for service . Contact the service center for problems that you ca nnot solve by your self. Self-Test Featur e Check | Not Optimum Mode | Display Adapt er Drive r Maintenanc e and Cleaning | Symptoms & Recommende d Actions 1. Self-Test Feature Check Your monitor provides[...]

supported by the monitor. 3. Display Adapter D river Display adapt er refers to the computer video card driver. If the adapter is not properly set, you cannot a djust resolution, freque ncy or color and you canno t instal l the monito r driver. 1. Checking Adapter Driver Click Start Settings Control Panel Display Se ttings Advanced Adapter. If &quo[...]

Installation | Scr een | Audio | Remote Contro l 1. Problems related to Installa tion Problems related to the monitor instal lation and thei r solutions are list ed. Problems Solutions PC Mode It appears the PC does not function normally. z Check if the Displa y Adapter Driver (VGA Drive r) is properly installed. (Refer to Installing Driver ) The m[...]

dark shadows. White color is poor. Power Indicator blinks green. z The monitor is currently saving the changes mad e in settings to the OSD memo ry. Screen is blank and power indicator light is steady green or blinks every 0.5 or 1 seconds z The monitor is using its p ower management syste m. z press a key on the keyb oard The scree n is blank and [...]

How can I set the Powe r Saving functi on? Windows ME/ XP/2000 : Set the functi on at BIOS-SETUP o f the computer or the screen saver. (Refer to W indows/Computer Manu al). How can I clean t he outer case/LCD Panel? Disconnect the power cord and then clean the monitor with a soft cloth, using ei ther a clea ning soluti on or plai n water. Do not le[...]

General Genera l Model Name SyncMaste r 940MW LCD Pa nel Size 19.0 inch diagonal (48 cm ) Display area 480.24 mm(H) x 255.15 mm(V) Pixel Pitc h 0.2835 mm(H ) x 0.2835 mm(V) Type a-si TFT active matrix Synchronization Horizontal 30 ~ 6 1 kHz Vertical 56 ~ 75 Hz Display Color 16.7 M Colors Resolution Optimum resolu tion WXGA+ 1440 x 900 @ 60 Hz Maxim[...]

DVI-D to DVI-D connect or, Detachable, 2 .0 m (Option) Signal connectors 15pin 3-ro w D-sub conn ector, 24pin 3-ro w DVI-D connect or Power Consumption Less than 55 W Power Sav ing Less than 2 W Dimensions (WxDxH)/ Weight 466 x 217 x 406 mm / 18.3 x 8.5 x 16.0 inch / 6 .2 kg (With Stan d) 466 X 66 X 37 1 mm /18.3 x 2.6 x 14.6 inch (Without Stan d) [...]

If the signal transf erred from the compute r is the same as the f ollowing Preset Timi ng Modes, the sc reen will be adjusted automatically. Howe ver, if the signal di ffers, the screen may go blank wh ile the power LED is on. Refer to th e video car d manual and a djust the scr een as foll ows. Table 1. Preset Timing Modes Display Mode Horizontal[...]

Countries Israel Denmark Portugal Netherlands Austria Singapore Indonesi a Australi a China North Korea Rumani a England South Afric a Hongkong Argentina Uruguay Paraguay Brazil Broadcasting Systems SECAM SECAM-B SECA M-D SECAM-K 1 SE CAM-L Countries Iran Iraq Saudi arab ia Syria Lebanon Egypt Russia Hungary Bulgaria Poland Franc e Horizontal Frequ[...]

Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung pr oducts, please contact the SAMSUNG custome r care center. North America CANADA 1-800-SAMSUNG (72 67864) http ://www.samsung.com/ ca MEXICO 01-800-SA MSUNG (7267 864) http://www.samsung. com/mx U.S.A 1-800-SAMSUNG (726 7864) http://www.samsun g.com Latin Am erica[...]

DENMARK 38 322 887 http://www.samsung. com/dk FINLAN D 09 693 79 554 http://www.samsung. com/fi FRANCE 08 25 08 65 65 (€ 0,15/min) http://www.samsung. com/fr GERMANY 01805 - 121213 (€ 0,12/M in) http://www.samsung. de HUNGARY 06 40 985 985 http://www.samsung.com/ hu ITALIA 199 153 15 3 http://www.samsung.com/it LUXEMBURG 02 261 0 3 710 http://w[...]

S y nc Si g nal Sync (Synchronized) Si gnals refer to the standard signals that are re quired to display des ired colors on the monitor. They a re divided into Vertic al and Horizontal Sync Signals. These sig nals display normal color images b y the set resolution an d frequency. Types of Sync Signals Separate Th is is a schem e of transmitting in [...]

Short for "Super Video." S-Vide o allows up to 800 lines of horizontal resolution, enab ling high-quali ty video. V HF/UHF VHF indicate s TV channels 2 to 13, and UHF ind icates channels 14 through 69. Channel Fine Tunin g This feature al lows the viewer to fine-tune the TV ch annel to obtain the best viewing conditions. The Samsung LCD T[...]

2. TFT LCD pane l manufacture d by using adva nced semicond uctor technolog y with precision of 1ppm (one million th) above is used for this product. Bu t the pixels of RED, GREEN, BLUE and W HITE color seem to be bri ght sometimes or so me of black pix els could be seen . This is not from bad qua lity and yo u can use it wit hout unea siness. { Fo[...]

MÉXICO IMPORTADO POR: SAMSUNG EL ECTRONICS MÉXICO. S.A. de C.V. Vía Lopez Po rtillo No. 6, Col. San Fco . Chilpan Tultitlán, E stado de M éxico, C.P. 54 940 Tel: 01-55 -5747-5100 / 01-800-726-7864 EXPORTADO POR: Samsung Electronic s CO.,LTD. 416, Mae tan -3dong, Yeong tong - gu, Suwon City, Gyeo nggi-do Ko rea[...]

PRODUCT INFORMATION (Image Retention Free) LCD Monitors and TVs may have image retentio n when switching from one image to anothe r especially after displaying a statio nary image for a long time. This guide is to de monstrate correct usage of LCD products in order to protect them from Image retention. What is Ima g e retention ? During normal oper[...]

The best way to protect your monitor from Image retention is to set your PC or S y stem to o p erate a Screen Sa ver p ro g ram when y ou are not usin g it. Image retention may no t occur when a LCD panel is opera ted under normal conditio ns. Normal conditions are defined as continuously changi ng video patterns. When the LCD panel is operated for[...]

Correct Disposal of This Product (Waste Electrical & E lectronic Equipment) - Europe only (Applicable in the European Union and other European countries w ith separate collection systems ) This marki ng shown on t he product or its literature, in dicates that i t should not be disposed w ith other hous ehold wastes at the end of it s working li[...]