Samsung TS220C manual

User Manual SyncMaster TS190C TS220C TS240C The color and the appearance may differ depending on the product, and the speci fications are subject to change without prior notice to improve the performance. BN46-00169B- 0 5[...]

2 Before Using the Product Before Using the Product Copyright The content s of this manua l are subject t o change with out notice to improve qua lity. © 2011 Samsung Elec tronics Samsung Electro nics owns th e copyright fo r this man ual. Use or reproduction of this manual in part s or entirety withou t the authorizati on of Samsung Electr onics [...]

3 Before Using the Product Before Using the Product Icons used in this manual Symbols for safety precautions The follow ing images a re for refer ence only. Real-lif e situations may differ from what is shown in the images. Warning A serious or fa tal injury may result if instruct ions are no t followed. Caution Personal injury or damage to propert[...]

4 Before Using the Product Before Using the Product Cleaning Cleaning Exercise care when cleaning as th e panel and exte rior of advanced L CDs are easily scr atched. Take the following steps when cle aning. 1. Power off the monitor and computer. 2. Disconnect the power cable from the monitor. Hold the power cable by the plug and do not touch the c[...]

5 Before Using the Product Before Using the Product Securing the Installation Space  Ensure some space around the product for ventilation. An internal te mperature rise may cause fire and damage the product. Be sure to allow the amount of space as s hown below or greater w hen installing the prod uct. The exterior may differ depending on the pro[...]

6 Before Using the Product Before Using the Product Safety Precautions Electricity and Safety The following images are for reference only. Real-life situations may differ from what is shown in the images. Warning Do not use a damaged power cable or plug , or a loose power soc ket.  An electric shock or fire may result. Do not plug many prod ucts[...]

7 Before Using the Product Before Using the Product Caution Installation and Safety Warning Do not unplug the power cable when the product is in us e.  The product may become damaged by an ele ctric shock. Do not use th e power cable for products o ther than au thorized prod ucts supplied by Samsung.  An electric shock or fire may result. Kee[...]

8 Before Using the Product Before Using the Product Caution Do not install t he product on an unstab le or vibrating surface (insec ure shelf, sloped surface, etc.).  The product m ay fall and break o r cause a pers onal injury.  Using the product in an area w ith excess vibration m ay damage the product or cause a fire. Do not install th e p[...]

9 Before Using the Product Before Using the Product Operation and Safety Warning Put down the p roduct carefully.  The product m ay fall and break o r cause a pers onal injury. Installing the product in an unusual place (a place exposed to a lot of fine particles, chemical sub stances or extreme tempe ratures, or an airport or train station whe [...]

10 Before Using the Product Before Using the Product During a light ning or thundersto rm, power o ff the product and remove the po wer cable.  An electric shock or fire may result. Do not drop objects on the produ ct or apply impact.  An electric shock or fire may result. Do not move the pr oduct by pulling the power cable or any cable.  [...]

11 Before Using the Product Before Using the Product Caution Do not insert a metallic object (a chopstick, coin , hair pin, etc.) or inflammable object (p aper, match, e tc.) into the v ent or ports of the prod uct.  If water or an y foreign substan ce enters the product, be sure to power off the product, re move the power cab le, and contact Sa[...]

12 Before Using the Product Before Using the Product Do not let wate r enter the D C power ada pter or get th e adapter wet.  An electric shock or fire may result.  Avoid using the product ou tdoors wher e it can be ex posed to rain or snow.  Be careful not t o get the DC p ower adapter wet when you w ash the floor. Do not put th e DC powe[...]

13 Before Using the Product Before Using the Product Correct posture to use the product Do not place heavy objects on the prod uct.  Product failure o r person al injure may result. Do not increase th e volume too hig h when using hea dphones (earpho nes).  Sound particular ly at a higher volume could potentially affe ct long-term hearing. Us[...]

Table Of Cont ents 14 Table Of Contents BEFORE USING THE PRODUCT 2 Copyright 3 Icons used in this manual 3 Symbols for safety precautions 4 Cleaning 4 Cleaning 5 Securing the Installation Space 5 Precautions for storage 6 Safety Precautions 6 Electricity and Safety 7 Installation and Safety 9 Operation and Safety 13 Correct posture to use the produ[...]

Table Of Contents Table Of Cont ents 15 30 Connection to Use the "Zero Client" 30 Connection Using the D-SUB Cable (Analogue Type) 30 Connection Using the DVI Cable 31 Connecting to Headphones or Speakers 31 Connecting a Microphone 32 Connecting to a Server (LAN/USB Connection) 33 Using the "Zero Client" 33 Login 33 Message Box [...]

Table Of Contents Table Of Cont ents 16 72 Fine 72 Adjusting Fine CONFIGURING TINT 73 SAMSUNG MAGIC Color 73 Configuring SAMSUNG MAGIC Color 74 Red 74 Configuring Red 75 Green 75 Configuring Green 76 Blue 76 Configuring Blue 77 Color Tone 77 Configuring the Color Tone Settings 78 Gamma 78 Configuring Gamma RESIZING OR RELOCATING THE SCREEN 79 H-Pos[...]

Table Of Contents Table Of Cont ents 17 85 Off Timer On/Off 85 Configuring Off Timer On/Off 86 Off Timer Setting 86 Configuring Off Timer Setting 87 PC/AV Mode 87 Configuring PC/AV Mode 88 Key Repeat Time 88 Configuring Key Repeat Time 89 Customized Key 89 Configuring Customized Key 90 Auto Source 90 Configuring Auto Source 91 Display Time 91 Confi[...]

Table Of Contents Table Of Cont ents 18 TROUBLESHOOTING GUIDE 97 Requirements Before Contacting Samsung Customer Service Center 97 Testing the Product 97 Checking the Resolution and Frequency 97 Check the following. 100 Q & A SPECIFICATIONS 102 General 104 PowerSaver 105 Standard Signal Mode Table APPENDIX 109 Contact SAMSUNG WORLDWIDE 114 Corr[...]

19 1 Preparations 1 Preparations 1.1 Checking the Contents 1.1.1 Removing the Packaging 1 Open the packaging b ox. Be careful not to dam age the product whe n you open the packa ging with a sharp instrume nt. 2 Remove the sty rofoam from the product. 3 Check the compo nents and remove th e styrofoam and pl astic bag.  The appearance of actual co[...]

20 Preparations 1 1 Preparations 1.1.2 Checking the Components  Contact the dealer from whom you purch ased the product if any item is missing.  The appearance of the components and items sold separately may differ from the image shown. Components  Components may vary depending on the country.  The stand base supplied with this product [...]

21 Preparations 1 1 Preparations 1.2 Parts 1.2.1 Frontal Buttons The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Icons Description  Open or close the onscreen display (OSD) menu, or return to the parent menu .  OSD control loc k: Maintain the current sett ings[...]

22 Preparations 1 1 Preparations Icons Description Configure Customized Key and press [ ]. The following options will be enabled. Angle - Bright - Eco Saving - Image Size To configure Customized Key , go to SETUP&RESE T Customized Key and select the mode you want. Move to the upper or lower men u or adjust the valu e for an option on th e OSD m[...]

23 Preparations 1 1 Preparations 1.2.2 Reverse Side The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Port Ports Connect to a USB device. Connect to a network us ing the L AN cable. Connect to a n audio output device such as he adphones. Connect to the m onitor using [...]

24 Preparations 1 1 Preparations 1.2.3 Right Side View The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Port Ports Connect to a PC or the st and base using the DVI cable . Connect to a PC or the stand b ase using the D-SUB cable. Connect to [DC 14 V OUT] on the stand[...]

25 Preparations 1 1 Preparations 1.3 Installation 1.3.1 Attaching the Stand The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Place a protective clo th or cushion on a f lat surface. Next, place th e product with the face down on top o f the cloth or cushion. Insert t[...]

26 Preparations 1 1 Preparations 1.3.2 Adjusting the Prod uct Tilt and Height The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.  To adjust the height, remove the fixing pin.  The monitor tilt and height can be adjusted.  Hold the top center of the product and[...]

27 Preparations 1 1 Preparations 1.3.4 Installing a Wall-moun t Kit or Desktop Stand Before Installation Power the product off and remove the power cable from the power socket. Align the grooves and tightly fasten the sc rews on the bracket on the produc t with the corre sponding parts on the wall-mount kit or desktop stan d you want t o attach. Pl[...]

28 Preparations 1 1 Preparations Notes  Using a screw longer than the standard length can damage the internal components of the product.  The length of screws required for a wall mount that does not comply with the VESA standards may vary depending on the specifications.  Do not use screws that do not comply with the VESA standards. Do not[...]

29 2 Using "Zero Client" 2 Using "Zero Client" 2.1 About "Zero Client" The "Zero Client" uses a Linux oper ating system. When the Client connec ts to a server where the Citrix XendDesktop/XenA pp service is availabl e, information relating to the keyb oard, mouse, au dio/video and display data is tr ansmitted[...]

30 Using "Zero Client" 2 2 Using "Zero Client" 2.2 Connection to Use the "Zero Client" 2.2.1 Connection Using the D-SUB Cable (A nalogue Type) 1 Connect the D -SUB cable to [RGB IN] on the ba ck of the mo nitor and [RGB OUT ] on the stan d base. 2 Connect the D C power ad apter to the product and a power ou tlet. Next,[...]

31 Using "Zero Client" 2 2 Using "Zero Client" 2.2.3 Connecting to H eadphones or Speakers 1 Connect an audio o utput device (head phones, speaker s, etc.) to the [AUDIO OUT] port on the b ack or the [ ] port on t he side of the stand base. 2.2.4 Connecting a Microphone 1 Connect the mic rophone to [MIC] on the right side of the[...]

32 Using "Zero Client" 2 2 Using "Zero Client" 2.2.5 Connecting to a Se rver (LAN/USB Connection) 1 Connect the [ LAN] port on t he back of th e stand base to the server u sing the LAN c able. It is not supported when the network speed is below or equal to 10Mbps. 2 Connect USB dev ices (keyboard , mouse, etc. ) to [ ] on the ba[...]

33 Using "Zero Client" 2 2 Using "Zero Client" 2.3 Using the "Zero Client" 2.3.1 Login  Username : Enter the user name that will be us ed to connect to t he "Citrix" server.  Password : Enter the password that will be used to connect to the "Citrix" server.  Domain : Enter the domain that w[...]

34 Using "Zero Client" 2 2 Using "Zero Client" Identity The Identi ty function of MagicRMS allows you to check the host name of the Client. Disconnect Message If the Client is disconn ected from the network, a messag e will appear indic ating the disconnectio n. In this case, if you are logged on, t he desktops/applications conn[...]

35 Using "Zero Client" 2 2 Using "Zero Client" Local Netwo rk You can config ure the IP to connect the Client to a ne twork.  Link Speed & Duplex : Select a network co nnection type and speed.  To use a static IP, deselect Enable DHCP and specify the IP.  To use DHCP, sele ct Enable DHCP . Name Servers Configure the[...]

36 Using "Zero Client" 2 2 Using "Zero Client" To automatically conf igure several settings for the Client all at once using DHCP upon boot up, configur e the DHCP Option s IDs .  Ensure the sett ing is specifi ed between 128 an d 254.  If this option is configured, the settin g specified will replace the cust omized setti[...]

37 Using "Zero Client" 2 2 Using "Zero Client" 2 EAP-TLS To use EAP-TLS mode, set the Authentication mode to EAP-TLS . Click Properti es , and configu re the following settings for aut hentication. To select a certific ate, ensure you co py the authe ntication file to the Client using Certification Management . a. Enter the Iden[...]

38 Using "Zero Client" 2 2 Using "Zero Client"  Enter the IP addr ess of the Citrix server.  Specify the Default Username and Default Domain that will be used to c onnect to th e server. Remote Management You can configure the settings for server s that manage the Client, enter info rmation about the servers, or view the s[...]

39 Using "Zero Client" 2 2 Using "Zero Client"  Multicast Enable this option if you want to autom atically connect to the MagicRMS server. Specify th e IP Address and Port number f or Multicast . If the MagicRMS server is as signed with the same IP address and port number as the Client, it will automatica lly connect to the C[...]

40 Using "Zero Client" 2 2 Using "Zero Client" 4 MagicRMS Status You can chec k the connec tion status of th e MagicRMS server. If there are co nnection issues, c heck the server conn ection and sele ct Start , Stop , or Restart to start the server . To view details of the MagicRMS server logs, click View Log .[...]

41 Using "Zero Client" 2 2 Using "Zero Client" 5 Network Tools Network Tools can be used to check the c onnection stat us between th e Client and ne twork.  Ping Using the Ping command , you can che ck the status o f the networ k connection for the IPs entered.  Trace Route Using the Ro ute comma nd, you can c heck the net[...]

42 Using "Zero Client" 2 2 Using "Zero Client" Terminal Properties Configure the pro perties of the Client. System 1 General  Terminal Name : Change the Client nam e. The default na me is “TS_ + MAC in formation."  Reset the sys tem setting to fact ory default : Reset the Client settings b y selecting the checkbox. [...]

43 Using "Zero Client" 2 2 Using "Zero Client"  Control the power supply to the Client by changin g the Screen Off setting. Th e Client w ill activate Power Management if it is left idle for a specified amou nt of time. The following time settin gs are availa ble to choos e from.  Never  5 minutes  10 minutes  30 [...]

44 Using "Zero Client" 2 2 Using "Zero Client"  Time Zone Enter the Time Zone information to apply to the Client. Click Change , and select the time zo ne desired. To enable D ayLight Saving, select the Enable DayLight Saving chec kbox and select the number of ho urs to apply.  Time/D ate Format  Time Format / Date Form[...]

45 Using "Zero Client" 2 2 Using "Zero Client" 1 Orientation Configure the scr een orientatio n of the selected display device. You can select H orizontal or Vert ical . 2 Resolution Set the resolution of the selected display device. The resolution s available vary de pending on the display device. 3 Multiple Display When two di[...]

46 Using "Zero Client" 2 2 Using "Zero Client"  To display an extended desktop on the two displays, select Extend . The display sele cted as the p rimary screen will be placed on the left. To set the selected display as the primary scr een, select the Set as the main screen checkbox.[...]

47 Using "Zero Client" 2 2 Using "Zero Client" When only one display device is connected, the Multiple Display option is disabled. Toolbar Select whether to d isplay the toolbar or e nable the shortcut keys on the Client.  Always hide toolbar Hide the toolbar on the screen: se lect the check box and minimize t he toolbar. To [...]

48 Using "Zero Client" 2 2 Using "Zero Client" Input 1 Keyboard You can configure the keyboard settings for th e Client.  Character Se t : Specify the charac ter encoding m ethod to use o n the Client.  Keyboard Language : Specify the keyboard la nguage.  Repeat Rat e : Specify the keyb oard sensitivit y. 2 Mouse You ca[...]

49 Using "Zero Client" 2 2 Using "Zero Client" 2 SMBs Configure the SMB-type printer se ttings. Information You can view th e Client information . General  Firmwar e : View the ver sion of the firmwa re on the Client.  Checksum : View the checksum of the firmwa re on the Client.  Citrix Receiver : View the version of th[...]

50 Using "Zero Client" 2 2 Using "Zero Client"  Terminal N ame : View the Terminal Name of the Client. Hardware  CPU : View informa tion abou t the CPU on the Client.  CPU Busy : View the cu rrent CPU usage o n the Client.  Memory size : View the total a mount of memory on the Clie nt.  Free Memory : Vie w the amo[...]

51 Using "Zero Client" 2 2 Using "Zero Client"  Mac Address : View the Mac Address of the network adapter on the Client. Open Source Notice You can view de tails of th e Open Source components used on t he Client. Shutdown You can log o ff, close, or r estart the Clie nt. Open source license noti ce In the case of usin g open[...]

52 Using "Zero Client" 2 2 Using "Zero Client" 1 Log-off from account “** *” Log off from the Client if you are logged on. This optio n is enabled on ly when you are logged on to the Client. To log off, select Yes in the Notice window. 2 Shutdown the sy stem You can close the Client. To close the Clie nt, select Yes in th e [...]

53 Using "Zero Client" 2 2 Using "Zero Client" Remote Desktop You can view a list of desktops and applications (o n the Citrix Serve r) the Client ca n connect to w hen logged on.[...]

54 Using "Zero Client" 2 2 Using "Zero Client" Desktop List 1 Connect You can conne ct to a desktop or application o n the list by click ing the corre sponding Connect button or double-clicking the de sktop or application desired. When a connec tion to a de sktop or applic ation is est ablished, the Conne ct button fo r the desk[...]

55 Using "Zero Client" 2 2 Using "Zero Client" 4 Reconnect You can disp lay desktops and applicatio ns that are no t displayed eve n though the y are connec ted to the Client. Doub le-click the deskto p or application desired. The cor responding desk top or application row in the list will be highlighted. e.g.) Double-c lick Mem[...]

56 Using "Zero Client" 2 2 Using "Zero Client" Terminal Lock This menu lo cks the Network an d Terminal Properties options so that their settings cannot be changed. The correspond ing shortcut key is [ CTRL + ALT + F6 ].  How to lock th e two option s Press and hold the shortcut key for a specified tim e (about 8 seconds). Wh[...]

57 3 Connecting and Us ing a Source Device 3 Connecting and Using a Source Device 3.1 Before Connecting 3.1.1 Pre-connection Checkpoints  Before connectin g a source devic e, read the user manual pro vided with it. The number and locations of ports on sou rce devices m ay differ from device to dev ice.  Do not connect t he power cable un til [...]

58 Connecting and Using a Source Device 3 3 Connecting and Us ing a Source Device 3.2 Connecting and Using a PC 3.2.1 Connecting to a PC  Select a connection m ethod suitab le for your PC. Connecting parts may differ in different products. Connection Using the D-SUB Cable (Analogue Type) 1 Connect the D-SUB ca ble to the [RGB IN] port on the bac[...]

59 Connecting and Using a Source Device 3 3 Connecting and Us ing a Source Device Connection Using an HDMI-DVI Cable 1 Connect the DVI cab le to the [DVI IN] port o n the back of th e product and th e HDMI port on the PC. 2 Connect the DC po wer adapter to the product a nd a power socket. Next, turn on the p ower switch on the PC. (For details, ref[...]

60 Connecting and Using a Source Device 3 3 Connecting and Us ing a Source Device 3.2.2 Driver Installation  You can set the optimum resolution and frequency for this product by installing the corresponding drivers.  An installation driver is contained on the CD supplied with the product.  If the file provided is faulty, visit the Samsung [...]

61 Connecting and Using a Source Device 3 3 Connecting and Us ing a Source Device 3.2.3 Setting Optimum Resolution An information message abou t setting optimum resolution will appear if you power on the product for the first time after purchase. Select a langua ge and chan ge the resolu tion to the op timum value. 1 Press [ ] to move to t he langu[...]

62 Connecting and Using a Source Device 3 3 Connecting and Us ing a Source Device 3.2.4 Changing the Re solution Using a PC  Adjust the resolution and refresh rate in Control Panel on you r PC to obtain optimum picture quality.  The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected. Changing the Re solution on [...]

63 Connecting and Using a Source Device 3 3 Connecting and Us ing a Source Device Changing the Resolution on Windows Vista Go to Control Panel Personalization Display Settings and ch ange the resolution.[...]

64 Connecting and Using a Source Device 3 3 Connecting and Us ing a Source Device Changing the Re solution on Window s 7 Go to Control Panel Display Scree n Resolution and change the resolu tion.[...]

65 Connecting and Using a Source Device 3 3 Connecting and Us ing a Source Device 3.3 Connecting the Power The DC power adapter cannot be attached to the back of the monitor. Connect the power cable to the DC power adapter. Next , connect th e DC power adapter to [DC 14V IN] on the stand ba se. Connect the p ower extension cab le to [DC 14V] on the[...]

66 4 Screen Setup 4 Screen Setup Configure the screen settings such as brightness and color tone. 4.1 Brightness You can adjust th e general brightne ss of the picture. (Range: 0~100) A higher value wil l make the pictur e appear brighte r.  This menu is not available when Bright is set to Dynamic Contrast mode.  This menu is not available wh[...]

67 Screen Setup 4 4 Screen Setup 4.2 Contrast Adjust the cont rast between th e objects and b ackground. (Ran ge: 0~100) A higher va lue will i ncrease the contrast to make the o bject appear clearer.  This menu is not available when Bright is in Cinema or Dynamic Contrast mode.  This menu is not available when Color is in Full or Intelligent[...]

68 Screen Setup 4 4 Screen Setup 4.3 Sharpness Make the ou tline of objects more clear o r blurry. (Rang e: 0~100) A higher va lue will mak e the outli ne of object s clearer.  This menu is not available when Bright is in Cinema or Dynamic Contrast mode.  This menu is not available when Color is in Full or Intelligent mode. 4.3.1 Configuring [...]

69 Screen Setup 4 4 Screen Setup 4.4 SAMSUNG MAGIC Bright This menu provides an optimum picture quality s uitable for the environme nt where the produc t will be used.  This menu is not available when Eco Saving is set to On .  This menu is not available when Angle is enabled. This feature prov ides the viewing ang le, brightness, and t int t[...]

70 Screen Setup 4 4 Screen Setup 4.5 SAMSUNG MAGIC Angle Angle allows you to configure the settings to o btain the optimum picture quality according to you r viewing angle.  This menu is not available when Bright is in Cinema or Dynamic Contrast mode.  This menu is not available when Color is enabled. This feature prov ides the viewing ang le[...]

71 Screen Setup 4 4 Screen Setup 4.6 Coarse Adjust the scre en frequency. This menu is available in Analog mode only. 4.6.1 Adjusting Coarse 1 Press [ ] on the product. 2 Press [ ] to move to PICTURE and press [ ] on the prod uct. 3 Press [ ] to move to Coarse and press [ ] on the p roduct. The fo llowing scree n will appear . 4 Adjust the Coarse u[...]

72 Screen Setup 4 4 Screen Setup 4.7 Fine Fine-adjust the sc reen to obtain a vivid pictur e. This menu is available in Analog mode only. 4.7.1 Adjusting Fine 1 Press [ ] on the product. 2 Press [ ] to move to PICTURE and press [ ] on the prod uct. 3 Press [ ] to move to Fine and press [ ] on the produ ct. The follo wing screen w ill appear. 4 Adju[...]

73 5 Configuring Tint 5 Configuring Tint Adjust the tint of the screen. This menu is not available when Bright is set to Cinema or Dynamic Contrast mode. SAMSUNG MAGIC 5.1 SAMSUNG MAGIC Color Color is a new picture-q uality improvemen t technology d eveloped indepe ndently by Sa msung, which delivers vivid natur al colors without pic ture quality d[...]

74 Configuring Tint 5 5 Configuring Tint 5.2 Red Adjust the valu e of the colo r red in the p icture. (Range : 0~100) A higher value wil l increase the inte nsity of the color. This menu is not available when Color is in Full or Intelligent mode. 5.2.1 Configuring Red 1 Press [ ] on the product. 2 Press [ ] to move to COLOR and press [ ] on the pro[...]

75 Configuring Tint 5 5 Configuring Tint 5.3 Green Adjust the valu e of the colo r green in th e picture. (Ran ge: 0~100) A higher value wil l increase the inte nsity of the color. This menu is not available when Color is in Full or Intelligent mode. 5.3.1 Configuring Green 1 Press [ ] on the product. 2 Press [ ] to move to COLOR and press [ ] on t[...]

76 Configuring Tint 5 5 Configuring Tint 5.4 Blue Adjust the valu e of the colo r blue in the p icture. (Ran ge: 0~100) A higher value wil l increase the inte nsity of the color. This menu is not available when Color is in Full or Intelligent mode. 5.4.1 Configuring Blue 1 Press [ ] on the product. 2 Press [ ] to move to COLOR and press [ ] on the [...]

77 Configuring Tint 5 5 Configuring Tint 5.5 Color Tone Adjust the gener al color tone of th e picture.  This menu is not available when Color is in Full or Intelligent mode.  This menu is not available when Angle is enabled. 5.5.1 Configuring the Color Tone Settings 1 Press [ ] on the product. 2 Press [ ] to move to COLOR and press [ ] on th[...]

78 Configuring Tint 5 5 Configuring Tint 5.6 Gamma Adjust the mid-ra nge brigh tness (Gamma) of the pictur e. This menu is not available when Angle is enabled. 5.6.1 Configuring Gamma 1 Press [ ] on the product. 2 Press [ ] to move to COLOR and press [ ] on the produc t. 3 Press [ ] to move to Gamma and press [ ] on the product. The following scree[...]

79 6 Resizing or Relocating the Screen 6 Resizing or Relocating the Screen 6.1 H-Position & V-Position H-Position : Move the screen to the left or ri ght. V-Positio n : Move the sc reen up or down. This menu is available in Analog mode only. 6.1.1 Configuring H-Position & V-Position 1 Press [ ] on the product. 2 Press [ ] to move to SIZE&am[...]

80 Resizing or Relocating the Screen 6 6 Resizing or Relocating the Screen 6.2 Image Size Change the pict ure size. 6.2.1 Changing the Image Size 1 Press [ ] on the product. 2 Press [ ] to move to SIZE&POSITION and press [ ] on the prod uct. 3 Press [ ] to move to Image Size and press [ ] on the product. The followi ng screen will appear.  A[...]

81 Resizing or Relocating the Screen 6 6 Resizing or Relocating the Screen 6.3 Menu H-Position & Menu V-Position Menu H-Position : Move the menu position to the le ft or right. Menu V-Position : Move the menu p osition up or do wn. 6.3.1 Configuring Menu H- Position & Menu V-Position 1 Press [ ] on the product. 2 Press [ ] to move to SIZE&a[...]

82 7 Setup and Reset 7 Setup and Reset 7.1 Reset Return all the sett ings for the produ ct to the defaul t factory settings. 7.1.1 Initializing Settings (Reset) 1 Press [ ] on the product. 2 Press [ ] to move to SETUP&RESET and press [ ] on the produc t. 3 Press [ ] to move to Reset and press [ ] on the prod uct. The followi ng screen will app [...]

83 Setup and Reset 7 7 Setup and Reset 7.2 Language Set the menu language.  A change to the language setting will only be applied to the onscreen menu display.  It will not be applied to other functions on your PC. 7.2.1 Changing the Language 1 Press [ ] on the product. 2 Press [ ] to move to SETUP&RESET and press [ ] on the produc t. 3 P[...]

84 Setup and Reset 7 7 Setup and Reset 7.3 Eco Saving The Eco Saving function reduces po wer consumption by controlling the electric current used by the monitor pane l. This menu is not available when Bright is in Dynamic Contrast mode. 7.3.1 Configuring Eco Savi ng 1 Press [ ] on the product. 2 Press [ ] to move to SETUP&RESET and press [ ] on[...]

85 Setup and Reset 7 7 Setup and Reset 7.4 Off Timer On/Off Enable or disable th e off timer that automa tically powers off the pr oduct. 7.4.1 Configuring Off Timer On/Off 1 Press [ ] on the product. 2 Press [ ] to move to SETUP&RESET and press [ ] on the produc t. 3 Press [ ] to move to Off Timer On/Off and press [ ] on the pro duct. The foll[...]

86 Setup and Reset 7 7 Setup and Reset 7.5 Off Timer Setting The off timer can be set within a ra nge of 1 to 23 hours. The product will au tomatically power off after the specified nu mber of hou rs. This menu is available only when Off Timer On/Off is set to On . 7.5.1 Configuring Off Timer Setting 1 Press [ ] on the product. 2 Press [ ] to move [...]

87 Setup and Reset 7 7 Setup and Reset 7.6 PC/AV Mode Set PC/AV Mode to AV . The picture size will be enlarged. This option is useful when you view a movie. PC/AV Mode is only available in Digital mode. 7.6.1 Configuring PC/AV Mode 1 Press [ ] on the product. 2 Press [ ] to move to SETUP&RESET and press [ ] on the produc t. 3 Press [ ] to move [...]

88 Setup and Reset 7 7 Setup and Reset 7.7 Key Repeat Time Control the response rate of a button when the bu tton is press ed. 7.7.1 Configuring Key Repeat Time 1 Press [ ] on the product. 2 Press [ ] to move to SETUP&RESET and press [ ] on the produc t. 3 Press [ ] to move to Key Repeat Time and press [ ] on the pro duct. The follow ing screen[...]

89 Setup and Reset 7 7 Setup and Reset 7.8 Customized Key You can customize Customized Key as follows. 7.8.1 Configuring Customized Key 1 Press [ ] on the product. 2 Press [ ] to move to SETUP&RESET and press [ ] on the produc t. 3 Press [ ] to move to Customized Key and press [ ] on the produc t. The followi ng screen will appear.  Angle - [...]

90 Setup and Reset 7 7 Setup and Reset 7.9 Auto Source You can activate Auto Source . 7.9.1 Configuring Auto Source 1 Press [ ] on the product. 2 Press [ ] to move to SETUP&RESET and press [ ] on the produc t. 3 Press [ ] to move to Auto Source and press [ ] on the product. The f ollowing screen will appear.  Auto : The input source is autom[...]

91 Setup and Reset 7 7 Setup and Reset 7.10 Display Time Set the on-screen disp lay (OSD) menu to automatically disapp ear if the me nu is not used fo r a specified period of time. Display Time can be used to spec ify the time after w hich you want the OSD menu to disappear. 7.10.1 Configuring Display Time 1 Press [ ] on the product. 2 Press [ ] to[...]

92 Setup and Reset 7 7 Setup and Reset 7.11 Menu Transparency Set the transp arency for th e menu windo ws: 7.11.1 Changing Menu Transparency 1 Press [ ] on the product. 2 Press [ ] to move to SETUP&RESET and press [ ] on the produc t. 3 Press [ ] to move to Menu Tra nsparency a nd press [ ] on the p roduct. The fo llowing screen will appear. 4[...]

93 8 INFORMATION Menu a nd Others 8 INFORMATION Menu and Others 8.1 INFORMATION View the current i nput source, frequency a nd resolutio n. 8.1.1 Displaying INFORMATION 1 Press [ ] on the product. 2 Press [ ] to move to INFORMATION . The cu rrent inpu t source, f requency and resolution will appear. The displayed image may differ depending on the m[...]

94 9 Installing the Software 9 Installing the Software 9.1 Natural Color 9.1.1 What is Natural Color? One of the p roblems with using a PC is that the colors you s ee on the scre en are different from the c olors of printed p ictures or sou rce images input through a sc anner or dig ital camera. N atural Color is a color managemen t system develope[...]

95 Installing the Software 9 9 Installing the Software 9.2 MultiScreen MultiScreen ena bles users t o use the mo nitor by part itioning multip le sections . 9.2.1 Installing the Software 1 Insert the installation CD into the CD-ROM drive. 2 Select the "Mult iScreen" setup pr ogram. If the pop-up screen for the software installati on does [...]

96 Installing the Software 9 9 Installing the Software 9.2.2 Removing the Software Click [ Start ], select [ Settings ]/[ Control Panel ], and then d ouble-click [ Add or Remove Programs ]. Select "MultiScre en" from th e program lis t and click the [ Add / Delete ] button.[...]

97 10 Troubleshooting Guide 10 Troubleshooting Guide 10.1 Requirements Before Co ntacting Samsung Customer Service Center 10.1.1 Testing the Product Before calling Samsung Customer Service Center, test your prod uct as follows. If the problem persists, contact Samsung Customer Service Center. Check if your p roduct is oper ating normally by u sing [...]

98 Troubleshooting Guide 10 10 Troubleshooting Guide " Not Optimum Mode " is displayed. This message appears if the signal from th e graphics car d exceeds th e maximum resolution or frequency fo r the product. Change the maximu m resolution a nd frequency t o suit the produ ct performance, referring to Standard Si gnal Mode Tab le (105pa[...]

99 Troubleshooting Guide 10 10 Troubleshooting Guide The volume is too low. Adjust the volume. If the volume is still low af ter turning it up to the maximum level, adju st th e volume on your PC sound card or software program. Source device issu e A beeping sound is heard when my PC is booting. If a beeping sound is heard when your PC is booting, [...]

100 Troubleshooting Guide 10 10 Troubleshooting Guide 10.2 Q & A Question Answer How can I change the frequency? Set the freque ncy on your graphics card.  Windows XP: Go to Control Panel Appearance and Themes Display Setting s Advanced Monitor , and adjust Refres h rate under Monitor sett ings .  Windows ME/2000: Go to Control Pa nel Dis[...]

101 Troubleshooting Guide 10 10 Troubleshooting Guide Refer to the user manual for your PC or graphics card for further instructions on adjustment. How can I change the resolution?  Windows XP: Go to Control Panel Appearance and Themes Display Settings , and adju st the resolution.  Windows ME/2000: Go to Control Panel Display Settings , and [...]

102 11 Specifications 11 Specifications 11.1 General Model Name TS190C TS220C TS240C Panel Size 19 inches (48 cm) 21.5 inches (55 cm) 24 inches (61 cm) Display area 408.2 mm (H) x 255.2 mm (V) / 16.1 inches (H) x 10.0 inches (V) 476.6 mm (H) x 268.1 mm (V) / 18.9 inches (H) x 10.1 inches (V) 518.4 mm (H) x 324.0 mm (V) / 20.4 inches (H) x 12.8 inch[...]

103 Specifications 11 11 Specifications The above specifications are subject to change without notice to improve quality. This device is a Class B digital apparatus. Plug-and-Play This monitor can be instal led and used with any Plug-and-Play compatible systems. Two-way data exchange between the monitor and PC system optimizes the monitor settings.[...]

104 Specifications 11 11 Specifications 11.2 PowerSaver The power-sa ving function of this produ ct reduces p ower consump tion by switching off the scree n and changing the colo r of the power LED if the produc t is not used for a specified period of time. The pow er is not turned off in powe r-saving mode. To switch the screen back on, pres s any[...]

105 Specifications 11 11 Specifications 11.3 Standard Signal Mode Table  This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Therefore, a resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you s[...]

106 Specifications 11 11 Specifications TS220C VESA, 1280 x 800 49.702 59.810 83.500 -/+ VESA, 1280 x 800 62.795 74.934 106 .500 -/+ VESA, 1440 x 900 55.935 59.887 106 .500 -/+ VESA, 1440 x 900 70.635 74.984 136 .750 -/+ Resolution Horizontal Frequen cy (kHz) Vertical Frequenc y (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 720 x 400 31.469 70.08[...]

107 Specifications 11 11 Specifications TS240C VESA, 1440 x 900 55.935 59.887 106 .500 -/+ VESA, 1440 x 900 70.635 74.984 136 .750 -/+ VESA, 1600 x 1200 75.000 60.000 162 .000 +/+ VESA, 1680 x 1050 65.290 59.954 146 .250 -/+ Resolution Horizontal Frequen cy (kHz) Vertical Frequenc y (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 720 x 400 31.469 7[...]

108 Specifications 11 11 Specifications  Horizontal Frequency The time required to scan a single line from the left to the right side of the screen is called a horizontal cycle. The reciprocal number of a horizontal cycle is called horizontal frequency. Horizontal frequency is measured in kHz.  Vertical Frequency Repeating the same picture do[...]

109 Appendix Appendix Contact SAMSUNG WORLDWIDE If you have any questions or comments relati ng to Samsung products, please contact the SAMSUNG customer care center. NORTH AMERICA U.S.A 1-800-SAMSUNG (726 -7864) http:/ /www.samsung.co m CANADA 1-800-SAMSUNG (726-7864) h ttp://www.samsu ng.com/ca http://www. samsung.com /ch_fr (French) MEXICO 01-800[...]

110 Appendix Appendix EUROPE ALBANIA 42 27 5755 http://www.s amsung.com AUSTRIA 0810 - SAMSUNG (7267864, € 0.07/min) http://www. samsung.com BELGIUM 02-201-24-18 http://www. samsung.com/be (Dutch) http://www. samsung.com /be_fr (French) BOSNIA 05 133 1999 http://www.samsung.com BULGARIA 07001 33 11 http://www.samsun g.com CROATIA 062 SAMSUNG (0 6[...]

111 Appendix Appendix PORTUGAL 808 20 - SAMSUNG (808 20 7267) http://www. samsung.com RUMANIA From landlin e : 08010-SAMSUNG (7267864) From landline & mobile : (+40) 21 206 01 10 http://www. samsung.com SERBIA 0700 Samsung ( 0700 726 7864 ) http://ww w.samsung.co m SLOVAKIA 0800 - SAMSUNG (0800-726 786) http://www. samsung.com SPAIN 902 - 1 - S[...]

112 Appendix Appendix UKRAINE 0-800-502-00 0 http://www.samsu ng.com/ua http://www. samsung.com / ua_ru BELARUS 810-800-500-55-50 0 http://www.sam sung.com MOLDOVA 00-800-500-55-500 http://www.sa msung.com ASIA PACIFIC AUSTRALIA 1300 36 2 603 http://www.sam sung.com NEW ZEALAND 0800 SAMSUNG (0800 726 786) http://www.samsung.com CHINA 400-810-5858 h[...]

113 Appendix Appendix MIDDlE EAST IRAN 021-8255 http:/ /www.samsung.co m OMAN 800-SAMSUNG (726-7864) http://www.samsung.com KUWAIT 183-2255 http://www.sam sung.com BAHRAIN 8000- 4726 http://www.samsung .com EGYPT 08000-726786 http://www.samsung.com JORDAN 800-22273 http://www.s amsung.com MOROCCO 080 100 2255 http://www.samsung.com SAUDI ARABIA 920[...]

114 Appendix Appendix Correct Disposal Correct Disposal of This Product (Waste Electri cal & Electronic Equipment) Correct disposal of batteries in this product (Applicable in the European Union and other Europe an countries w ith separat e collection systems) This marking on th e product, acce ssories or literature indicates that the pr oduct [...]

115 Appendix Appendix Terminology OSD(On Screen Display) On screen display (O SD) allows you to config ure on-screen setting s to optimize the pic ture quality as required. It allows you to ch ange the scr een brightne ss, tint, size and many othe r settings us ing menus displayed on the screen . Coarse Coarse refers t o the frequency o f radio wav[...]

116 Appendix Appendix Vertical Frequency One image is ma de of numerou s horizontal lines. The vertica l frequency is m easured in Hz an d represents how many images ca n be created p er second by t hose horizontal line s. A vertical frequency o f 60 means that an image is tr ansmitted 6 0 times per second. The ver tical frequency is also called &q[...]

Index 117 Index A About "Zero Client " 29 Auto Source 90 B Before Conn ecting 57 Blue 76 Brightness 66 C Checking the C ontents 19 Cleaning 4 Coarse 71 Color Tone 77 Configuring Brightness in the Initial Screen 93 Connecting and Using a PC 58 Connecting the Product to a PC to Use the "Zero Client " 30 Contact SAMSUNG WORLDWIDE 1[...]

Index Index 118 R Red 74 Requirements Befo re Contacting Sams ung Customer Service Center 97 Reset 82 S Safety Precautions 6 SAMSUNG MAGIC Angle 70 SAMSUNG MAGIC Bright 69 SAMSUNG MAGIC Color 73 Sharpness 68 Standard Signal Mo de Table 105 T Terminology 115 U Using the "Zero Client" 33[...]