Sansui HDLCD2600 manual

R 26" WIDE TFT LCD TELEVISION WITH DIGIT AL TUNER HDLCD2600 O WNER’S MANU AL Bef ore operating the unit, please read this manual thoroughly . A TTENTION If you purchase a universal remote control from your local retailer, please contact the remote manufacturer for the required programming code. IF CONT ACT WITH CUSTOMER SER VICE IS REQUIRED [...]

2 Location of the required Marking The rating sheet and the saf ety caution are on the rear of the unit. The lightning flash with arrowhead symbol, within an equilateral triangle is intended to aler t the user to the presence of uninsulated dangerous v oltage within the product's enclosure that may be of sufficient magnitude to constitute a ri[...]

3 IMPOR T ANT SAFETY INSTR UCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with a clean dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near [...]

4 IMPORTANT SAFETY INSTRUCTIONS 19) If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is grounded to provide some protection against voltage surges and built-up static charges, Section 810 of the National Electrical Code, ANSI/NFPA 70, provides information with respect to proper grounding of the mas[...]

5 IMPORTANT SAFETY INSTRUCTIONS CONDENSA TION Moisture will form in the operating section of the pla yer if the pla yer is brought from cool surroundings into a warm room or if the temperature of the room rises suddenly . When this happens , play er's performance will be impaired. T o pre vent this , let the play er stand in its new surroundin[...]

6 Memorizing channels .................................................................. 18 TV operation ................................................................................ 21 Labeling channels ....................................................................... 24 Setting the V -Chip ................................................[...]

7 Features • Integrated Digital T uner - Y ou can view digital broadcasts without using a Digital TV Set-T op Box. • Closed Caption Decoder With Full T e xt Mode - Displays te xt captions or full screen text on the screen f or hearing impaired viewers. • Picture Adjustments Using The Remote Contr ol - The On-Screen display allows precise remo[...]

8 Pa r ts and functions Remote sensor POWER indicator Red: Standby Green: On (It alternately blinks to red and green while star ting. ) RF (ANT) IN jack AV 2 VIDEO IN jack PC IN jack Front T op Rear side To display the menu screen. Press MENU button to display the menu screen. CHANNEL ▲ / ▼ buttons and VOLUME +/– buttons can be used to select[...]

9 Remote control 2 3 11 6 9 13 1 7 15 14 12 8 10 5 16 4 1. Open the battery compartment cover. 2. Install two “AA” batteries (supplied). HOW TO INSTALL BATTERIES Before using the remote control, batteries must first be installed. 3. Replace the battery compartment cover. BATTERY PRECAUTIONS These precautions should be followed when using batter[...]

10 If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a Cable TV service, see page 11 for Cable TV connections. Combination VHF/UHF Antenna (Separate VHF and UHF 300 ohm twin-lead wires) Combination VHF/UHF Antenna (Single 75 ohm cable or 300 ohm twin-lead wire) Ante[...]

11 FOR SUBSCRIBERS TO BASIC CABLE TV SERVICE For basic Cable TV service not requiring a Converter/ Descrambler box, connect the 75 ohm Coaxial Cable directly to the Antenna Jack on the back of the TV. Cable TV connections FOR SUBSCRIBERS TO SCRAMBLED CABLE TV SERVICE If you subscribe to a Cable TV service in which basic channels are unscrambled and[...]

12 Connections to other equipment The e xact arrangement you use to interconnect v arious video and audio components to the LCD TV is dependent on the model and f eatures of each component. Check the Owner's Manual pro vided with each component f or the location of video and audio inputs and outputs. The connection diagrams belo w are offered [...]

13 Y P B P R To connect the LCD TV to a D VD play er/Satellite receiver If your D VD pla yer or Satellite receiv er has a S-Video out jack, connect cords as sho wn. To connect the LCD TV to a D VD player with component video If your D VD pla yer has component video out jac ks, connect your LCD TV to a D VD play er using a component video cord. It c[...]

14 Connections to other equipment To connect the LCD TV to a DTV receiver/set-top box If you connect a DTV receiv er/set-top bo x, connect your LCD TV to a DTV receiver/set-top box using a compo- nent video cord. Y P B P R To Component OUT To Audio OUT A udio cord (not supplied) Video cord (not supplied) Left Side of the LCD TV To COMPONENT IN To A[...]

15 TV GAME Connections to other equipment Coaxial digital cable (not supplied) COAXIAL DIGIT AL A UDIO OUT Left side of the LCD TV Using an A V Amplifier with b uilt-in digital surround If you are using an Amplifier with b uilt-in digital surround sound, you can enjo y various audio systems including Dolby Digital Surround audio that sounds just li[...]

16 Connections to other equipment V GA cable (not supplied) To connect the LCD TV to a PC (Personal Computer) Before you connect this LCD TV to your PC, change the adjustment of your PC’s Resolution and Refresh rate (60 Hz). Connect one end of a (male to male) VGA cable to the video card of the computer and the other end to the VGA connector PC M[...]

17 1 To tur n on the TV , press POWER . (PO WER indicator on the front of the unit blinks while star ting. It ma y take appro x. 15 seconds for a picture to appear on screen.) 2 Press MENU . The menu screen will appear . 3 Press ▲ or ▼ to select “Setup” menu, then press . 4 Press ▲ or ▼ to select “Menu Language”. 5 Press or ENTER to[...]

18 1 Press MENU . The menu screen will appear . 2 Press ▲ or ▼ to select “Setup” menu, then press . 3 Press ▲ or ▼ to select “T uning Band”. 4 Press or ENTER to select “Air” or “Cable”. 5 Press MENU to return to the nor mal screen. This TV is equipped with a c hannel memory feature which allows c hannels to skip up or down t[...]

19 1 Press MENU . The menu screen will appear . 2 Press ▲ or ▼ to select “Setup” menu, then press . Press ▲ or ▼ to select “Auto Ch Search”. 3 Press or ENTER . The TV will begin memorizing all the channels av ailable in y our area. • It ma y take from 15 minutes to 30 minutes to complete memorizing digital cable channels. Dependin[...]

20 Memorizing channels Manual Ch Set Y ou can select the channel that you want to skip . 1 Press MENU . The menu screen will appear . 2 Press ▲ or ▼ to select “Setup” menu, then press . Press ▲ or ▼ to select “Manual Ch Set”, then press or ENTER . Manual Ch Set menu will appear . 3 Press ▲ or ▼ to select the channel that you wan[...]

21 TV operation 1 To tur n on the TV , press POWER . (PO WER indicator on the front of the unit blinks while star ting. It ma y take appro x. 15 seconds for a picture to appear on screen.) 2 Adjust the volume le vel by pressing V OL + or – . The v olume le vel will be indicated on the screen by white bars . As the v olume le vel increases, so do [...]

22 DISPLAY Press DISPLA Y to display the current inf or mation on the screen. When the TV receives a digital signal, the digital information will appear . • Channel number • Broadcast program name • Station name • Program guide •V -CHIP RA TING When the TV receives a analog signal, the analog inf or mation will appear . • Channel number[...]

23 SLEEP The sleep timer allows y ou to set a time when the LCD TV auto- matically switches to standb y . 1 Press MENU . The menu screen will appear . 2 Press ▲ or ▼ to select “Feature” menu, then press . 3 Press ▲ or ▼ to select “Sleep Timer”. 4 Press or ENTER repeatedly to select the desired sleep time (Off , 15 min, 30 min, 45 mi[...]

24 Labeling channels 1 Press MENU , then press ▲ or ▼ to select “Setup” menu, then press . 2 Press ▲ or ▼ to select “Channel Labels”, then press or ENTER . The “Channel Labels” menu will appear . 3 Press ▲ or ▼ to select a channel you w ant to label. 4 Press or to enter a character in the first space . Press ▲ or ▼ repea[...]

25 Setting the V -Chip 1 Press MENU . The menu screen will appear . Press ▲ or ▼ to select “F eature” menu, then press . 2 Press ▲ or ▼ to select “P assw ord Set”, then press or ENTER . 3 Use Number buttons (0-9) to enter your pass word (The f actor y default pass word is “0000”). 4 Select and enter a pass word (4 digits) using [...]

26 To set the V-Chip 1 Press MENU . Press ▲ or ▼ to select “Feature” menu, then press . 2 Press ▲ or ▼ to select “P arental Control”, then press or ENTER . Use Number buttons (0-9) to enter your pass w ord. The Parental Control Menu appears. 3 Press ▲ or ▼ to select “US Ratings”, then press or ENTER . 4 Press ▲ / ▼ / / t[...]

27 To change the password 1 Press MENU . The TV menu screen will appear . 2 Press ▲ or ▼ to select “Feature” menu, then press . 3 Press ▲ or ▼ to select “P assw ord Set”, then press or ENTER . 4 Use Number buttons (0-9) to enter your pass word. 5 Enter a new pass word using Number buttons (0-9) . 6 Enter the same passw ord again to [...]

28 1 Press MENU in the digital channel. Press ▲ or ▼ to select “Feature” menu, then press . 2 Press ▲ or ▼ to select “P arental Control”, then press or ENTER . Use Number buttons (0-9) to enter your pass w ord. The Parental Control Menu appears. 3 Press ▲ or ▼ to select “Advanced Rating”, then press to select “On”. The ?[...]

29 Closed Caption Setup Audio Feature Picture Sleep Timer Off Advanced Video Menu Passw ord Set Parental Control NTSC CC Off A TSC CC Off Digital Closed Caption To Move To Select To Exit Enter Menu Setup Audio Feature Picture Sleep Timer Off Advanced Video Menu Passw ord Set Parental Control NTSC CC Off A TSC CC Off Digital Closed Caption To Move T[...]

30 CC advanced Digital Closed Caption Style Automatic Size Automatic Font Automatic T ext Color Automatic T ext Opacity Automatic Background Color Automatic Background Opacity Automatic Edge Effect Automatic Edge Color Automatic DECIDED BY BROADCASTING To Move To Select To Exit Enter Menu Digital Closed Caption Style Size Font Te xt Color Te xt Opa[...]

31 Setting the picture size Normal picture size In some cases, this image will displa y the size of standard 4:3 with a blac k side bar . 1 Press MENU . Press ▲ or ▼ to select “Picture” men u, then press . 2 Press ▲ or ▼ to select “Picture Size”, then press or ENTER to select the desired picture size , as described below and on the [...]

32 A B C D E F G - - - - - - - - - - - - - - - - Cinema picture size (for letter bo x programs) The entire picture is unif or mly enlarged—it is stretched the same amount both wider and taller (retains its original propor tion). The top and bottom edges of the picture ma y be hidden. NO TE: • In HDMI or COMPONENT mode with a scanning rate of 72[...]

33 Adjusting the picture preference/Picture control adjustment Y ou can select f our picture modes—Vivid, Standard, Movie and User—as described in the following table: 1 Press MENU . Then press ▲ or ▼ to select “Picture” menu, then press . 2 Press ▲ or ▼ to select “Picture Mode”. 3 Press or ENTER to select the item you w ant to [...]

34 DNR DNR (Digital Noise Reduction) can reduce the roughness of the picture. 1 Press MENU . Then press ▲ or ▼ to select “Feature” menu, then press . 2 Press ▲ or ▼ to select “Advanced Video Menu”, then press or ENTER . 3 Press ▲ or ▼ to select “DNR”. Press or ENTER to select “On” or “Off ”. DNR/Selecting the color t[...]

35 3D Y/C reduces visible interference in your TV picture. This is useful when receiving a broadcast with a weak signal (especially a Cable c hannel) or playing a video cassette or disc damaged by repeated use. 1 Press MENU . Then press ▲ or ▼ to select “Feature” menu, then press . 2 Press ▲ or ▼ to select “Advanced Video Menu”, the[...]

36 Selecting Stereo/Second A udio Pr ogram (SAP)/ Sound control adjustment The multi-channel TV sound (MTS) f eature pr ovides high-fidelity stereo sound. MTS also can transmit a second audio program (SAP) containing a second language or other audio informa- tion. When the TV receives a stereo or SAP broadcast, the word “Stereo” or “SAP” di[...]

37 Selecting the audio language When two or more audio langua ges are included in a digital signal, you can select one of the audio langua ge . 1 Press MENU . Then press ▲ or ▼ to select “Audio” menu, then press . 2 Press ▲ or ▼ to select “Audio Language”. Then press or ENTER to select your desired language. 3 Press MENU to return t[...]

38 1 Press MENU . Then press ▲ or ▼ to select “Setup” menu, then press . 2 Press ▲ or ▼ to select “Reset”. 3 Press or ENTER to return your settings to the f actor y settings. 4 Press MENU to retur n to the normal screen. NO TE: • Signal meter f eature is not av ailab le for analog channels . • After 180 seconds, DTV Signal scree[...]

39 Example: Adjust the H-Pos in the component mode. 1 Press INPUT SELECT repeatedly to select the component mode. 2 Press MENU during the component mode. Then press ▲ or ▼ to select “Feature” menu, then press . 3 Press ▲ or ▼ to select “Component Set”, then press or ENTER . 4 Press ▲ or ▼ to select “H-Pos”, then press or ENT[...]

40 Most types of television interference can be remedied by adjusting the height and position of the VHF/ UHF antenna. Outdoor antennas are recommended for best results. The most common types of television interference are shown below. If one of these symptoms appear when the TV is connected to a Cable TV system, the disturbance may be caused by th[...]

41 Tr oubleshooting Use the f ollowing checklist f or troubleshooting if y ou hav e problems with your LCD TV . Consult your local dealer or ser vice outlet if prob lems persist. Be sure all connections are properly made when using with other units. R FOR CUSTOMER SERVICE, ADDITIONAL SET-UP OR OPERATING ASSISTANCE PLEASE CALL: 1-800-289-0980 WHEN C[...]

42 Specifications Po w er supply: A C 120 V 60 Hz Po w er consumption: Operation: 125 W Stand by: 1 W W eight: 26.5 lbs (12.0 kg) Dimensions: Width: 26-1/8 inches (663 mm) Height: 19-1/2 inches (495 mm) Depth: 8-5/16 inches (211 mm) Inputs: VIDEO: 1 V (p-p)/75 ohms A UDIO: –8 dBm/50k ohms S-VIDEO: Y : 1 V (p-p), 75 ohms C: 0.286 V (p-p), 75 ohms [...]

43 LIMITED W ARRANTY 26” WIDE LCD TELEVISION R ORION warrants this product to be free from man ufacturing def ects in material and wor kmanship under nor mal use and conditions f or a period of 90 days from date of original purchase in the United States. Should ser vice be necessary under this warranty f or any reason due to a manuf acturing defe[...]

Printed in Thailand J33S0101A SH 07/08 N 33S0101A_En_p40-back 7/23/07, 3:15 PM 44[...]