Seagate ST1000NM0033 manual

Product Manual Constellation ® ES.3 Serial ATA 100671511 Rev. A October 2012 Standard models ST4000NM0033 ST3000NM0033 ST2000NM0033 ST1000NM0033 Self-Encrypting drive models ST4000NM0053 ST3000NM0053 ST2000NM0053 ST1000NM0053 SED-ISE* Models ST4000NM0103 ST3000NM0103 ST2000NM0103 ST1000NM0103 * Instant Secure Erase[...]

© 2012 Seagate Technology LLC. All rights reserved. Publication number: 100671511, Rev. A October 2012 Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. Constellation ES and SeaTools are either trademarks or registered trademarks of Seagate Technology LLC [...]

Constellation ES.3 Serial ATA Product Manual, Rev. A Contents Seagate® Technology Support Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.0 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

Constellation ES.3 Serial ATA Product Manual, Rev. A 5.3 Random number generator (RNG) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 5.4 Drive locking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 5.5 Data bands . . . . . . . . . . [...]

Constellation ES.3 Serial ATA Product Manual, Rev. A 1 For information regarding online support and services, visit http://www.seagate.com/www/en-us/about/contact_us/ Available services include: • Presales & Technical support • Global Support Services telephone numbers & business hours • Authorized Service Centers For information rega[...]

2 Constellation ES.3 Serial ATA Product Manual, Rev. A[...]

C ONSTELLATION ES.3 S ERIAL ATA P RODUCT M ANUAL , R EV . A 3 1.0 I NTRODUCTION This manual describes the functional, mechanical and interface specifications for the following Seagate Constellation ® ES.3 Serial ATA model drives:. These drives provide the following key features: • 7200 RPM spindle speed. • PowerChoice™ for selectable power s[...]

4 C ONSTELLATION ES.3 S ERIAL ATA P RODUCT M ANUAL , R EV . A 1.1 A BOUT THE S ERIAL ATA INTERFACE The Serial ATA interface provides several advantages over the traditional (parallel) ATA interface. The primary advantages include: • Easy installation and configuration with true plug-and-play connectivity. It is not necessary to set any jumpers or[...]

C ONSTELLATION ES.3 S ERIAL ATA P RODUCT M ANUAL , R EV . A 5 2.0 D RIVE SPECIFICATIONS Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the phrases the drive and this drive are used throughout this manual to indicate the following drive models: 2.1 S PECIFICATION SUMMAR[...]

6 C ONSTELLATION ES.3 S ERIAL ATA P RODUCT M ANUAL , R EV . A *One GB equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. **During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic a[...]

C ONSTELLATION ES.3 S ERIAL ATA P RODUCT M ANUAL , R EV . A 7 2.2 F ORMATTED CAPACITY Formatted capacity* Guaranteed sectors Bytes per sector 4TB 7,814.037,168 512 3TB 5,860,533,168 2TB 3,907,029,168 1TB 1,953,525,168 *One GB equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environm[...]

8 C ONSTELLATION ES.3 S ERIAL ATA P RODUCT M ANUAL , R EV . A 2.6 P OWER SPECIFICATIONS The drive receives DC power (+5V or +12V) through a native SATA power connector. See Figure 10 on page 26. 2.6.1 Power consumption Power requirements for the drives are listed in the table on page 9. Typical power measurements are based on an average of driv es [...]

C ONSTELLATION ES.3 S ERIAL ATA P RODUCT M ANUAL , R EV . A 9 *During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels .. Table 2 4TB Drive DC power requirements Notes 6.0Gb mode Voltage +5V +12V Regulation ± 5% Avg Idle Current * 0.28 0.50[...]

Table 3 3TB Drive DC power requirements Notes 6.0Gb mode Voltage +5V +12V Regulation ±5 % Avg Idle Current * 0.28 0.50 Advanced Idle Current * Idle_A 0.17 0.49 Idle_B 0.16 0.45 Idle_C 0.15 0.27 Standby 0.15 0.01 Maximum Start Current DC (peak DC) 3 σ 0.52 2.16 AC (Peak DC) 3 σ 0.85 2.89 Delayed Motor Start (DC max) 3 σ 0.16 0.01 Peak operating [...]

Table 4 2TB Drive DC power requirements Notes 6.0Gb mode Voltage +5V +12V Regulation ±5 % Avg Idle Current * 0.28 0.36 Advanced Idle Current * Idle_A 0.17 0.36 Idle_B 0.16 0.32 Idle_C 0.15 0.21 Standby 0.15 0.01 Maximum Start Current DC (peak DC) 3 σ 0.48 2.86 AC (Peak DC) 3 σ 0.67 2.91 Delayed Motor Start (DC max) 3 σ 0.16 0.01 Peak operating [...]

Table 5 1TB Drive DC power requirements Notes 6.0Gb mode Voltage +5V +12V Regulation ±5 % Avg Idle Current * 0.30 0.53 Advanced Idle Current * Idle_A 0.17 0.30 Idle_B 0.16 0.27 Idle_C 0.16 0.18 Standby 0.15 0.01 Maximum Start Current DC (peak DC) 3 σ 0.60 2.12 AC (Peak DC) 3 σ 1.57 2.89 Delayed Motor Start (DC max) 3 σ 0.16 0.01 Peak operating [...]

C ONSTELLATION ES.3 S ERIAL ATA P RODUCT M ANUAL , R EV . A 13 2.6.1.1 Typical current profiles Figure 1. 4TB Typical 5V startup and operation current profile Figure 2. 4TB Typical 12V startup and operation current profile[...]

14 C ONSTELLATION ES.3 S ERIAL ATA P RODUCT M ANUAL , R EV . A 2.6.1.2 Typical current profiles Figure 3. 3TB Typical 5V startup and operation current profile Figure 4. 3TB Typical 12V startup and operation current profile[...]

C ONSTELLATION ES.3 S ERIAL ATA P RODUCT M ANUAL , R EV . A 15 2.6.1.3 Typical current profiles Figure 5. 2TB Typical 5V startup and operation current profile Figure 6. 2TB Typical 12V startup and operation current profile[...]

16 C ONSTELLATION ES.3 S ERIAL ATA P RODUCT M ANUAL , R EV . A 2.6.1.4 Typical current profiles Figure 7. 1TB Typical 5V startup and operation current profile Figure 8. 1TB Typical 12V startup and operation current profile[...]

C ONSTELLATION ES.3 S ERIAL ATA P RODUCT M ANUAL , R EV . A 17 2.6.2 Conducted noise Input noise ripple is measured at the host system power supply across an equivalent 80-ohm resistive load on the +12 V line or an equivalent 15-ohm resistive load on the +5V line. • Using 12V power, the drive is expected to operate with a maximum of 120mV peak-to[...]

18 C ONSTELLATION ES.3 S ERIAL ATA P RODUCT M ANUAL , R EV . A 2.6.4.1 Extended Power Conditions - PowerChoice TM Utilizing the load/unload architecture a programmable power management interface is provided to tailor systems for reduced powe r consumption and performance requirements. The table below lists the supported power conditions available i[...]

C ONSTELLATION ES.3 S ERIAL ATA P RODUCT M ANUAL , R EV . A 19 PowerChoice Manufacture Default Power Condition Timer Values Default power condition timer values have been established to assure product reliability and data integrity. A minimum timer va lue threshold of two minutes ensures the appropriate amount of background drive maintenance activi[...]

20 C ONSTELLATION ES.3 S ERIAL ATA P RODUCT M ANUAL , R EV . A 2.7 E NVIRONMENTAL LIMITS Temperature and humidity values experienced by the drive must be such that condensation does not occur on any drive part. Altitude and atmospheric pressure specifications are referenced to a standard day at 58.7°F (14.8°C). Maximum wet bulb temperature is 82?[...]

C ONSTELLATION ES.3 S ERIAL ATA P RODUCT M ANUAL , R EV . A 21 2.7.4.1 Operating shock These drives comply with the performance levels specified in this document when subjected to a maximum operating shock of 70 Gs (read) and 40 Gs (write) based on half-sine shock pulses of 2ms. Shocks should not be repeated more than two times per second. 2.7.4.2 [...]

22 C ONSTELLATION ES.3 S ERIAL ATA P RODUCT M ANUAL , R EV . A 2.10 E LECTROMAGNETIC IMMUNITY When properly installed in a representative host system, the drive operates without errors or degradation in performance when s ubjected to the radio frequency (RF) environments defined in the following table: 2.11 R ELIABILITY 2.11.1 Annualized Failure Ra[...]

C ONSTELLATION ES.3 S ERIAL ATA P RODUCT M ANUAL , R EV . A 23 2.12 A GENCY CERTIFICATION 2.12.1 Safety certification These products are certified to meet the requirements of UL60950-1, CSA60950-1 and EN60950 and so marked as to the certify agen cy. 2.12.2 Electromagnetic compatibility Hard drives that display the CE mark comply with the European U[...]

24 C ONSTELLATION ES.3 S ERIAL ATA P RODUCT M ANUAL , R EV . A 2.13 E NVIRONMENTAL PROTECTION Seagate designs its products to meet environmental protection requirements worldwide, including regulations restricting certain chemical substances. 2.13.1 European Union Restriction of Hazardous Substances (RoHS) Directive The European Union Restriction o[...]

C ONSTELLATION ES.3 S ERIAL ATA P RODUCT M ANUAL , R EV . A 25 2.16 P RODUCT WARRANTY Beginning on the date of shipment to the customer and continuing for the period spe cified in your purchase contract, Seagate wa rrants that each product (including components and subassemblies) that fails to function properly under normal use due to defect in ma [...]

26 C ONSTELLATION ES.3 S ERIAL ATA P RODUCT M ANUAL , R EV . A 3.0 C ONFIGURING AND MOUNTING THE DRIVE This section contains the specifications and instructions for configuring and mounting the drive. 3.1 H ANDLING AND STATIC - DISCHARGE PRECAUTIONS After unpacking, and before installation, the drive may be expo sed to potential handling and electr[...]

C ONSTELLATION ES.3 S ERIAL ATA P RODUCT M ANUAL , R EV . A 27 3.4 D RIVE MOUNTING You can mount the drive in any orientation using four screws in the side-mounting holes or four screws in the bottom-mounting h oles. See Figure 11 for drive mounting dimensions. Follow these important mounting precautions when mounting the drive: • Allow a minimum[...]

28 C ONSTELLATION ES.3 S ERIAL ATA P RODUCT M ANUAL , R EV . A 3.4.1 Mechanical specifications Refer to Figure 11 for detailed mounting configuration dimensions. See Section 3.4, “Drive mounting.” . mm in mm in mm in Figure 11. Mounting dimensions—top, side and end view Weight: 4TB models 1.543 lb 700 g 3TB models 1.444 lb 655g 2TB models 1.4[...]

C ONSTELLATION ES.3 S ERIAL ATA P RODUCT M ANUAL , R EV . A 29 4.0 A BOUT FIPS The Federal Information Processing Standard (FIPS) Publication 140-2 is a U.S. Government Computer Security Standard used to accredit cryptographic modules. It is titled 'Security Requirement s for Cryptographic Modules (FIP S PUB 140-2)' and is issued b y the [...]

30 C ONSTELLATION ES.3 S ERIAL ATA P RODUCT M ANUAL , R EV . A 5.0 A BOUT SELF - ENCRYPTING DRIVES Self-encrypting drives (SEDs) offer encryption and security services for the protection of stored data, commonly known as “prot ection of data at rest.” These drives are compliant with the Trusted Computing Group (TCG) Enterprise Storage Specifica[...]

C ONSTELLATION ES.3 S ERIAL ATA P RODUCT M ANUAL , R EV . A 31 The variable "LockOnReset" should be set to "PowerCycle" to ensure that the data bands will be locked if power is lost. In addi tion "ReadLockEnabled" and "WriteLockEnabled" mu st be set to true in the locking table in order for the bands "Lo[...]

32 C ONSTELLATION ES.3 S ERIAL ATA P RODUCT M ANUAL , R EV . A 5.10 R EVERT SP SED models will support the RevertSP feature which erases all data in all bands on the device and returns the contents of all S Ps (Security Providers) on the device to their original factory state. In order to execute the RevertSP method the unique PSID (Ph ysical Secur[...]

C ONSTELLATION ES.3 S ERIAL ATA P RODUCT M ANUAL , R EV . A 33 6.0 S ERIAL ATA (SATA) INTERFACE These drives use the industry-standard Serial ATA interface that supports FIS data transfers. It supports ATA programmed input/ output (PIO) modes 0–4; multiword DMA modes 0–2, and Ultra DMA modes 0–6. For detailed information about the Serial ATA [...]

34 C ONSTELLATION ES.3 S ERIAL ATA P RODUCT M ANUAL , R EV . A Notes: 1. All pins are in a single row, with a 1.27mm (0.050”) pitch. 2. The comments on the mating sequence apply to the case of backplane blindmate connector only. In this case, the mating sequenc es are: • the ground pins P4 and P12. • the pre-charge power pins and the other gr[...]

C ONSTELLATION ES.3 S ERIAL ATA P RODUCT M ANUAL , R EV . A 35 Sanitize Device - Status Ext B4 H / 0000 H Sanitize Device - Crypto Scramble Ext B4 H / 0011 H Sanitize Device - Freeze Lock Ext B4 H / 0020 H Security Disable Password F6 H Security Erase Prepare F3 H Security Erase Unit F4 H Security Freeze F5 H Security Set Password F1 H Security Unl[...]

36 C ONSTELLATION ES.3 S ERIAL ATA P RODUCT M ANUAL , R EV . A 6.3.1 Identify Device command The Identify Device command (command code EC H ) transfers information about the drive to th e host following power up. The data is organized as a single 512-byte block of data, whose contents are shown in Table 9 on page 34. All reserved bits or words shou[...]

C ONSTELLATION ES.3 S ERIAL ATA P RODUCT M ANUAL , R EV . A 37 55 Number of current logical heads xxxx H 56 Number of current logical sectors per logical track xxxx H 57–58 Current capacity in sectors xxxx H 59 Number of sectors transferred during a Read Multiple or Write Multiple command xxxx H 60–61 Total number of user-addressable LBA sector[...]

38 C ONSTELLATION ES.3 S ERIAL ATA P RODUCT M ANUAL , R EV . A 100–103 Total number of user-addressable LBA sectors available (see Section 2.2 for related information). These words are required for drives that support the 48-bit addressing feature. Maximum value: 0000FFFFFFFFFFFFh. ST4000NM0033 = 7,814.037,168 ST4000NM0053 = 7,814.037,168 ST4000N[...]

C ONSTELLATION ES.3 S ERIAL ATA P RODUCT M ANUAL , R EV . A 39 B IT W ORD 88 0 Ultra DMA mode 0 is supported. 1 Ultra DMA mode 1 is supported. 2 Ultra DMA mode 2 is supported. 3 Ultra DMA mode 3 is supported. 4 Ultra DMA mode 4 is supported. 5 Ultra DMA mode 5 is supported. 6 Ultra DMA mode 6 is supported. 8 Ultra DMA mode 0 is currently active. 9 [...]

40 C ONSTELLATION ES.3 S ERIAL ATA P RODUCT M ANUAL , R EV . A 6.3.2 Set Features command This command controls the implementation of various features that the drive supports. When the drive receives this command, it sets BSY, checks the contents of the Features register, clears BSY and generates an interrupt. If the value in the register does not [...]

C ONSTELLATION ES.3 S ERIAL ATA P RODUCT M ANUAL , R EV . A 41 6.3.3 S.M.A.R.T. commands S.M.A.R.T. provides near-term failure prediction for disk drives. When S.M.A.R.T. is enabled, the drive monitors predetermined drive attributes that are susceptible to degradation over time. If sel f-monitoring determines that a failure is likely, S.M.A.R.T. ma[...]

42 C ONSTELLATION ES.3 S ERIAL ATA P RODUCT M ANUAL , R EV . A[...]

C ONSTELLATION ES.3 S ERIAL ATA P RODUCT M ANUAL , R EV . A 43 I NDEX A ACA 23 acoustics 21 Active 17 Active mode 17 actuator arm 8 Admin SP 30 AES-256 data encryption 30 Agency certification 23 altitude 20 ambient 20 ambient temperature 8 Annualized Failure Rate (AFR) 22 areal density 3 , 7 ATA commands 34 Australia/New Zealand Standard AS/NZ CISP[...]

44 C ONSTELLATION ES.3 S ERIAL ATA P RODUCT M ANUAL , R EV . A I I/O data-transfer rate 7 Identify Device 34 Identify Device command 36 Idle 17 , 34 Idle Immediate 34 Idle mode 8 , 17 Information Technology Equipment (ITE) 23 Input noise ripple 17 input voltage 8 interface 7 , 33 interference 23 internal data-transfer rate OD 7 ISO document 7779 21[...]

C ONSTELLATION ES.3 S ERIAL ATA P RODUCT M ANUAL , R EV . A 45 I NDEX relative humidity 20 Reliability 22 Request Sense Data Ext 34 RF 22 RMS read/write current 17 RNG 30 RoHS 24 RRL 23 S S.M.A.R.T. Disable Operations 35 S.M.A.R.T. Enable Operations 35 S.M.A.R.T. Enable/Disable Autosave 35 S.M.A.R.T. Execute Offline 35 S.M.A.R.T. implementation 34 [...]

46 C ONSTELLATION ES.3 S ERIAL ATA P RODUCT M ANUAL , R EV . A[...]

[...]

Seagate Technology LLC AMERICAS Seagate Technology LLC 10200 South De Anza Boulevard, Cupertino, California 95014, United States, 408-658-1000 ASIA/PACIFIC Seagate Singapore International Headquarters Pte. Ltd. 7000 Ang Mo Kio Avenue 5, Singapore 569877, 65-6485-3888 EUROPE, MIDDLE EAST AND AFRICA Seagate Technology SAS 16-18 rue du Dôme, 92100 Bo[...]