Samsung SND-5084R manual

NETWORK CAMERA User Manual SND-5084R/SNV-5084R[...]

Copyright ©201 4 Samsung T echwin Co., Ltd. All rights reserved. T rademark is the r egis tere d log o of Sa msung Tech win C o., Ltd . The n ame of t his pr oduc t is th e regi ster ed tra dema rk of S ams ung Techw in Co., L td. Oth er tr adem ark s ment ione d in thi s manu al are t he regi ster ed tr adem ark of t heir r espe cti ve co mpany. [...]

English _3 ● OVERVIEW IMPORT ANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any ventilation openings, Install in accordance with the manufactur er’ s instructions. 8. Do not i[...]

over view 4_ overview W ARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT. Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be pl[...]

English _5 ● OVERVIEW Class construction An apparatus with CLASS construction shall be connected to a MAINS socket outlet with a protective earthing connection. Battery Batteries(battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. Disconnection Device Disconnect the main plug from the ap[...]

over view 6_ overview Please read the following recommended safety precautions carefully. y Do not place this apparatus on an uneven surface. y Do not install on a surface where it is exposed to dir ect sunlight, near heating equipment or heavy cold area. y Do not place this apparatus near conductive material. y Do not attempt to service this appar[...]

English _7 ● OVERVIEW CONTENTS OVERVIEW 3 3 Important Safety Instructions 9 Product Featur es 10 Recommended PC Specifications 10 Recommended Micro SD/ SDHC/SDXC Memory Card Specifications 11 What’ s Included 14 At a Glance (SND-5084R) 18 At a Glance (SNV -5084R) INST ALLA TION & CONNECTION 21 21 Installation (SND-5084R) 23 Installation (SN[...]

over view 8_ overview SETUP SCREEN 72 72 Setup 72 Video & Audio Setup 87 Network Setup 98 Event Setup 115 System Setup APPENDIX 123 123 Specification 128 Product Overview 130 T roubleshooting 132 Open Source Announcement WEB VIEWER 55 55 Connecting to the Camera 57 Password setting 57 Login 58 Installing Silverlight Runtime 61 Installing STW W [...]

English _9 ● OVERVIEW PRODUCT FEA TURES • Dustpr oof/W aterproof (IP66) (SNV -5084R) The dustproof and waterpr oof design makes you feel at ease when installing the product outdoors or exposing it to rain. • IR mode If the IR indicator turns on, the product switches to the IR mode for preventing an object from being too bright, which helps yo[...]

over view 10_ overview RECOMMENDED PC SPECIFICA TIONS • CPU : Intel Core 2 Duo 2.4 GHz or higher (for using 1920x1080 30 fps) Intel Core i7 2.8 GHz or higher (for using 1920x1080 60 fps) ` Web Plug-in is optimized to SSE 4.1 Instruction Set. • Resolution : 1280X1024 pixels or higher (32 bit color) • RAM : 2GB or higher • Supported OS : Wind[...]

English _11 ● OVERVIEW WHA T’S INCLUDED Please check if your camera and accessories are all included in the product package. Appearance Item Name Quantity Description Model Name Camera 1 SND-5084R or SNV-5084R AC 24V / DC 12V RESET VIDEO F W AF T N + - AC 24V / DC 12V RESET VIDEO F W AF T N + - AC 24V / DC 12V RESET VIDEO F W AF T N + - AC 24V [...]

over view 12_ overview Appearance Item Name Quantity Description Model Name Template 1 Product installation guide SND-5084R / SNV-5084R Alarm Cable 1 Useful for alarm connection SND-5084R Tapping Screw 2 Useful for installation on the ceiling, wall, etc. SND-5084R CAUTION: Be w are of the Rated Voltage and Po larit y of the power connec tion. Power[...]

English _13 ● OVERVIEW Appearance Item Name Quantity Description Model Name Tapping Screw 3 Used for installation on the wall or ceiling SNV-5084R Plastic Anchor 3 For fixing a screw, Inserted in a hole (reinforced anchoring force) SNV-5084R Machine Screws 3 Used for assembling the dome case when installing the product on the pipe, wall mount, et[...]

over view 14_ overview A T A GLANCE (SND-5084R) Appearance Item Description a Dome cover Case cover used to protect the lens and the main unit. b Camera Case Housing part that covers the camera body. a b[...]

English _15 ● OVERVIEW Components a AUDIO OUT AUDIO IN k l m n j i f g h e cd b[...]

over view 16_ overview Item Description a Internal Cover It is a cover to protect the main body. b Illumination Sensor Detects incoming light to control the IR LED. c Lens Lens for the camera. d IR LED These infrared LED’s are controlled by the illumination sensor. e Zoom/Focus Control Button T Zoom in (Tele) W Zoom out (Wide) N Focusing on a nea[...]

English _17 ● OVERVIEW Item Description j Micro SD Memory Card Compartment Compartment for the Micro SD memory card. k Audio Out Jack Used to connect to speakers. l Audio In Jack Used to connect to a microphone. m Network Port Used to connect the PoE or Ethernet cable for network connection. n Microphone hole A microphone is embedded.[...]

over view 18_ overview A T A GLANCE (SNV -5084R) Appearance Item Description a Dome cover Case cover used to protect the lens and the main unit. b Camera Case Housing part that covers the camera body. AC 24V / DC 12V RESET VID EO F W AF T N + - AC 24V / DC 12V RESET VID EO F W AF T N + - AC 24V / DC 12V RESET VID EO F W AF T N + - AC 24V / DC 12V R[...]

English _19 ● OVERVIEW Components AC 24V / DC 12V RESET VID EO F W AF T N + - a c b d e f g h j i[...]

over view 20_ overview Item Description a Illumination Sensor Detects incoming light to control the IR LED. b Lens Lens for the camera. c IR LED These infrared LED’s are controlled by the illumination sensor. d Power Port Port for power terminal block. e Test Monitor Out Output port for test monitoring the video output. Use the test monitor cable[...]

English _21 ● INST ALLA TION & CONNECTION installation & connection INST ALLA TION (SND-5084R) Precautions befor e installation Ensure you read out the following instructions before installing the camera: • It must be installed on the ar ea (ceiling or wall) that can withstand 5 times the weight of the camera including the installation [...]

installation & connection 22_ installation & connection Installation 1. Attach the installation template to the selected area and punch 3 holes as shown in the figure. 2. Use the 2 supplied screws to fix the camera to the 2 punched holes. ` Set the < FRONT TOP > mark imprinted on the camera to face the direction of camera monitoring. [...]

English _23 ● INST ALLA TION & CONNECTION INST ALLA TION (SNV -5084R) J ` This camera is waterproof and in compliance with the IP66 spec, but the jack connected to the external cable is not. You are recommended to install this product below the edge of eaves to prevent the cable from being externally exposed. Precautions befor e installation [...]

installation & connection 24_ installation & connection Installation 1. Using the template provided as an accessory , drill the screw installation hole(diameter of 6mm, minimal depth of 55mm) and firmly insert the plastic anchor provided as an accessory to the end. 2. Fit the bottom hole to the anchor hole and insert and fix the taping scre[...]

English _25 ● INST ALLA TION & CONNECTION Connecting waterproof power cable and LAN cable 1. Remove the dome cover and the case. 2. Pull out the long projected part of the rubber plug on the bottom and remove it as shown in the figur e. J ` Use an appropriate cable bush for the LAN cable to be connected. - Basic camera : Use the cable with a [...]

installation & connection 26_ installation & connection 5. Insert the LAN cable into the large hole made by removing the pr ojected part of the rubber plug in step 2 above. 6. Remove the sheath with a cable cutter , and align the cables. 7. Connect the LAN cable with a LAN connector , and insert it into the LAN tool. 8. Connect the finished[...]

English _27 ● INST ALLA TION & CONNECTION Connecting alarm cable 1. Remove the dome cover and the case. 2. Pull out the rubber plug on the bottom as shown in the figure. 3. Insert the alarm cable into the hole made by removing the rubber plug in step 2, and connect the cable with the PCB alarm terminal. 4. Align the cable so that it should no[...]

installation & connection 28_ installation & connection Attaching to the unbundled adapter Choose and purchase a necessary one of the following options (unbundled) that is suitable to the installation site or for your convenience. 1. Remove the dome cover from the case by r eferring to the “ Disassembling ” section. (page 23) 2. Use the[...]

English _29 ● INST ALLA TION & CONNECTION Optional Accessories for Installation For your easier installation, you can purchase appropriate optional accessories available. 1. WALL MOUNT ADAPTOR(SBP-300WM or SBP-300WM1)/HANGING MOUNT (SBP-301HM2 : SND-5084R, SBP-300HM6 : SNV -5084R) This adaptor is used when installing the dome camera onto a wa[...]

installation & connection 30_ installation & connection 3. POLE MOUNT ADAPTOR(SBP-300PM) This is an adaptor for WALL MOUNT ADAPTOR (SBP-300WM or SBP-300WM1) installation on a pole whose diameter is bigger than 80mm. 4. CORNER MOUNT ADAPTOR (SBP-300KM) This is an adaptor for W ALL MOUNT ADAPTOR (SBP-300WM or SBP-300WM1) installation on the c[...]

English _31 ● INST ALLA TION & CONNECTION Adjusting the monitoring direction for the camera (SND-5084R/ SNV -5084R) ` Adjusting the monitoring direction You can adjust the camera direction only when the camera is fixed on the ceiling. Where, rotating the camera unit to the left or right is called Pan, adjusting the tilt is called Tilt, and tu[...]

installation & connection 32_ installation & connection INSERTING/REMOVING A MICRO SD MEMOR Y CARD (SND-5084R/SNV -5084R) J ` Disconnect the power cable from the camera before inserting the Micro SD memory card. ` Do not insert the Micro SD memory card while it’ s upside down by force. Otherwise, it may damage the Micro SD memory card. In[...]

English _33 ● INST ALLA TION & CONNECTION Removing a Micro SD Memory Car d Gently press down on the exposed end of the memory card as shown in the diagram to eject the memory card from the slot. J ` Pressing too hard on the Micro SD memory card can cause the card to shoot out uncontrollably from the slot when released. ` Before removing your [...]

installation & connection 34_ installation & connection MEMOR Y CARD INFORMA TION (NOT INCLUDED) What is a memory card? The memory card is an external data storage device that has been developed to offer an entirely new way to record and share video, audio, and text data using digital devices. Selecting a memory card that’ s suitable for [...]

English _35 ● INST ALLA TION & CONNECTION CONNECTING WITH OTHER DEVICE J ` The CVBS out terminal of the product is provided for easier installation, and is not recommended for monitoring purposes. Monitor to install Power Ethernet < SND-5084R > < SNV-5084R > AC 24V / DC 12V RESET VIDE O F W AF T N + - Monitor to install CAUTIO N: [...]

installation & connection 36_ installation & connection Ethernet Connection Connect the Ethernet cable to the local network or to the Internet. Power Supply (SND-5084R) Use the screwdriver to connect each line (+, –) of the power cable to the corresponding power port of the camera. J ` If both PoE and DC 12V are applied simultaneously , t[...]

English _37 ● INST ALLA TION & CONNECTION Power Cable Specification for Each Model In case of DC 12V Input: Wire Type (AWG) #22 #20 #18 Cable Length (Max.) SND-5084R 24m 38m 60m SNV-5084R In case of AC 24V Input: Wire Type (AWG) #22 #20 #18 Cable Length (Max.) SNV-5084R 34m 55m 88m Network Cable Specification Item Contents Remark Connector RJ[...]

installation & connection 38_ installation & connection Connecting to Audio Input/Output AUDIO OUT AUDIO IN Network PC Microphone Speaker Speaker Speaker Speaker Amp Amp Amp Microphone Microphone Amp Microphone Microphone Speaker[...]

English _39 ● INST ALLA TION & CONNECTION 1. Connect the AUDIO IN port of the camera with the microphone or LINE OUT port of the amplifier that the microphone is connected to. M ` As a microphone is built in, you can use the built-in microphone instead of an external one. (It is applicable only to the SND-5084R model.) 2. Connect the AUDIO OU[...]

installation & connection 40_ installation & connection Connecting to the I/O port box Connect the Alarm I/O cable to the corresponding port of the port box. • ALARM-IN : Used to connect the alarm input sensor or external day/night sensor . • ALARM-OUT : Used to connect the alarm output signal. • GND : Common terminal to connect alarm[...]

English _41 ● INST ALLA TION & CONNECTION T o connect the exter nal sensor Connect one strand of each signal line (2-strand) of the sensors to the [ ALARM IN ] port, and connect the other strand to the [ GND ] port. Alarm In Wiring Diagram T o connect the alarm out If devices (e.g., flashing light and siren) that exceed the voltage and curren[...]

42_ network connection and setup network connection and setup Y ou can set up the network settings according to your network configurations. CONNECTING THE CAMERA DIRECTL Y TO LOCAL AREA NETWORKING Connecting to the camera from a local PC in the LAN 1. Launch an Internet browser on the local PC. 2. Enter the IP address of the camera in the addr ess[...]

English _43 ● NETWORK CONNECTION AND SETUP CONNECTING THE CAMERA DIRECTL Y TO A DHCP BASED DSL/CABLE MODEM 1. Connect the user PC directly with the network camera. 2. Run the IP Installer and change the IP address of the camera so that you can use the web browser on your desktop to connect to the Internet. 3. Use the Internet browser to connect t[...]

44_ network connection and setup network connection and setup CONNECTING THE CAMERA DIRECTL Y TO A PPPoE MODEM 1. Connect the user PC directly with the network camera. 2. Run the IP Installer and change the IP address of the camera so that you can use the web browser on your desktop to connect to the Internet. 3. Use the Internet browser to connect[...]

English _45 ● NETWORK CONNECTION AND SETUP CONNECTING THE CAMERA TO A BROADBAND ROUTER WITH THE PPPoE/CABLE MODEM This is for a small network environment such as homes, SOHO and ordinary shops. Configuring the network settings of the local PC connected to a Broadband Router Configuring the network settings of the local PC connected to a Broadband[...]

46_ network connection and setup network connection and setup BUTTONS USED IN IP INST ALLER Item Description a Device Name Model name of the connected camera. Click the column to sort the list by model name. However, search will be stopped if clicked during the search. b Alias This function is not currently implemented. c Mode Displays either < [...]

English _47 ● NETWORK CONNECTION AND SETUP Item Description g URL DDNS URL address enabling access from the external Internet. However, this will be replaced with the < IP Address > of the camera if DDNS registration has failed. h IPv4 Scans for cameras with the IPv4 setting. i IPv6 Scans for cameras with the IPv6 setting. Activated in an I[...]

48_ network connection and setup network connection and setup 3. In the < Address > pane, pr ovide the necessary information. • MAC (Ethernet) Address : The MAC address imprinted on the camera label is automatically displayed and requir es no user setting. M ` IP related parameters can be set only when DHCP is not checked. If not using a Br[...]

English _49 ● NETWORK CONNECTION AND SETUP If using a Broadband Router • IP Addr ess : Enter an address falling in the IP range provided by the Br oadband Router . ex) 192.168.1.2~254, 192.168.0.2~254, 192.168.XXX.2~254 • Subnet Mask : The < Subnet Mask > of the Broadband Router will be the < Subnet Mask > of the camera. • Gatew[...]

50_ network connection and setup network connection and setup Auto Network Setup Run < IP Installer_v2.XX.exe > to display the camera search list. At the initial startup, both [ Auto Set ] and [ Manual Set ] will be grayed out. M ` For cameras found with the IPv6 setting, these buttons will be grayed out as the cameras do not support this fun[...]

English _51 ● NETWORK CONNECTION AND SETUP DYNAMIC IP SETUP Dynamic IP Environment Setup • Example of the Dynamic IP envir onment - If a Broadband Router , with cameras connected, is assigned an IP addr ess by the DHCP server - If connecting the camera directly to modem using the DHCP pr otocols - If IPs are assigned by the internal DHCP server[...]

52_ network connection and setup network connection and setup PORT RANGE FOR W ARD (POR T MAPPING) SETUP If you have installed a Broadband Router with a camera connected, you must set the port range forwarding on the Broadband Router so that a remote PC can access the camera in it. Manual Port Range Forwarding 1. From the Setup men u of the Broadba[...]

English _53 ● NETWORK CONNECTION AND SETUP Setting up Port Range Forward for several network cameras When several network cameras are connected to one Broadband Router device, you should forward the TCP 943 port of the router to the TCP 943 port of a connected camera. J ` If you don't set properly the TCP 943 port of the router , you cannot [...]

54_ network connection and setup network connection and setup CONNECTING TO THE CAMERA FROM A SHARED LOCAL PC 1. Run the IP Installer . It will scan for connected cameras and display them as a list. 2. Double-click a camera to access. The Internet browser starts and connects to the camera. M ` Access to the camera can also be gained by typing the c[...]

English _55 ● WEB VIEWER web viewer CONNECTING TO THE CAMERA Normally , you would 1. Launch the Internet browser . 2. T ype the IP addr ess of the camera in the address bar . ex) • IP address (IPv4) : 192.168.1.100  http://192.168.1.100 - the Login dialog should appear . • IP address (IPv6) : 2001:230:abcd: ff ff:0000:0000:ff ff:1111  h[...]

56_ web viewer web viewer Connecting via UPnP 1. Run the client or operating system in support of the UPnP protocol. 2. Click the camera name for search. In the Windows operating system, click the camera name searched fr om the network menu. - The login window is displayed. Connecting via Bonjour 1. Run the client or operating system in support of [...]

English _57 ● WEB VIEWER P ASSWORD SETTING When you access the product for the first time, you must register the login password. When the “ Password change ” window appears, enter the new password. J ` The new password should be a combination of at least three types of uppercase/lowercase letters, numbers and special characters with eight to [...]

58_ web viewer web viewer INST ALLING SIL VERLIGHT RUNTIME If your PC has not installed Silverlight Runtime or has just installed an old runtime version, you will be redirected to the Silverlight Runtime installation page automatically when accessing the web viewer. T o install on Windows OS 1. Click < Click Here >. 2. When the file download [...]

English _59 ● WEB VIEWER T o install on MAC OS 1. Run the file trailing with “.dmg”. 2. Run the install package file automatically created, ending with “.pkg”. 3. Click < Continue >. 4. Select your language on the language selection screen, and click < Continue >.[...]

60_ web viewer web viewer 5. Click < Agree >. 6. Click < Install >. 7. Enter the password of the account currently logged in, and click < Install Software > and continue. 8. Once completed, click < Close >.[...]

English _61 ● WEB VIEWER INST ALLING STW WebViewer PLUGIN If connecting to a camera for the first time, you will see the installation message. Then, install the required WebViewer Plugin to access the camera and control the video from it in real time. 1. When the monitoring page is accessed for the very first time, the installation page is displa[...]

62_ web viewer web viewer 5. Click [ OK ]. The old version of Web Viewer Plug-in is deleted. 6. Click [ Install ] to begin installation of the Web Viewer Plug-in. 7. Click [ Finish ]. STW Web Viewer Plug-in installation is completed. J ` In your internet explorer , if you need to move to the installation screen after installing the STW webviewer pl[...]

English _63 ● WEB VIEWER USING THE LIVE SCREEN Item Description a Monitoring Move to the monitoring screen. b Playback Switch to the monitoring screen that plays recording data in the Micro SD memory. c Setup Move to the Setup screen. d Viewer Screen Displays the Live video on the screen. ` Y ou can use the mouse wheel to activate the digital zoo[...]

64_ web viewer web viewer Item Description h Full Screen Switch the current video to the maximum size of the monitor. i Capture Saves the snapshot as an image file in the .bmp or .jpg format. j Audio/Microphone Control Enable Audio and Microphone are control the Audio volume. ` Only the Audio volume can be controlled. k Alarm output Activate the Al[...]

English _65 ● WEB VIEWER T o fit the full screen 1. Click the [ Full Screen ( ) ] button. 2. This will fit the Viewer to the full screen. 3. T o exit the full scr een mode, press [ Esc ] on the keyboard. M ` For the Internet Explorer and Google Chrome browser , you can switch to the full screen. T o Use Audio 1. Click [ Audio ( ) ] icon to activa[...]

66_ web viewer web viewer PLA YING THE RECORDED VIDEO M ` Before you can play the video, you must configure the record settings. For details on record settings, refer to “ Storage ”. (page 99) Name of event search scr een and its function Item Description a Search range setting Set the search date and time from the data saved in the Micro SD me[...]

English _67 ● WEB VIEWER T o play the content after searching by event 1. Click the [ Playback ( ) ] button. 2. Specify the start time and end time of your search. 3. Select an event type for your search within the specified period. 4. Click the [ Event search ] button. The search r esults will be displayed in the list. M ` If more than 800 event[...]

68_ web viewer web viewer Name of time search scr een and its function Item Description a Time bar The section in the specific period is played by moving the time bar. b Search date setting Set the search date using the calendar. ` Dates for which there is video in the Micro SD memory card are displayed within the boxes on the calendar . c Screen o[...]

English _69 ● WEB VIEWER T o play after searching by time 1. Click [ Time Search ( ) ]. 2. Click a desired date in the calendar . The video on the specified date will be played. 3. If the video playback is stopped, select a time and click [ Play ( ) ]. The video on the selected time will be played. 4. While the video is being played, the recor di[...]

70_ web viewer web viewer T o back up the searched video 1. During playback, click [ ] on the scene to back up. The scheduling window for backup start and end time appears. 2. Click [ ] button. The Save As window appears. 3. Confirm the save path and click [ Save ] button. The screenshot will be backed up to the specified path. T o play the backup [...]

English _71 ● WEB VIEWER T o Play an A VI File J ` The AVI file does not contain the recording time data. 1. Separate the micro SD memory car d from the camera. J ` Before separating the micro SD memory card, set the < Device > to < Off > in the “ Setup  Event  Storage ” menu. 2. Insert the micro SD memory car d into the PC.[...]

setup screen SETUP You can configure the video & audio, network, event and system settings of the camera in the network. 1. In the Live screen, click [ Setup ( ) ] . 2. The Setup screen appears. J ` Microsoft Silverlight 5.0 or higher is required to be installed on the PC for setup pages that provide preview video. If not installed already , au[...]

• E-mail/FTP pr ofile : Video profile to be transferr ed to the specified email or FTP site. ` Only the MJPEG codec can be set as the E-mail/FTP profile. • Recor d profile : This is the pr ofile that is applied to video recor ding. • Audio-In : Sets whether to use audio for video r ecordings. 6. According to your situation, set A TC (Auto T r[...]

setup screen T o Add/Change the Video Profile The profile setup can be added or modified to accommodate various profiles depending on the recording conditions. 1. Select one from the < Video profile > options. 2. Provide the name and select a codec. 3. Specify the conditions under which the codec will be applied. 4. Specify the details of the[...]

• Encoding priority : Y ou can set the video transfer method to Framerate or Compression. • GOV length : It specifies the distance (in terms of number of frames) between two consecutive I-Frames in a video sequence when H.264 codec was selected. (One I-Frame + 0~Several P-Frames) • Pr ofile : Y ou can select the H.264 profiling method. • En[...]

setup screen T o Use Cr op Encoding 1. Select < Use >. 2. Click < Set area >. The Crop Encoding Ar ea Setup window will pop up. 3. Select < Ratio >. • Ratio: It sets up the aspect ratio of the user specified area. - 4:3 : The aspect ratio shall be set to 4:3 as close as to the user specified area. The supporting size ranges from[...]

Video setup 1. From the Setup menu, select the < Video & Audio ( ) > tab. 2. Click < Video setup >. 3. Select a < Video source > mode. • Flip mode : T urn upside down the image that is captured by the camera. • Mirr or mode : Flip horizontal the image that is captured by the camera. 4. Select Able or Disable for the analog[...]

setup screen Audio setup You can configure the I/O settings of the audio source from the camera. 1. From the Setup menu, select the < Video & Audio ( ) > tab. 2. Click < Audio setup >. 3. Set the audio input value. • Sour ce : Sets the audio input. - Line : Connect the cable to the audio device. - Internal microphone : Microphone [...]

Camera setup You can change the camera settings according to the environment where the camera is located. 1. From the Setup menu, select the < Video & Audio ( ) > tab. 2. Click < Camera setup >. 3. Configure the settings as necessary of : Sensor , SSDR, White balance, Back light, Exposure, Day/Night, Special, OSD, IR 4. When done, c[...]

setup screen T o Set SSDR (Samsung Super Dynamic Range) In a scene where the difference between bright and dark is severe, you can increase the brightness of the dark area alone to regulate the overall brightness. 1. Select < SSDR >. 2. Set < Mode > to < On >. 3. Configure the < Level > and < D-Range > settings as nece[...]

T o Set BLC You can specify a desired area on the video manually and set the area to be displayed more clearly. 1. Select < Back light >. 2. Set < Mode > to < BLC >. 3. Set < BLC level >. Y ou can change the level to adjust the brightness of the monitoring area. 4. Set the < T op, Bottom, Left, Right > levels to specif[...]

setup screen T o Set Exposur e You can adjust the exposure level of the camera. 1. Select < Exposure >. 2. Select each item and set it properly . • Brightness : Adjust the scr een brightness. • Minimum shutter : The limit of the longest exposure time. ` Shutter is the mode to set up the range of the sensor exposure time which will specify[...]

T o Set Day/Night 1. Select < Day/Night >. 2. Select each item and set it properly . • Mode: Mode is used to adjust the color of Color or Black and White. - Color : The video is always output in color. - B/W : The video is always output in black and white. - Auto : Normally, it is set to Color but to B&W under low luminance at night. ` [...]

setup screen T o Setup Special 1. Select < Special >. 2. Select each item and set it properly . • Sharpness Mode : Adjust the overall sharpness of the image. If selecting < On >, you can adjust the sharpness of the image. • Sharpness level : The higher the level is, the sharper and clearer the outline of the image becomes. • Gamma[...]

T o Set OSD 1. Select < OSD >. 2. Select each item and set it properly . • Title overlay : It specifies if the camera name shall be displayed on the screen. • Camera title : It specifies the name of the camera to be displayed on the screen. • Title position X, Y : It specifies the position of the camera name on the scr een. • Time dis[...]

setup screen Focus setup You can adjust the focus and zoom ratio of video image. 1. From the Setup menu, select the < Video & Audio ( ) > tab. 2. Click < Focus setup > . 3. Set the focus and zoom. • Focus : Manually adjusts the lens focus (Far  Near). • Zoom : Manually adjusts the zooming (Wide  T ele). • Simple focus : [...]

NETWORK SETUP Interface 1. From the Setup menu, select the < Network ( ) > tab. 2. Click < Interface >. 3. Set the < Interface > and < IPv6 setup > as necessary . • IP type : Select an IP connection type. - Manual : Specify the IP address, Subnet mask, Gateway , DNS1, and DNS2. - DHCP : Specify the DNS1 and DNS2. - PPPoE :[...]

setup screen Port 1. From the Setup menu, select the < Network ( ) > tab. 2. Click < Port >. 3. T ype in each item in the Port menu as necessary . ` When setting your ports, you cannot use port numbers such as 0~1023, 3702 or 49152. • HTTP port : HTTP port used to access the camera via the web browser . The default is 80(TCP). ` Setti[...]

DDNS DDNS is an abbreviation of Dynamic Domain Name Service that converts the IP address of a camera into a general Host Name so that the user can easily remember it. 1. From the Setup menu, select the < Network ( ) > tab. 2. Click < DDNS >. 3. Select the < DDNS > connection type. 4. T ype in the DDNS items accor ding to the selec[...]

setup screen Registering with DDNS T o r egister your product with the Samsung DDNS 1. Visit the iPOLiS web site (www .samsungipolis.com) and sign in with a register ed account. 2. From the top menu bar , select < DDNS SERVICE > - < MY DDNS >. 3. Click [ PRODUCT REGISTRA TION ]. 4. Enter the product ID. ` Y ou must perform the duplicate[...]

T o connect to the Samsung DDNS in camera setup 1. From the DDNS setup page, set < DDNS > to < Samsung DDNS >. 2. Provide the < Pr oduct ID > that you register ed product ID with the DDNS site. 3. Click [ Apply ( ) ]. When the connection is successfully made, you will see the message of < (Success) > on the screen. Configuri[...]

setup screen IP filtering You can create a list of IPs that you want to grant or deny access to them. 1. From the Setup menu, select the < Network ( ) > tab. 2. Click < IP filtering >. 3. Select < Filtering type >. • Deny : If selecting this, access fr om those IPs that are added to the filtering will be restricted. • Allow : [...]

SSL You can select a secure connection system or install the public certificate for this purpose. 1. From the Setup menu, select the < Network ( ) > tab. 2. Click < SSL >. 3. Select a secure connection system. ` T o access the camera using HTTPS mode, you have to type the IP address for the camera in the form of “https://<Camera_IP[...]

setup screen 802.1x When connecting network, you can choose whether using 802.1x protocol, and then install the certification. 1. From the Setup menu, select the < Network ( ) > tab. 2. Click < 802.1x >. 3. Set the < IEEE 802.1x setting(EAPOL using EAP-TLS) >. • Enable IEEE 802.1x : Specify the use of the 802.1x protocol. • EA[...]

QoS You can specify the priority to secure a stable transfer rate for a specific IP. 1. From the Setup menu, select the < Network ( ) > tab. 2. Click < QoS >. 3. Click the [ Add ( ) ] button. The IP list will be created. 4. Enter an IP address to which you will apply QoS. M ` The default prefix for IPv4 is 32; For DSCP , the default is [...]

setup screen • Enable SNMP T rap : SNMP trap is used to send important events and conditions to the Admin. - Community : Enter the trap community name to receive messages. - IP address : Enter the IP address to which messages will be sent. - Authentication failure : It specifies whether an event shall be generated when the community information i[...]

UPnP discovery Cameras can be automatically searched in the client and operating system in support of the UPnP protocol. 1. From the Setup menu, select the < Network ( ) > tab. 2. Click < UPnP discovery >. 3. Set the < UPnP discovery >. • UPnP discovery : It specifies Able or Disable for UPnP Discovery . • Friendly name : Disp[...]

setup screen EVENT SETUP FTP / E-mail You can configure the FTP/E-mail server settings so that you can transfer the images taken with camera to your PC if an event occurs. 1. From the Setup menu, select the < Event ( ) > tab. 2. Click < FTP / E-mail >. 3. Select < FTP configuration > or < E-mail configuration > and enter / s[...]

• E-mail configuration - Server address : Enter the IP addr ess of the email server that you transfer the alarm or event images to. - Use authentication : Select whether to use authorization. - Use SSL : Specify the use of SSL. - ID : Enter the user ID for logging into the email server . - Password : Enter the user account passwor d for logging i[...]

setup screen T o make r ecording on the Micr o SD memory 1. Check the memory card’ s < Free size > and < T otal size >. 2. Otherwise, check the stored data and if you find them not important, then click < Format > to format the Micro SD memory . ` Some frames may be skipped if the micro SD memory card operates at the lower speed[...]

Alarm input You can set the alarm input type, activation time, and operation mode. 1. From the Setup menu, select the < Event ( ) > tab. 2. Click < Event setup >. 3. Select < Alarm input > from < Event action setup >. 4. Set whether or not to < Enable >. 5. Specify an input device. • T ype - Normal open : It is norma[...]

setup screen 7. Specify an operation that will perform if an alarm occurs. • FTP : Specify the use of FTP transfer in the alarm input setup. • E-mail : Specify the use of email transfer in the alarm input setup. • Recor d : Specify the use of recor ding in the alarm input setup. • Alarm output : Select whether to set the alarm output if an [...]

T ampering detection You can set to detect tampering attempts and trigger events, such as sudden change of camera’s framing direction, blocked lens and other overall change of scenes from the video. 1. From the Setup menu, select the < Event ( ) > tab. 2. Click < Event setup >. 3. Select < T ampering detection > from < Event [...]

setup screen Motion detection / Video analytics Events of motion detection and video analysis can be set to trigger event signal output. 1. From the Setup menu, select the < Event ( ) > tab. 2. Click < Event setup >. 3. Select < Motion detection / Video analytics > from < Event action setup >. 4. Set whether or not to < E[...]

J ` Motion detection and Video analytics cannot be used simultaneously . ` Before using, set the minimum and maximum motion sizes to suit desired motion range to be detected. ` Detected size of an object may have difference with the actual size according to its shape. ` Up to 16 objects from the top side of the screen can be displayed. ` If camera [...]

setup screen T o use Motion detection It detects a motion that meets all conditions specified by sensitivity, size and area. 1. Select a motion detection mode. 2. Select < Sensitivity > tab to set the sensitivity level. Y ou can set the sensor’ s sensitivity to detect a motion out of the background fr om the monitoring video. J ` In a situa[...]

4. Select < Area > tab. Y ou can specify an area on the scr een to include or exclude the area to/fr om detection. Y ou can specify up to 4 areas. • Detection ar ea : Sets the entire screen as excluded fr om detection, and adds specified area as motion detection area. Select 4 vertices in the image with your mouse to specify the detection a[...]

setup screen T o use Video analytics It detects event that meets all conditions specified by sensitivity, size and area and the event condition rules. 1. Select the video analysis mode. 2. Set < Sensitivity >, < Size > and < Area >. For further details on settings, refer to “ T o use Motion detection ”. (Page 106~107) 3. Selec[...]

T o set the video analysis rules ` Passing 1. Set the type to < Passing >. 2. On the screen, click on pr eferred starting and ending point of the virtual line, then a popup window appears. 3. Select the desired rule: • Right : Detects motions of moving from the left to the right, over the virtual line. • Left : Detects motions of moving f[...]

setup screen ` Appearing (Disappearing) 1. Set the analysis type to < Appearing (Disappearing) >. 2. Select the desired event rule: • Defined ar ea based rules : It detects event of appearing object that appears in the area and r emaining for a certain time period while not passing through the ar ea borders, and opposite case of disappearin[...]

Face detection You can set to detect recognized face and trigger an event accordingly. 1. From the Setup menu, select the < Event ( ) > tab. 2. Click < Event setup >. 3. Select < Face detection > from < Event action setup > . 4. Set whether or not to < Enable >. 5. Select < Sensitivity > tab to set the sensitivit[...]

setup screen Audio detection You can set to detect sound over the specified level and trigger an event accordingly. 1. From the Setup menu, select the < Event ( ) > tab. 2. Click < Event setup >. 3. Select < Audio detection > from < Event action setup >. 4. Set whether or not to < Enable > . 5. Set the audio detection?[...]

Network disconnection You can receive and save events of a physically disconnected network. 1. From the Setup menu, select the < Event ( ) > tab. 2. Click < Event setup >. 3. Select < Network disconnection > from < Event action setup >. 4. Set whether or not to < Enable > . 5. Specify the activation time and activation[...]

setup screen Alarm output setup 1. From the Setup menu, select the < Event ( ) > tab. 2. Click < Alarm output setup >. 3. Set the camera’ s type of alarm output. ` If you change the alarm output type, the alarm out button on the monitoring page and alarm output type displayed on Event Setup page will be changed accordingly . • T ype[...]

SYSTEM SETUP Product information 1. From the Setup menu, select the < System ( ) > tab. 2. Click < Product information >. 3. Check the camera information, or provide details accor ding to your network environment. • Model : Model name of the pr oduct. • Serial number : Pr oduct serial number . • Device name : Pr ovide a device nam[...]

setup screen Date & Time 1. From the Setup menu, select the < System ( ) > tab. 2. Click < Date & Time >. 3. Specify the time and date that will be applied to the camera. • Curr ent system time : Displays the current time settings of your system. • Timezone : Specify the local time zone based on the GMT . • Use daylight sa[...]

User 1. From the Setup menu, select the < System ( ) > tab. 2. Click < User >. 3. Provide the necessary user information. • Administrator passwor d change : Change the password for the administrator . J ` For the security purposes, you are recommended to use a combination of numbers, alphabets uppercase and lowercase and special chara[...]

setup screen - If the existing password is not matched, when you change the admin password, you cannot change the password. - After changing your password, if there is a camera connected to a CMS or NVR client, then you need to re-register it with the newly changed password. If the camera is still connected with the same password, then the account [...]

Upgrade / Reboot 1. From the Setup menu, select the < System ( ) > tab. 2. Click < Upgrade / Reboot >. 3. Select a desired item and set it appropriately . • Upgrade : Performs upgrading the system. • Factory default : Resets the system to the factory default. - Except network parameter : Initialize all setup parameters except for ne[...]

setup screen M ` It may take a max of 20 minutes for the upgrade process. If you forcibly terminate the upgrade process, upgrade will not be completed properly . ` During restarting the system, accessing with web viewer will not be made. ` Y ou can download the latest version from the Samsung web site (www .samsungcctv .com). T o back up the curr e[...]

Log You can check the system log or event log. 1. From the Setup menu, select the < System ( ) > tab. 2. Click < Log >. 3. Select a log type. • System : Y ou can check the system logs where any system changes are r ecorded including the time information. • Event : Y ou can check the event logs including the time information. 4. From[...]

setup screen Profile access You can check the profile information. 1. From the Setup menu, select the < System ( ) > tab. 2. Click < Profile access >. • Pr ofile access : Show the information of the newly added profile. - Profile : Show the information of the newly added codec. - Bitrate(kbps) : Show both the actual bit rate and the s[...]

appendix SPECIFICA TION Items Description SND-5084R SNV-5084R Video Imaging Device 1/3” PS Exmor 1.37M CMOS (IMX238) Total Pixels 1, 312(H) x 1,069(V) Effective Pixels 1, 305(H) x 1,049(V) Scanning System Progressive Min. Illumination Color : 0.05 Lux (1/30sec, F1.2, 50IRE), 0.0008 Lux (2sec, F1.2, 50IRE) B/W : 0 Lux (IR LED on) S / N Ratio 50dB [...]

appendix Items Description SND-5084R SNV-5084R Operational IR LED 12 ea Viewable Length 30m(98.43ft) Camera Title Off / On (Displayed up to 40 characters) Day & Night Auto (ICR) / Color / B/W / External / Schedule Backlight Compensation Off / BLC / WDR Wide Dynamic Range 130dB  Contrast Enhancement SSDR (Samsung Super Dynamic Range) (Off / O[...]

Items Description SND-5084R SNV-5084R Operational Intelligent Video Analytics Audio Detection, Face Detection, Tampering, Virtual Line, Enter/Exit, Appear / Disappear Remote Control Interface - Alarm I/O Input 1ea / Output 1ea Alarm Triggers Motion detection, Tampering, Audio Detection, Face Detection, Video Analytics, Alarm Input, Network Disconne[...]

appendix Items Description SND-5084R SNV-5084R Network Video Quality Adjustment H.264 : Compression Level, Target Bitrate Level Control MJPEG : Quality Level Control Bitrate Control Method H.264 : CBR or VBR M-JPEG : VBR Streaming Capability Multiple Streaming (Up to 10 Profiles) Audio Compression Format G.711 µ-law /G.726 Selectable G.726 (ADPCM)[...]

Items Description SND-5084R SNV-5084R Network Application Programming Interface ONVIF Profile-S SUNAPI(HTTP API) SVNP 1.2 Webpage Language English, French, German, Spanish, Italian, Chinese, Korean, Russian, Japanese, Swedish, Denish, Portuguese, Czech, Polish, Turkish, Rumanian, Serbian, Dutch, Croatian, Hungarian, Greek, Norway, Finland Web Viewe[...]

appendix PRODUCT OVERVIEW SND-5084R Unit : mm (inch) 128_ appendix 118 (4.65") Ø 132.1 (5.2") Ø 97 (3.82") 107.6 (4.24")[...]

SNV -5084R Unit : mm (inch) English _129 ● APPENDIX 69.5 (2.74") 118.5 (4.67") Ø 160 (6.3") Ø 100 (3.94")[...]

appendix TROUBLESHOOTING PROBLEM SOLUTION I can’t access the camera from a web browser. y Check to make sure that the camera’s Network settings are appropriate. y Check to make sure that all network cables have been connected properly. y If connected using DHCP, verify that the camera is able to acquire dynamic IP addresses without any problem.[...]

PROBLEM SOLUTION <Motion detection / Video analytics> of <Event setup> is set to <Enable>, but no notification e-mail reaches me even when an analysis event had occurred. y Verify the settings in the following sequence: A. Check <Data & Time> settings. B. The <Motion detection / Video analytics> should be set to &l[...]

OPEN SOURCE ANNOUNCEMENT GPL/LGPL software license The software included in this product contains copyrighted softwar e that is licensed under the GPL/LGPL. Y ou may obtain the complete Corresponding Source code fr om us for a period of three years after our last shipment of this product by sending email to help.cctv@samsung.com. If you want to obt[...]

GNU GENERAL PUBLIC LICENSE V ersion 2, June 1991 Copyright (C)1989, 1991 Free Software Foundation, Inc. 51 Franklin Street,Fifth Floor , Boston, MA 02110-1301, USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away y[...]

3. Y ou may copy and distribute the Program (or a work based on it, under Section 2)in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following : a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 a[...]

NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW . EXCEPT WHEN OTHERWISE ST A TED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER P ARTIES PROVIDE THE PROGRAM “ASIS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED T[...]

Finally , every program is threatened constantly by software patents. States should not allow patents to restrict development and use of software on general-purpose omputers, but in those that do, we wish to avoid the special anger that patents applied to a free program could make it ffectively proprietary . T o prevent this, the GPL assures that a[...]

5. Conveying Modified Source V ersions. Y ou may convey a work based on the Program, or the modifications to produce it from the Pr ogram, in the form of source code under the terms of section 4, provided that you also meet all of these conditions: a) The work must carry prominent notices stating that you modified it, and giving a relevant date. b)[...]

7. Additional T erms. “Additional permissions” are terms that supplement the terms of this License by making exceptions from one or more of its conditions. Additional permissions that are applicable to the entire Program shall be tr eated as though they were included in this License, to the extent that they are valid under applicable law . If a[...]

In the following three paragraphs, a “patent license” is any express agreement or commitment, however denominated, not to enforce a patent (such as an express permission to practice a patent or covenant not to sue for patent infringement). T o “grant” such a patent license to a party means to make such an agreement or commitment not to enfo[...]

OpenSSL Combined License The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License and the original SSLeay license apply to the toolkit. See below for the actual license texts. Actually both licenses are BSD-style Open Source licenses. In case of any license issues related to OpenSSL please contact openssl-core[...]

BSD License Some software components of this product incorporate sour ce code covered under the BSD license as follows. Component Name License URL net-snmp-5.7.1 pcre-8.20 openssh-5.9p1 libcap-1.2.1 lighttpd-1.4.31 Game-ws MiniUPnP Project Client pppd-2.4.5 BSD BSD BSD BSD 2.0 BSD 2.0 BSD 2.0 BSD 2.0 BSD 3.0 http://www .net-snmp.org/about/license.h[...]

3. Neither the name of the Regents of the University of California nor the names of its contributors may be used to endorse or promote products derived fr om this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,[...]

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT ABILITY AND FITNESS FOR A P ARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT , INDIRECT , INCIDENTA[...]

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT ABILITY AND FITNESS FOR A P ARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT , INDIRECT , INCIDENTA[...]

The MIT License Some software components of this product incorporate sour ce code covered under the MIT license as follows MIT License 2.0 - Acewidget, bettermeans, jquery-ui, libxml, libxml2, Mesa3D-MesaLib,mwEmbed,OpenGL Samples Pack, Wide Studio, xorg-server , dropbear-2012.55, ncurses-5.7 Copyright (c) 2011, The Dojo Foundation Copyright 2010, [...]

1.11. ‘’Source Code’ ’ means the preferred form of the Cover ed Code for making modifications to it, including all modules it contains, plus any associated interface definition files, scripts used to control compilation and installation of an Executable, or source code differ ential comparisons against either the Original Code or another we[...]

3.5. Required Notices. Y ou must duplicate the notice in Exhibit A in each file of the Source Code. If it is not possible to put such notice in a particular Source Code file due to its structure, then Y ou must include such notice in a location (such as a relevant directory) wher e a user would be likely to look for such a notice. If Y ou created o[...]

8.3. If Y ou assert a patent infringement claim against Participant alleging that such Participant’ s Contributor Version dir ectly or indirectly infringes any patent where such claim is r esolved (such as by license or settlement) prior to the initiation of patent infringement litigation, then the reasonable value of the licenses granted by such[...]

The Independent JPEG Group’ s JPEG Software The software included in this product contains copyrighted softwar e that is licensed under the JPEG license. • JPEG license - Code project – Generating Outline OpenGL, Libjpeg This distribution contains the sixth public release of the Independent JPEG Group’ s free JPEG software. Y ou are welcome[...]

T -Ker nel License - This Product uses the Source Code of T -Kernel under T -License granted by the T -Engine Forum(www .t-engine.org) T -License [License Agreement for Source Code of T -Kernel] established by T -Engine Forum on January 23, 2004 revised on June 17, 2004 revised on December 21, 2006 revised on March 24, 2009 Article 1. Scope of Lice[...]

Article 4. License of Source Code 1. As provided for in this Article, T -Engine Forum shall provide, and grant a license to use, the Source Code fr ee of charge to any person who has taken the necessary procedure for r egistration as prescribed by T -Engine Forum and agreed to the T -License. 2. The Source Code shall be distributed exclusively by T[...]

T -Kernel. Provided, however , that the Ported Source Code may be treated in the same way as the Modified Source Code until the time of registration hereunder . 5. The provision set forth in Article 3 shall apply to the Ported Source Code register ed in accordance with this Article. Article 7. Use for Other Purpose 1. Any use of the Source Code, th[...]

authorized to submit on behalf of the copyright owner . For the purposes of this definition, "submitted" means any form of electronic, verbal, or written communication sent to the Licensor or its representatives, including but not limited to communication on electronic mailing lists, source code contr ol systems, and issue tracking system[...]

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer . 2. The origin of this software must not be misrepr esented; you must not claim[...]

PHP 3.01 License The PHP License, version 3.01 Copyright (c) 1999 - 2010 The PHP Group. All rights reserved. Component Name License URL php-5.2.17 PHP 3.01 http://www.php.net/distributions Redistribution and use in source and binary forms, with or without modification, is permitted provided that the following conditions are met: 1. Redistributions [...]

Samsung Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products. The Eco mark represents Samsung Techwin’s devotion to creating environmentally friendly products, and indicates that the product satisfies the EU RoHS Directive. This equipment has[...]

[...]

SALES NETWORK SAMSUNG TECHWIN CO ., L TD. Samsung T echwin R&D Center , 6, Pangyo-ro 319beon-gil, Bundang-gu, Songnam-si, Gyeonggi-do 463-400, Korea TEL : +82-70-7147-8740~60 F AX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 T oll Free : +1-877-213-1222 Direct : +1-201-325-6920 Fax : +1-[...]