Sears EXPANSE 1000 831.297451 manual

%f O0 0-10 MPH _ 2.0 HP _ PROGRAMMABLE SPEED/INCLINE Model No. 831.297451 - Serial No. ® The serial number can be found in the location shown below. Write the serial number in the space above. Serial Number Decal _kCAUTION!: Read all safety precautions and instructions in this manual before using this equipment. Keep this manual in a safe place fo[...]

FULL 90 DAY WARRANTY For 90 days from the date of purchase, when proper assembly and maintenance procedures detailed in the Owner's Manual are followed, SEARS will, free of charge, repair or replace and install a replacement part for any defective part, when this treadmill is used in a normal manner. This warranty does not apply when this trea[...]

O0 0-10 MPH o_ 2.0 HP _ PROGRAMMABLE SPEED/INCLINE TABLE OF CONTENTS IMPORTANT SAFETY PRECAUTIONS ......................................................... 4 BEFORE YOU BEGIN ...................................................................... 5 ASSEMBLY .............................................................................. 6 OPERATION AN[...]

IMPORTANT SAFETY PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock or injury to persons, read the fol- lowing important safety precautions and information before operating the treadmill. 1. Position the treadmill on a level surface, with at least 8 feet of clearance behind the treadmill. Do not place the treadmill near water, o[...]

BEFORE YOU BEGIN Thank you for selecting the SEARS LIFESTYLER ® EXPANSE 1000 treadmill. The EXPANSE 1000 treadmill blends advanced technology with innovative design to let you enjoy an excellent form of cardiovascular exercise in the convenience and privacy of your home. For your safety and benefit, read this manual carefully before uslng the trea[...]

ASSEMBLY Complete the assembly steps withthe help of a second person. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. THE FOLLOWING TOOLS ARE REQUIRED FOR ASSEMBLY: The 7/32" allen wrench _ included and your own adjustable wrench o With the help of a sec[...]

OPERATION AND ADJUSTMENT PLUGGING IN THE POWER CORD This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. Plug the power cord int[...]

CONSOLE OPERATION The heart of the treadmill is the state-of-the-art programmable console. The console offers both manual and pro- gram modes, and features four independent LCD displays to provide you with continuous exercise feedback. Please read these instructions carefully before operating the console. Note: if there is a sheet of clear protec- [...]

PROGRAM MODE OPERATION When the console is in the program mode, the console will automatically control either the speed of the walking belt or the incline of the treadmill, according to programs you create. To create a program, first press the MODE button repeatedly to select the WALK, RUN or INCLINE mode. An indicator will light to show which mode[...]

SPEED display--This display shows the current speed of the walking belt. PULSE display--This display shows your heart rate. To use the pulse display, first stand on the foot rails and place your thumb on the pulse sensor as shown. The pulse sensor is pressure-activated. Fully press down the sensor. Do not press too hard, or the circulation in your [...]

TROUBLE-SHOOTING AND STORAGE Most treadmill problems can be solved by following the simple steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, call our Customer Service Department toll-free at 1- 800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time. 1. SYMPTOM: THE POWER DOES N[...]

c. If the walking belt still slows when walked on, please call our Customer Service Department. 5, SYMPTOM: THE WALKING BELT IS OFF-CENTER OR SLIPS WHEN WALKED ON a. If the walking belt has shifted to the left, first remove the safety key and UNPLUG THE POWER CORD. Using the 3/16" allen wrench, turn the left rear roller adjustment bolt clockwi[...]

CONDITIONING GUIDELINES The following guidelines will help you to plan your exercise program. Remember that proper nutrition and ade- quate rest are essential for successful results. , WAR N IN G: Before beginning this or any exercise program, consult your physician. This is especially important for individuals over the age of 35 or individuals wit[...]

PART LIST--Model No. 831.297451 R1094A Key Part Key Part No, No. Qty. Description No. No. Qty. Description 1 119994 2 Handrail Bolt 53 102955 1 Optic Switch 2 119793 1 Front Safety Cover 54 110407 1 Rear Leg Pad 3 120298 1 Left Upright 55 013028 4 Endcap Screw 4 014086 3 Black Flat Washer 56 116601 1 Right Rear Endcap 5 114005 2 Handrail Endcap 57 [...]

EXPLODED DRAWING--Model No. 831.297451 mo94A 9 13 71 10 69 1 76 5 85 1: 14 22 26 15 29 86_. 37 74 36 78 80 16 17 88 87 19 20., 89 i. o, 82 70 / 66 90 81 2 15 15[...]

ORDERING REPLACEMENT PARTS Each TREADMILL has its own MODEL NUMBER. Always mention this MODEL NUMBER when requesting ser- vice or repair parts for your TREADMILL. All parts listed herein can be ordered through SEARS, ROEBUCK AND CO. SERVICE CENTERS and most SEARS RETAIL STORES. If parts you need are not stocked locally, your order will be transmitt[...]