Samsung DM48D manual

LFD DISPLA Y User Manual The color and the appearance ma y dier depending on the product, and the specications are subject to change without prior notice to improv e the per formance . DM32D DM40D DM48D DM55D[...]

T able of con tents Befor e Using the P roduct » Copyright » Safety Precautions Pr eparations » Parts » Before Installing the Pr oduct (Installation Guide) » Dimensions » Using the COVER- JACK » Installing the W all Mount » Remote Control (RS232C) Connecting and Using a Source Device » Before C onnecting » Connecting to a PC » Connecting[...]

T able of con tents Sound Adjustment » Sound Mode » Sound Effect » HDMI Sound » Sound on Video Call » Speaker Settings » Auto V olume » Reset Sound Channel » Auto P rogram » Antenna » Channel List » Edit Channel » Edit F avorites » Audio Options » Prog ram Rating Lock » Channel Settings Network » Network Status » Network Settings ?[...]

T able of con tents T roubleshooting Guide » Requirements Befor e Contacting Samsung Customer Service Center » Q & A Specifications » General » Po werSaver » Preset T iming Modes Appendix » Responsibility for the Pa y Ser vice (Cost t o Customers) » Optimum Picture Quality and Afterimage Burn-in Prev ention » License » T erminology[...]

Befor e Using the P roduc t C opyrigh t The contents of this manual are subject to change without notice to impr ove quality . © 2014 Samsung Electronics Samsung Electronics owns the copyright for this manual . Use or reproduction of this manual in parts or entirety without the authorization of Samsung Elec tronics is pr ohibited. Microsoft, W ind[...]

Safety Pr ecautions Caution RISK OF ELEC TRIC SHOCK DO NOT OPEN Caution : TO REDUCE THE RISK OF ELEC TRIC SHOCK, DO NOT REMOVE COVER. (OR BACK) THERE ARE NO USER SER VICEABLE P ARTS INSIDE. REFER ALL SER VICING TO QU ALIFIED PERSONNEL. This symbol indicates that high voltage is pr esent inside. It is dangerous to make any k ind of contact with any [...]

Stor age Due to the characteristics of high-glossy products, using a UV humidifier nearby may create white- colored stains on the product. ― Contact Customer Service Center if the inside of the product needs cleaning (ser vice fee will be charged). Electricit y and Safety ― The following images ar e for ref erence only . Real-life situations ma[...]

Caution Do not disconnect the power cord while the product is being used. • The product may become damaged by an electric shock. ! Only use the power cord pr ovided with your product by Samsung . Do not use the power cord with other pr oducts. • A fire or electric shock may result. ! Keep the power socket where the power cord is connected unobs[...]

! Bend and keep par t of the outdoor T V antenna cable hanging down wards (the part inside the room) to prevent rainwater fr om entering the product. • If rainwater enters the product, a fire or electric shock can occur . ! When using an outdoor antenna, be sure t o install the antenna away from nearby power lines to prev ent the antenna from col[...]

Caution ! Do not drop the product while moving. • Pr oduct failure or personal injur y may result. Do not set down the product on its front. • The screen may become damaged . When installing the product on a cabinet or shelf , make sure that the bottom edge of the front of the pr oduct is not protruding. • The product may fall and become dama[...]

Do not leave heavy objects or items that children like (toys, sw eets, etc.) on top of the product. • The product or heavy objects may fall as children try to reach for the toys or sweets r esulting in a serious injur y . ! During a lightning or thunderstorm, remove the power cable and do not touch the antenna cable. • A fire or electric shock [...]

Caution ! Leaving the scr een fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. • Activate power-sa ving mode or a moving-picture screen saver if y ou will not be using the product for an extended period of time. -_- ! Disconnect the power cord from the po wer socket if you do not plan on[...]

Be careful that children do not place the battery in their mouths when removed fr om the remote control . Place the battery in a location that children or infants cannot reach. • If children have had the battery in their mouths, consult your doctor immediately . When replacing the battery, insert it with the right polarit y (+, -). • Other wise[...]

- Contact the vendor where you purchased the product if any components are missing. - The appearance of the components and items sold separately may diff er from the image shown. - A stand is not provided with the product. T o install a stand, you can purchase one separately . Checking the Components Componen ts ― Components may differ in diff er[...]

Items sold separately - The following items can be pur chased at your nearest retailer . W all-mount Kit Stand RS232C-Stereo cable DVI cable HDMI-DVI cable DP cable HDMI cable Video cable Ster eo cable Component cable RCA stereo cable RCA cable A V/Component adapter AUDIO adapt er RS232C(OUT ) adapter LAN cable Network Box DP-DVI cable (Used to con[...]

P ar ts C ontrol P anel POWER ON POWER P anel Key Speaker Remote sensor ― The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to impr ove quality. P anel Key Buttons Description Po wer on the product. If you press the button when the product is turned on, the control menu will be display[...]

― If you press the button on the panel key when the product is turned on, the control menu will be displayed . Con trol menu Return Buttons Description Sou rce Select the connected input source. Move the panel key right to select S ource in the control menu. When the list of input sources is displayed , move the panel key left or right to select [...]

Reverse Side ― The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality . RGB IN RJ45 POWER ANT IN DP OUT COMPONENT IN DVI IN / MAGICINFO IN RGB / DVI / HDMI / A V / COMPONENT / AUDIO IN HDMI IN AUDIO OUT RS232C OUT RS232C IN USB SD CARD DP IN IR /AMBIENT SENSOR IN IR OUT P[...]

Anti-theft Lock ― An anti-theft lock allows you to use the product securely even in public places . ― The locking device shape and lock ing method depend on the manufacturer . Refer to the user guide provided with your anti-theft locking device for details. ― The following images ar e for ref erence only . Real-life situations may differ from[...]

- Remote control button functions may differ for diff erent products. Remote C ontrol ― Using other display devices in the same space as the remote contr ol of this product can cause the other display devices to be inadvertently controlled. ― A button without a description in the image below is not supported on the product. HOME MENU POWER OFF [...]

TOOLS INFO SET UNSET LOCK PC A DVI B HDMI C DP D EXIT RETURN IR control Display information about the current input source. Move to the upper , lower , left or right menu, or adjust an option's setting. Confirm a menu selection. Exit the current menu. In TV mode , configure settings such as the program guide f or digital channels. In other mod[...]

C onnec tion Using an IR S tereo C able (sold separat ely) Make sure to connect the External ambient sensor while the product is powered off . Then, power on the pr oduct. Con trolling more than one displa y product using your r emote contr ol • Connect the IR OUT por t on the product to the IR / AMBIENT SENSOR IN port on the other display produc[...]

Befor e Installing the Pr oduc t (Installation Guide) 15 ˚ T o prevent injury, this apparatus must be securely attached t o the floor/wall in accordance with the installation instructions. • Ensure that an authorized installation company installs the wall mount. • Other wise, it may fall and cause personal injury. • Make sure to install the [...]

A B C E Figur e 1.3 Side view D D Figur e 1.2 Side view Installation on an Indented W all ― Contact Samsung Customer Service Center for further details. Plane view A Minimum 40 mm B Minimum 70 mm C Minimum 50 mm D Minimum 50 mm E Ambient temperature: Under 35 C ― When installing the product on an indented wall, allow at least the space specifie[...]

Using the C OVER- JA CK T o prevent theft of the SD memor y card or an y other USB device, install the COVER- JACK. ― When using a DVI cable, make sure to cut off the side of the COVER- JACK first. ― Cut out the Cover -Jack accor ding to the DVI cable size befor e use.[...]

Installing the W all Mount Installing the W all M ount Kit The wall mount kit (sold separately) allows you to mount the product on the wall. F or detailed information on installing the wall mount, see the instructions provided with the wall mount. We r ecommend you contact a technician for assistance when installing the wall mount bracket. Samsung [...]

Unit: mm (inches) Model name VESA screw hole specs (A * B) in millimeters Standard Screw Quantity DM32D 200 × 200 (7.9 × 7.9) M8 / L14~16 4 DM40D DM48D 400 × 400 (15.7 × 15.7) DM55D ― Do not install your W all Mount K it while your product is turned on. It may result in personal injury due to elec tric shock.[...]

Remote C ontr ol (RS232C) Cable C onnec tion RS232C Cable Interface RS232C (9 pins) Pin T xD (No.2), RxD (No.3), GND (No .5) Bit rate 9600 bps Data bits 8 bit Parity None Stop bit 1 bit Flow c ontrol None Maximum length 15 m (only shielded type) • Pin assig nment 1 2 3 4 5 6 7 8 9 Pin Signal 1 Detect data carrier 2 Received data 3 T ransmitted da[...]

• RS232C cable Connector: 9-Pin D-Sub to Stereo Cable 1 5 9 6 -P2- 1 2 3 -P1- -P1- -P1- -P2- -P2- F emale Rx Tx Gnd 2 3 5 --------> <-------- ---------- 3 2 5 Tx Rx Gnd STEREO PL UG (3.5ø) LAN Cable • Pin assig nment 12345678 Pin No Standard C olor Sig nal 1 White and orange TX+ 2 Orange T X- 3 White and green RX+ 4 Blue NC 5 White and b[...]

• Connector : RJ45 Direct LAN cable (PC to HUB) RJ45 RJ45 MDC HUB P1 P1 P2 P2 Signal P1 P2 Signal TX+ 1 <--------> 1 TX+ T X- 2 <--------> 2 T X- RX+ 3 <--------> 3 RX+ R X- 6 <--------> 6 RX- Cross LAN cable (PC to PC) RJ45 P1 P2 Signal P1 P2 Signal TX+ 1 <--------> 3 RX+ T X- 2 <--------> 6 R X- RX+ 3 <---[...]

C onnec tion • Connection 1 RS232C IN OUT RS232C IN OUT RS232C IN OUT RS232C IN OUT • Connection 2 RJ45 RJ45 • Connection 3 RS232C OUT RJ45 RS232C IN OUT RS232C IN OUT RS232C IN OUT[...]

C ontrol C odes V iewing contr ol state ( Get contr ol command) Header Command ID Data length Checksum 0xAA Command type 0 Con trolling (Set contr ol command) Header Command ID Data length Data Checksum 0xAA Command type 1 Value Command N o. Command type Command V alue range 1 Po wer control 0x11 0~1 2 Volume contr ol 0x12 0~100 3 Input source cont[...]

P ow er contr ol • F unction A product can be powered on and off using a PC. • Viewing power state ( Get Power ON / OFF Status) Header Command ID Data length Checksum 0xAA 0x11 0 • Setting power ON/Off (Set Power ON / OFF) Header Command ID Data length Data Checksum 0xAA 0x11 1 "Po wer" "Po wer": P ower code to be set on a[...]

Input source c ontrol • F unction The input source of a product can be changed using a PC. • Viewing input source state (Get Input Source Status) Header Command ID Data length Checksum 0xAA 0x14 0 • Setting the input source (Set Input Source) Header Command ID Data length Data Checksum 0xAA 0x14 1 "Input Source" "Input Source&q[...]

Screen mode contr ol • F unction The screen mode of a product can be changed using a PC. Screen mode cannot be controlled when the V ideo W all function is enabled. ― This control can only be used on models that include a T V. • Viewing screen status (Get Screen Mode Status) Header Command ID Data length Checksum 0xAA 0x18 0 • Setting the p[...]

PIP On/Off control • F unction The PIP mode of a product can be turned on or off using a PC. ― Only available on models that have the PIP function. ― The mode cannot be controlled if V ideo W all is set to On . ― This function is not available in MagicInfo . • Viewing PIP on/off state (Get the PIP ON / OFF Status) Header Command ID Data l[...]

V ideo W all Mode Contr ol • F unction Video W all mode can be activated on a product using a PC. This control is only available on a pr oduct whose Video W all is enabled. • Viewing video wall mode (Get Video Wall Mode) Header Command ID Data length Checksum 0xAA 0x5C 0 • Setting the video wall (Set V ideo Wall Mode) Header Command ID Data l[...]

V ideo W all On • F unction T urn Video W all on or off on the product from your computer . • Get Video W all On/Off Status Header Command ID Data length Checksum 0xAA 0x84 0 • Set Video W all On/Off Header Command ID Data length Data Checksum 0xAA 0x84 1 V.W all_On • V .Wall_On: Video Wall code to be assigned to the pr oduct 1: Video W all[...]

10x10 V ideo W all Model 123456789 10 11 12 13 14 15 O 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 1 0x11 0x12 0x13 0x14 0x15 0x16 0x17 0x18 0x19 0x1A 0x1B 0x1C 0x1D 0x1E 0x1F 2 0x21 0x22 0x23 0x24 0x25 0x26 0x27 0x28 0x29 0x2A 0x2B 0x2C 0x2D 0x2E 0x2F 3 0x31 0x32 0x33 0x34 0x35 0x36 0x37 0x38 0x39 0x3A 0x3B 0x3C 0[...]

W all_SNo: Product Number code assigned to the pr oduct 10x10 Video W all Model : ( 1 ~ 100) Set Number Data 1 0x01 2 0x02 ... ... 99 0x63 100 0x64 • Ack Header Command ID Data length Ack/Nak r -CMD V al1 Val2 Checksum 0xAA 0xFF 4 'A' 0x89 Wall_Div W all_SNo • Nak Header Command ID Data length Ack/Nak r-CMD V al1 Checksum 0xAA 0xFF 3 [...]

C onnec ting and U sing a Sourc e Devic e Befor e C onnec ting Pr e - connection Check points ― Before connecting a source device , read the user manual provided with it. The number and locations of ports on source devices may differ from device to device. ― Do not connect the power cable until all connections are completed. Connecting the powe[...]

C onnec tion using a DVI cable (Digital type) DVI IN / MA GICINFO IN RGB / DVI / HDMI / A V / COMPONENT / A UDIO IN C onnec tion Using an HDMI-D VI Cable ― When you connect a PC to the product using an HDMI-DVI cable, set Edit Name to DVI PC to access video and audio content stored on the PC. HDMI IN RGB / DVI / HDMI / A V / COMPONENT / A UDIO IN[...]

C onnec tion Using an HDMI C able HDMI IN C onnec tion Using an DP C able DP IN • Pr ecautions for using DP ― T o increase the standby power capacity , the product stops DP communication when it is turned off or in power-saving mode . If the product in dual monitor mode is turned off or goes into power-saving mode, monit or setting changes may [...]

C onnec ting to a V ideo Devic e • Do not connect the power cable before connecting all other cables. Ensure you connect a source device first bef ore connecting the power cable. • Y ou can connect a video de vice to the product using a cable. ― Connecting par ts may diff er in different pr oducts. ― Pr ess the SOURCE button on the remote c[...]

C onnec tion Using an HDMI-D VI Cable ― Audio will not be enabled if the product is connected to a video device using an HDMI-DVI cable. T o resolve this , additionally connect an audio cable to the audio por ts on the product and video device. When you connect a video device to the product using an HDMI-DVI cable, set Edit Name to DVI Devices to[...]

C onnec ting to an A udio Sy stem ― Connecting par ts may diff er in different pr oducts. A UDIO OUT C onnec ting the ant enna ― Connecting par ts may diff er in different pr oducts. ― When the product is powered on f or the first time, basic settings are configur ed automatically . T ake extra care to ensure the wires inside the ant enna cab[...]

C onnec ting the LAN Cable ― Connecting par ts may diff er in different pr oducts. RJ45 • Use Cat7(*STP Type) cable for the connection. *Shielded T wist Pair[...]

C onnec ting the network bo x (Sold separately) ― F or details on how to connect to a network box, refer t o the user's manual provided with the network box upon purchase . MagicInfo T o use MagicInfo , a network box (sold separately) must be connected to the product. ― T o change the MagicInfo settings, run "Magicinf oSetupWizard&quo[...]

MagicInfo Setup Wizard - v .1.12 Select TCP/IP - step 2 Obtain an IP address automatically Use the following IP address: IP address: Subnet mask: Default gateway: 192 . 168 . 0 . 102 255 . 255 . 255 . 0 192 . 168 . 0 . 1 Obtain DNS server address automatically Use the following DNS server address: Preferred DNS server: Alternate DNS server: 10 . 44[...]

Changing the Input sourc e So urce SOURCE → Sou rce Source USB HDMI AV Component DVI PC T o go to Options, press and hold the Enter button. - The displayed image may diff er depending on the model. - DM32D Model Only Source HDMI AV Component PC DisplayPort TV T o go to Options, press and hold the Enter button. - The displayed image may diff er de[...]

U sing MDC MDC Pr ogram Installation/Uninstallation Installation ― MDC installation can be affected by the graphics car d, mother board and network conditions. 1 Click the MDC Unified installation program. 2 Select a language for installation. Next, click " OK ". 3 When the " W elcome to the InstallShield Wizard for MDC_Unified &qu[...]

C onnec ting to MDC Using MDC via RS-232C (serial data c ommunications standards) An RS-232C serial cable must be connected to the serial por ts on the PC and monitor . RS232C IN RS232C OUT Monitor 1 Monitor 2 Computer[...]

Using MDC via Ethernet Enter the IP for the primary display device and connect the de vice to the PC. Display devices can be connected to each other using a LAN cable . Connection using a direct LAN cable ― Multiple products can be connected using the RJ45 por t on the product and the LAN ports on the HUB. RJ45 HUB Monitor 1 Monitor 2 Computer[...]

Connection using a cross LAN cable ― Multiple products can be connected using the RS232C IN / OUT por t on the product. Monitor 1 Monitor 2 Computer RS232C OUT RJ45[...]

Home f eatur e ― T o use the Player f eature, set Pla y via to MagicInfo in Syste m . Play a range of content such as channels with schedules assig ned, templates or files. Play channels or content using an y of the following methods. • Network Channel : Play cont ent using the ser ver . ― T o run Network Channel , make sure the product is co[...]

Appro ving a connected device fr om the ser v er • Set MagicInfo Mode to MagicInfo in Ser ver Network Settings . Approve and use the MagicInf o ser ver now . ― F irst configure the server Network Settings before device approval . 1 Access the server you have assigned to y our device. 2 Enter your ID and passwor d to log in. 3 Select Device from[...]

7 Enter the information requir ed to approv e the device. • Device Name : Enter the device name. • Device Group : Select to specify the group . • Location : Enter the current location of the device . ― Pr essing the INFO button on the remote when a network schedule is running will display the details of the schedule. Check that the correct [...]

Network Channel Play content, templat es and schedules configured on the server . • Y ou can view whether the ser ver is connected (approval) in the Play er menu screen. T o view whether the ser ver is connected when a Network Channel is running, pr ess INFO on the remote. 1 Select Network Channel from the Play er menu. 2 Network Channel will run[...]

A vailable featur es in the Play er page The Play er list page provides the follo wing features . • Device Select either Internal or USB to search for a desir ed device list. - All / Internal / USB • Conten ts Select a content type as cr iterion to search f or a desired content list. - All / Video / Image / PDF / Flash / Office / My T emplate ?[...]

Play er page S ettings menu Settings Settings Aspect Ratio Display Duration Transition Eff ect Content Layout Safely Remove USB Landscape Set whether to display content in the original aspect ratio or full screen size. Close - The displayed image may diff er depending on the model. Aspect Ratio Set Aspect Ratio to either Original or Full . • F ul[...]

When C onten t is Running V iewing the details of the cont ent that is running Information Type: CH Number: CH Name: Software Version: MAC ID: T ags: Server : USB: Schedule download: Network Channel No channels selected No channels selected B2B-EP-MIP-4510 FF-FF-FF-FF-FF-FF None Not connected Not connected No Schedule to download OK - The displayed[...]

Changing the settings for the c ontent tha t is running Music Playlist Picture Mode Sound Mode Repeat - The displayed image may diff er depending on the model. - This feature is not a vailable when content is playing through Video Wall . Pr ess the TOOLS butt on on the remote control during content pla yback to configure settings such as Picture Mo[...]

F ile F ormats Compa tible with Play er • Supported file systems include F A T32 and NTFS. • A file with a vertical and horizontal resolution larger than the maximum resolution cannot be played. Check the vertical and horizontal resolution of the file. • Check the supported video and audio Codec types and V ersions. • Check the supported fi[...]

Con tents F ile Extension Container V ideo Codec R esolution F rame ra te (fps) Bit rat e (Mbps) Audio C odec *.avi *.mkv *.asf *.wmv *.mp4 *.mov *.3gp *.vro *.mpg *.mpeg *.ts *.tp *.trp *.v *.vob *.svi *.m2ts *.mts *.divx AV I MKV ASF MP4 3GP VRO VOB PS TS DivX 3.11 / 4.x / 5.x / 6.x 1920 x 1080 6~30 30 AC3 LPCM AAC HE-AAC WMA DD+ MPEG(MP3) DT [...]

V ideo Audio Image • 3D video is not supported. • Content with a resolution lar ger than the resolution specified in the table above is not supported. • Video content with a Bit rate or F rame rate larger than the rate specified in the table above can cause choppy video during playback. • Video content will not play , or not play correctly,[...]

Flash P ower P oint PDF • Compatible with Flash 10.1 • Flash Animation - Compatible file format: SWF • Recommended resolution: 960 x 540 - Caution Performance comparable to Flash P layer on a Windows operating system cannot be guaranteed Optimization is needed during content creation • Flash Video - Compatible file format: FL V - Video Code[...]

WORD T emplate les LFD • Compatible document file formats - Extension: .doc, .docx - Version: Office 97 ~ Office 2007 • F unctions not suppor ted - P age background effect - Some paragraph styles - Wor d Art - Align A group alignment err or may occur - 3D shapes (which will be displayed in 2D) - Office 2007 SmartAr t is not fully suppor ted.[...]

F ile F ormats Compa tible with V ideo W all ― Refer to the < MagicInfo Server user's manual> for further details. V ideo Image • 3D video is not supported. • Content with a resolution lar ger than the resolution specified in the table above is not supported. • Video content with a Bit rate or F rame rate larger than the rate spe[...]

Restrictions • Only one video ( Videos ) file can be pla yed per client. ― Different cont ent files can be played on the displays of a video wall. T wo video ( Videos ) files cannot be pla yed on a single display of a video wall. Available A vailable Not available[...]

Schedule HOME → Schedule → ENTER E 12:00 am 12:30 am 01:00 am 01:30 am 02:00 am 02:30 am 03:00 am 03:30 am 04:00 am 04:30 am 05:00 am 05:30 am Add content to create a program on the channel. Configure the display duration to set how long each item of content will play for . Set a start time and a stop time for the program. Playing Time [CH1]Chn[...]

Configuring channel schedules Play media content such as videos , photos and music at a desired time. 1 Select a channel to configure. 2 Select video, music and photo content you want to apply t o the channel schedule. 3 Set the time to play the schedule. ( Start Time ~ Stop T ime ) 4 Change the channel schedule name, and then select a destination [...]

T empla te HOME → T emplate → ENTER E My template Market: All Layout: Landscape 1 / 64 item(s) Select a template to customize. T emplate - The displayed image may diff er depending on the model. - The T emplate function is disabled if Video W all is set to On . A vailable f eatures in the T emplate page Create unique content using t emplates. I[...]

2 Organize a templat e by inserting tex t, video, phot o, or PDF files as desired . Entering te xt New town interior design Sustainble evolution unfolods tomorrw’s design Background Screen Background Music Select in the editable zone to add content or edit the existing text. T emplate Preview Cancel Save Edit T ex t Font Options Edit T ext Select[...]

Preview New town interior design Sustainble evolution unfolods tomorrw’ s design T emplate preview is running. It will disappear after 20 seconds. 1 Pr eview the created template using the Pr eview feature. 2 T o save the template , press the Save button. 3 Configure T emplate Name and Storage . Save Duration T emplate Name Storage 23:59:59 T emp[...]

Clone P roduct HOME → Clone Product → ENTER E Clone Pr oduct - The displayed image may diff er depending on the model. Export the product settings to a USB device or load the settings via a USB de vice. This option is useful when assigning the same settings to several pr oducts. When USB does not contain a duplica te le 1 Connect the USB dev[...]

ID Settings HOME → ID Settings → ENTER E ID Settings - The displayed image may diff er depending on the model. Assign an ID to a set. Pr ess u / d to select a number , and press E . Device ID Enter the ID number of the product connected to the input cable for input sig nal reception. (Range: 0~224) ― Enter the number you want using the number[...]

V ideo W all HOME → Video W all → ENTER E Video W all - The displayed image may diff er depending on the model. Customize the lay out of multiple displays that are connected to f orm a video wall. In addition, display par t of a whole picture or repeat the same picture on each of the connected multiple displays. T o display multiple images, ref[...]

V ideo W all Y ou can activate or deac tivate V ideo W all . T o organize a video wall, select On . • Off / On Horizontal x V er tical This featur e automatically splits a videowall display based on a videowall matrix configuration. Enter the videowall matrix. The videowall display is split based on the configured matrix. The number of vertical o[...]

Natwork S tatus HOME → Natwork Status → ENTER E Natwork Status - The displayed image may diff er depending on the model. Check the current network and Internet connec tion.[...]

Picture Mode HOME → Picture Mode → ENTER E Picture Mode - The displayed image may diff er depending on the model. Select a picture mode ( Picture Mode ) suitable for the environment wher e the product will be used. • Shop & Mall Suitable for shopping malls. - Select either Video/Image or Te x t depending on the pic ture mode . • Office [...]

On/O  T imer HOME → On/O ff T imer → ENTER E On/Off Timer - The displayed image may diff er depending on the model. ― Y ou must set the clock before you can use On/Off Timer . On Timer Set On Timer so that your pr oduct turns on automatically at a time and on a day of your choosing. The power is turned on with the specified volume or input[...]

O Timer Set the off timer ( Off Timer ) by making a selec tion from one of the seven options . ( Off Timer 1 ~ Off Timer 7 ) • Setup : Select O ff , Once , E ver yday , Mon~Fri , Mon~Sat , Sat~Sun or Manual . If you select Manual , you can choose the days you want Off Timer to turn off your product. - The check mark indicates days you ’ve se[...]

T icker HOME → Ticker → ENTER E Ticker - The displayed image may diff er depending on the model. Input text while a video or image is displayed and display the text on the screen. • Off / On • Message : Enter a message to display on the screen. • Time : Set the Start Time and End T ime to display a Message . • F ont Options : Specify th[...]

URL Launcher HOME → URL Launcher → ENTER E URL Launcher 12:00 Play various contents sych as scheduled channels, templates or files. Change URL pm January 1 2014 Clone Product Picture Mode ID Settings On/Off Timer Video Wall Ticker Network Status More settings - The displayed image may diff er depending on the model. F or details on how to use t[...]

Screen A djustment Configure the Picture settings ( Backlight , Color T one , etc.). The layout of the Picture menu options may vary depending on the product. Picture Mode MENU m → Picture → Picture Mode → ENTER E · · · · · · Picture Picture Mode Backlight Contrast Brightness Sharpness Color Tint ( G/R) T erminal & Station 100 70 45[...]

Back light / C ontrast / Brightness / Sharpness / C olor / Tin t ( G/R) MENU m → Picture → ENTER E · · · · · · Picture Picture Mode Backlight Contrast Brightness Sharpness Color Tint ( G/R) T erminal & Station 100 70 45 65 50 G50 R50 - The displayed image may diff er depending on the model. Y our product has several options for adjust[...]

C olor T emper ature MENU m → Picture → Color T emperature → ENTER E Picture Color T emperature 10000K - The displayed image may diff er depending on the model. Adjust the color temperature (Red / Gr een / Blue). (Range: 2800K–16000K ) ― If Color T one is set to Off , Color T emperature is disabled. ― If Picture Mode is set to Calibrati[...]

Whit e Balance MENU m → Picture → White Balance → ENTER E Picture White Balance - The displayed image may diff er depending on the model. 2 P oint Adjust the color temperature f or a more natural picture. • R-Offset / G- Offset / B-O ffset : Adjust each color’ s (red, green, blue) darkness. • R-Gain / G- Gain / B-G ain : Adjust each col[...]

Gamma MENU m → Picture → Gamma → ENTER E Picture Gamma 0 - The displayed image may diff er depending on the model. Adjust the primary color intensit y . ― If Picture Mode is set to Calibration , Gamma is disabled. Calibr at ed V alue MENU m → Picture → Calibra ted V alue → ENTER E Picture Calibrated V alue - The displayed image may di[...]

A dvanced Settings MENU m → Picture → Advanc ed Settings → ENTER E Advanc ed Settings Dynamic Contrast Black T one Flesh T one RGB Only Mode Color Space Motion Lighting Medium Darker 0 O Native O - The displayed image may diff er depending on the model. Picture Mode P icture Mode settings Adjustable options Shop & Mall , Office &[...]

Advanc ed Settings Dynamic Contrast Black T one Flesh T one RGB Only Mode Color Space Motion Lighting Medium Darker 0 O Native O - The displayed image may diff er depending on the model. Dynamic Contr ast Adjust the screen contrast. • Off / Low / M edium / High Black T one Select the black level to adjust the screen depth. • Off / Dark / [...]

Picture Options MENU m → Picture → Picture Options → ENTER E Picture Options Color T one Digital Clean View MPEG Noise F ilter HDMI Black Lev el F ilm Mode Dynamic Back light O O O Normal O O - The displayed image may diff er depending on the model. Picture Mode Picture Mode settings Adjustable options Shop & Mall , Office [...]

Picture Options Color T one Digital Clean View MPEG Noise F ilter HDMI Black Lev el F ilm Mode Dynamic Back light O O O Normal O O - The displayed image may diff er depending on the model. C olor T one If the input source is PC , DVI or HDMI (PC connection), DisplayPort . • Off / Cool / Standard / W arm If the input source is AV , [...]

Picture Options Color T one Digital Clean View MPEG Noise F ilter HDMI Black Lev el F ilm Mode Dynamic Back light O O O Normal O O - The displayed image may diff er depending on the model. HDMI Black Lev el Selects the black level on the screen to adjust the screen depth. • Low / Normal ― Available only in HDMI and DVI mode (A V [...]

Picture Siz e MENU m → Picture → Picture Size → ENTER E · Picture Siz e Picture Size 16:9 P osition Resolution O - The displayed image may diff er depending on the model. choose size and aspect ratio picture displayed on screen. Picture Size ― Different scr een adjustment options are displayed depending on the curr ent input source. •[...]

P osition · Picture Siz e Picture Size Custom P osition Resolution O - The displayed image may diff er depending on the model. Adjusts the picture position. P osition is only available if P icture Size is set to Zoom1 , Z oom2 , Wide F it , Screen F it or Custom . ― T o use the Position function after selecting Zoom1 , Zoom2 , W ide Fit , Scr[...]

Resolution If the picture is not normal even when the resolution of the graphics card is one of the follo wing, you can optimize the picture quality by selecting the same resolution for the product as the PC using this menu. Available resolutions: Off / 1024x768 / 1280x768 / 1360x768 / 1366x768[...]

A uto A djustment MENU m → Picture → Auto A djustment → ENTER E Picture Auto A djustment - Available in PC mode only . - The displayed image may diff er depending on the model. Adjust frequency values/positions and fine tune the settings automatically . PC Screen A djustment MENU m → Picture → PC Screen Adjustment → ENTER E Picture PC S[...]

Picture O MENU m → Picture → Picture Off → ENTER E Picture Picture O - The displayed image may diff er depending on the model. Selecting Picture Off switches off the screen. The volume is not disabled. T o switch the screen on, press an y button other than the volume button. Reset Picture MENU m → Picture → Reset Picture → ENTER E[...]

OnS cr een Display PIP MENU m → OnScreen Display → PIP → ENTER E OnScreen Display PIP Rotation Screen Pr otection Message Display Menu T ransparency Menu Language Caption Medium English O - The displayed image may diff er depending on the model. - F or PIP sound, ref er to the Sound Select instructions. - If you turn the product off while [...]

PIP PIP Source Antenna Channel Size Position Sound Select On TV Air Air 4 Õ Ã Main OK - The displayed image may diff er depending on the model. • PIP ( Off / On ): Activate or deactivate the PIP function. • Sou rce : Y ou can select a source of the sub picture. • Antenna ( Air / Cable ): Select either Air or Cable as the input source for th[...]

Rotation MENU m → OnScreen Display → Rotation → ENTER E Rotation Rotate Menu Rotate Cont ent Aspect Ratio Landscape Landscape F ull Screen - The displayed image may diff er depending on the model. Rotate Menu Configure the menu scr een. • Landscape : Display the menu in landscape mode (default). • Portrait : Display the menu in portrait m[...]

Screen P rot ec tion MENU m → OnScreen Display → Screen Pr otection → ENTER E Screen P rotection Auto P rotection Time Screen Burn Pr otection O - The displayed image may diff er depending on the model. Aut o Pr otection Time If the screen displays a still image for a certain period of time you define, the product activates the screen save[...]

Screen Burn Pr otection Pix el Shift Timer Immediate Display Side Gray O O - The displayed image may diff er depending on the model. Timer Y ou can set the timer for Screen Burn Prot ection . The Screen Burn Pr otection feature stops automatically after a specified period of time. Timer Off Repeat : Display the image retention-pr eventive pat[...]

Screen Burn Pr otection Pix el Shift Timer Immediate Display Side Gray O O - The displayed image may diff er depending on the model. Immediate Display Select the screen saver you want to display immediat ely . • Off / Pixel / Rolling Bar / F ading Screen Side Gray When the screen is set to 4:3 aspect ratio, adjust the brightness of white ma[...]

Menu T ranspar enc y MENU m → OnScreen Display → Menu T ransparency → ENTER E OnScreen Display Menu T ransparency Medium - The displayed image may diff er depending on the model. Adjust transparency of menu box. • High / Medium / Low Menu Language MENU m → OnScreen Display → Menu Language → ENTER E OnScreen Display Menu Language Engli[...]

Caption MENU m → OnScreen Display → Caption → ENTER E Caption Caption Caption Mode Digital Caption Options O Default - The displayed image may diff er depending on the model. Caption Y ou can switch the caption function on or off. If captions are not available, they will not be displayed on the scr een. • Off / On ― The Caption f eatur[...]

Caption Caption Caption Mode Digital Caption Options O Default - The displayed image may diff er depending on the model. Digital Caption Options (digital channels only) Configure the subtitle settings such as size and color . Adjusts the each option. When done, select Close . • Size : Options include Default , Small , Standard and Lar ge . The[...]

Reset OnScreen Display MENU m → OnScreen Display → Reset OnScreen Display → ENTER E OnScreen Display Reset OnScreen Display - The displayed image may diff er depending on the model. This option returns the current settings under OnScreen Display to the default factory settings.[...]

Sound Adjustmen t Configure the sound ( Sound ) settings for the pr oduct. Sound Mode MENU m → Sound → Sound Mode → ENTER E Sound Sound Mode Sound Eect HDMI Sound Sound on Video C all Speaker Settings Auto V olume Reset Sound Standard A V(HDMI) Current Sour ce O - The displayed image may diff er depending on the model. Y ou can select a[...]

Sound Eect MENU m → Sound → Sound Effect → ENTER E Sound Eect Virtual Surround Dialog Clarity Equalizer O O - The displayed image may diff er depending on the model. Configure your pr eferred sound eff ect for output sound. ― If Speaker Settings is set to External , Sound Effect is disabled. ― Available only when Sound Mode is[...]

HDMI Sound MENU m → Sound → HDMI Sound → ENTER E Sound HDMI Sound A V(HDMI) - The displayed image may diff er depending on the model. Select whether to hear from A V(HDMI) or PC(DVI) . • A V(HDMI) / PC(DVI) Sound on V ideo Call MENU m → Sound → Sound on V ideo Call → ENTER E Sound Sound on Video C all Current Source - The displayed im[...]

Speaker Settings MENU m → Sound → Speaker Settings → ENTER E Sound Speaker Settings - The displayed image may diff er depending on the model. T V S ound Output If you are listening to the sound track of a broadcast or mo vie through an external receiver , you may hear a sound echo caused by the differ ence in decoding speed between the produc[...]

Reset Sound MENU m → Sound → Reset Sound → ENTER E Sound Reset Sound - The displayed image may diff er depending on the model. The displayed image may diff er depending on the model. Reset all sound settings to the factory defaults.[...]

Channel Configure the Channel settings f or the product. Available in TV mode only. A uto P rog ram MENU m → Channel → Auto P rogram → ENTER E Channel Auto P rogr am Antenna Channel List Edit Channel Edit F avorites Audio Options Pr ogram Rating Lock Air On - The displayed image may diff er depending on the model. - Available in TV mode only.[...]

Ant enna MENU m → Channel → Antenna → ENTER E Channel Antenna Air - The displayed image may diff er depending on the model. - Available in TV mode only. Before y our television can begin memorizing the available channels, you must specify the type of signal sour ce that is connected to the LED display . • Air / Cable[...]

Channel List MENU m → Channel → Channel List → ENTER E Channel Channel List - The displayed image may diff er depending on the model. - Available in TV mode only. Register or delete channels. A dd favorite channels or rename analog channels . Select a desired channel from Channel List to view the channel instantly . ― T o navigate Channel L[...]

Edit Channel MENU m → Channel → Edit Channel → ENTER E Channel Edit Channel - The displayed image may diff er depending on the model. - Available in TV mode only. Manage channels saved on your T V. Delete channels , re-register deleted channels or rename analog channels . Icons f ound in the edit channel page • A : Analog channel • * : A [...]

Editing regist ered channels Select Options from the edit channel page. The following functions are provided in the page. P rovided functions may var y depending on the broadcast signal . Option Name Operations Select All Select all channels in the Edit Channel page. Deselect All Deselect all channels. Antenna Select either Air or Cable as digital [...]

Edit F av orites MENU m → Channel → Edit F avorites → ENTER E Channel Edit F avorites - The displayed image may diff er depending on the model. - Available in TV mode only. Creating a fa vorit e channel list Set frequently viewed channels as favorite channels . F avorite channels are indicated by a symbol in the Edit Channel or Channel List p[...]

Vie wing channels saved under a fa vorite channel list ― F avorite channel lists are only displayed if they have been cr eated previously . When changing the channel using the channel buttons, channels sa ved in favorite channel lists can only be accessed. 1 Select Channel List from the Channel menu. The channel list is displayed. 2 Select a favo[...]

Renaming a favorit e channel list Change the name of a favorite channel list, if requir ed. 1 Select Change F av . from the screen to change the favorite channel list on the right to another desired fa vorite channel list. 2 Select Options from the screen. Sub-menu items are displayed . 3 Select Rename Fa vorites from the sub-menu items . A prompt [...]

A udio Options MENU m → Channel → Audio Options → ENTER E Channel Pr eferred Language Multi- T rack Sound English Stereo - The displayed image may diff er depending on the model. - Available in TV mode only. Pr eferr ed Language (for digital br oadcasts) Use the up and down arrow keys to select a language, and then press E . Digital- T V broa[...]

Pr ogram Rating Lock MENU m → Channel → Prog ram Rating Lock → ENTER E · · · · · Pr ogram Rating L ock Pr ogram Rating Lock On T V Rating Movie Rating (MP AA) Canadian English Rating Canadian F rench Rating Downloadable U .S. Rating - The displayed image may diff er depending on the model. - Available in TV mode only. When turned on, the[...]

• Canadian English Rating : Y ou can block T V programs based on their Anglophone Canadian rating . Canadian English Rating displays a column with locks and the follo wing ratings categories. C : Pr ogramming intended for childr en under age 8. / C8+ : Pr ogramming generally considered acceptable f or children 8 years and over t o watch on their [...]

Channel Settings MENU m → Channel → Channel Settings → ENTER E Channel Channel Settings - The displayed image may diff er depending on the model. - Available in TV mode only. F ine T une (analog channels only) If the reception is clear , you do not have t o fine tune the channel, as this is done automatically during the search and stor e oper[...]

Network Network Sta tus MENU m → Network → Network Status → ENTER E Y ou can check the current network and I nternet status. Network Status Y our wireless network and Internet connection are setup and ready to use. Y ou are connected to the Internet. If you have any problems using online services, please contact your Internet Service Provider[...]

Network Settings ( Wir ed) Connecting to a Wir ed Network There are thr ee ways to attach your pr oduct to your LAN using cable. • Y ou can attach your product to your LAN by connecting the LAN port on the back of your product to an external modem using a LAN cable. See the diagram below . RJ45 The Modem Port on the W all External Modem (ADSL / V[...]

Set the network connec tion to use Internet ser vices such as perform soft ware upgrades . Aut omatic Network Settings ( Wir ed) Connect to the network using a LAN cable. Make sure a LAN cable is connected first. How to set up automa tically 1 Set Network T ype to W ired from the Network Settings page. 2 Pr ess the Connect button to start Network S[...]

Network Setting ( Wir eless) Connecting to a Wir eless Network The LAN Port on the W all Wireless IP sharer (router having DHCP server) LAN Cable Samsung recommends using IEEE 802.11n. When you play video over a network connection, the video may not play smoothly . ― Select a channel for the wireless IP sharer that is not currently being used . I[...]

6 When done, use the right arrow button to mo ve the cursor to Done , and then press E . The network connection screen appears and the verification process starts. ― A connection with the router is established, but the Internet cannot be accessed. 7 When the connection has been verified, the “ Y our wireless network and Internet c onnection are[...]

10 When done, select OK at the bottom of the page, and then press E . The network test screen appears and the verification process starts. 11 When the connection has been verified, the “ Y our wireless network and Internet c onnection are setup and ready to use . ” message appears. WPS(PBC) How to set up using WPS(PBC) If your router has a WPS([...]

T o use this function, your mobile device should be supported by the Wi-Fi Dir ect . W i-Fi Dir ec t MENU m → Network → W i-Fi Direct → ENTER E Set to connect the product to wireless mobile devices. Using this function, you can connect wireless mobile devices with your product directly without a rout er . T o connect your mobile devic e with [...]

Screen Mirroring MENU m → Network → Screen Mirroring → ENTER E Connect a mobile device that suppor ts the mirroring function to the product. This allows the screen and sound from the mobile device to be outputted on the pr oduct. M irroring ref ers to outputting the screen and sound from a mobile device on a display device. ― T o use Screen[...]

Device Name MENU m → Network → Device Name → ENTER E Select or enter a device name. This name can be shown on network remote controls o ver the network .[...]

Sys te m Setup MENU m → Syst em → Setup → ENTER E System Setup T ouch Control Time Source Aut oSwitch Settings P ower C ontrol Eco Solution T emperature Contr ol 77 - The displayed image may diff er depending on the model. Initial settings (Setup) After powering on the product for the first time , configure basic settings such as the language[...]

6 Clock Set Set the current date and time, and then select Next . 7 Play via Select the appropriate player mode depending on the envir onment where you are using the pr oduct. ― The Play via setting step only appears when connected to the network. 8 Setup Complete Congr atulations! Setup is complete and you'r e ready to get started. T o watc[...]

T ouch C ontrol MENU m → Syst em → T ouch Contr ol → ENTER E System T ouch Control - The displayed image may diff er depending on the model. Configure touch contr ol related f eatures. Admin Menu L ock Set the Admin Menu Lock to display the administrat or settings menu when you tap and hold the finger on the screen. • Off / On ― T o use t[...]

T ime MENU m → Syst em → Time → ENTER E Time Clock DST Sleep Timer P ower On Delay O O 0 sec - The displayed image may diff er depending on the model. Y ou can configure Clock Set or Sleep Timer . Y ou can also set the product to automatically turn on or off at a specified time using the Timer function. Clock Set the current year , date[...]

Time Z one Select your time zone. ― This function is only available when the Clock Mode is set to Auto . Time Oset If the current time that has been automatically set is different fr om the actual time, adjust the hour between the inter val -12 hours and +12 hours. ― Time Offset is only available when Clock Mode is set to Auto and when the n[...]

DST Switches the DST (Daylight Saving Time) function on or off. Off / Aut o / Manual • Start Date : Set the star t date of Daylight Saving Time. • End Date : Set the end date of Daylight Saving Time. • Time Offset : Select the correct time offset your timezone. Sleep T imer Automatically shuts off the product after a preset period of time. ( [...]

T urning on the display with Source A utoSwitch On , and the pr evious video source selection is not active, the display will automatically search the diff erent video input sources f or active video. Source A utoSwitch Settings When the Source Aut oSwitch is On , the display video sour ce will automatically be searched f or active video. The Prima[...]

P ow er C ontrol MENU m → Syst em → Pow er Contr ol → ENTER E P ow er Contr ol Auto P ower On PC Module Po wer Max. Po wer Saving Standby Con trol P ower Button Network Standby O On Auto P ower On Only O - The displayed image may diff er depending on the model. Aut o P ower On This featur e automatically turns on the product as soon as [...]

Standby C ontrol Y ou can set the screen standby mode to be applied when an input signal is receiv ed. • Auto Po wer-saving mode will activate if no input signals ar e detected even though a source device is connected to the display . The message No Signal will appear if no source device is connected. • Off The message No Signal will appear if [...]

Ec o Solution MENU m → Syst em → Eco Solution → ENTER E Eco Solution Energy Saving Eco Sensor Screen Lamp Schedule No Signal P ower O Auto P ower O O O O O O - The displayed image may diff er depending on the model. Energy Saving Reduce the power consumption by adjusting the screen brightness. • Off / Low / M edium / Hi[...]

No Signal P ower O Save power b y turning the device off when no signal is received from an y source. • Off / 15 min. / 30 min. / 60 min. ― Disabled when an attached PC is in power saving mode . ― The product will automatically power off at a specified time . The time can be changed as requir ed. Aut o P ower O The product will automati[...]

Device Manager MENU m → Syst em → Device Manager → ENTER E Device Manager Keyboard Settings Mouse Settings - The displayed image may diff er depending on the model. Configure options f or external input devices connec ted to the pr oduct. Keyboar d Settings Configure keyboard connection settings or options for a connected keyboard. Selec t Ke[...]

Mouse Settings Selec t Mouse Configure mouse connection settings or options for connected mouse devices. ― Among connected mouse devices, only one mouse can be used. Mouse Options ― Depending on the countr y . Primary Button Select a button on the mouse that will per form basic functions (click and enter). P ointer Speed Set the mouse pointer s[...]

Pla y via MENU m → Syst em → Play via → ENTER E System Play via MagicInfo - The displayed image may diff er depending on the model. Select the appropriate Play via mode depending on the envir onment where you are using the pr oduct. The home screen may be diff erent depending on the setting. • MagicInfo / URL Launcher Change PIN MENU m → [...]

General MENU m → Syste m → General → ENTER E General Security BD Wise Anynet+ (HDMI-CEC) HDMI Hot Plug DivX ® Video On Demand Game Mode On On On O - The displayed image may diff er depending on the model. Security Safety Lock It sets safe lock function. • Off / On All the menus and buttons of the product and remote contr ol, except f or[...]

An ynet+ (HDMI-CEC ) An ynet+ (HDMI-CEC ) Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung product remote. The Anynet+ system can be used only with Samsung devices that have the An ynet+ feature . T o be sure your Samsung device has this feature , check if there is an Anynet+ log[...]

Aut o T urn O ff Setting an Anynet+ Device to turn Off automatically when the product is turned off. • No / Ye s ― If Auto T urn O ff is set to Ye s , running external devices will turn off at the same time as the product powers off. ― May not be enabled depending on the device. Device sear ch Switching betw een Anynet+ Devic es 1 Pr ess the [...]

T roubleshooting for An ynet+ Pr oblem Possible Solution Anynet+ does not work. • Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. • Check if the Anynet+ device power cor d is properly connected. • Check the Anynet+ device ’ s Video/A udio/HDMI cable connections. • Check whether Anynet+ (HDMI-CEC[...]

Pr oblem Possible Solution The connected device is not displayed. • Check whether or not the device suppor ts Anynet+ functions. • Check whether or not the HDMI cable is properly connected. • Check whether Anynet+ (HDMI-CEC) is set to On in the System menu. • Search Anynet+ devices again. • Anynet+ requir es an HDMI connection. Mak e sure[...]

HDMI Hot Plug This featur e is used to activate the time delay to turn on a DVI/HDMI source device. • Off / On DivX ® V ideo On Demand Shows the registration code authorized f or the product. If you connect to the DivX Ⓡ web site and register using that code , you can download the V OD reg istration file. F or more information about DivX Ⓡ V[...]

Reset Sy stem MENU m → Syste m → Reset System → ENTER E System Reset System - The displayed image may diff er depending on the model. This option returns the current settings under system to the default factory settings.[...]

Suppor t Sof tware Updat e MENU m → Support → S oftware Update → ENTER E The Software Update menu lets you upgrade your pr oduct soft ware to the lat est version. ― Be careful not to turn off the power until the upgrade is complet e. The product will turn off and on automatically after completing the sof tware upgrade. ― When you upgrade [...]

Go to Home to play a variety of content from a memory device or a connec ted network. Play er Search or play channels or content sav ed on devices. Schedule Create content schedules in local channels or edit sa ved channels. T emplate T o create content, select a template . Clone Pr oduct Export the product settings to a USB device or load the sett[...]

V ideo W all Customize the lay out of multiple displays that are connected to f orm a video wall. In addition, display par t of a whole picture or repeat the same picture on each of the connected multiple displays. T o display multiple images, ref er to MDC Help or the MagicInfo user guide. Some models may not support the MagicInfo function. Natwor[...]

Reset All MENU m → Support → Reset All → ENTER E Suppor t Reset All - The displayed image may diff er depending on the model. This option returns all the current settings for a displa y to the default factor y settings.[...]

Pla ying photos , videos and music (Media Play) Play photos , videos or music saved on a storage device. Play a variety of content using the following methods . • Using a USB device: Play media content such as videos, phot os and music from a USB device. • Connecting a storage device: Play media content sav ed on a storage device such as a smar[...]

Compa tible devices with media pla y • Some USB digital cameras, smartphones and audio devices may not be compatible with the product. • Media play is only compatible with USB MSC devices. • MSC device refers t o a Mass Storage Class Bulk-Only T ransport de vice. Examples of MSC devices include Thumb drives, F lash card readers and USB HDDs .[...]

Using a USB devic e Connecting a USB device 1 T urn on your product. 2 Connect a USB device containing photo, music and/or movie files to the USB port on the back or side panel of the product. 3 The Play er page automatically appears as soon as a USB device connects to the product. ― If only one USB device is connec ted, files sa ved on the USB d[...]

Playing media c onten t from a PC/mobile devic e Appro ving a PC/mobile device connection Play photos , videos or music saved on a PC or mobile device. T o play media content from a PC or mobile device on the product, the connection with the PC or mobile device must be approved . ― The media playback featur e is available on any devices that supp[...]

When connected to a home network (DLNA ) Play content sav ed on a device connected to a home network . ― Playing media content using a non-Samsung DLNA server may result in a compatibility issue. ― Playback of some media content shar ed with a PC or mobile device may not be possible depending on the content encoding type or the content file for[...]

Menu items in the media cont ent list page Option Name Oper ations Photos V ideos Music Slide Show Start a slideshow. ― This menu item is not available if Sort by is set to F older . c Encoding Select an encoding language if the title of media content appears corrupted. c Rename Playlist Rename a playlist. c Delete Playlist Delete a playlist. c A[...]

A vailable buttons and f eatur es during photo pla yback Pr essing the E or TOOLS butt on displays the following buttons . The RE TURN button makes the buttons disappear . • Pause / Play Start or stop a slideshow. Using a slideshow , it is possible to play all photos in a folder . • Previous / Next View the previous or next photo. • Settings [...]

A vailable buttons and f eatur es during video playback Pr essing the E or TOOLS butt on displays the following buttons . The RE TURN button makes the buttons disappear . • Pause / Play P ause or play a video. The following f eatures are a vailable in pause mode. Note that sound cannot be heard in pause mode. • Rewind / F ast forward Rewind or [...]

A vailable buttons and f eatur es during music playback Pr essing the E or TOOLS butt on displays the following buttons . The RE TURN button makes the buttons disappear . • Pause / Play P ause or play music. • Rewind / F ast forward Rewind or fast forward music. Speed up playback up to 3x, if requir ed. T o play the previous music file, select [...]

Suppor ted Subtitle and Media play le f ormats Subtitle External Internal • MPEG-4 timed text (.ttxt) • SAMI (.smi) • SubRip (.sr t) • SubViewer (.sub) • Micro DVD (.sub or .txt) • SubStation Alpha (.ssa) • Advanced SubStation Alpha (.ass) • Po werdivx (.psb) • Xsub Container: A VI • SubStation Alpha Container: MK V • Advan[...]

Suppor ted music le f ormats F ile Extension T ype C odec Comments *.mp3 MPEG MPEG1 Audio Layer 3 *.m4a, *.mpa, *.aac, *.3ga MPEG4 AAC *.flac FLAC FLAC The Seek ( jump) func tion is not supported. Supports up to 2 channel Suppor ted V ideo F ormats • Video content will not play , or not play correctly, if ther e is an error in the content or t[...]

F ile Extension Con tainer Video C odec Resolution Fr ame rat e (fps) Bit rat e (Mbps) Audio C odec *.avi *.mkv *.asf *.wmv *.mp4 *.mov *.3gp *.vro *.mpg *.mpeg *.ts *.tp *.trp *.mov *.v *.vob *.svi *.m2ts *.mts *.divx AV I MKV ASF MP4 3GP VRO VOB PS TS DivX 3.11 / 4.x / 5.x / 6.x 1920 x 1080 6~30 30 AC3 LPCM ADMPCM (IMA, MS) AAC HE-AAC WMA DD+ [...]

T r oubleshooting G uide Requirements Bef ore C ontac ting Samsung Cust omer Ser vice C enter Before calling Samsung Cust omer Ser vice Center , test your product as follows. If the problem persists, contact Samsung Customer Service Center . T esting the Pr oduc t Check if your product is operating normally by using the product test function. If th[...]

Check the follo wings. Installation issue (PC mode) The screen keeps swit ching on and o . Check the cable connection between the product and PC, and ensure the connection is secure. Blank spaces are f ound on all four sides of the screen when an HDMI or HDMI-DVI cable is connected to the product and PC. The blank spaces found on the scr een hav[...]

Screen issue The screen is not clear . The screen is blurry. Adjust Coarse and F ine . Remove any accessories (video extension cable, etc) and try again. Set the resolution and frequency to the recommended level . The screen appears unstable and shaky . Check that the resolution and frequency of the PC and graphics card ar e set within a range comp[...]

Screen issue The screen displa y does not look normal. Encoded video content may cause the display to appear corrupted in scenes f eaturing fast moving objects such as in a spor ts event or action video. Low sig nal level or low picture quality may cause the display to appear corrupted. This does not mean the product is defective. A cell phone with[...]

Sound issue The volume is t oo low . Adjust the volume. If the volume is still low after turning it up to the maximum level, adjust the volume on your PC sound card or software program. Video is a vailable but there is no sound. If an HDMI cable is connected, check the audio output settings on the PC. Go to Sound and change Speaker Settings to Inte[...]

Sound issue There is an echo sound c oming from the speakers. Different decoding speeds between the pr oduct speakers and ex ternal speakers can cause an echo. In this case, set Speaker Settings to External . Remote contr ol issue The remote c ontrol does not work. Make sure that the batteries are correctly in place (+/-). Check if the batteries ar[...]

Other issue Caption is gra yed out and not selectable. If the selected input source is not TV , Caption cannot be selected from the OnScreen Display menu. Caption can be enabled from a source device . The product smells like plastic. The plastic smell is normal and disappears over time. The monitor appears tilted . Remove and then attach the stand [...]

Other issue There is no sound in HDMI mode . Displayed picture colors may not look normal. Video or sound may not be available. This can occur if a source device that only supports an older version of the HDMI standard is connected to the product. If these issues occur , connect an audio cable along with the HDMI cable. Some PC graphics cards may n[...]

Q & A Question Answer How can I change the frequency? Set the frequency on your graphics card. • Windows XP: Go to C ontrol P anel → Appearanc e and Themes → Display → Settings → Advanc ed → Monitor and adjust the frequency in Monitor Settings . • Windows ME/2000: Go to C ontrol P anel → Display → Settings → Advanced → Mon[...]

Question Answer How do I set pow ersaving mode? • Windows XP: Set pow er-saving mode in Con trol Panel → A ppearance and Themes → Display → Screen Saver Settings or BIOS SETUP on the PC. • Windows ME/2000: Set power -saving mode in Contr ol Panel → Display → Screen Saver Settings or BIOS SETUP on the PC. • Windows Vista: Set power-s[...]

Specications 1 Size 2 Display area H V 3 Dimensions ( W x H x D) W D H General Model Name DM32D DM40D Panel Siz e 32 CLASS (31.5 inches / 80 cm) 40 CLASS (40.0 inches / 101 cm) Display area 698.4 mm (H) x 392.85 mm ( V ) / 27.5 inches (H) x 15.47 inches ( V ) 885.6 mm (H) x 498.15 mm ( V ) / 34.87 inches (H) x 19.61 inches ( V ) Dimensions ( W x[...]

Po wer Supply AC 100 to 240 V AC (+/- 10%), 60 / 50Hz ± 3Hz Refer to the label at the back of the product as the standard v oltage can var y in differ ent countries. Environmen tal considerations Operating T emperature : 32 F ~ 104 F (0 C ~ 40 C) Humidity : 10 % ~ 80 %, non- condensing Storage T emperature : -4 F ~ 113 F (-20 C ~ 45 C) Humidity : [...]

P ow erSav er The power-sa ving function of this product reduces power consumption by switching off the scr een and changing the color of the power LED if the product is not used for a specified period of time. The power is not turned off in power-saving mode . T o switch the screen back on, pr ess any key on the keyboard or move the mouse. P ower-[...]

Pr eset Timing Modes ― This product can be set to only one resolution f or each screen size to obtain the optimum picture quality due to the natur e of the panel. Using a resolution other than the specified resolution may degrade the picture quality . T o avoid this, it is recommended that you select the optimum resolution specified f or your pro[...]

Resolution Horizontal F requency (kHz) V er tical Fr equency (Hz) Pix el Clock (MHz) Sync P olarit y (H/V ) VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 800 x 600 35.156 56.250 36.000 +/+ VESA, 800 x 600 37.879 60.317 40.000 +/+ VESA, 800 x 600 48.077 72.188 50.000 +/+ VESA, 800 x 600 46.875 75.000 49.500 +/+ VESA, 1024 x 768 48.363 60.004 65.000[...]

Appendix Responsibility for the P ay Ser vice ( C ost to C ustomers) ― When the ser vice is requested , in spite of in warranty, w e may charge you f or a visit from a service technician in the following cases . Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installation and etc. • If a ser vice technician gives instr[...]

Optimum Picture Quality and Afterimage Burn-in Pr evention Optimum Picture Quality • Due to the nature of the manufacturing of this product, approximately 1 pix el per million (1ppm) may be brighter or darker on the panel. This does not affect product performance. - The number of sub-pixels by panel type: 6,220,800 • Run Auto A djustment to imp[...]

Pr eventing afterimage burn-in ― The best way to prot ect the product from afterimage burn-in is switching the power off or setting the PC or system to run a screen sa ver when not in use. Also , Warranty service may be limited depending on instruction guide. • Po wering Off, Screen Saver and P ower Saving Mode - Po wer off the product for 2 ho[...]

License Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of D olby Laboratories. Ⓡ Manufactured under a license from U .S. Pat ent No ’ s: 5,956,674, 5,974,380, 5,978,762, 6,487,535, 6,226,616, 7,212,872, 7,003,467, 7,272,567, 7,668,723, 7,392,195, 7,930,184, 7,333,929 and 7,548,853. DT S, the Sym[...]

T erminology 480i / 480p / 720p / 1080i / 1080p ____ Each of the scanning rates above ref ers to the number of effective scanning lines that decides the screen resolution. The scanning rate may be indicated in i (interlaced) or p (progr essive), depending on the scanning method. - Scanning Scanning refers to a pr ocess of sending pixels that form a[...]