Samsung SP43H3HT manual

COLOUR TELEVISION SP43H3HT Owner’ s Instructions Before operating the unit, please read this manual thoroughly , and retain it for future reference. P ICTURE I N P ICTURE (PIP) TELETEXT S ELF F OCUS BP68-00341A (J61A_Euro_ENG) 2004/07/29 11:16 AM Page 1[...]

BP68-00341A (J61A_Euro_ENG) 2004/07/29 11:16 AM Page 2[...]

English - 3 Impor tant W arranty Inf ormation Regarding T elevision F ormat V iewing S tandard screen format televisions (4:3, the aspect ratio of the screen width to height) are primarily designed to view standard format full-motion video. The images displayed on them should primarily be in the standard 4:3 ratio format and constantly moving. Disp[...]

English - 4 Contents ◆ F OREWORD ■ Important Warranty Information Regarding Television Format Viewing ........ 3 ◆ C ONNECTING AND P REP ARING Y OUR T ELEVISION ■ Control Panel ................................................................................................. 6 ■ Connection Panel ............................................[...]

English - 5 Contents (continued) ◆ U SING Y OUR T ELEVISION (continued) ■ Selecting the Sound Mode ............................................................................ 48 ■ Setting and Displaying the Current Time ....................................................... 49 ■ Setting the Sleep Timer ....................................[...]

English - 6 Contr ol P anel ➢ The actual configuration of your TV may be different, depending on your model. ( a ) Place the TV in standby mode ( b ) Remote control sensor ( c ) Standby & Timer indicator ( d ) Switch among video input modes ( e ) Display the on-screen menu ( f ) Adjust the volume ( g ) Select channels ( h ) Access to the sele[...]

English - 7 Connection P anel ➢ The actual configuration of your TV may be different, depending on your model. ➢ For further details about the connections, refer to pages 71~76. ☛ Whenever you connect an audio or video system to your television, ensure that all elements are switched off. Refer to the documentation supplied with your equipment[...]

English - 8 Using a Displa y Dec k You can display a VCR or DVD Player, etc. by using the display deck. You must insert or replace the batteries in the remote control when you: ◆ Purchase the television ◆ Find that the remote control is no longer operating correctly 1 Remove the cover on the rear of the remote control by pressing the symbol ( )[...]

English - 9 Infrared Remote Contr ol DVD INFORMATION DISPLAY / ONE, TWO, OR THREE-DIGIT CHANNEL SELECTION MENU DISPLAY/ TELETEXT INDEX TELEVISION STANDBY INFORMATION DISPLAY/ TELETEXT REVEAL EXIT FROM ANY DISPLAY/ TUNER/CABLE NETWORK SELECTION DELETE A BOOKMARK NUMBER AND CANCEL THE PROGRAMME PLAY/ PICTURE EFFECT SELECTION SOUND MODE SELECTION DIRE[...]

English - 10 To view television channels correctly, a signal must be received by the set from one of the following sources: ◆ An outdoor aerial ◆ A cable television network ◆ A satellite network 1 In the first three cases, connect the aerial or network input cable to the ANT IN jack on the rear of the television. 2 If you are using an indoor [...]

English - 11 Connecting a S atellite Receiv er or Decoder In order to watch television programmes broadcast via a satellite network, you must connect a satellite receiver to the rear of TV. Also, in order to descramble a coded transmission signal, you must connect a decoder to the rear of TV. ◆ Using a SCART cable Connect the receiver (or decoder[...]

English - 12 S witc hing Y our T elevision On and Of f TV The mains lead is attached to the rear of your television. 1 Plug the mains lead into an appropriate socket. ➢ The main voltage is indicated on the rear of the television and the frequency is 50 or 60Hz. 2 Press the power switch on the side of the television to “ ON ” ( I ). Result : T[...]

English - 13 F amiliarizing Y our self with the Remote Control The remote control is used mainly to: ◆ Change channels and adjust the volume ◆ Set up the television using the on-screen menu system The following table presents the most frequently used buttons and their functions. Button Viewing Function Menu Function Used to display the next - s[...]

English - 14 When the television is initially powered on several basic customer settings proceed automatically and subsequently. The following settings are available. 1 If the television is in Standby mode, press the POWER () button on the remote control. Result : The message Start Plug & Play is displayed. 2 To start Plug & Play, press the[...]

English - 15 If you want to reset this feature... 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button until the Setup is selected. Result : The options available in the Setup group are displayed. 3 Press the ENTER () button. 4 Press the ▲ or ▼ button until the Plug & Play is selected. Press the ENT[...]

English - 16 When you start using your television for the first time, you must select the language which will be used for displaying menus and indications. 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button until the Setup is selected. Result : The options available in the Setup group are displayed. 3 Pre[...]

English - 17 Setup Move Enter Return Time √ √ Plug & Play √ √ Language : English √ √ Self Focus √ √ Blue Screen : Off √ √ Melody : On √ √ ▼ More TV Self Focus Move Enter Return Self Focus √ √ Auto : On √ √ Message Display : On √ √ TV The “Self Focus” feature automatically finds the optimum picture quali[...]

English - 18 Setup Move Enter Return Time √ √ Plug & Play √ √ Language : English √ √ Self Focus √ √ Blue Screen : Off √ √ Melody : On √ √ ▼ More TV Self Focus Move Enter Return Self Focus √ √ Auto : On √ √ Message Display : On √ √ TV Self Focus Move Enter Return Self Focus √ √ Auto : On √ √ Message [...]

English - 19 Setup Move Enter Return Time √ √ Plug & Play √ √ Language : English √ √ Self Focus √ √ Blue Screen : Off √ √ Melody : On √ √ ▼ More TV Self Focus Move Enter Return Self Focus √ √ Auto : On √ √ Message Display : On √ √ TV Self Focus Move Enter Return Self Focus √ √ Auto : On √ √ Message [...]

English - 20 You can scan for the frequency ranges available to you, (availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However you can sort numbers manually and clear any channels you do not wish to watch. 1 Press the MENU () button. Result : The main menu is[...]

English - 21 This operation allows you to change the programme numbers of stored channels. This operation may be necessary after using the auto store. You can delete those channels you do not want to keep. 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button until the Channel is selected. Result : The optio[...]

English - 22 Storing Channels Manually You can store the television channels, including those received via cable networks. When storing channels manually, you can choose: ◆ Whether or not to store each of the channels found ◆ The programme number of each stored channel which you wish to identify 1 Press the MENU () button. Result : The main men[...]

English - 23 9 If you know the number of the channel to be stored, see the following steps. ◆ Press the œ or √ button until the Channel is selected. ◆ Press the ▲ or ▼ button to select C (Air channel) or S (Cable channel). ◆ Press the √ button. ◆ Press the ▲ or ▼ button to select the required number. ➢ If no sound or abnormal[...]

English - 24 You can exclude channels of your choice from the channel scan operation. When you scan through the stored channels, those that you have chosen to skip are not displayed. All channels that you do not specifically choose to skip are displayed during scanning. 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the ?[...]

English - 25 Channel names will be assigned automatically when channel information is broadcast. These names can be changed, allowing you to assign new names. 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button until the Channel is selected. Result : The options available in the Channel group are displayed[...]

English - 26 This feature allows you to lock the television so that it cannot be switched on via the front panel. It can, however, still be switched on via the remote control. By keeping the remote control away from unauthorised users, such as children, you can prevent them from watching unsuitable programme. 1 Press the MENU () button. Result : Th[...]

English - 27 If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, you may have to fine tune the channel manually. 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button until the Channel is[...]

English - 28 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button until the Channel is selected. Result : The options available in the Channel group are displayed. 3 Press the ENTER () button. 4 Press the ▲ or ▼ button until the Scan is selected. Press the ENTER () button. Result : You can view every me[...]

English - 29 You can select the picture mode which best corresponds to your viewing requirements. 1 Press the MENU () b u t t on. Result : The main menu is displayed. 2 Press the ▲ or ▼ button until the Picture is selected. Result : The options available in the Picture group are displayed. 3 Press the ENTER () button. Result : The Mode is selec[...]

English - 30 Your television has several setting options that allow you to control the picture quality. 1 Press the MENU () b u t t on. Result : The main menu is displayed. 2 Press the ▲ or ▼ button until the Picture is selected. Result : The options available in the Picture group are displayed. 3 Press the ENTER () button. 4 Press the ▲ or ?[...]

English - 31 S electing the Picture Size (4:3 Models) Picture Mode : Dynamic √ √ Custom √ √ Colour Tone : Normal √ √ Size √ √ Scan Mode : Auto √ √ Digital NR : Off √ √ ▼ More TV Move Enter Return Size Normal Zoom1 Zoom2 Cinema TV Move Enter Return You can select the picture size which best corresponds to your viewing requi[...]

English - 32 S electing the Picture Size (Wide Models) Picture Mode : Dynamic √ √ Custom √ √ Colour Tone : Normal √ √ Size √ √ Scan Mode : Auto √ √ Digital NR : Off √ √ ▼ More TV Move Enter Return Size Auto Wide 16:9 Panorama Zoom1 Zoom2 4:3 Cinema1 Cinema2 TV Move Enter Return You can select the picture size which best co[...]

English - 33 S electing the Picture Size (Wide Models) (continued) 4:3 Signal Auto Wide 16:9 Panorama Zoom1 Zoom2 4:3 Cinema1 Cinema2 16:9 Signal Auto Wide 16:9 Panorama Zoom1 Zoom2 4:3 Cinema1 Cinema2 Auto Wide 16:9 Panorama Zoom1 Zoom2 4:3 Cinema1 Cinema2 Auto Wide 16:9 Panorama Zoom1 Zoom2 4:3 Cinema1 Cinema2 BP68-00341A (J61A_Euro_ENG) 2004/07/[...]

English - 34 You will normally find that scan mode is best set to Natural to reduce any slight picture flicker. However, it is possible that some occasional broadcasts (NTSC-M) may benefit by changing the scan mode. 1 Press the MENU () b u t t on. Result : The main menu is displayed. 2 Press the ▲ or ▼ button until the Picture is selected. Resu[...]

English - 35 If the signal received by your television is weak, you can activate this feature to help reduce any static and ghosting that may appear on the screen. 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button until the Picture is selected. Result : The options available in the Picture group are disp[...]

English - 36 This feature brings you more detailed images with 3D noise reduction, detail enrichment, contrast and white enhancement. A new image compensation algorithm gives brighter, clearer, more detailed images. DNIe TM technology will always deliver the best quality pictures from any signal. 1 Press the MENU () button. Result : The main menu i[...]

English - 37 If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set Blue Screen mode to Off . 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button until the Setup is selected[...]

English - 38 1 1 1 Eas Bu PI SW P You can display a sub-picture within the main picture of a TV programme or external A/V devices. In this way you can watch a TV programme or monitor the video input from any connected devices while watching TV or other video input. 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the ▲ or [...]

English - 39 11 Press the ▲ or ▼ button until the Position is selected. Press the ENTER () button. Result : The available positions are displayed. --- ➢ The Position menu is available when the Size is Large or Small. 12 Select a position for the sub-picture by pressing the ▲ or ▼ button. Press the ENTER () button. 13 Press the ▲ or ▼ [...]

English - 40 You can select the type of special sound effect to be used when watching a given broadcast. 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button until the Sound is selected. Result : The options available in the Sound group are displayed. 3 Press the ENTER () button. Result : The Mode is select[...]

English - 41 Your television has several settings which allow you to control the sound quality. 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button until the Sound is selected. Result : The options available in the Sound group are displayed. 3 Press the ENTER () button. 4 Press the ▲ or ▼ button until [...]

English - 42 Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume every time the channel is changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is [...]

English - 43 Dolby Digital mode allows you enjoy Dolby Digital sound effect fully with the speakers connected to the television. This allows various modes for the main, center, surround and woofer speakers to be selected. 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button until the Sound is selected. Resu[...]

English - 44 8 Press the ▲ or ▼ button until the Level Control is selected. Press the ENTER () button. Result : The Level Control menu is displayed with the Test Tone selected. 9 Press the ENTER () button again. To simulate the volume of the speakers, select On by pressing the ▲ or ▼ button. Press the ENTER () button. 10 Select the speaker [...]

English - 45 Se t ting up Dolb y Pr o LogicII ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ Mono Mono Lo/Ro Lt/Rt 5.1ch Dolby Digital PCM Stereo (L/R) DTS MPEG I (Stereo only) MPEG II Main Left ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ Center ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ Main Right ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ Right Le[...]

English - 46 This feature allows you enjoy Digital sound when equipment with Digital output is connected to the television. 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button until the Sound is selected. Result : The options available in the Sound group are displayed. 3 Press the ENTER () button. 4 Press [...]

English - 47 You can hear melody sound when the television is powered on or off. 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button until the Setup is selected. Result : The options available in the Setup group are displayed. 3 Press the ENTER () button. 4 Press the ▲ or ▼ button until the Melody is s[...]

English - 48 S electing the Sound Mode The “DUAL I-II” button displays/controls the processing and output of the audio signal. When power is switched on, the mode is automatically preset to either “Dual I ” or “Stereo”, depending on the current transmission. ➢ ◆ If the receiving conditions deteriorate, listening will be easier if th[...]

English - 49 You can set the television clock so that the current time is displayed when pressing the “INFO ( ) ” button. You must also set the time if you wish to use the automatic on or off timers. ➢ When pressing the “ I ” button (On/Off) on the panel of the television, the clock setting will be reset. 1 Press the MENU () button. Resul[...]

English - 50 You can select a time period of between 30 and 180 minutes after which the television automatically switches to Standby mode. 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button until the Setup is selected. Result : The options available in the Setup group are displayed. 3 Press the ENTER () b[...]

English - 51 r You can set the On or Off timers so that the television will: ◆ Switch on automatically and tune to the channel of your choice at the time you select ◆ Switch off automatically at the time you select ➢ The first step is to set the television clock (refer to “Setting the Current Time” on page 49). If you have not yet set the[...]

English - 52 Vi e wing an External Signal S ource Use the remote control to switch between viewing signals from connected equipment, such as VCR, DVD, Set-Top Box, and the TV source (broadcast or cable). 1 Press the MENU () button. Result : The options available in the Input group are displayed. 2 Press the ENTER () button. Result : The Source List[...]

English - 53 Playback 1 Press the TV/DVD button to switch to DVD mode. 2 Press the OPEN/CLOSE () button. 3 Place a disc gently into the tray with the disc’s label facing up. 4 Press the (Play/Pause) or OPEN/CLOSE () button to close the disc tray. ☛ Disks with defect or copied illegally may not be played back by DVD player and may cause damage t[...]

English - 54 Using the S earc h and Skip Functions Searching through a Chapter or Track Press the (Forward search) or (Rewind search) button during playback. - Press the (Forward search) or (Rewind search) button and press it again to search at a faster speed (2X/4X/8X/16X/32X) on the DVD, VCD or CD. - To return to normal speed playback, press the [...]

English - 55 1 Press the OPEN/CLOSE () button. Place a disc gently into the tray with the disc’s label facing up. Press the (Play/Pause) or OPEN/CLOSE () button to close the disc tray. 2 Press the … or † button to select a music folder, then press the ENTER () or √ button. 3 Press the … or † button again to select a song file. Press the[...]

English - 56 1 Press the OPEN/CLOSE () button. Place a disc gently into the tray with the disc’s label facing up. Press the (Play/Pause) or OPEN/CLOSE () button to close the disc tray. 2 Press the … or † button to select the desired MPEG folder, then press the ENTER () or √ button. 3 Press the … or † button again to select an MPEG file.[...]

English - 57 Press the OPEN/CLOSE () button. Place a disc gently into the tray with the disc’s label facing up. Press the (Play/Pause) or OPEN/CLOSE () button to close the disc tray. Rotating and Reversing the picture 1 Press the … or † button to select a picture file from the file list, then press the ENTER () button. Result : The selected p[...]

English - 58 1 Press the DVD MENU button. Result : The DVD menu is displayed with the Disc Menu selected. 2 Press the ENTER () button. ➢ Depending on the disc, the Disc Menu may not work. Using the Disc Menu Press ENTER key for DiscMenu 1 Press the DVD MENU button. Result : The DVD menu is displayed. 2 Press the … or † button to select Title [...]

English - 59 Displa ying the Disc Inf ormation Info Zoom Bookmark Repeat Program 1 Press the DVD MENU button. Result : The DVD menu is displayed. 2 Press the … or † button to select Function . Result : The options available in the Function group are displayed. 3 Press the ENTER () button. Result : The Info menu is selected. 4 Press the ENTER ()[...]

English - 60 Using the Zoom F unction (D VD/V CD) 1 Press the DVD MENU button. Result : The DVD menu is displayed. 2 Press the … or † button to select Function . Result : The options available in the Function group are displayed. 3 Press the ENTER () button. 4 Press the … or † button to select Zoom . Press the ENTER () button. Result: The ?[...]

English - 61 Using the Bookmark F unction (D VD/V CD) This feature lets you bookmark sections of a DVD or VCD so you can quickly find them at a later time. 1 Press the DVD MENU button. Result : The DVD menu is displayed. 2 Press the … or † button to select Function . Result : The options available in the Function group are displayed. 3 Press th[...]

English - 62 Repeat the current track, chapter, title, a chosen section (A-B), or all of the disc. 1 Press the DVD MENU button. Result : The DVD menu is displayed. 2 Press the … or † button to select Function . Result : The options available in the Function group are displayed. 3 Press the ENTER () button. 4 Press the … or † button to selec[...]

English - 63 1 Press the DVD MENU button. Result : The DVD menu is displayed. 2 Press the … or † button to select Function . Result : The options available in the Function group are displayed. 3 Press the ENTER () button. 4 Press the … or † button to select Program . Press the ENTER () button. 5 Press the numeric buttons to select the first[...]

English - 64 If you select the language for the player’s on-screen displays, it will come up automatically every time. 1 Press the DVD MENU button. Result : The DVD menu is displayed. 2 Press the … or † button to select Setup . Result : The options available in the Setup group are displayed. 3 Press the ENTER () button. Result : The Language [...]

English - 65 1 Press the DVD MENU button. Result : The DVD menu is displayed. 2 Press the … or † button to select Setup . Result : The options available in the Setup group are displayed. 3 Press the ENTER () button. 4 Press the … or † button to select Display Setup . Press the ENTER () button. Result : The options available in the Display S[...]

English - 66 1 Press the DVD MENU button. Result : The DVD menu is displayed. 2 Press the … or † button to select Setup . Result : The options available in the Setup group are displayed. 3 Press the ENTER () button. 4 Press the … or † button to select Parental Setup . Press the ENTER () button. Result : The Enter Password is displayed. 5 En[...]

English - 67 Most television channels provide written information services via teletext. Information provided includes: ◆ Television programme times ◆ News bulletins and weather forecasts ◆ Sports results ◆ Travel information This information is divided into numbered pages (see diagram). Part Contents A Selected page number. B Broadcasting [...]

English - 68 You can display Teletext information at any time on your television. ☛ For Teletext information to be displayed correctly, channel reception must be stable; otherwise: ◆ Information may be missing ◆ Some pages may not be displayed 1 Select the channel providing the Teletext service using the P or button. 2 Press the TTX/MIX () bu[...]

English - 69 S electing Display Options When you have displayed a Teletext page, you can select various options to suit your requirements. To display... Press the... ◆ Hidden text (reveal) (answers to quiz games, for example) ◆ The normal screen (reveal) again ◆ A secondary page (sub-page) ◆ The broadcast when searching for a page (cancel) [...]

English - 70 S electing a T eletext P age You can enter the page number directly by pressing the numeric buttons on the remote control. 1 Enter the three-digit page number given in the content by pressing the corresponding numeric buttons. Result : The current page counter is increased by one and the page is then displayed. If the selected page is [...]

English - 71 Connecting to External Input/Output ➢ EXT 1 is used for equipment with an RGB output, such as video game devices or video disc players. Rear of the TV VCR Decoder / Video game device Video disc player Satellite receiver ① This end can be fitted with: ◆ A SCART connector ◆ An S-Video connector and two audio RCA connectors (L+R);[...]

English - 72 Connecting to the RC A Input ➢ The RCA ( VIDEO + AUDIO-L and R ) connectors are used for equipment, such as camcorders, video disc players, and some video game devices. Side of the TV Camcorder Video game device Video disc player BP68-00341A (J61A_Euro_ENG) 2004/07/29 11:18 AM Page 72[...]

English - 73 Connecting to the S-V ideo Input ➢ The S-VIDEO INPUT and AUDIO-L / R connectors are used for equipment with an S-Video output, such as a camcorder or VCR. Camcorder VCR ① To play pictures and sound, both the S-VIDEO INPUT and AUDIO-L / R connectors must be used. and ① Side of the TV BP68-00341A (J61A_Euro_ENG) 2004/07/29 11:18 AM[...]

English - 74 Connecting to the Digital A udio Input ➢ The DIGITAL AUDIO IN ( OPTICAL IN or COAXIAL IN ) connectors are used for equipment with digital output (to take digital sound). Rear of the TV DVD or BP68-00341A (J61A_Euro_ENG) 2004/07/29 11:18 AM Page 74[...]

English - 75 Connecting to the Component Input ➢ The COMPONENT IN connectors are used for equipment with a DVD or DTV receiver output. (480i, 480p, 576i, 576p, 1080i) DVD Rear of the TV DTV receiver BP68-00341A (J61A_Euro_ENG) 2004/07/29 11:18 AM Page 75[...]

English - 76 Connecting A dditional Speak er s ① ① The SURROUND SPEAKER OUT connectors are used for the sound output to external speakers. - The factory default of SURROUND SPEAKER OUT SELECTION is set to INT . For sound output to external speakers, set to EXT . Sound to the internal speaker is off. ➢ To improve the sound quality, connect the[...]

English - 77 Redirecting an Input to the External Output Your television enables you to choose which audio/video signals are output to the external connector. 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button until the Setup is selected. Result : The options available in the Setup group are displayed. 3 [...]

English - 78 Pr ogramming the Remote Contr ol f or Other Components Your TV comes equipped with a universal remote control. In addition to controlling the TV, the universal remote control can also operate a VCR, Cable box, DVD, and Set-Top Box made by Samsung (even if your VCR, Cable box and DVD are made by manufacturers other than Samsung). ➢ Th[...]

English - 79 Pr ogramming the Remote Contr ol f or Other Components Admiral Aiwa Akai Audio Dynamics Bell&Howell Broksonic Candle Canon Citizen Colortyme Craig Curtis Mathes Daewoo DBX Dimensia Dynatech Emerson Fisher Funai General Electric Go Video LG (Goldstar) Harman Kardon Hitachi Instant Replay JC Penny JVC Kenwood KLH Lioyd Logik LXI Magn[...]

English - 80 Pr ogramming the Remote Contr ol f or Other Components Sylvania Symphonic Tandy Tashika Tatung Teac Technics Teknika TMK Toshiba 021, 025, 036, 056, 059 025 018, 025 006 037 025, 037, 068 021 006, 021, 025, 031 066 003, 019, 029, 051, 052 Totevision Unitech Vector Research Victor Video Concepts Videosonic Wards Yamaha Zenith 002, 006 0[...]

English - 81 Disc T ype and Characteristics The DVD player is capable of playing the following types of discs with the corresponding logos: 5” Single-sided: 240 min. Double-sided: 480 min. Single-sided: 80 min. Double-sided: 160 min. Audio + Video Audio + Video Audio - CD is recorded as a Digital Signal with better audio quality, less distortion [...]

English - 82 Tr oubleshooting: Before Contacting S ervice Personnel Before contacting the Samsung after-sales service, perform the following simple checks. If you cannot solve the problem using the instructions below, note the model and serial number of the television and contact your local dealer. No sound or picture Normal picture but no sound No[...]

English - 83 Tr oubleshooting: Before Contacting S ervice Personnel (continued) Disc does not play. 5.1 channel sound is not being reproduced. The “ ” icon appears on screen. Disc Menu doesn’t appear. Playback mode differs from the Setup Menu selection. If you experience other problems. ◆ Ensure that the disc is inserted with the label side[...]

ELECTRONICS BP68-00341A-00 - AFTER SALES SERVICE - Do not hesitate to contact your retailer or service agent if a change in the performance of your product indicates that a faulty condition may be present. BP68-00341A (J61A_Euro_ENG) 2004/07/29 11:18 AM Page 84[...]