Samsung S22C150N manual

BN46-00338B-0 1 User manual S19C150N S19C150F S20C150FL S22C150N The color and the appearance may differ depe nding on the product, and the specifications are subject to change without prior notice to improve the performance.[...]

Table Of Cont ents 2 Table Of Contents BEFORE USING THE PRODUCT 7 Copyright 7 Icons used in this manual 8 Cleaning 8 Cleaning 9 Securing the Installation Space 9 Precautions for storage 10 Safety Precautions 10 Symbols for safety precautions 11 Electricity and Safety 12 Installation and Safety 14 Operation 18 Correct posture to use the product PREP[...]

Table Of Contents Table Of Cont ents 3 33 Connecting and Using a PC 33 Connection Using the D-SUB Cable (Analogue Type) 34 Driver Installation 35 Setting Optimum Resolution 36 Changing the Resolution Using a PC SCREEN SETUP 40 Brightness 40 Configuring Brightness 41 Contrast 41 Configuring Contrast 42 Sharpness 42 Configuring Sharpness 43 SAMSUNG M[...]

Table Of Contents Table Of Cont ents 4 51 Blue 51 Configuring Blue 52 Color Tone 52 Configuring the Color Tone Settings 53 Gamma 53 Configuring Gamma COORDINATING OSD 54 Language 54 Configuring Language 55 Menu H-Position & Menu V-Position 55 Configuring Menu H-Position & Menu V- Position 56 Display Time 56 Configuring Display Time 57 Trans[...]

Table Of Contents Table Of Cont ents 5 INFORMATION MENU AND OTHERS 64 INFORMATION 64 Displaying INFORMATION 65 Configuring Brightne ss and Contrast in the Initial Screen INSTALLING THE SOFTWARE 66 MagicTune 66 What is "MagicTune"? 66 Installing the Software 67 Removing the Software 68 MultiScreen 68 Installing the Software 69 Removing the[...]

Table Of Contents Table Of Cont ents 6 90 Correct Disposal 90 Correct Disposal of This Product (Waste Electrical & Electronic Equipment) 91 Terminology INDEX[...]

7 Before Using the Product Before Using the Product Copyright The content s of this manua l are subjec t to change with out notice to improve qua lity. 2013 Samsung Elec tronics Samsung Electro nics owns th e copyright fo r this man ual. Use or reproduction of this manual in part s or entirety with out the authoriza tion of Samsung Elec tronics is [...]

8 Before Using the Product Before Using the Product Cleaning Cleaning Exercise care when cleaning as th e panel and exte rior of advanced LCDs are easily scr atched. Take the following steps when c leaning. 1. Power off the monitor and computer. 2. Disconnect the power c ord from the monitor. Hold the power cable by the plug and do not touch the ca[...]

9 Before Using the Product Before Using the Product Securing the Installation Space Ensure some sp ace around th e product f or ventilation. An internal temper ature rise may ca use fire and damage the prod uct. Be sure to al low the amount of space as shown below or greater when installing the produc t. The exterior may differ depending on the pro[...]

10 Before Using the Product Before Using the Product Safety Precautions Symbols for safety precautions Cautio n RISK OF ELECTRIC SHOCK DO NOT OPEN Caution: TO REDU CE THE RISK OF ELECTRIC SHO CK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL. This symbol indicat es that high vo[...]

11 Before Using the Product Before Using the Product Electricity and Safety The following images are for reference only. Real-life situations may differ from what is shown in the images. Warning Do not use a damaged p ower cord o r plug, or a loose powe r socket.  An electric shock or fire may re sult. Do not plug many prod ucts into the sam e p[...]

12 Before Using the Product Before Using the Product Caution Installation and Safety Warning Do not unplug the power cord when the prod uct is in use.  The product may become damaged by an electric shock. Do not use the po wer cord for prod ucts other than a uthorized produc ts supplied by Samsung.  An electric shock or fire may re sult. Keep[...]

13 Before Using the Product Before Using the Product Caution Do not install t he product on an unstab le or vibrating surface (insec ure shelf, sloped surfa ce, etc.).  The product m ay fall and break o r cause a pers onal injury.  Using the produ ct in an area w ith excess vibration m ay damage the product or cause a fire. Do not install th [...]

14 Before Using the Product Before Using the Product Operation Warning Put down the p roduct carefully.  The product m ay fall and break o r cause a pers onal injury. Installing the product in an unusual place (a place expose d to a lot of fine particles, chemical sub stances or extreme tempe ratures, or an airport or train station whe re the pr[...]

15 Before Using the Product Before Using the Product During a light ning or thunde rstorm, power o ff the product and remove the po wer cable.  An electric shock or fire may re sult. Do not drop objects on the pr oduct or apply impact.  An electric shock or fire may re sult. Do not move the pr oduct by pulli ng the power co rd or any cable. ?[...]

16 Before Using the Product Before Using the Product Caution Leaving the screen fixed on a stationary image for an extend ed period of t ime may cause a fterimage bu rn-in or defe ctive pixels.  If you are no t going to u se the produ ct for an exte nded period o f time, activate power-saving mode or a moving-pi cture screen saver . Disconnect t[...]

17 Before Using the Product Before Using the Product Do not hold the monitor up side-down or m ove it by h olding the s tand.  The product m ay fall and break o r cause a pers onal injury. Do not use humidifi ers or stoves ar ound the produc t.  An electric shock or fire may re sult. Rest your eye s for more t han 5 minutes for every 1 h our [...]

18 Before Using the Product Before Using the Product Correct posture to use the product Use the product in the correct post ure as follows:  Straighten your back.  Allow a distance of 45 to 50 cm between your eye an d the screen, and look slightly downward at the screen. Keep your eyes directly in front of th e screen.  Adjust the angle so[...]

19 1 Preparations 1 Preparations 1.1 Checking the Contents 1.1.1 Removing the Packaging 1 Open the packaging b ox. Be careful not to dam age the product whe n you open the packa ging with a sharp instrum ent. 2 Remove the sty rofoam from the produ ct. 3 Check the compo nents and remove the styrofoam and pl astic bag. This image is for reference onl[...]

20 Preparations 1 1 Preparations 1.1.2 Checking the Components  Contact the dealer from whom you purch ased the product if any item is missing.  The appearance of the components and items sold separately may differ from the image shown. Components Components may vary depending on the country. Quick setup guide Warranty card (Not available in [...]

21 Preparations 1 1 Preparations 1.2 Parts 1.2.1 Frontal Button The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Icons Description Open or close the onscreen display (OSD ) m enu, or re turn to th e parent menu.  OSD control lock: Maintain the current settings, or[...]

22 Preparations 1 1 Preparations Icons Description Move to the upper or lower menu or adjust the value for an option on the OSD menu. Use this button to control the brightness and contrast of the screen. Confirm a me nu selectio n. Press the [ ] button to automatically adjust the screen settings. Changing the resolution in Display Properties will a[...]

23 Preparations 1 1 Preparations 1.2.2 Reverse Side  The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.  Provided ports may vary depending on the product. Port Description Connects to the DC power adapter. Connect to a PC using the D-SUB c able. DC 14V RGB IN DC [...]

24 Preparations 1 1 Preparations 1.3 Installation 1.3.1 Attaching the Stan d (S19C150F / S20C150FL) Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. Insert the stand neck into the stand base in the direction shown in the figure. Check that th e stand neck is firmly connec ted[...]

25 Preparations 1 1 Preparations 1.3.2 Attaching the Stan d (S19C150N / S22C150N) Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. Insert the stand neck into the stand base in the direction shown in the figure. Check that th e stand neck is firmly connec ted. Tightly fasten t[...]

26 Preparations 1 1 Preparations 1.3.3 Removing the Stand (S19C150F / S20C150FL) Place a soft clo th over the tab le to protect the product and place the product onto the cloth so that the front of the product faces downwards. While holding the st and neck with one hand, poun d the other fisted hand down on to the top of the st and base in the dire[...]

27 Preparations 1 1 Preparations 1.3.4 Removing the Stand (S19C150N / S22C150N) Place a soft clo th over the tab le to protect the product and place the product onto the cloth so that the front of the product faces downwards. While holding the st and neck with one hand, poun d the other fisted hand down on to the top of the st and base in the direc[...]

28 Preparations 1 1 Preparations 1.3.5 Installing a Wall-mount Kit or Desktop Stand (S19C 150F / S20C150FL) Align the grooves and tightly fasten the sc rews on the brack et on the prod uct with the corre sponding parts on the wall-mount kit or desktop stand you want t o attach. Notes  Using a screw longer than the standard length can damage the [...]

29 Preparations 1 1 Preparations 1.3.6 Adjusting the Product Tilt The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.  You can adjust the tilt of your monitor.  Hold the lower part of the product and adjust the tilt carefully. S19C150N / S22C150N S19C150F / S20C15[...]

30 Preparations 1 1 Preparations 1.3.7 Anti-theft Lock An anti-theft lock allows you to use the product se curely even in public places. T he locking device shape and locking m ethod depe nd on the m anufacturer. Refer to the use r guide pr ovided wi th your anti-t heft locking device for de ta ils. The lock device is sold separately. The color and[...]

31 2 Connecting and Us ing a Source Device 2 Connecting and Using a Source Device 2.1 Before Connecting 2.1.1 Pre-connection Checkpoints  Before connectin g a source devic e, read the user manual pro vided with it. The number and locations of ports on source device s may differ from device to dev ice.  Do not connec t the power cable until al[...]

32 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.2 Connecting the Power  Connect the p ower adapt er to [DC 14V] jack on the rear of the product. Connect the p ower cable t o the DC pow er adapter. Next, connec t the DC power adapter to t he product. Plug in the power cable to the power socke t. S19C150F / S20C[...]

33 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.3 Connecting and Using a PC Select a connect ion method suitable for your PC. Connecting parts may differ in different products. 2.3.1 Connection Using the D-SUB Cable (A nalogue Type) Do not connect the power cable before connecting all other cables. Ensure you con[...]

34 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.3.2 Driver Installation  You can set the optimum resolution and frequency for this product by installing the corresponding drivers.  An installation driver is contained on the CD supplied with the product.  If the file provided is faulty, visit th e Samsung[...]

35 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.3.3 Setting Optimum Resolution An information message abou t setting optimum resolution will appear if you power on the product for the first time after purchase. Select a langua ge on the produ ct and chang e the resolut ion on your PC to the optimum setting. 1 Pre[...]

36 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.3.4 Changing the Re solution Using a PC  Adjust the resolution and refresh rate in Control Panel on you r PC to obtain optimum picture quality.  The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected. Changing the Resolution on W[...]

37 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device Changing the Resolution on Windows Vista Go to Control P anel Personalization Di splay Settings and change the resolution. 12 34 *********** ***********[...]

38 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device Changing the Resolution on Windows 7 Go to Control P anel Display Screen Resolution and change th e re solution. 12 34[...]

39 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device Changing the Resolution on Windows 8 Go to Settings Control Panel Display Screen Resolu tion and change the resolution. 12 34 5[...]

40 3 Screen Setup 3 Screen Setup Configure the screen settings such as brightness. 3.1 Brightness You can adjust the general brightne ss of the picture. (Range: 0~100) A higher value wil l make the pictur e appear bright er.  This menu is not available when Bright is set to Dynamic Contras t mode.  This menu is not available when Eco Saving i[...]

41 Screen Setup 3 3 Screen Setup 3.2 Contrast Adjust the cont rast between th e objects and b ackground. (Range: 0~100) A higher va lue will i ncrease the contrast t o make t he object ap pear clear er. This option is not available when Bright is in Cinema or Dynamic Contrast mode. 3.2.1 Configuring Contrast 1 Press any butto n on the front of the [...]

42 Screen Setup 3 3 Screen Setup 3.3 Sharpness Make the ou tline of objects more clear o r blurry. (Rang e: 0~100) A higher va lue will m ake the ou tline of o bjects cleare r.  This option is not available when Bright is in Cinema or Dynamic Contrast mode.  This menu is not available when Upscale is in Mode1 or Mode2 . 3.3.1 Configuring Shar[...]

43 Screen Setup 3 3 Screen Setup 3.4 SAMSUNG MAGIC Bright This menu provides an optimum picture qu ality suitable for the environme nt where the produc t will be used. This menu is not available when Eco Saving is enabled. You can customize the brigh tness to suit your preferences. 3.4.1 Configuring SAMSUNG MAGIC Bright 1 Press any butto n on the f[...]

44 Screen Setup 3 3 Screen Setup 3.5 SAMSUNG MAGIC Upscale Upscale function can enhance the laye rs of the pictu re details and th e vividness of the p icture.  The function has more obvious effects on low-resolution pictures.  This menu is not available when Bright is in Cinema or Dynamic Contrast mode. 3.5.1 Configuring SAMSUNG MAGIC Upscal[...]

45 Screen Setup 3 3 Screen Setup 3.6 Image Size Change the pi cture size. 3.6.1 Changing the Image Size 1 Press any butto n on the front of the prod uct to display t he Function Ke y Guide. Next, press [ ] to display the corresponding me nu screen. 2 Press [ ] to move to PICTUR E and press [ ] on th e product. 3 Press [ ] to move to Image Size and [...]

46 Screen Setup 3 3 Screen Setup 3.7 H-Position & V-Position H-Position : Move the scre en to the left or right. V-Positio n : Move the sc reen up or down. 3.7.1 Configuring H-Position & V-Position 1 Press any butto n on the front of the prod uct to display t he Function Ke y Guide. Next, press [ ] to display the corresponding me nu screen.[...]

47 Screen Setup 3 3 Screen Setup 3.8 Coarse Adjust the scre en frequency. 3.8.1 Adjusting Coarse 1 Press any butto n on the front of the prod uct to display t he Function Ke y Guide. Next, press [ ] to display the corresponding me nu screen. 2 Press [ ] to move to PICTUR E and press [ ] on th e product. 3 Press [ ] to move to Coarse and press [ ] o[...]

48 Screen Setup 3 3 Screen Setup 3.9 Fine Fine-adjust the sc reen to obt ain a vivid pict ure. 3.9.1 Adjusting Fine 1 Press any butto n on the front of the prod uct to display t he Function Ke y Guide. Next, press [ ] to display the corresponding me nu screen. 2 Press [ ] to move to PICTUR E and press [ ] on th e product. 3 Press [ ] to move to Fi [...]

49 4 Configuring Tint 4 Configuring Tint Adjust the tint of the screen. This menu is not available when Bright is set to Cinema or Dynamic Contrast mode. SAMSUNG MAGIC 4.1 Red Adjust the valu e of the colo r red in the p icture. (Range : 0~100) A higher value wil l increase the inte nsity of the color. 4.1.1 Configuring Red 1 Press any butto n on t[...]

50 Configuring Tint 4 4 Configuring Tint 4.2 Green Adjust the valu e of the colo r green in th e picture. (Ran ge: 0~100) A higher value wil l increase the inte nsity of the color. 4.2.1 Configuring Green 1 Press any butto n on the front of the prod uct to display t he Function Ke y Guide. Next, press [ ] to display the corresponding me nu screen. [...]

51 Configuring Tint 4 4 Configuring Tint 4.3 Blue Adjust the valu e of the colo r blue in the p icture. (Ran ge: 0~100) A higher value wil l increase the inte nsity of the color. 4.3.1 Configuring Blue 1 Press any butto n on the front of the prod uct to display t he Function Ke y Guide. Next, press [ ] to display the corresponding me nu screen. 2 P[...]

52 Configuring Tint 4 4 Configuring Tint 4.4 Color Tone Adjust the gen eral color tone of the picture. 4.4.1 Configuring the Color Tone Settings 1 Press any butto n on the front of the prod uct to display t he Function Ke y Guide. Next, press [ ] to display the corresponding me nu screen. 2 Press [ ] to move to COLOR a nd press [ ] on the prod uct.[...]

53 Configuring Tint 4 4 Configuring Tint 4.5 Gamma Adjust the mid-ra nge brigh tness (Gamma) of the pict ure. 4.5.1 Configuring Gamma 1 Press any butto n on the front of the prod uct to display t he Function Ke y Guide. Next, press [ ] to display the corresponding me nu screen. 2 Press [ ] to move to COLOR a nd press [ ] on the prod uct. 3 Press [ [...]

54 5 Coordi nating OSD 5 Coordinating OSD 5.1 Language Set the menu lang uage.  A change to the language setting will only be applied to the onscreen menu display.  It will not be applied to other functions on your PC. 5.1.1 Configuring Language 1 Press any butto n on the front of the prod uct to display t he Function Ke y Guide. Next, press [...]

55 Coordinating OSD 5 5 Coordi nating OSD 5.2 Menu H-Position & Menu V-Position Menu H-Position : Move the menu position to th e left or right. Menu V-Position : Move the menu p osition up or down. 5.2.1 Configuring Menu H- Position & Menu V-Position 1 Press any butto n on the front of the prod uct to display t he Function Ke y Guide. Next,[...]

56 Coordinating OSD 5 5 Coordi nating OSD 5.3 Display Time Set the on-screen disp lay (OSD) menu to automatically disapp ear if the m enu is not used fo r a specified period of time. Display Time can be used to spec ify the time after w hich you want the OSD menu to disappear. 5.3.1 Configuring Display Time 1 Press any butto n on the front of the p[...]

57 Coordinating OSD 5 5 Coordi nating OSD 5.4 Transparency Set the transp arency for th e menu windo ws: 5.4.1 Changing Transparency 1 Press any butto n on the front of the prod uct to display t he Function Ke y Guide. Next, press [ ] to display the corresponding me nu screen. 2 Press [ ] to move to MENU SETTINGS and press [ ] on the pr oduct. 3 Pr[...]

58 6 Setup and Reset 6 Setup and Reset 6.1 Reset Return all the sett ings for the produ ct to the defau lt factory settings. 6.1.1 Initializing Settings (Reset) 1 Press any butto n on the front of the prod uct to display t he Function Ke y Guide. Next, press [ ] to display the corresponding me nu screen. 2 Press [ ] to move to SETUP&RESET and p[...]

59 Setup and Reset 6 6 Setup and Reset 6.2 Eco Saving The Eco Saving function reduces po wer consumption by controlling the electric current used by the monitor pane l. This menu is not available when Bright is in Dynamic Contrast mode. 6.2.1 Configuring Eco Savi ng 1 Press any butto n on the front of the prod uct to display t he Function Ke y Guid[...]

60 Setup and Reset 6 6 Setup and Reset 6.3 Off Timer You can set th e product t o automatica lly turn off. 6.3.1 Configuring Off Timer 1 Press any butto n on the front of the prod uct to display t he Function Ke y Guide. Next, press [ ] to display the corresponding me nu screen. 2 Press [ ] to move to SETUP&RESET and pr ess [ ] on the pro duct.[...]

61 Setup and Reset 6 6 Setup and Reset 6.4 Turn Off After The off timer can be set within a ra nge of 1 to 23 hours. The product will au tomatically power off after the specified nu mber of hou rs. This option is only available when Off Timer is set to On . 6.4.1 Configuring Turn Off After 1 Press any butto n on the front of the prod uct to display[...]

62 Setup and Reset 6 6 Setup and Reset 6.5 Key Repeat Time Control the response ra te of a butto n when the b utton is press ed. 6.5.1 Configuring Key Repeat Time 1 Press any butto n on the front of the prod uct to display t he Function Ke y Guide. Next, press [ ] to display the corresponding me nu screen. 2 Press [ ] to move to SETUP&RESET and[...]

63 Setup and Reset 6 6 Setup and Reset 6.6 Customized Key You can customize Customized Key as follows. 6.6.1 Configuring Customized Key 1 Press any butto n on the front of the prod uct to display t he Function Ke y Guide. Next, press [ ] to display the corresponding me nu screen. 2 Press [ ] to move to SETUP&RESET and pr ess [ ] on the pro duct[...]

64 7 INFORMATION Menu a nd Others 7 INFORMATION Menu and Others 7.1 INFORMATION View the current i nput source , frequenc y and reso lution. 7.1.1 Displaying INFORMATION 1 Press any butto n on the front of the prod uct to display t he Function Ke y Guide. Next, press [ ] to display the corresponding me nu screen. 2 Press [ ] to move to INFO RMATION[...]

65 INFORMATION Menu and Others 7 7 INFORMATION Menu a nd Others 7.2 Configuring Brightness and Contrast in the Initial Screen Adjust the Brightness , Contrast using the [ ] buttons wh en the initial screen (that displays no menu screen) is di splayed. 1 Press any button o n the front of the product (w hen no menu sc reen is displayed ) to display t[...]

66 8 Installing the Software 8 Installing the Software 8.1 MagicTune 8.1.1 What is "MagicTune"? "MagicTune " is a software program that helps with monitor ad justments by prov iding compre hensive descriptions of monitor fun ctions and eas y-to-unde rstand guid elines. You can adjust the product with the mouse and the keyboard w[...]

67 Installing the Software 8 8 Installing the Software 8.1.3 Removing the Software You can only re move "MagicTune™" thro ugh Add or Remove Programs in Windows. To remove "M agicTune™", co mplete the follo wing steps. 1 Click Start select Settings , and select Control Pane l from the menu . For Wind ows XP, cl ick Start , an[...]

68 Installing the Software 8 8 Installing the Software 8.2 MultiScreen "MultiScreen" enab les users to use th e monitor by par titioning multiple sect ions. 8.2.1 Installing the Software 1 Insert the installation CD into the CD-ROM drive. 2 Select the " MultiScreen" setu p program. If the pop-up screen for the software installat[...]

69 Installing the Software 8 8 Installing the Software Hardware  At least 32MB of memory  At least 60MB o f free space on the hard disk drive 8.2.2 Removing the Software Click Start , select Settings / Co ntrol Panel , and then d ouble-click Add or Remove Programs . Select "MultiScre en" from th e program lis t and click the Add/Del[...]

70 9 Troubleshooting Guide 9 Troubleshooting Guide 9.1 Requirements Before Contacting Samsung Customer Service Center 9.1.1 Testing the Product Before calling Samsung Customer Service Center, test your prod uct as follows. If the problem persists, contact Samsung Customer Service Center. Check if your p roduct is oper ating normally by using the pr[...]

71 Troubleshooting Guide 9 9 Troubleshooting Guide The message Chec k Signal Cable ap pears. Check that the cable is prop erly connecte d to the product. (Refer to "2.3 Co nnecting and Using a PC") Check that th e device co nnected to t he product is powered on. Not Optimum Mode is displayed. This message ap pears when th e signal from th[...]

72 Troubleshooting Guide 9 9 Troubleshooting Guide Source device issu e A beeping sound is heard when my PC is booting. If a beeping sound is heard when your PC is booting, have y our PC serviced.[...]

73 Troubleshooting Guide 9 9 Troubleshooting Guide 9.2 Q & A Question Answer How can I change the frequency? Set the frequency on your graphics card.  Windows XP: Go to Control Panel Appearance and Themes Display Settings Advanced Monitor , and adjust Refresh rate under Monitor settings .  Windows ME/2000: Go to Control Panel Display Sett[...]

74 Troubleshooting Guide 9 9 Troubleshooting Guide Refer to the user manual for your PC or graphics card for further instructions on adjustment. How can I change the resolution?  Windows XP: Go to Control Panel Appearance and Themes Display Settings , and adjust the resolution.  Windows ME/2000: Go to Control Panel Display Settings , and adju[...]

75 10 Specifications 10 Specifications 10.1 General (S19C150N / S22C150N) Model Name S19C150N S22C150N Panel Size 18.5 Inches (47 cm) 21.5 Inches (54 cm) Display area 409.8 mm (H) x 230.4 mm (V) 16.1 Inches (H) x 9.1 Inches (V) 476.64 mm (H) x 268.11 mm (V) 18.8 Inches (H) x 10.6 Inches (V) Pixel Pitch 0.300 mm (H) x 0.300 mm (V) 0.012 Inches (H) x[...]

76 Specifications 10 10 Specifications The above specifications are subject to change without notice to improve quality. This device is a Class B digital apparatus. Plug-and-Play This monitor can be installed and used with any Plug- and-Play compatible systems. Two-way data exchange between the monitor and PC system optimizes the monitor settin gs.[...]

77 Specifications 10 10 Specifications 10.2 General (S19C150F / S20C150FL) Model Name S19C150F S20C150FL Panel Size 18.5 Inches (47 cm) 19.5 Inches (49 cm) Display area 409.8 mm (H) x 230.4 mm (V) 16.1 Inches ( H) x 9.1 Inches (V) 432 mm (H) x 239 .76 mm (V) 17 Inches (H) x 9.4 Inches (V) Pixel Pitch 0.300 mm (H) x 0.300 mm (V) 0.012 Inche s (H) x [...]

78 Specifications 10 10 Specifications The above specifications are subject to change without notice to improve quality. This device is a Class B digital apparatus. Environmental consideratio ns Operating Temperatu re : 50°F ~ 104°F (10°C ~ 40°C) Humidity : 10 % – 80 %, non-conden sing Storage Temperature : -4°F ~ 11 3°F (-20°C ~ 45°C) Hu[...]

79 Specifications 10 10 Specifications 10.3 PowerSaver The power-sa ving function of this produ ct reduces p ower consum ption by switch ing off the scree n and controlling the power L ED status if the product is not u sed for a spe cified period o f time. The power is not turne d off in powe r-saving mode. To switch the screen back on, press any k[...]

80 Specifications 10 10 Specifications 10.4 Standard Signal Mode Table  This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Therefore, a resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you se[...]

81 Specifications 10 10 Specifications S20C150FL Resolution Horizontal Frequen cy (kHz) Vertical Frequenc y (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 720 x 400 31.469 70.087 28.322 -/+ VESA, 640 x 480 31.469 59.940 25.175 -/- MAC, 640 x 480 35.000 66.667 30.240 -/- VESA, 640 x 480 37.861 72.809 31.500 -/- VESA, 640 x 480 37.500 75.000 31.500 [...]

82 Specifications 10 10 Specifications S22C150N  Horizontal Frequency The time required to scan a single line from the left to the right side of the screen is called a horizontal cycle. The reciprocal number of a horizontal cycle is called horizontal frequency. Horizontal frequency is measured in kHz.  Vertical Frequency Repeating the same pi[...]

83 Appendix Appendix Contact SAMSUNG WORLD WIDE If you have any questions or comments relati ng to Samsung products, please contact the SAMSUNG customer care center. NORTH AMERICA U.S.A 1-800-SAMSUNG (726-7 864) http://www.samsun g.com CANADA 1-800-SAMSUNG (726-78 64) http:/ /www.samsung.com/ca (English) http://www.samsung.com/ca _fr (French) MEXIC[...]

84 Appendix Appendix GUATEMALA 1-800-299-0013 http://www.samsung .com/latin (Spanish) http://www.samsun g.com/latin_en (English) HONDURAS 800-27919 267 http://www. samsung.com/la tin (Spanish) http://www.samsun g.com/latin_en (English) JAMAICA 1-800-234-7267 http://www.samsung .com NICARAGUA 00-1800-5077267 http://www.samsung .com/latin (Spanish) h[...]

85 Appendix Appendix CYPRUS 8009 4000 on ly from landline (+30) 210 689769 1 from mobil e and land line http://www.sam sung.com CZECH 800 - SAMSUNG (800-726786) http://www.samsu ng.com DENMARK 70 70 19 70 http:/ /www.samsung.com EIRE 0818 717100 http://www.s amsung.com ESTONIA 800-7267 http://www.samsung .com/ee FINLAND 030-6227 515 http://www.sams[...]

86 Appendix Appendix PORTUGAL 808 20 - SAMSUNG (808 20 7267) http://www.samsu ng.com ROMANIA 08008 SAMSUNG (08008 726 7864) TOLL FREE N o. http://www.sam sung.com SERBIA +381 11 321 6899 (old number still active 0700 7267864) http://www.sam sung.com SLOVAKIA 0800 - SAMSUNG (0800-726 786) http://www.s amsung.com SPAIN 902 - 1 - SAMSUNG (902 172 678)[...]

87 Appendix Appendix ASIA PACIFIC AUSTRALIA 1300 362 60 3 http://www.samsun g.com CHINA 400-810-5858 http://www.s amsung.com HONG KONG (852) 3698 - 4698 h ttp://www.samsu ng.com/hk (Chinese) http://www.sam sung.com/hk_en (English) INDIA 1800 3000 8282 1800 266 828 2 http://www.sam sung.com/in INDONESIA 0800-112-8888 021-5699- 7777 http://www.sam su[...]

88 Appendix Appendix KUWAIT 183-2255 (183-CALL) http://www.samsung.com /ae (English) http://www.sam sung.com/ae_ar (Arabic) MOROCCO 080 100 22 55 http://www.samsung.com OMAN 800-SAMSUNG (726-7864) h ttp://www.samsu ng.com/ae (English) http://www.sam sung.com/ae_ar (Arabic) QATAR 800-2255 (800-CAL L) ht tp://www.samsung .com/ae (English) http://www.[...]

89 Appendix Appendix Responsibility for the Pay Se rvice (Cost to Customers) When the service is requested, in spite of in warra nty, we may charge you for a visit from a service technician in the following cases. Not a product defect Cleaning of the product, Adjustme nt, Explanation, Re-installation and etc.  If a service tech nician gives inst[...]

90 Appendix Appendix Correct Disposal Correct Disposal of This Product (Waste Electri cal & Electronic Equipment) (Applicable in countries with separate collection systems) This marking on th e product, acce ssories or literature indicates that the pr oduct and it s electronic acce ssories (e.g. ch arger, headset , USB cable) shou ld not be dis[...]

91 Appendix Appendix Terminology OSD (On Screen Display) On screen display (OSD) a llows you to customize on-scree n settings to optimize the picture quality as required. You can change the screen b rightness, tint, size and many other settin gs using me nus displayed on the screen. Gamma The Gamma menu adju sts the grey sc ale that repr esents mid[...]

92 Appendix Appendix Resolution Resolution is the nu mber of horizonta l pixels and vertical p ixels that form a screen. It repre sents the level of display detail. A higher reso lution displa ys a greater amount of inf ormation on th e screen and is suitable for performing mult iple tasks at the same time. E.g. A resolution of 1366 x 768 consists [...]

Index 93 Index B Before Co nnecting 31 Blue 51 Brightness 40 C Checking the C ontents 19 Cleaning 8 Coarse 47 Color Tone 52 Connecting and Using a PC 33 Contact SAMSUNG WORLD WIDE 83 Contrast 41 Copyright 7 Correct Disposal 90 Correct postur e to use the product 18 Customized Key 63 D Display Time 56 E Eco Saving 59 F Fine 48 G Gamma 53 General 75 [...]

Index Index 94 Sharpness 42 Standard Sign al Mode Table 80 T Terminology 91 Transparenc y 57 Turn Off After 61[...]