Sennheiser MB Pro 1 manual

Professional Bluetooth solutions MB Pro 1 MB Pro 2 Instruction manual[...]

MB Pro1 | MB Pro 2 | 1 Contents Contents Important safety information ...................................................................................2 Introduction..................................................................................................................3 Pack age contents .................................................[...]

2 | MB Pro1 | MB Pro 2 Important safety information Important safety information X Please read this instruction manual carefully and com- pletely before using the product. X Always include this instruction manual when passing the product on to third parties. X Do not use an obviously defective product. Preventing damage to health and accidents X Do[...]

MB Pro1 | MB Pro 2 | 3 Introduction Introduction The comfortable new MB Pro 1 and Pro 2 Bluetooth headsets are the wireless solution for phone calls with mobile phones and sof tphones with superb sound quality. The ultra noise cancelling microphone integrated into the headset filters away background noise, thus providing ultimate speech intelligibi[...]

4 | MB Pro1 | MB Pro 2 Pack age contents P ackage contents The products of the MB Pro 1 and MB Pro 2 series are available for different areas of application. The products marked with ML in their name are optimized for Microsof t® Lync™. Pack age contents MB Pro 1/MB Pro 2 Quick Guide Safety Guide Headset charger CH 20 MB USB MB Pro 1 MB Pro 2 or[...]

MB Pro1 | MB Pro 2 | 5 Product overview Product overview Overview of headsets MB Pro 1 MB Pro 2 4 8 7 6 5 9 2 4 3 3 1 2 1 1 Windshield 2 Microphone 3 Battery compartment 4 Ear pad 5 Name plate 6 Headset LED 7 Multi-function button 8 Audio button 9 Charging contacts[...]

6 | MB Pro1 | MB Pro 2 Product overview Overview of the headset chargers 1 2 1 3 3 CH 20 MB CH 20 MB USB 1 Magnetic holder with charging contacts 2 Headset stand/ USB cable holder 3 USB plug Overview of the BTD 800 USB dongle 1 2 3 1 USB plug 2 Link LED 3 Link button Overview of pictograms Meaning of the pictograms for pressing a button Pictogram M[...]

MB Pro1 | MB Pro 2 | 7 Product overview Overview of the LED indications Meaning during operation LED Meaning Headset switches on Headset switches off Headset/USB dongle is in pairing mode Pairing was successful Pairing has failed or has been cancelled 2s 2s Connectable state, not connected Once the headset is successfully connected, the LED goes of[...]

8 | MB Pro1 | MB Pro 2 Product overview Overview of buttons Multi-function button Press the button Function Page Accepts/ends a call Accepts an incoming call and ends the active call (managing two calls) Cancels redialing Ends the active call and makes the call on hold active (managing two calls) Retrieves information on the remaining talk time T r[...]

MB Pro1 | MB Pro 2 | 9 Product overview Audio button: V olume adjustment Move the button Function Page During an active call: Increases/reduces the speaker volume During music reproduction: Increases/reduces the audio volume In idle mode (no active call or music reproduction): Increases/reduces the volume for the ring tone, the beeps and the voice [...]

10 | MB Pro1 | MB Pro 2 Putting the headset into operation Putting the headset into operation Charging the headset battery A complete charging cycle takes about 2 hours and 30 minutes. Before using the headset for the first time, charge the rechargeable battery for a complete charging cycle without interruption. 1. T ake off the headset and switch [...]

MB Pro1 | MB Pro 2 | 11 Putting the headset into operation Battery level indicator displayed on Apple iPhone When the headset is paired with an iPhone, the iPhone screen shows an addi- tional battery level indicator for the headset. P airing the headset with Bluetooth devices CAUTION Danger of malfunction! The transmitted radio waves of mobile phon[...]

12 | MB Pro1 | MB Pro 2 Putting the headset into operation Pairing the headset with a Bluetooth device The following chapter describes, by way of example of a mobile phone, how to pair the headset with a Bluetooth device. In case of deviation, proceed as de- scribed in the instruction manual of your mobile phone. 1. Switch the headset off (see page[...]

MB Pro1 | MB Pro 2 | 13 Using the headset Using the headset Individually adjusting the headset and wearing it 1. Rotate the microphone boom. 2. Bend the microphone boom so that the microphone is about 0.8” (2 cm) from the corner of your mouth. 3. Adjust the headset so that the – MB Pro1: ear pad rests comfortably on your right or lef t ear. –[...]

14 | MB Pro1 | MB Pro 2 Using the headset Switching the headset on and connecting it X Press the multi-function button for 2 seconds or take the headset from the magnetic holder or the charging cable. The voice prompt “Power on” is announced in the headset. The LED flashes 3 times blue every 2 seconds until the headset finds a paired Bluetooth [...]

MB Pro1 | MB Pro 2 | 15 Using the headset Activating/deactivating the voice prompts 1. Switch the headset on (see page 14). 2. Simultaneously press and hold the headset‘s multi-function button and Audio button for 5 seconds. The voice prompts are now activated/deactivated and the voice prompt “V oice on” or “V oice off” is announced in th[...]

16 | MB Pro1 | MB Pro 2 Using the headset Changing the volume CAUTION Hearing damage due to high volumes! Listening at high volume levels for long periods can lead to permanent hearing defects. X Set the volume to a low level before putting on the headset. X Do not continuously expose yourself to high volumes. You can adjust three independent volum[...]

MB Pro1 | MB Pro 2 | 17 Using the headset Making calls using the headset Making a call X Dial the desired number on your mobile phone or sof tphone. You hear a beep in the headset. If your mobile phone does not automatically transfer the call to the headset: X Press the multi-function button on the headset or press a corresponding button on your mo[...]

18 | MB Pro1 | MB Pro 2 Using the headset T ransfering the call to/from the headset Once a connection is established, you can transfer the call to/from the headset. X Press the multi-function button: Duration Function Beeps 1 s Transfers a call from the headset to the mobile phone T ransfers a call from the mobile phone to the headset Redialing The[...]

MB Pro1 | MB Pro 2 | 19 Using the headset Muting the headset’s microphone X Press the Audio button. The headset‘s microphone is muted. During the muting, the Link LED flashes red. Duration Function V oice prompt Mutes the headset’s microphone ”Mute on“ Unmutes the headset’s microphone ”Mute off“ Managing multiple calls You can use t[...]

20 | MB Pro1 | MB Pro 2 Using the headset Restoring factory default settings (Reset) 1. Switch the headset off (see page 14). 2. Keep the multi-function button pressed until the LED alternately flashes blue and red. 3. Simultaneously press and hold the headset‘s multi-function button and Audio button for 5 seconds. The LED flashes 3 times purple [...]

MB Pro1 | MB Pro 2 | 21 Cleaning and maintaining the headset Cleaning and maintaining the headset CAUTION Liquids can damage the electronics of the product! Liquids entering the housing of the device can cause a short circuit and damage the electronics. X Keep all liquids far away from the product. X Do not use any cleansing agents or solvents. Cle[...]

22 | MB Pro1 | MB Pro 2 Cleaning and maintaining the headset Replacing the headset’s rechargeable battery CAUTION Damage to the product due to improper handling! The cables can be kinked or damaged if you open the battery compartment too jerkily. X Carefully open the battery compartment and loosen the connector plug of the rechargeable battery. S[...]

MB Pro1 | MB Pro 2 | 23 Cleaning and maintaining the headset Replacing the rechargeable battery of the MB Pro 2 headset 1. Carefully remove the ear pad from the ear cup where the battery compartment is located. 2. Open the battery compartment. 1 2 1 2 3. Remove the rechargeable battery and carefully loosen the connector plug of the rechargeable bat[...]

24 | MB Pro1 | MB Pro 2 Cleaning and maintaining the headset Updating the sof tware of the product You can update the sof tware of your headset and Bluetooth dongle by using the free “Sennheiser Updater” PC sof tware. X Download the “Sennheiser Updater” from www.sennheiser.com/cco/sof tware. X Install the PC sof tware. T o install the sof t[...]

MB Pro1 | MB Pro 2 | 25 Cleaning and maintaining the headset Updating the sof tware of the Bluetooth USB dongle 1. Plug the Bluetooth USB dongle into the USB port of your PC. 2. Start the “Sennheiser Updater”. The “Sennheiser Updater” compares the installed firmware version of the Bluetooth USB dongle to the latest firmware version availabl[...]

26 | MB Pro1 | MB Pro 2 If a problem occurs ... If a problem occurs ... Problem Possible cause Solution Page Headset cannot be switched on The rechargeable battery is flat Recharge the rechargeable battery. 10 No audio signal The headset is not paired with the mobile phone Check if the headset is paired. If necessary, pair the headset again. 11 The[...]

MB Pro1 | MB Pro 2 | 27 Specifications Specifications MB Pro 1 | MB Pro 2 Dimensions (W x H x D) 170 x 175 x 55 mm W eight MB Pro 1: approx. 64 g MB Pro 2: approx. 83 g Standby time up to 19 days T alk time up to 15 hours Charging time of rechargeable battery 2 hours 30 minutes Rechargeable battery (built-in) Lithium Polymer; 3.7 V; 205 mA Speaker [...]

28 | MB Pro1 | MB Pro 2 Manufacturer Declarations Manufacturer Declarations W arranty Sennheiser Communications A/S gives a warranty of 24 months on this product. For the current warranty conditions, please visit our website at www.sennheiser. com or contact your Sennheiser partner. Sennheiser product warranty FOR AUSTRALIA ONL Y In Sennheiser’s [...]

Sennheiser Communications A/S Industriparken 27, DK-2750 Ballerup, Denmark www.sennheiser.com Publ. 0 4 /14, A0 2[...]