Samsung SMC-211FN manual

COLOR MONIT OR SMC-21 1FN / SMC-21 1FP User Guide Mode d’emploi Guía del usuario êìäéÇéÑëíÇé èé ùäëèãìÄíÄñàà Manuale dell'utente Bedienungsanleitung[...]

IMPOR T ANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these Instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sourc[...]

English-3 Graphic Symbol Explanation The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated ‘dangerous voltage’ within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an e[...]

English-4 IMPOR T ANT SAFEGUARDS Caution Power source is indicated on the rear of the set. It contains high-voltage parts. If you remove the cover, it may cause fire or electric shock. Do not remove the cover by yourself. (Control switches are at the front of the monitor.) 1. Read Instructions : All the safety and operating instructions should be r[...]

English-5 8. Accessories : Do not place this monitor on an unstable cart, stand, tripod, bracket or table. The monitor may fall, causing serious injury to a child or adult and serious damage to the appliance. Use only with a cart, stand, tripod. bracket or table recommended by Samsung or sold with the monitor. Any mounting of the monitor should fol[...]

English-6 13. Lightning : For added protection for this monitor during a lightning storm or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the cable system. This will prevent damage to the monitor due to lightning and power-line surges. 14. Overloading : Do not overload wall outlets and[...]

English-7 18. Replacement Parts : When replacement parts are required, be sure the service technician has used replacement parts specified by Samsung or have the same characteristics as the original parts. Unauthorized substitutions may result in fire, electric shock or other hazards. 19. Safety Check : Upon completion of any service or repairs to [...]

English-8 Information to user Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to[...]

English-9 The party responsible for product compliance: SAMSUNG ELECTRONICS CO., LTD. America QA Lab of Samsung 3351 Michelson Drive, Suite #290, Irvine, CA92612 USA IC Compliance Notice This Class (A) digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe (A) respec[...]

English-10 Contents IMPORTANT SAFETY INSTRUCTIONS ...........English-2 IMPORTANT SAFEGUARDS ..............................English-4 FCC information .....................................................English-7 Front Panel Components and Controls .................English-11 SMC-211FN, SMC-211FP • Using buttons on the front panel .................[...]

English-11 SMC-211F Fr ont Panel Components and Controls SMC-21 1F Using buttons on the front panel Power Switch On/off switch. If you press this button, the monitor is turned on and the LED of selected input signal is lit. VIDEO Input Selection Switch It selects video and audio input signal. To change input signal, press this button. VOLUME, DATA [...]

CONTRAST Switch This control adjusts the contrast of the screen image. Press CONTRAST switch and then VOLUME(DATA) switch to control the contrast. BRIGHT Switch This control adjusts the bright of the screen image. Press BRIGHT switch and then VOLUME(DATA) switch to control the bright. COLOR Switch This control adjusts the color intensity of the scr[...]

English-13 Settings Range of Each Button Explanation To select a specific Contrast within the setting range. To select a specific Brightness within the setting range. To select a specific Sharpness within the setting range. To select a specific Color within the setting range. To select specific Tint within the setting range. Settings Range 0~100 0~[...]

Default values of the PRESET settings are : English-14 Default setting 60 50 50 50 Green 50, Red 50 English Preset Contrast Brightness Sharpness Color Tint (NTSC) Language (depending on the model)[...]

English-15 Rear Panel Components and Contr ols VIDEO A (IN) / VIDEO B (IN) This is connector for inputting Video signals. VIDEO A (OUT) / VIDEO B (OUT) This is connector for outputting Video signals. S-VIDEO IN This is S-VIDEO input connector. AUDIO A (IN) / AUDIO B (IN) This is connector for inputting audio signals. AUDIO A (OUT) / AUDIO B (OUT) T[...]

English-16 Connections Camera A Camera B TimeLaps VCR SMC-21 1F[...]

English-17 Maintenance If the quality of the picture on the COLOR MONITOR is poor and cannot be improved, inspect all system connections and cable runs. Repairs should be performed by a qualified technician with adequate test equipment and facilities.[...]

English-18 Specifications SMC-211FPV / SMC-211FNV (NTSC/PAL) 21” diagonal, 0.74 stripe pitch, 90° deflection 2 Channel Input/2 Channel Ouput S-Video INPUT 1.0Vp-p BNC jack 2 Channel Input/2 Channel output Control range of main section 10 0V~2 5 0V or “Indicated on the rear of the MONITOR set” 60Watts (Approximately) 490mm x 444mm x 482mm (wi[...]

Part No.: AA68-03477A-00 Printed in Korea[...]