Samsung HP-P5091 manual

Owner ’ s Instructions HP-P5091 with WIRELESS HOME A V CENTER[...]

Impor tant W arranty Information Regarding T elevision Format V iewing W ide screen format PDP Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if y[...]

3 User Instructions This product is restricted to indoor operations to reduce any potential for harmful interference to co-channel MSS operations. Screen Image retention Do not display a still image (such as on a video game or when hooking up a PC to this PDP) on the plasma display panel for more than several minutes as it can cause screen image re[...]

T able of Contents General Information Y our New Plasma Display Panel ......................6 WIRELESS A V RECEIVER ................................8 Y our WIRELESS HOME A V CENTER ................9 Remote Control Buttons ................................11 Connections Connecting the PDP to the WIRELESS HOME AV CENTER ...............................[...]

PLASMA DISPLA Y P ANEL with WIRELESS HOME A V CENTER General Information Y our New Plasma Display Panel ......................................................6 WIRELESS A V RECEIVER ..................................................................8 Y our WIRELESS HOME A V CENTER ..................................................9 Remote Control Bu[...]

6 Y our New Plasma Display Panel Front Panel 7 8 Œ SOURCE button Press to toggle between all the external input sources (ie., Component, A V1, A V2, and S-Video). ´ MENU button Displays the main on-screen menu. ˇ VOL(+, -) buttons Press to increase or decrease the volume. Also used to select or adjust items on the on-screen menu. ¨ CH( , ) butt[...]

7 Rear Panel Checking Accessories Remote Control/ AAA Batteries (MD59-00355A) Antenna Cable (BN39-00333A) Wir eless signal cable (MD39-00108A) Power Cord (3903-000085) Owner’ s Instructions Ferrite Cores : 2EA (3301-001201) Once you have unpacked your PDP with WIRELESS HOME A V CENTER, check to make sure that you have all the parts shown here. If[...]

8 WIRELESS A V RECEIVER 1. ONL Y FOR SERVICE For Service only 2. A V SIGNAL JACK Connect to the WIRELESS SIGNAL INPUT Port on the rear of the PDP .[...]

9 Y our WIRELESS HOME A V CENTER Front Panel Œ POWER Press to turn the power on or off. Power On : GREEN Power Off : RED ´ Wireless LED This LED will light green when Wireless communication is successful. ˇ DTV(LED) This LED will light green when the DTV signal is recognized. The LED remains unlit for non-DTV signals. ¨ SOURCE Press to toggle b[...]

10 Rear Panel Œ AIR (75 Ω ) The cable from an off-air TV antenna (not from a satellite dish) connects to this jack. Both standard analog (NTSC) and high definition digital (A TSC) program broadcasts can be received through a single antenna connected to this jack. ´ CABLE (75 Ω ) The RG-6 cable from your cable TV provider (if you have one) con[...]

11 Remote Contr ol Buttons Remote Control Œ POWER ON button Tu r ns the PDP and WIRELESS HOME A V CENTER on. ´ ANTENNA button Alternates the input between Air and Cable. ˇ Number buttons Select the channel directly . ¨ +100 button Selects channels over 100. For example, to select channel 121, press “+100”, then press “2” and “1”. ˆ[...]

12 ◊ AUTO PROG. button Automatically cycles through all of the available channels and stores them in memor y . ± ADD/DEL button Adds or deletes channels in the TV’ s memor y . ≠ DNIe button Activates DNIe (Digital Natural Image engine). – SLEEP button Selects a preset time inter val for automatic shutoff. — SET button Sets up the Samsung[...]

PLASMA DISPLA Y P ANEL with WIRELESS HOME A V CENTER Connections Connecting the PDP to the WIRELESS HOME A V CENTER ................14 Connecting VHF and UHF Antennas ..............................................15 Connecting Cable TV .................................................................. ..16 Connecting a VCR .........................[...]

14 Connecting the PDP to the WIRELESS HOME A V CENTER 1 Make sure your PDP , A/V receiver and WIRELESS HOME AV CENTER are turned off and unplugged. 2 Install the WIRELESS HOME A V RECEIVER onto the bracket located at the top of the PDP’ s rear panel, in the direction of the arrow (as illustrated). 3 Connect the Wireless Signal cable from the WIRE[...]

15 Connecting VHF and UHF Antennas Antennas with 75-ohm Round Leads If your antenna looks like this: it has 75-ohm round leads. 1 Plug the antenna lead into the AIR terminal on the WIRELESS HOME A V CENTER. Use the antenna cable included in the product package.[...]

16 Connecting Cable TV Y ou can connect different cable systems to your WIRELESS HOME A V CENTER, including cable without a Cable box, and cable with a Cable box that descrambles some or all channels. Cable without a Cable Box 1 Plug the incoming cable into the cable terminal on the WIRELESS HOME A V CENTER. Use the antenna cable included in the pr[...]

17 Connecting a VCR Connecting a VCR to the Video or S-Video/Audio jack Connect the Video/Audio cables between the VIDEO or S-VIDEO / L - AUDIO - R jacks to the WIRELESS HOME A V CENTER and VIDEO or S-VIDEO / L - AUDIO - R output jacks on the VCR. (Note: For better video, use an S-Video cable.) Note • Please be sure to match the color coded input[...]

18 Connecting a Camcorder WIRELESS HOME A V CENTER Connect a Video/Audio cable between the VIDEO or S-VIDEO / L - AUDIO - R jacks to the WIRELESS HOME A V CENTER and the VIDEO or S-VIDEO / AUDIO output jacks on the camcorder . (Note: For better video, use an S-VIDEO cable.) Note • Please be sure to match the color coded input terminals and cable [...]

Playing DVD Audio cable Component cable Connect the Y , P b , P r (COMPONENT) input jacks on the WIRELESS HOME A V CENTER to the Y , P b , P r output jacks on the DVD player using a component cable. Connect the AUDIO L/R(COMPONENT) input jacks on the WIRELESS HOME A V CENTER to the AUDIO output jacks on the DVD player using an audio cable. or Conne[...]

20 Connecting a DTV Receiver (480i, 480p) Note: WIRELESS HOME A V CENTER does not take 720p and 1080i. W atching DTV Component cable Audio cable Connect the cable or antenna to the antenna input jack on the DTV receiver . Connect the Y , P b , P r (COMPONENT) input jacks on the WIRELESS HOME A V CENTER to Y, P B , P R output jacks on the DTV receiv[...]

21 Connecting a Digital Audio System There are many types of digital audio systems on the market today . A simplified illustration of an audio system is shown below . For more infor mation, see your audio system owner’ s manual. If your audio system has a coaxial digital audio input, connect to the “COAXIAL” output jack on the WIRELESS HOME A[...]

22 Connecting to a second TV WIRELESS HOME A V CENTER TV V ideo cable Audio cable Connect the Video/Audio cables between TV out / L - AUDIO - R jacks on the WIRELESS HOME AV CENTER to VIDEO / L - AUDIO - R input jacks on the second TV . Notes • Please be sure to match the color coded input terminals and cable jacks. • TV OUT works only for the [...]

23 Connecting Speakers External speakers are sold separately . Check with your dealer . Connect the speaker audio cable to the external speaker output jack on the PDP matching the “+” and “-” ends of the cable with the diagram on the PDP . How to Connect Speaker Cable ✱ External speakers MUST have a power handling capability of 12 watts m[...]

24 Installing the Speakers This speaker installation guide is for the PSN5042 speakers. Parts How to Attach the Speakers when using the Stand 2EA 2EA 1EA Speakers 1EA Middle Cabinet (W all Mount Only) Speaker Dust Cover Speaker Cable Screw 2EA ! Screw 6EA @ Screws 1 Remove the screws indicated on the rear of the PDP (6 screws on the left and right [...]

25 Screw ② 2 Set the speaker guide bracket into the square grooves located on either side of the PDP’ s bottom rear , then push the speaker guide bracket towards the center (as the arrow illustrates). Secure the speaker guide bracket with provided screws @ . (Always use the proper screws, as indicated.) 3 Secure the speaker dust cover by settin[...]

26 How to Attach the Speakers when using the W all Mount 1 Remove the screws indicated on the rear of the PDP (6 screws on the left and right sides, 2 screws on the center). 2 Set the speaker guide bracket into the square grooves located on either side of the PDP’ s bottom rear , then push the speaker guide bracket towards the center (as the arro[...]

27 3 Secure the speaker dust cover by setting it into the grooves located on the front side of the speakers. 4 Connect the speakers to the PDP using the speaker cables. The connection terminals are on the rear side of both the PDP and the speakers. (Match the color coded terminals and cables.) Notes • When moving the PDP with the speakers attache[...]

28 1 Firmly secure the pegs to the both sides of the stand base using 8 screws provided. How to assemble and attach the Stand-Base This guide is for the SMN5040 stand. 2 Using the 4 screws for securing the stand pegs and the monitor , fir mly attach the monitor to the stand pegs. (The exterior of the set may be different than the picture.) 3 For yo[...]

29 W all Installation Instructions 1 Do not install the PDP in any location other than a vertical wall. 2 To protect the perfor mance of the PDP and prevent problems, avoid the following locations : • Next to smoke and fire detectors. • Areas subject to vibration. • Areas subject to high voltage. • Near or around any heating apparatus. 3 Us[...]

30 1 The wall mount comes packaged in 3 parts. These par ts must be assembled together . Please tighten the captive screws(4EA) in the direction of the arrow after assembling the bracket. Install the W all Mount Bracket after the screws are securely inserted into the wall. 2 After installing the wall mount bracket, assemble the support bars and hin[...]

1 Remove the screws on the rear of the PDP panel. 2 Connect insulation holders to screws (see the illustration below). • If you are uncertain about installation, hire an Installation Specialist to install the wall mount bracket. • Be sure to check that the insulation holders are completely secured on both the left and right side after hanging t[...]

32 1. Contact an authorized technician when installing the wall attachment panel. 2. After hanging the PDP panel on the wall attachment panel, make sure that the Insulation holders are secure. 3. Be careful not to get your fingers caught during installation. 4. Make sure the wall attachment panel brackets are tightened. Other wise, the PDP panel ma[...]

PLASMA DISPLA Y P ANEL with WIRELESS HOME A V CENTER Operation Tu r ning the PDP On and Off ..........................................................34 Memorizing the Channels..............................................................35 Using the On-Screen Help ............................................................40 Setting your Favorite[...]

34 Tu rning the PDP On and Off Press the POWER ON button on the remote control. The PDP will be turned on and you will be ready to use its features. Y ou can also use the POWER ( ) button on the front of the PDP . Y ou can use the POWER ON button to turn on the WIRELESS HOME A V CENTER. The WIRELESS HOME A V CENTER and the PDP each have their own r[...]

35 Memorizing the Channels Y our PDP can memorize and store all of the available channels for both “off-air” (antenna) and cable channels. After the available channels are memorized, use the CH and CH buttons to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memor[...]

36 Storing Channels in Memor y (Automatic Method) 1 First, select the correct antenna (Air and Cable). See steps on previous page. Press the MENU button. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Auto Program”, then press the ENTER button. ➤ ➤ Quick way to acce[...]

37 Adding and Deleting Channels (Manual Method) 1 Use the number buttons to directly select the channel that will be added or deleted. Ex) Channel “11” 2 Press the ADD/DEL button, then press the ENTER button. Repeatedly pressing this button will alternate between “Add” and “Delete”. 3 Press the MENU button to exit. Note •Y ou can view[...]

38 Changing Channels Using the Channel Buttons Press the CH or CH button to change channels. When you press the CH or CH button, the PDP changes channels in sequence. Y ou will see all the channels that the PDP has memorized. (The PDP must have memorized at least three channels.) Y ou will not see channels that were either erased or not memorized. [...]

39 Adjusting the V olume Using the V olume Buttons Press the VOL or VOL button to increase or decrease the volume. Using Mute Using the MUTE Button At any time, you can temporarily cut off the sound using the MUTE button. 1 Press the MUTE button and the sound cuts off. 2 The word “Mute” will appear in the lower-left corner of the screen. 3 To t[...]

40 To turn the on-screen help on : 1 Press the MENU button. Press the ▲ or ▼ button to select “Preference”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Function Help”, then press the ENTER button. The on-screen help appears. 3 Press the ▲ or ▼ button to select “On” or “Off”. Press the ▲ or ▼ but[...]

41 1 Press the MENU button. Press the ▲ or ▼ button to select “Preference”, then press the ENTER button. 2 Press the ENTER button. The Favorite Channels option is displayed. 3 Press the ▲ or ▼ button to select the channel you want to designate as a “Favorite Channel” and press the ENTER button. For each Favorite Channel, a “ √ ?[...]

42 1 Press the MENU button. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Fine T une”, then press the ENTER button. 3 Press the œ or √ button to adjust the fine tuning. 4 To store the fine tuning setting in the TV’ s memor y , press the ENTER button. (A star icon([...]

Time TV Move Enter Return Select the time zone in which you live 43 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “T ime”, then press the ENTER button. 3 Y ou will be asked if your local area obser ves Daylight Saving T ime. Press the ▲ or ▼ b[...]

44 1 Press the MENU button on the remote control. 2 Use the ▲ or ▼ button to select “Channel”, then press the ENTER button. 3 Press the ▲ or ▼ button to select “Signal Strength”, then press the ENTER button. The “Signal Strength” meter will be displayed. If the signal strength meter indicates that the signal is weak, physically [...]

45 Setting Up your Remote Contr ol This PDP's remote control can operate almost any VCR, Cable box or DVD. After it has been set up properly , your remote control can operate in four different modes : TV , VCR, CA TV , or DVD. Pressing the corresponding button on the remote control allows you to switch between these modes, and control whicheve[...]

46 Remote Control Codes VCR Codes Cable Box Codes DVD Codes Admiral 020 Aiwa 025 Akai 027, 004, 032 Audio Dynamics 007, 026 Bell&Howell 018 Broksonic 022 Candle 002, 006, 003, 015, 008, 055 Canon 021, 056 Citizen 002, 006, 003, 015, 008, 055 Colortyme 007 Craig 002, 024 Curtis Mathes 002, 017, 007, 008, 021, 025, 056, 064, 066 Daewoo 003, 015, [...]

PLASMA DISPLA Y P ANEL with WIRELESS HOME A V CENTER Picture Contr ol Customizing the Picture ................................................................48 Using Automatic Picture Settings ....................................................49 Selecting the Color T one ................................................................50 DNIe (Di[...]

48 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Display Picture/ Sound Menu”, then press the ENTER button. 3 Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. 4 Press the ▲ or ▼ button to select “Custom”, [...]

49 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. ➤ ➤ Quick way to access the picture setting: Just press the “P .MODE” button on the remote control. 2 Press the ▲ or ▼ button to select “Display Picture/ Sound Menu”, then press the ENTER button. 3 Press the ▲ or ▼ button [...]

50 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Display Picture/ Sound Menu”, then press the ENTER button. 3 Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. 4 Press the ▲ or ▼ button to select “Color T one[...]

51 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. ➤ ➤ Quick way to select DNIe: Simply press the “DNIe” button under the cover of the remote control. 2 Press the ▲ or ▼ button to select “Display Picture/ Sound Menu”, then press the ENTER button. 3 Press the ▲ or ▼ button [...]

52 Changing the Picture Size 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Picture Size”, then press the ENTER button. 3 Press the œ or √ button to select the Picture Size you want, then press the ENTER button. Notes • If you watch a still i[...]

53 Notes • In TV , VIDEO, S-VIDEO, and Component (480i, 480p) modes, all screen modes can be selected. (16:9 ➞ 4:3 ➞ Panorama ➞ Zoom1 ➞ Zoom2). • 16:9(Wide) and 4:3(Normal) Aspect ratios are available for HDTV broadcasts. 16:9 (W 16:9 (W ide) ide) Sets the picture to 16:9 wide mode. 4:3 (Normal) Sets the picture to 4:3 normal mode. Pano[...]

[...]

PLASMA DISPLA Y P ANEL with WIRELESS HOME A V CENTER Sound Contr ol Using an Automatic Sound Settings ................................................56 Choosing a Digital Sound Format (Dolby Digital or PCM) ..................57 Choosing a Multi-T rack Language ..................................................58 Choosing a Multi-T rack Sound (MTS)[...]

56 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. ➤ ➤ Quick way to access the Sound Mode menu : Just press the “S.MODE” button on the remote control. 2 Press the ▲ or ▼ button to select “Display Picture/ Sound Menu”, then press the ENTER button. 3 Press the ▲ or ▼ button [...]

57 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Sound IN/OUT”, then press the ENTER button. 3 Press the ▲ or ▼ button to select “Digital Input” or “Digital Output”, then press the ENTER button. • Lt/Rt : Left total/right total. Fou[...]

58 1 Press the MENU button. Press the ▲ or ▼ button to select “Preference”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Multi-T rack Options”, then press the ENTER button. 3 Press the ENTER button to select the “Multi-T rack Language”. Press the ▲ or ▼ button to choose the appropriate language and press[...]

59 1 Press the MENU button. Press the ▲ or ▼ button to select “Preference”, then press the ENTER button. ➤ ➤ Quick way to access the MTS menu: Just press the “MTS” button on the remote control. 2 Press the ▲ or ▼ button to select “Multi-T rack Options”, then press the ENTER button. 3 Press the ▲ or ▼ button to select “[...]

60 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Display Picture/ Sound Menu”, then press the ENTER button. 3 Press the ▲ or ▼ button to select “Sound”, then press the ENTER button. 4 Press the ▲ or ▼ button to select “Equalizer”,[...]

61 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. ➤ ➤ Quick way to access the T ruSurround XT menu: Just press the “SRS TSXT” button on the remote control. 2 Press the ▲ or ▼ button to select “Display Picture/ Sound Menu”, then press the ENTER button. 3 Press the ▲ or ▼ b[...]

62 1 Press the MENU button.Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Dynamic Range”, then press the ENTER button. 3 Press the ▲ or ▼ button to select “On” or “Off”, then press the ENTER button. Note • DRC adjustment is available only for digital channel[...]

PLASMA DISPLA Y P ANEL with WIRELESS HOME A V CENTER Function Description Selecting the Fan ..........................................................................64 V iewing Closed Captions ..............................................................65 Setting Up Digital Captions ..........................................................66 Us[...]

64 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Display Picture/ Sound Menu”, then press the ENTER button. 3 Press the ▲ or ▼ button to select “Function”, then press the ENTER button. 4 Press the ENTER button to select “Fan”. 5 Press[...]

65 1 Press the MENU button. Press the ▲ or ▼ button to select “Preference”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Caption”, then press the ENTER button. 3 Press the ENTER button to select “Caption”. Press the ▲ or ▼ button to turn closed captions “On” or “Off”, then press the ENTER button.[...]

66 How to Activate or Deactivate the On-screen Captions 1 Press the MENU button. Press the ▲ or ▼ button to select “Preference”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Caption”, then press the ENTER button. 3 Press the ENTER button to select “Caption”. Press the ▲ or ▼ button to select “On”, th[...]

67 5 Press the ▲ or ▼ button to select “Caption Options”, then press the ENTER button. 6 Select the option (Size, Style, Foreground Color , Background Color , Foreground Opacity , Background Opacity , or Return to Default) you want using the ▲ or ▼ button. Use the ▲ or ▼ button to select the menu you want and press ENTER. Size: This[...]

68 Setting Up Y our Personal ID Number (PIN) 1 Press the MENU button. Press the ▲ or ▼ button to select “Preference”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “V -Chip”, then press the ENTER button. The message “Enter PIN” will appear . Enter your 4 digit PIN number . Note • The default PIN number of a [...]

69 How to Enable/Disable the V -Chip 1 Press the MENU button. Press the ▲ or ▼ button to select “Preference”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “V -Chip”, then press the ENTER button. The message “Enter PIN” will appear . Enter your 4 digit PIN number . 3 The “V -Chip” screen will appear . T o [...]

70 How to Set up Restrictions using the “TV Parental Guidelines” First, set up a personal identification number (PIN), and enable the V -Chip. (See previous section.) Parental restrictions can be set up using either of two methods: The TV guidelines or the MP AA rating. 1 Press the MENU button. Press the ▲ or ▼ button to select “Preferenc[...]

71 5 At this point, one of the TV -Ratings is selected. Press the ENTER button. Depending on your existing setup, a symbol will be selected. (Blank = Unblocked, = Blocked) While “ ” is selected, press the ENTER button to block or unblock the categor y . To select a different TV -Rating, press the ▲ or ▼ button and then repeat the process. N[...]

72 How to Set up Restrictions using the MP AA Ratings: G, PG, PG-13, R, NC-17, X, NR The MP AA rating system uses the Motion Picture Association of America (MP AA) system, and its main application is for movies. When the V -Chip lock is on, the TV will automatically block any programs that are coded with objectionable ratings (either MP AA or TV -R[...]

73 How to Reset the TV after the V -Chip Blocks a Channel (“Emergency Escape”) If the TV is tuned to a restricted channel, the V -Chip will block it. The screen will go blank and the following message will appear: 1 Press the ENTER button. 2 Enter your PIN number . To resume normal viewing, tune to a different channel using the number buttons. [...]

74 Y our WIRELESS HOME A V CENTER has an Electronic Program Guide (EPG) to help you navigate through all the possible viewing options. The EPG supplies information, such as program lists, start and end times of all available channels. In addition, the detailed information about the program is often available in the EPG. (The availability and the am[...]

75 1 Press the MENU button. Press the ▲ or ▼ button to select “Guide”, then press the ENTER button. 2 Press the ▲ or ▼ button to select the “Default Guide”, then press the ENTER button. 3 Press the ▲ or ▼ button to alternate between “Mini Guide” and “Full Guide” and press the ENTER button. Viewing the Information about O[...]

[...]

PLASMA DISPLA Y P ANEL with WIRELESS HOME A V CENTER Appendix Tr oubleshooting ............................................................................78 Care and Maintenance ................................................................81 Specifications ..............................................................................82[...]

78 Tr oubleshooting If the TV seems to have a problem, first tr y this list of possible problems and solutions. If none of these troubleshooting tips apply , then call your nearest ser vice center . WIRELESS HOME A V CENTER Problem Possible Solution Poor picture quality Tr y another channel. Adjust the antenna. Check all wire connections. Poor soun[...]

79 PDP (Continued) Problem Possible Solution PDP set is turned on and the message “No Wireless Signal or Please Check WIRELESS HOME A V CENTER Power” appears. Cause 1: The WIRELESS HOME A V CENTER is turned off. Cause 2: The message still appears despite the A V Center is on. Solution 1: T ur n on the PDP set and then turn on the A V Center as [...]

80 PDP (Continued) Problem Possible Solution There is no signal in a digital chan- nel, and messages “Searching for Signals” followed by “No Signal” appear . Cause: Channels have been stored using Auto Memorize but the broadcasting companies are not sending the corresponding signals. Or External Input has been selected but there is no signa[...]

81 W ith proper care, your PDP with WIRELESS HOME A V CENTER will give you many years of ser vice. Please follow these guidelines to get the maximum perfor mance from your PDP with WIRELESS HOME A V CENTER. Caution • Do not put the PDP with WIRELESS HOME A V CENTER near extremely hot, cold, humid, or dusty places. • Do not put the PDP with WIRE[...]

82 Specifications HP-P5091(PDP) 1257 (W) x 84 (D) x 740 (H) mm ; 49.49 (W) x 3.31 (D) x 29.13 (H) inches 54 (W) x 31.5 (D) x 220 (H) mm ; 2.13 x 1.24 x 8.66 inches 36 kg ; 79.41 lbs 150g (including batteries) ; 0.33 lbs 120V~, 60Hz 490 W atts 1366(H) x 768(V) ; 14.17 x 11.81 x 2.76 inches 127 Cm/50 inches WIRELESS DVI, WIRELESS Din, Speaker out Mod[...]

83 Memo[...]

BN68-00629A-00 1-800-SAMSUNG (1-800-726-7864) Samsung Electronics America Service Division 400 V alley Road, Suite 201 Mount Arlington, NJ 07856 www .samsungusa.com Samsung Electronics Canada Inc. Samsung Customer Car e 7037 Financial Drive Mississauga, Ontario L5N 6R3 www .samsung.ca[...]