Sanyo CP21SF1 manual

CA21XS2S CP21XS2S CA21YS2S CP21YS2S CA21KS2 CP21KS2 CA21KS2K CP21KS2K CA21SF1 CP21SF1 Instruction Manual Colour T elevision Flat Screen Multi System CATV Hyper Band 256 Programmes with Automatic T uning AV Stereo Sound System DVD Input with V ideo Component INST. MANUAL-BE4D-A (AUS) 4/1/08 5:37 PM Page 1[...]

2 Warning  and  Caution If the televi- sion is to be built into a compartment or similarly enclosed, the minimum dis- tances must be maintained. Heat build-up can reduce the service life of your televi- sion, and can also be dangerous. Never stand on, lean on or push sud- denly the television or its stand. Y ou should pay special attention to[...]

Contents 3 W arnings and Cautions . . . . . . . . . . . . . . 2 Contents . . . . . . . . . . . . . . . . . . . . . . . . . 3 Plug & Play . . . . . . . . . . . . . . . . . . . . . . . 3 Front Control . . . . . . . . . . . . . . . . . . . . . 4-5 Remote Control T ransmitter . . . . . . . . . . 6 Battery Installation of the Remote Control T ransmi[...]

4 Model CA21XS2S, CP21XS2S Front  Control Each button listed in this section has the same function as it’s corresponding button on the remote control. 1 2 3 6 7 8 9 VIDEO TV/A V MENU - + CH L-AUDIO-R 4 5 10 Model CA21YS2S, CP21YS2S VIDEO A V2 IN TV/A V MENU - + CH L-AUDIO-R Press to open Press to open 1 2 3 6 7 4 5 8 9 10 1. Mains ON/OFF Butto[...]

5 M E N U T V / A V P O W E R C H - + Model CA21KS2, CP21KS2, CA21KS2K, CP21KS2K Front  Control Each button listed in this section has the same function as it’s corresponding button on the remote control. L - AUDIO - R VIDEO 1 2 3 4 5 6 7 8 9 10 1. Mains ON/OFF Button 2. Remote Control Detector 3. Stand-by and Power Indicator 4. Programme UP/D[...]

6 Remote  Control  Transmitter -/- - -/- - P P BASS SOUND S. SYS SURROUND A • B PICTURE SW AP CH SCAN TIMER JXPSG TV / A V MENU CH CH Power ON/OFF button AL TERNA TE button VOLUME + button TIMER button MUTE button CHANNEL SCAN button SURROUND button PICTURE MODE button Programme UP button RECALL/COLOUR SYSTEM button MENU button TV / A V Sel[...]

7 General  Operation -/- - -/- - -/- - -/- - -/- - -/- - -/- - Standby/Power-on To switch the TV on and off. For shutting of f a power supply completely , Press the Mains ON/OFF button on the front control of TV set. -/- - -/- - -/- - -/- - -/- - -/- - -/- - Sound  mute To switch the sound from the speakers. The sound changes as follows; norm[...]

8 General  Operation ■ ■ If no operation is performed after the TV has been switched on by the ON TIMER, such as if you are not at home, the TV will be automatically switched off after approximately 2 hours ■ ■ If the TV is already switched on when the time set for the ON TIMER has been reached, only the programme position will be change[...]

9 Colour  and  Sound  System ❒ Setting  of  the  Sound  System BG (5.5MHz) DK (6.5MHz) I (6.0MHz) M (4.5MHz) 2) T o enter a sound system selection into the memory , select “MEMORY” and press the VOLUME + or - button. (Semi-Auto or Manual T uning mode ) SEARCH SYSTEM MODE POSITION SEMI ST ART 2 AUTO SKIP MEMORY OFF -- SIF [...]

10 Picture  Adjustment ❒ Basic  Picture  Adjustment  Operation  (Continued) ■ To return to the normal TV mode, press the MENU button. ( Or will automatically return to the normal TV mode after 20 seconds.) AUDIO LANGUAGE PRESET PICTURE BRIGHTNESS SHARPNESS CONTRAST WHITE TONE FINE TUNING 25 COLOUR SHARPNESS CONTRAST WHITE TONE FI[...]

11 Tuning  of  the  Channels Up to 256 broadcast stations in your reception area can be stored in the electronic memory . There are three ways of tuning as follows; 1. Automatic T uning (the basic way): All receivable channels are automatically tuned in and memorized in consecutive programme position. 2. Semi-Auto T uning: Use to preset a [...]

12 This function can be utilized after Automatic T uning. For example, to copy a TV channel on pro- gramme position “2” onto programme position “6”; 2 Use this channel swapping feature to swap the channels between two stored programme position. This feature is particularly useful after automatic tuning. For example, to swap the channel betw[...]

13 Any number of channels maybe set as Skip Channels. SEARCH SYSTEM MODE SEMI ST ART AUTO MEMORY -- SIF BG POSITION 4 SKIP ON SELECT ADJUST BACK EXIT SEARCH SYSTEM MODE POSITION SEMI ST ART 4 AUTO SKIP ON SIF BG MEMORY OK 4 Select “SKIP” by pressing the Programme UP or DOWN button,then press the VOLUME + or - button to set SKIP to ON. T o cance[...]

14 Setting  of  the  OSD  Language Select “ ENGLISH ”, “ ”, “ ”, “ ”, “ FRANÇAIS ”, “ PORTUGUES” by pressing the Programme UP or DOWN button. T o return to the normal TV mode, press the MENU button. P C N N y C E N G L I S H E N G L I S H AUDIO LANGUAGE PRESET PICTURE AUDIO PRESET PICTURE LANGUAGE FRANCAIS PORTU[...]

15 ■ ■ When watching a video program input from the A V1 terminal, press the TV/A V button to select A V1. Whenever the TV/A V button is pressed, the mode will change as follows: ■ ■ Y ou can select a TV programme while watching a playback from a VCR For example: ● To select programme position “9” while watching a playback from extern[...]

16 Aerial Socket The A V apparatus can also be connected to the aerial socket of your TV receiver . Presetting to watch the video input 1. Playback the VCR . 2. T une a VCR playback in programme position that you want. (See Semi-Auto T uning and Manual T uning on pages 1 1.) For further details concerning this connection and adjustment, refer to th[...]

17 The surface of the cabinet can be damaged if not properly maintained. Many common household aerosol sprays, cleaning agents, solvents and polishes will cause permanent damage to the fine surface. 1. Unplug the power cord before cleaning the T elevision. 2. Clean the screen with a soft cloth dampened with glass cleaner or warm water . 3. Clean th[...]

18 Power Source AC 127-240 V olts, 50/60Hz Colour System P AL/NTSC4.43/NTSC/P AL-60Hz Sound System B/G, I, D/KK’, M/M Channel Coverage VHF: E2-E12, A2-A13, R1-R12, J1-J12, K1-K9 UHF: 21-69, A14-A69, J13-J62, CA TV: S1 - S41, X, Y , Z, Z+1, Z+2 Aerial input impedance 75 Ω Audio output (RMS) Model: CA21YS2S, CP21YS2S, CA21KS2, CP21KS2, CA21SF1, C[...]

19 Before requesting service check the following chart. “GHOSTS” Reflections of signals from mountains or high buildings will cause multiple images, called “Ghosts”. These abnormal conditions can be reduced to minimum by repositioning aerial or by installing new one suited for your area. “INTERFERENCE” Interference may be caused by elec[...]

SANYO ELECTRIC Co., Ltd. Part No. 1AA6P1P5578-A BE4D-A (FC8-A) INST. MANUAL-BE4D-A (AUS) 4/1/08 5:37 PM Page 20[...]