Ir para a página of
Manuais similares
-
Lawn Mower
Servis-Rhino AGM52
186 páginas 30.53 mb -
Lawn Mower
Servis-Rhino 14812
72 páginas 2.64 mb -
Lawn Mower
Servis-Rhino ROTARY MOWER SE4
21 páginas 0.95 mb -
Lawn Mower
Servis-Rhino AGM72
186 páginas 30.53 mb -
Lawn Mower
Servis-Rhino RHINO EC72
144 páginas 26.3 mb -
Lawn Mower
Servis-Rhino TURBO120
202 páginas 25.45 mb -
Lawn Mower
Servis-Rhino DM82
106 páginas 9.05 mb -
Lawn Mower
Servis-Rhino DM95
106 páginas 9.05 mb
Bom manual de uso
As regras impõem ao revendedor a obrigação de fornecer ao comprador o manual com o produto Servis-Rhino TURBO120. A falta de manual ou informações incorretas fornecidas ao consumidor são a base de uma queixa por não conformidade do produto com o contrato. De acordo com a lei, pode anexar o manual em uma outra forma de que em papel, o que é frequentemente utilizado, anexando uma forma gráfica ou manual electrónicoServis-Rhino TURBO120 vídeos instrutivos para os usuários. A condição é uma forma legível e compreensível.
O que é a instrução?
A palavra vem do latim "Instructio" ou instruir. Portanto, no manual Servis-Rhino TURBO120 você pode encontrar uma descrição das fases do processo. O objetivo do manual é instruir, facilitar o arranque, a utilização do equipamento ou a execução de determinadas tarefas. O manual é uma coleção de informações sobre o objeto / serviço, um guia.
Infelizmente, pequenos usuários tomam o tempo para ler o manual Servis-Rhino TURBO120, e um bom manual não só permite conhecer uma série de funcionalidades adicionais do dispositivo, mas evita a formação da maioria das falhas.
Então, o que deve conter o manual perfeito?
Primeiro, o manual Servis-Rhino TURBO120 deve conte:
- dados técnicos do dispositivo Servis-Rhino TURBO120
- nome do fabricante e ano de fabricação do dispositivo Servis-Rhino TURBO120
- instruções de utilização, regulação e manutenção do dispositivo Servis-Rhino TURBO120
- sinais de segurança e certificados que comprovam a conformidade com as normas pertinentes
Por que você não ler manuais?
Normalmente, isso é devido à falta de tempo e à certeza quanto à funcionalidade específica do dispositivo adquirido. Infelizmente, a mesma ligação e o arranque Servis-Rhino TURBO120 não são suficientes. O manual contém uma série de orientações sobre funcionalidades específicas, a segurança, os métodos de manutenção (mesmo sobre produtos que devem ser usados), possíveis defeitos Servis-Rhino TURBO120 e formas de resolver problemas comuns durante o uso. No final, no manual podemos encontrar as coordenadas do serviço Servis-Rhino na ausência da eficácia das soluções propostas. Atualmente, muito apreciados são manuais na forma de animações interessantes e vídeos de instrução que de uma forma melhor do que o o folheto falam ao usuário. Este tipo de manual é a chance que o usuário percorrer todo o vídeo instrutivo, sem ignorar especificações e descrições técnicas complicadas Servis-Rhino TURBO120, como para a versão papel.
Por que ler manuais?
Primeiro de tudo, contem a resposta sobre a construção, as possibilidades do dispositivo Servis-Rhino TURBO120, uso dos acessórios individuais e uma gama de informações para desfrutar plenamente todos os recursos e facilidades.
Após a compra bem sucedida de um equipamento / dispositivo, é bom ter um momento para se familiarizar com cada parte do manual Servis-Rhino TURBO120. Atualmente, são cuidadosamente preparados e traduzidos para sejam não só compreensíveis para os usuários, mas para cumprir a sua função básica de informação
Índice do manual
-
Página 1
©201 1 Alamo Group Inc. Published 01/1 1 Part NO. 00778487C OPERA T OR’S MANUAL RHINO ® 1020 S. Sangamon A ve. Gibson City , IL 60936 800-446-5158 Email: parts@servis-rhino.com This Operator' s Manual is an integral p art of the safe operation of this machine and must be maint ained with the un it at all times. READ, UNDERST AND, and FOLLO[...]
-
Página 2
T o the Owner/Operator/Dealer This Operator's Manual is an integral p art of the safe operation o f this machine and must be maint ained with the implement at a ll times. A Ma nual canister is provided on the implement where this manu al can be properly stored. If you lose or damage this ma nual a free replacement manual ca n be obtained from [...]
-
Página 3
In order to r educe accidents and enhance the safe o peration of mowers, Alamo Group Ag Division, in cooperation with other industr y manufacturers has develope d the AEM/FEMA Industrial and Ag ricultural Mower Safety Practices video an d guide book. The video will familiarize and instruct mower-tractor operators in safe practices when using indust[...]
-
Página 4
Alamo Group Ag. Division will provide one (1) AEM Mower Safety Practices Vi deo Please Send Me: VHS Format – AEM/FE MA Mower Operator Safety V ideo DVD Format – AEM/FEMA Mower Operator Safety V ideo Mower Operator ’ s Manual AEM Mower Operator ’ s Safety Manual Requester Name Phone: Requester Address: City S tate Zip Code Mower Model: Seria[...]
-
Página 5
DEALER to CUST OMER Pre-Delivery/ Operation Instructions Dealer should inform the Purchase r of this product of W arranty term s, provisio ns, and proc edures that are applicable. Dealer should in form Purchaser to review the content s of the Operator’s Manual including safety equipment, safe operation and maintenance, to review the Safety Signs [...]
-
Página 6
[...]
-
Página 7
T able of Content s SAFETY SECTION ........ ................................................. .................................................... 1-1 GENERAL SA FETY INSTRUCTIONS A ND PRACTICES ........... ................. ................ ................ ................ .... 1-2 OPERATOR SAFETY ............... ................ ................[...]
-
Página 8
Front End Weight ......................... ................ ................ ................ ................. ................ .... ............... ................ . 4-6 Power Take Off (PTO) . ................ ................ ... ............. ................ ................. ............ ............ ........... ................ . 4-7 Tire S[...]
-
Página 9
Blade Bolt Inspection ...... ................ ................ ................ ............. ................. ................ ..... ................. ............ 5-16 BLADE CARRIER REMOVAL ..................... ................ ................ ................. ................ ................ ... ............... 5-17 BLADE CARRIER INSPECTION[...]
-
Página 10
[...]
-
Página 11
Safety Section 1-1 © 201 1 Alamo Group Inc. SAFETY SECTION[...]
-
Página 12
SAFETY Turbo 120 01/11 Safety Section 1-2 © 201 1 Alamo Group Inc. SAFETY GENERAL SAFETY INSTRU CTIONS AND PRACTICES A careful oper ator is the best operator . Safety is of primary import ance to the manufacturer a nd should be to the owner/operator . Most accidents can be avoided by be ing aware of your equipment, your sur roundings, and observin[...]
-
Página 13
SAFETY Turbo 120 01/11 Safety Section 1-3 © 201 1 A lamo Group Inc. SAFETY OPERA TOR SAFETY TO A VOID SERIOUS IN JUR Y OR DEA TH DO THE FOLLOWING: • READ, UNDERST AND and FOLLOW Operator's Manual instructions, W arnings and Safety Messages. • WEAR SAFETY GLASSES , safety shoes, hard hat, hearing prot ection and gloves when opera ting or r[...]
-
Página 14
SAFETY Turbo 120 01/11 Safety Section 1-4 © 201 1 Alamo Group Inc. SAFETY CONNECTION OR DISCONNE CTING IMPLEMENT SAFETY TO A VOID SERIOUS INJURY OR DEA TH FROM BEING CRUSHED BY TRACTOR OR IMPLEMENT : WHEN BACKING tractor to imple ment hitch: • DO NOT ALLOW BYST ANDERS between tractor and implement BEFORE connecting an d disconnecting imp lement [...]
-
Página 15
SAFETY Turbo 120 01/11 Safety Section 1-5 © 201 1 A lamo Group Inc. SAFETY CRUSHING HAZARDS TO A VOID SER IOUS INJURY OR DEA TH FROM F ALLING OFF T RACTOR, EQUIPMENT RUN OVER, ROLLOVER AND CRUSHING BY F ALLING WING OR IMPLEMENT : • USE ROPS and SEA T BEL T equipped tractors for mowing operations. • KEEP ROPS lock in up position. • AL W A YS [...]
-
Página 16
SAFETY Turbo 120 01/11 Safety Section 1-6 © 201 1 Alamo Group Inc. SAFETY THROWN OBJECTS HAZARDS ROT ARY MOWERS CAN THROW OBJECTS 300 FEET OR MORE UNDER ADVERSE CONDITIONS. TO A VOID SERIOUS INJUR Y OR DEA TH T O OPERA T OR OR BYST ANDERS FROM THROWN OBJECTS: • KEEP bystanders 300 feet away STOP MOWING IF P ASSERSBY ARE WITHIN 300 FEET UNLESS: ?[...]
-
Página 17
SAFETY Turbo 120 01/11 Safety Section 1-7 © 201 1 A lamo Group Inc. SAFETY THROWN OBJECTS HA ZARDS (CONTINUED) MOWER OPERA TION: • DO NOT exceed mower' s rated Cutting Capacity or cut non- vegetative material. • USE ENCLOSED TRACTOR CABS when two or more mowers ar e operating in mowing area. • ADJUST mower sections or wing close and p a[...]
-
Página 18
SAFETY Turbo 120 01/11 Safety Section 1-8 © 201 1 Alamo Group Inc. SAFETY RUN OVER HAZARDS TO A VOID SERIOUS INJUR Y OR DEA TH FROM F ALLIN G OFF TRACTOR OR EQUIPMENT RUN OVER: • USE ROPS and SEA T BEL T equipped tractors for mowing operations. • KEEP ROPS locked in UP position. • ONL Y star t tractor while seated in tractor seat. • AL W A[...]
-
Página 19
SAFETY Turbo 120 01/11 Safety Section 1-9 © 201 1 A lamo Group Inc. SAFETY PTO ENT ANGLEMENT HAZARDS KEEP A W A Y FROM ROT A TING DRIVELINES AND ELEMENTS TO A VOID SERIOUS INJUR Y OR DEA TH: S T AY AW AY and KEEP hands, feet and body A W A Y from rotating blad es, drivelines and p arts until all movin g element s have stopped. • STOP , LOOK and [...]
-
Página 20
SAFETY Turbo 120 01/11 Safety Section 1-10 © 201 1 Alamo Group Inc. SAFETY MOWER BLADE CONT ACT HAZARDS KEEP A W A Y FROM ROT A TING BLADES TO A VOID SERIOUS INJUR Y OR DEA TH FROM BLADE CONT ACT : • S T AY AW AY and KEEP HANDS, FEET and BODY A W A Y from rotating blades, drivelines and part s until all moving elements have stopped. • DO NOT p[...]
-
Página 21
SAFETY Turbo 120 01/11 Safety Section 1-11 © 201 1 A lamo Group Inc. SAFETY HIGH PRESSURE OIL LEAK HAZARDS TO A VOID SERIOUS INJUR Y OR DEA TH FROM HIGH PRESSURE HYDRAULIC OIL LEAKS PENERA TING SKIN: • DO NOT OPERA TE equipment with oi l or fuel leaks. • KEEP all hydraulic hoses, lines and connection s in GOOD CONDITION and TIGHT before applyi[...]
-
Página 22
SAFETY Turbo 120 01/11 Safety Section 1-12 © 201 1 Alamo Group Inc. SAFETY ELECTRICAL & FIRE HAZARDS TO A VOID SERIOUS INJURY OR DEA TH FROM ELECTRICAL CONT ACT WHEN WORKING AROUND ELECTRICAL POWER LI NES, GAS LINES AND UTILITY LINES : • INSPECT mowing area for overhead or underground el ectrical power lines, obstructions, gas lines, cables [...]
-
Página 23
SAFETY Turbo 120 01/11 Safety Section 1-13 © 201 1 A lamo Group Inc. SAFETY TRANSPORTING HAZARDS TO A VOID SERIOUS INJUR Y AND DEA TH WHEN TO WING OR TRANSPORTING EQUIPMENT : • KEEP transport speed BELOW 20 mph to maintain control of equipment. • REDUCE SPEED on inclines, on turns and in poor towing conditions. • DO NOT TOW with trucks or ot[...]
-
Página 24
SAFETY Turbo 120 01/11 Safety Section 1-14 © 201 1 Alamo Group Inc. SAFETY HAZARDS WITH MAINTENANCE OF IMPLEMENT A VOID SE RIOUS INJUR Y OR DEA TH FROM COMPONENT FAILURE BY KEEPING IMPLEMENT IN GOOD OPERA TING CONDITION IN PERFORMI NG PROPER SERVICE, REP AIRS AND MAINTENANCE. BEFORE PERFORMING SERVICE, REP AIRS AND MAINTENANCE ON THE IMPLEMEN T : [...]
-
Página 25
SAFETY Turbo 120 01/11 Safety Section 1-15 © 201 1 A lamo Group Inc. SAFETY PA R T S I N F O R M AT I O N PA R T S I N F O R M AT I O N Rhino mowers use bala nced and matched system compone nts for blade car riers, blades, cuttershaft s, knives, knife hangers, roll ers, drivetrain component s, and be arings. These parts are made and tested to Rhin[...]
-
Página 26
SAFETY Turbo 120 01/11 Safety Section 1-16 © 201 1 Alamo Group Inc. SAFETY Decal Location NOTE: Rhino supplies safety decals on this product to promote safe operation . Damage t o the decals m ay occur while in shipping, use, or reconditioning. Rh ino cares about the safety of it s customers, operators and bystande rs, and will replace the safety [...]
-
Página 27
SAFETY Turbo 120 01/11 Safety Section 1-17 © 201 1 A lamo Group Inc. SAFETY IITEM P ART NO. QTY LEVEL DESCRIPTION 1. D389 1 DECAL Multi Hazard 2. D629 1 INFORMA TION Lube Chart 3. D388 1 DECAL Driveline Hazards 4. 00756004 3 DANGER D/L Shield Missing. Do Not Operate 5. 00756005 2* * DANGER Rot ating D/L Entang lement 6. D137 1 INSTRUCT CCW Blade R[...]
-
Página 28
SAFETY Turbo 120 01/11 Safety Section 1-18 © 201 1 Alamo Group Inc. SAFETY handling char ges may ap ply). Contact your Rhino dealer to order rep lacement d ecals. PULL TYPE[...]
-
Página 29
SAFETY Turbo 120 01/11 Safety Section 1-19 © 201 1 A lamo Group Inc. SAFETY ITEM P ART NO. QTY LEVEL DESCRIPTION 1. D389 1 DECAL Multi Hazard 2. D390 1 DECAL Pull T ype Unit Hazards 3. D388 1 DECAL Driveline Hazards 4. 00756004 3 DANGER D/L Shield Missing. Do Not Operate 5. 00756005 2** DANGER Rotating D/L Entanglement 6. D137 1 INSTRUCT CCW Blade[...]
-
Página 30
SAFETY Turbo 120 01/11 Safety Section 1-20 © 201 1 Alamo Group Inc. SAFETY Decal Description[...]
-
Página 31
SAFETY Turbo 120 01/11 Safety Section 1-21 © 201 1 A lamo Group Inc. SAFETY[...]
-
Página 32
SAFETY Turbo 120 01/11 Safety Section 1-22 © 201 1 Alamo Group Inc. SAFETY[...]
-
Página 33
SAFETY Turbo 120 01/11 Safety Section 1-23 © 201 1 A lamo Group Inc. SAFETY[...]
-
Página 34
SAFETY Turbo 120 01/11 Safety Section 1-24 © 201 1 Alamo Group Inc. SAFETY[...]
-
Página 35
SAFETY Turbo 120 01/11 Safety Section 1-25 © 201 1 A lamo Group Inc. SAFETY[...]
-
Página 36
SAFETY Turbo 120 01/11 Safety Section 1-26 © 201 1 Alamo Group Inc. SAFETY[...]
-
Página 37
SAFETY Turbo 120 01/11 Safety Section 1-27 © 201 1 A lamo Group Inc. SAFETY[...]
-
Página 38
SAFETY Turbo 120 01/11 Safety Section 1-28 © 201 1 Alamo Group Inc. SAFETY[...]
-
Página 39
SAFETY Turbo 120 01/11 Safety Section 1-29 © 201 1 A lamo Group Inc. SAFETY Federal Laws and Re gulations This section is intended to explain in broad terms the conc ept and effect of federal laws and regulations concern ing employer and employee eq uipment operators. Thi s section is not intend ed as a legal interpretation of the law and should n[...]
-
Página 40
[...]
-
Página 41
[...]
-
Página 42
2 Contents Acknowledgment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Forewor d . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Safety Alerts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 A W ord T o The User/Operator . . . . . . . . . . . . . . . . . . . . 3 The Industrial/Agri[...]
-
Página 43
3 Safety Aler ts Symbol This Safety Alert Symbol means: “A TTENTION! ST A Y ALERT! YOUR SAFETY IS INVOL VED!” The Safety Alert Symbol identi es important safety messages on equipment, safety signs, in manuals or elsewhere. When you see this symbol, be alert to the possibility of death or personal injury . Follow instructions in the safety me[...]
-
Página 44
4 Industrial/Agricultural Mower T ypes Mowers are used for pastur e clipping, crop r esidue shredding, heavy brush cutting, waterways, right-of- ways, roadside or highway mowing. Also, these mowers are used for cutting grass and other gr owth in public areas such as parks and cemeteries. The Industrial/Agricultural Mower Sickle Bar Flail Rotary Boo[...]
-
Página 45
5 Follow A Safety Program Protect Y ourself W ear personal pr otective clothing and Personal Protective Equipment (PPE) issued to you or called for by job conditions. Y ou must AL WA YS wear safety glasses with side shields. Y ou may also need: — Hard hat — Safety shoes — Safety goggles or face shield — Heavy gloves — Hearing protection ?[...]
-
Página 46
6 Follow A Safety Program Avoid Injury Fr om Raised Equipment Avoid possible crushing injury fr om falling mower or other raised equipment. Before working near or under raised mower or equipment parts: — Securely support or block up raised mower or equipment parts according to the operator’ s manual. — Securely support, block up or lock up wi[...]
-
Página 47
7 Follow A Safety Program Be Alert! Know where to get assistance. Know how to use a rst aid kit and re extinguisher/ r e suppression system. Be Awar e! T ake advantage of training programs offer ed. Be Careful! Human error is caused by many factors: car elessness, fatigue, overload, preoccupation, unfamiliarity of operator with the machi[...]
-
Página 48
8 Follow A Safety Program Some Rules Y ou Must W ork By (continued) — Only quali ed and authorized individuals may operate this equipment. — Never allow children to play on, ride on or operate the equipment. Children ar e not quali ed to operate this equipment. — Do not allow any riders. — Use three-point contact (handholds and steps)[...]
-
Página 49
9 Prepare For Safe Operation Check The Mower And T ractor Equipment Before beginning your work day inspect the machine and have all systems in good operational condition. WARNING! Pr event possible crushing injury from falling equipment. Hydraulic system or part failure could cause unsupported equipment to fall. Do not go under raised equipment unl[...]
-
Página 50
10 Prepare For Safe Operation Know The W ork Area Before you operate the mower thor oughly inspect the work area. W alk ar ound the area and inspect the surfaces you will travel on when using the mower . Locate and avoid: — Holes — Drop-of fs — Obstacles (stumps) — Excavations — Standing water Look for debris and obstacles by walking the [...]
-
Página 51
11 Prepare For Safe Operation T ractor And Mower Contr ols Safety T est Start the tractor following the speci c pr ocedures in the manufacturer’ s operator’ s manual. These procedur es normally include: — Fasten and adjust seat belt on your ROPS-equipped tractor . — Check parking brake for engagement. — Check PTO disengagement. — Che[...]
-
Página 52
12 Prepare For Safe Operation Hitching Mower T o T ractor Three-point hitch-mounted mowers: — Refer to mower and tractor manufacturers’ manuals. — Place tractor’ s hydraulic power lift (rockshaft) selector lever in down position to avoid unexpected movement. — Explain the hitching procedur es to those operators who cannot read. — Front-[...]
-
Página 53
13 Star t Safely Make The Right Start Mow only in daylight or good arti cial light conditions. Avoid serious injury or death fr om mower -thr own objects or blade contact: — Keep chain shields, exible or solid de ector shields or dischar ge chutes in place and in good repair . — Keep bystanders at least 300 ft (92 m) from mowing opera[...]
-
Página 54
14 Operate Safely Mower -Thrown Objects (continued) Disc Mowers — When using a disc mower it is important to know the area to be mowed. If the operator has mowed the eld befor e and is familiar with all obstacles that may be present, it is suf cient to watch ahead of the mower path for any additional objects that may have entered the [...]
-
Página 55
15 Operate Safely Under Mount Mower Safety Practices When mowing with an under mount mower: — Keep removable dischar ge chute in place and over dischar ge opening. — Never stand on a mower housing when the tractor engine is operating. — Distribute grass clippings with discharge chute facing mowed area. — Before clearing a clogged mower or d[...]
-
Página 56
16 Operate Safely Wing And Side Mount Mowers Safety Practices Raised wing positions reduce shielding pr otection and increases the thr own object and blade contact hazard risks. Avoid possible serious injury or death by thr own objects or blade contact from raising and lowering wings during mowing operations: — Do not mow with bystanders within 3[...]
-
Página 57
17 Uneven T errain Mowing Safety Practices (continued) — Use extreme car e to maintain control over the equipment when operating in these conditions. — Increase tractor stability by adding wheel weights, ballast and increasing wheel spacing to maximum. Refer to operator’ s manual for recommendations. — Maintain minimum ground speed. — Mak[...]
-
Página 58
18 Parking Safety Practices — Use designated or out-of-traf c areas. — Use rm level gr ound locations. — Set parking brake. — Lower raised equipment to ground. Shut down the mower and tractor using proper equipment shut down practice before dismounting tractor . (See page 18, Pr oper Equipment Shut Down Practices. ) Sloping ground pa[...]
-
Página 59
19 Shut Down Safely Dismounting Properly — Never dismount from moving equipment. — Never jump from any machines. — Dismount carefully . — Check for slippery steps. — Keep feet and hands away from contr ols. — Use handholds and steps during dismount. — Face machine and use three-point contact (2 hands and 1 foot or 2 feet and 1 hand). [...]
-
Página 60
20 Per for m Maintenance Safely Prepar e Y ourself W ear personal pr otective clothing and Personal Protective Equipment (PPE) issued to you or called for by job conditions. Y ou must AL WA YS wear safety glasses with side shields. Y ou may also need: — Hard hat — Safety shoes — Safety glasses, goggles or face shield — Apron and gloves — [...]
-
Página 61
21 Per for m Maintenance Safely Prepar e The Machine Stored ener gy sources (electrical, mechanical, hydraulic, pneumatic, chemical, thermal, etc.) must be controlled or reduced to a practical minimum befor e performing any maintenance, repair or service pr ocedures. Safety practices to prevent potential injuries fr om energy-releasing sour ces: ?[...]
-
Página 62
22 Per for m Maintenance Safely Per for m Maintenance Safely Use Proper V entilation If it is necessary to run an engine in an enclosed area, remove the exhaust fumes fr om the area with an exhaust pipe extension. If you do not have an exhaust pipe extension, make sure you open the doors and get outside air into the area. WARNING! Pr event possible[...]
-
Página 63
23 Hydraulic System Hazards The hydraulic system is under pressur e whenever the engine is operating and may hold pressur e even after the engine is shut off. Cycle all hydraulic contr ols including the auxiliary hydraulic control after the engine is shut down. Relieve trapped pressur e in the lines after the attachments are shut down and r esting [...]
-
Página 64
24 Avoid Explosion WARNING! A void possible serious injury from explosion. Lead-acid batteries produce extr emely explosive gases especially when being char ged. Keep arcs, sparks, fl ames and lighted tobacco away . — Do not smoke near batteries. — Keep arcs, sparks and open ames away from batteries. — Provide adequate ventilation. Never[...]
-
Página 65
25 Tire And Wheel Maintenance (continued) WARNING! The types of wheels and tir es usually found on this equipment requir e special care when servicing to prevent death or serious injury . Do not in ate the tir es above the recommended pressur e. Be sure to r eplace tire ballast if equipped. See manufacturer’ s speci cations for ballast requ[...]
-
Página 66
26 Per for m Maintenance Safely Mower Blade Maintenance (continued) — How are mower blades made? Mower blades are made of high str ength alloy spring steel. They are hot-for ged and shaped to meet the manufacturer’ s individual speci cations, then heat treated and temper ed to a high strength, ductile state to reduce the possibility of br ea[...]
-
Página 67
[...]
-
Página 68
2 Este manual de seguridad está destinado a señalar algunas de las situaciones de seguridad básicas que pueden sur gir durante la operación y el mantenimiento normales de la máquina y a instruirlo en prácticas de seguridad para manejar estas condiciones. Este manual NO sustituye los manuales del operador del fabricante de la cortadora de cés[...]
-
Página 69
3 Aler tas de seguridad Símbolo Este símbolo de alerta de seguridad signi ca: “¡A TENCIÓN! ¡MANTÉNGASE ALERT A! ¡SU SEGURIDAD EST Á EN RIESGO!” El símbolo de alerta de seguridad identi ca mensajes de seguridad importantes sobre el equipo, sobr e letrer os de seguridad, en manuales u otros lugar es. Cuando vea este símbolo, mant?[...]
-
Página 70
4 Tipos de cortadora de césped industrial/para agricultura Las cortadoras de césped se usan para recortar pasturas, desmenuzar residuos de cultivos, cortar arbustos, r ealizar desbroce pesado, cortar la hierba en vías de agua, derechos de paso, costados de caminos o autopistas. Además, estas cortadoras se usan para cortar la hierba y otras plan[...]
-
Página 71
5 Cumplimiento del programa de seguridad Protéjase a sí mismo Use la ropa de pr otección personal y los equipos de protección personal (PPE) que se le pr oporcionen o que requieran las condiciones del trabajo. SIEMPRE debe usar gafas de seguridad con escudos laterales. Puede necesitar también: — Casco — Calzado de seguridad — Antiparras [...]
-
Página 72
6 Cumplimiento del programa de seguridad Evite las lesiones provocadas por equipos elevados Evite posibles lesiones de aplastamiento por caídas de la cortadora u otros equipos elevados. Antes de trabajar cerca o debajo de partes levadas de la cortadora o de los equipos: — Apoye o bloquee con seguridad las partes elevadas de la cortadora o los eq[...]
-
Página 73
7 Cumplimiento del programa de seguridad ¡Manténgase alerta! Sepa dónde obtener asistencia. Sepa cómo usar un equipo de primeros auxilios y un extintor de incendios/ sistema de supresión de fuego. ¡Manténgase informado! Aproveche los pr ogramas de capacitación que se ofrecen. ¡T enga cuidado! El error humano es causado por muchos factor es[...]
-
Página 74
8 Cumplimiento del programa de seguridad Algunas reglas que debe cumplir al trabajar (continuación) — Únicamente personas cuali cadas y autorizadas pueden manejar estos equipos. — Nunca permita que los niños jueguen en los equipos, viajen en ellos o los hagan funcionar . Los niños no están cuali cados para manejar estos equipos. — [...]
-
Página 75
9 Preparación para una operación segura Revise los equipos de la cortadora de césped y el tractor Antes de comenzar la jornada de trabajo, inspeccione la máquina y asegúrese de que todos los sistemas estén en buenas condiciones operacionales. ¡ADVERTENCIA! Evite posibles lesiones por aplastamiento producidas por equipos que caen. La falla de[...]
-
Página 76
10 Preparación para una operación segura Familiarícese con la zona de trabajo Antes de hacer funcionar la cortadora de césped, inspeccione cuidadosamente la zona de trabajo. Recorra a pie alrededor de la zona e inspeccione las super cies sobre las cuales se desplazará cuando utilice la cortadora. Busque residuos y obstáculos r ecorriendo a[...]
-
Página 77
11 Preparación para una operación segura Prueba de seguridad de los controles del tractor y de la cortadora de césped Arranque el tractor siguiendo los procedimientos especí cos del manual del operador del fabricante. Estos procedimientos normalmente incluyen: — Colóquese y ajústese el cinturón de seguridad en el tractor equipado con RO[...]
-
Página 78
12 Preparación para una operación segura Enganche de la cortadora de césped al tractor Cortadoras montadas en enganche de tres puntos: — Consulte los manuales de los fabricantes de la cortadora y del tractor . — Coloque la palanca selectora de elevación de potencia hidráulica del tractor en la posición descendida para evitar movimientos i[...]
-
Página 79
13 Arranque con seguridad Cómo realizar un arranque corr ecto Corte la hierba únicamente con luz diurna o en condiciones de buena luz arti cial. Evite lesiones graves o muerte producidas por objetos arrojados por la cortadora o por el contacto con las hojas: — Mantenga los escudos de las cadenas, los escudos de ectores exibles o sóli[...]
-
Página 80
14 Operación con seguridad Objetos arrojados por la cortadora de césped (continuación) Cortadoras de disco — Cuando se usa una cortadora de disco, es importante conocer la zona donde se va a cortar . Si el operador ha realizado cortes en el terr eno antes y está familiarizado con todos los obstáculos que puede haber , es su ciente observa[...]
-
Página 81
15 Operación con seguridad Prácticas de seguridad para la cortadora de césped de montaje inferior Cuando se traslada con una cortadora de césped de montaje inferior: — Mantenga la rampa de descarga extraíble en su lugar y por encima de la abertura de descar ga. — Nunca se pare sobr e la carcasa de una cortadora de césped cuando el motor d[...]
-
Página 82
16 Operación con seguridad Prácticas de seguridad para cortadoras de césped con laterales y montaje lateral Las posiciones elevadas de los laterales reducen la protección de los escudos y aumentan los riesgos de objetos arrojados y contacto con las hojas. Evite la posibilidad de lesiones graves o muerte por objetos arrojados o contacto con las [...]
-
Página 83
17 Prácticas de seguridad para trabajos de corte en terrenos despar ejos (continuación) — Use extremo cuidado para mantener el contr ol de los equipos cuando trabaja en estas condiciones. — Aumente la estabilidad del tractor agregando pesos o lastre en las ruedas y aumentando al máximo la separación entre las ruedas. Consulte las recomendac[...]
-
Página 84
18 Prácticas de seguridad para el estacionamiento — Use las zonas designadas o alejadas del tránsito. — Use lugares con suelo rme y nivelado. — Aplique el freno de estacionamiento. — Descienda el equipo de la cortadora de césped hasta el suelo. Apague la cortadora y el tractor usando la práctica correcta de apagado de equipos antes [...]
-
Página 85
19 Apagado con seguridad Descenso correcto — Nunca descienda de equipos en movimiento. — Nunca baje de una máquina saltando. — Descienda con cuidado. — V eri que que no haya peldaños resbaladizos. — Mantenga los pies y las manos lejos de los controles. — Use los asideros y los peldaños durante el descenso. — Enfrente la máquina[...]
-
Página 86
20 Realización de mantenimiento con seguridad Preparación personal Use la ropa de pr otección personal y los equipos de protección personal (PPE) que se le pr oporcionen o que requieran las condiciones del trabajo. SIEMPRE debe usar gafas de seguridad con escudos laterales. Puede necesitar también: — Casco — Calzado de seguridad — Anteoj[...]
-
Página 87
21 Realización de mantenimiento con seguridad Preparación de la máquina Deben controlarse o r educirse las fuentes de energía almacenada (eléctricas, mecánicas, hidráulicas, neumáticas, químicas, térmicas, etc.) al mínimo practicable antes de realizar cualquier pr ocedimiento de mantenimiento, reparación o servicio. Prácticas de seguri[...]
-
Página 88
22 Realización de mantenimiento con seguridad Use ventilación adecuada Si es necesario hacer funcionar un motor en una zona cerrada, elimine del área las emanaciones de escape con una extensión del caño de escape. Si no tiene esa extensión, asegúrese de abrir las puertas y dejar entrar aire del exterior . ¡ADVERTENCIA! Evite posibles lesion[...]
-
Página 89
23 Riesgos del sistema hidráulico El sistema hidráulico se encuentra bajo presión siempr e que el motor está funcionando; puede conservar presión incluso después de apagar el motor . Haga funcionar todos los controles hidráulicos incluyendo el contr ol hidráulico auxiliar después de que el motor esté apagado. Alivie la presión atrapada e[...]
-
Página 90
24 Evite explosiones ¡ADVERTENCIA! Evite posibles lesiones graves por explosiones. Las baterías de plomo-ácido producen gases sumamente explosivos, especialmente durante la car ga. Mantenga alejados los arcos, las chispas, las llamas y el tabaco encendido. — No fume cerca de las baterías. — Mantenga los arcos, las chispas y llamas abiertas [...]
-
Página 91
25 Mantenimiento de neumáticos y ruedas (continuación) ¡ADVERTENCIA! Los tipos de ruedas y neumáticos que generalmente se encuentran en estos equipos requier en cuidados especiales al realizar servicios para evitar lesiones graves o la muerte. No in e los neumáticos por encima de la pr esión recomendada. Asegúr ese de volver a colocar el [...]
-
Página 92
26 Realización de mantenimiento con seguridad Mantenimiento de las hojas de la cortadora (continuación) — ¿Cómo están hechas las hojas de la cortadora de césped? Están hechas acero para r esortes de aleación de alta resistencia. Se forjan en caliente y se les da forma para cumplir con las especi caciones individuales del fabricante; lu[...]
-
Página 93
Introduction Section 2-1 © 201 1 Alamo Group Inc. INTRODUCTION SECTION[...]
-
Página 94
INTRODUCTION Turbo 120 01/11 Introduction Section 2-2 © 201 1 Alamo Group Inc. INTRODUCTION We ar e pleased to have you as a Rhino customer . Y our Rotary Cutter h as been carefully designed with care and built with quality mater ials by skilled workers to give maximum service with minimum down time. This manual is provided to give you the necessa[...]
-
Página 95
INTRODUCTION Turbo 120 01/11 Introduction Section 2-3 © 201 1 Alamo Group Inc. INTRODUCTION The Rhino T urbo 120 Rotary Mower is designed for me dium duty applications such as weed, grass, corn stalks, and light brush to 3" diameter . These m owers are sing le spindle with tw o free-swingin g blades. Free swinging blades reduce the shock of i[...]
-
Página 96
INTRODUCTION Turbo 120 01/11 Introduction Section 2-4 © 201 1 Alamo Group Inc. INTRODUCTION KEY OPERA T ION POINTS • Cutting performance an d distribution are best when cu tter is level from side to side and front to rear . • In extra heavy material, rear chains will allow better discharge and better distri bution than so lid rear bands. • N[...]
-
Página 97
INTRODUCTION Turbo 120 01/11 Introduction Section 2-5 © 201 1 Alamo Group Inc. INTRODUCTION RHINO LIMITED W ARRANTY 1. LIMITED W ARRANTIES 1.01. Rhino warrants fo r one year fro m the purchas e date to the original no n-commercial, governmental, o r municipal purc haser (“Purchase r”) and warrant s for six months to the o riginal commercial or[...]
-
Página 98
[...]
-
Página 99
Assembly Section 3-1 © 201 1 Alamo Group Inc. ASSEMBL Y SECTION[...]
-
Página 100
ASSEMBLY Turbo120 01/11 Assembly Section 3-2 © 201 1 Alamo Group Inc. ASSEMBL Y DEALER SETUP INSTRUCTIONS The mower as recieved from the factory is par tially assembled and requires mini mum time to complete assembly an d is ready f or sale. This mower is shipped vertically wit h shipping bracket s. These shipping bracket s are intended fo r use i[...]
-
Página 101
ASSEMBLY Turbo120 01/11 Assembly Section 3-3 © 201 1 Alamo Group Inc. ASSEMBL Y ITEM QTY DESCRIPTION 1. 1 A-Frame - RH 2. 1 A-Frame - LH 3. 2 Brace 4. 1 Brace 5. 2 Hitch Pin 6. 1 Nut 7. 2 Bolt 8. 4 S pacer 9. 2 Nut 10. 2 Bolt 1 1. 1 Bushing 12. 1 Locknut 13. 1 Bolt 14. 3 Flatwas her 15. 1 S pacer 16. 1 Bolt 17. 2 Bolt 18. 3 Clip 19. 1 Pin 20. 1 Bu[...]
-
Página 102
ASSEMBLY Turbo120 01/11 Assembly Section 3-4 © 201 1 Alamo Group Inc. ASSEMBL Y TO N GU E Insert tongue lugs between mainframe uprights and ret ain using Bus hings & S pecial Pins. Insert Retaining Clip to S pecial Pins. Figure Asm-R-0308. AXLE ASSEMBL Y Attach the Rear Axle to the lugs o n the rear of the Mainfra me usin g (4) 3/4 x 3-1/2 bol[...]
-
Página 103
ASSEMBLY Turbo120 01/11 Assembly Section 3-5 © 201 1 Alamo Group Inc. ASSEMBL Y CONTROL RODS Attach the two le vel-lift control rods to the lo wer lugs on tongue and to lugs on the rear axle tube using pins, washers and cotter p ins. Note : The adjustin g nuts on control rods should be to rear of machine and sh ould always be a djusted with eq ual[...]
-
Página 104
ASSEMBLY Turbo120 01/11 Assembly Section 3-6 © 201 1 Alamo Group Inc. ASSEMBL Y HYDRAULIC OR MANUAL LIFT Attach the S pring Assemb ly option (Asm-R-0291) to the lug on the mower de ck behind the Center Gearbox. Retain using pin an d cotter pi n. Install the Hydraulic Cylinder (Asm-R-0291) or the ma nual Ratchet Lift Screw ( Asm-R-0292 ) 1"x2 [...]
-
Página 105
ASSEMBLY Turbo120 01/11 Assembly Section 3-7 © 201 1 Alamo Group Inc. ASSEMBL Y FRONT AND REAR DEFLECT ORS (S t andard Equip.) CHAINGUARDS (Optional Equip. at Extra Co st) Front and Rear Rubber-Fabric De flectors are S tandard Equipment and Fr ont and Rear Chainguards ar optional at extra cost. One type of guar ds must be installed (a nd maintaine[...]
-
Página 106
ASSEMBLY Turbo120 01/11 Assembly Section 3-8 © 201 1 Alamo Group Inc. ASSEMBL Y FRONT AND REAR DEFLECT ORS (S t andard Equip.) CHAINGUARDS (Optional Equip. at Extra Co st) CHAINGUARDS: Front and Rear Chainguards (Optional Equipm ent) are recommended for high er than normal usage (100 hours or more per year) and will provide pr otection from thrown[...]
-
Página 107
ASSEMBLY Turbo120 01/11 Assembly Section 3-9 © 201 1 Alamo Group Inc. ASSEMBL Y DRIVELINE A TT ACHMENT Before starting assembly , make certain that all p aint, dirt, and grease are removed from gearbox sh aft (1). T o ease assembly apply a light coa t of grease to splines and assemble. Do not asse mble a driveline without a shield. (Figure A sm-R-[...]
-
Página 108
ASSEMBLY Turbo120 01/11 Assembly Section 3-10 © 201 1 Alamo Group Inc. ASSEMBL Y SHIELD ASSEMBL Y - Side Drives - Lift and Pull Attach the Bracket s (1& 2) to the Gearbox. Install S h i e l d ( 3 ) t o b r a c k e t s ( 1 & 2 ) w i t h B o l t ( 4 ) Flatwasher s (5) and locknu t (8). Close Shield and retain with Bolt (6), Fl atwasher (5 ) [...]
-
Página 109
ASSEMBLY Turbo120 01/11 Assembly Section 3-11 © 201 1 Alamo Group Inc. ASSEMBL Y CHECK CHAINS (Extra Eq uipment) LIFT MODELS Check Chain s are available fo r attachment to the fr ont of the cutter as an accessory . Check Chains are used to control the cutting height and especially t o allow the cutter to be lowered to the same preset cutting heigh[...]
-
Página 110
ASSEMBLY Turbo120 01/11 Assembly Section 3-12 © 201 1 Alamo Group Inc. ASSEMBL Y JACKSHAFT BEARING SUPPORT ASSEMBL Y Attach Carr ier Mount Weldment (3) to deck with bolt 1/2” x 1-1/4” (12) Lockwasher (21) and Flatwasher (16) for the front two holes and use Bolt 1/2” x 1-1/2” (22 ) an d Lockwasher (21) for the rear . Then attach Bearing Ass[...]
-
Página 111
Operation Sectio n 4-1 © 201 1 A lamo Group Inc. OPERA TION SECTION[...]
-
Página 112
OPERATION Turbo 120 01/11 Operation Section 4-2 © 201 1 Alamo Group In c. OPERA TION RHINO TURBO 120 MEDIUM -DUTY ROT AR Y MOWER OPERA TION INSTRUCTIONS Rhino rotary mowers are manufactur ed with quality material by skilled wo rkers. These mowers are designed to cut grass, weed s, small brush and o ther vegetative mate rial up to 3” diameter in [...]
-
Página 113
OPERATION Turbo 120 01/11 Operation Section 4-3 © 201 1 A lamo Group Inc. OPERA TION 1. OPERA TOR REQUIREMENTS Safe operation of the unit is the responsibility of a qualifi ed operator . A qualified operator ha s read and understands th e implement and tractor Operator’s Ma nuals and is experienced in implement and tractor operation and all asso[...]
-
Página 114
OPERATION Turbo 120 01/11 Operation Section 4-4 © 201 1 Alamo Group In c. OPERA TION 2. TRACT OR REQUIREMENTS The tractor used to operate the mower must have the power cap acity to lift, pull, and oper ate the Power T ake Off ( PTO) at the mower’s rated speed while traveling at a grou nd speed between 2 and 5 MPH. Operating the mower with a trac[...]
-
Página 115
OPERATION Turbo 120 01/11 Operation Section 4-5 © 201 1 A lamo Group Inc. OPERA TION 2.3 T ractor Horsepower The power requ ired to operate a mower is determine d by the tractor PTO horsepo wer . For most mowing conditions, the TURBO 120 lift mower requires a tracto r with at least 60 HP and the semi-mount and pul l type mower require at least 50 [...]
-
Página 116
OPERATION Turbo 120 01/11 Operation Section 4-6 © 201 1 Alamo Group In c. OPERA TION 2.5 Drawbar-Pull T ype Mower For equipment operating at 540 RPM, the tractor drawbar must be po sitioned at a 14” dista nce from the hitch point to the PTO shaf t end for proper operation and min imal wear to the driveli ne. Position the drawbar at 16” if the [...]
-
Página 117
OPERATION Turbo 120 01/11 Operation Section 4-7 © 201 1 A lamo Group Inc. OPERA TION Do not connect the PT O driveline to the tractor or operate the implement unless the implement is securely connected to the tractor . 2.7 Power T ake Off (PTO) Depending on the u nit, the mower is designed to oper at e at a PTO speed of 540 or 1000 RPM. Most tra c[...]
-
Página 118
OPERATION Turbo 120 01/11 Operation Section 4-8 © 201 1 Alamo Group In c. OPERA TION 3. GETTING ON AND OFF THE TRACT OR Before getting onto the tr actor , the operator must read and completely understand the impleme nt and tractor operator manuals. If any p art of either manual is no t com pletely understood, consult an authorized dealer for a com[...]
-
Página 119
OPERATION Turbo 120 01/11 Operation Section 4-9 © 201 1 A lamo Group Inc. OPERA TION BEFORE leaving the tracto r seat lower the implement, set the p arking brake and/or set th e tractor transmission in parking gear , disengage the PTO, stop th e engine, remove the key , and wait for all movin g parts to stop. Place the tractor sh ift lever into a [...]
-
Página 120
OPERATION Turbo 120 01/11 Operation Sectio n 4-10 © 201 1 Alamo Group In c. OPERA TION 5.1 Connecting the Mower Lif t T ype and Semi-Mount T ype 1. Make sure the tractor is equip ped with the correct PTO shaf t. Change shaft s if needed. 2. Shorten or remove the tractor drawbar to avoi d interference when raising and lo wering the mower . 3. Board[...]
-
Página 121
OPERATION Turbo 120 01/11 Operation Sectio n 4-11 © 201 1 A lamo Group Inc. OPERA TION 5.2 3-Point Quick Hitch Our 3-Point Quick Hitch is designe d to connect to a Quick-Attach Couple r making mounting and dismounting your mower eas ier . The 3-Point Quic k Hitch i s also desig ned to connect the cutter t o a tractor ’s three- point linkage with[...]
-
Página 122
OPERATION Turbo 120 01/11 Operation Sectio n 4-12 © 201 1 Alamo Group In c. OPERA TION 5.4 Connecting the Mower-Pull T ype 1. Make sure the tracto r is equipped with the correct PTO shaf t and the drawbar is extended 14” from the PT O shaft end for a 540 RPM mower and 16” fo r a 1000 RPM unit. 2. Block the mower wheels in place and use the att[...]
-
Página 123
OPERATION Turbo 120 01/11 Operation Sectio n 4-13 © 201 1 A lamo Group Inc. OPERA TION 5.5 Safety T ow Chain If the mower is towed on a public roa dway , a safety ch ain with tensile strength equal to or greater than the gross weight of the mower must be connected be tween the tractor and mower . This will help control the implement in the event t[...]
-
Página 124
OPERATION Turbo 120 01/11 Operation Sectio n 4-14 © 201 1 Alamo Group In c. OPERA TION 6.1 Setting Mower Height- Lif t T ype 1. Park the tractor and mowe r on level ground. 2. Using the 3- point hitch contr ol lever , position the front of th e mower with its side skids 1 ” less off th e ground than desired cu t height. For example, for a 3” c[...]
-
Página 125
OPERATION Turbo 120 01/11 Operation Sectio n 4-15 © 201 1 A lamo Group Inc. OPERA TION 6.2 Setting Mowing Hei ght-Pull T ype and Semi-Mount T ype Mowers 1. Park the tractor and mowe r on level ground. 2. Using the ratchet jack or hydr aulic cylinder , position the mowe r so the skid shoes are 1” less of f the ground than the desir ed final cut h[...]
-
Página 126
OPERATION Turbo 120 01/11 Operation Section 4- 16 © 201 1 Alamo Group In c. OPERA TION 5.3 Setting Deck Pitch Lower Horse Power - Better Fuel Effic iency T o incr ease fuel efficiency an d lower hors epower requirement s for mower operation, the mowe r should be operat ed with the deck appro ximately 3/ 4" LOWER IN THE FRONT THAN THE REAR. Op[...]
-
Página 127
OPERATION Turbo 120 01/11 Operation Sectio n 4-17 © 201 1 A lamo Group Inc. OPERA TION 7.1 Driveline Length Check When fitting the mower to the tractor , the telescoping dr iveline must be inspected to ensure that at its most compressed position, the pr ofiles do not “bottom out”, and when at it s farthest extended position, there is sufficie [...]
-
Página 128
OPERATION Turbo 120 01/11 Operation Sectio n 4-18 © 201 1 Alamo Group In c. OPERA TION Shorten the driveline profiles as follows : • Remove the driveline from the tra ctor . • Position the mowe r (Lift and Se mi-Mount T ype - Raise and lower/ Pull T ype - T urn sharply) to the point with the sh ortest distance b etween the tractor PT O shaft a[...]
-
Página 129
OPERATION Turbo 120 01/11 Operation Sectio n 4-19 © 201 1 A lamo Group Inc. OPERA TION 7.2 Constant V elocity (CV) Driveline For mowers equipped with a Constant V elocity (CV) dr iveline, the maximum turning angle between the tractor and mower must be determined to ensure the jo int angle does not over-extend which can cause CV jo int damage. Cons[...]
-
Página 130
OPERATION Turbo 120 01/11 Operation Sectio n 4-20 © 201 1 Alamo Group In c. OPERA TION The Constant V elocity PTO driveline is HEA VY ( 70 lbs or greater) and S pecial L ifting Procedures are re commended. Use lifting a ssi stance such as mechanical assistance, two people, or proper lifting techniques when connecting or installing the driveshaf t [...]
-
Página 131
OPERATION Turbo 120 01/11 Operation Sectio n 4-21 © 201 1 A lamo Group Inc. OPERA TION 8.1 T ractor Pre-Operation Inspection/Service Refer to the tr actor operator ’s manua l to ensure a complete pre-operation inspection and scheduled service is performed accordi ng to the manufacturers recommenda tions. The following are some of the items that [...]
-
Página 132
OPERATION Turbo 120 01/11 Operation Sectio n 4-22 © 201 1 Alamo Group In c. OPERA TION • Perform scheduled lubrication as det ailed in the maintenance section. • Ensure all decals are in place and legible. • Ensure the d riveline is securely attached to tractor . Make sure the driveline yoke locking collar is securely seated in the grooves o[...]
-
Página 133
OPERATION Turbo 120 01/11 Operation Sectio n 4-23 © 201 1 A lamo Group Inc. OPERA TION • Lif t T ype-Ensure the t ailwheel beam position support bolts are proper ly installed and tightened. • Pull and Semi-Mount T ype-Ensure that the tailwheel r atchet or hydraulic cylinder is insta lled and retained correctly to pr ovide the desired cutting h[...]
-
Página 134
OPERATION Turbo 120 01/11 Operation Sectio n 4-24 © 201 1 Alamo Group In c. OPERA TION • Inspect blades a nd blade bolts for looseness and excessive wear . Make sure the mowe r is securely blocked up be fore crawling beneath. Replace damaged, worn and missing blades as complete set s to maintain rotary balance dur ing operation. • Ensure carri[...]
-
Página 135
OPERATION Turbo 120 01/11 Operation Sectio n 4-25 © 201 1 A lamo Group Inc. OPERA TION 8.3 Cutting Component Inspection Inspect blade p an and blade assembly for the following: OPS-U-0031[...]
-
Página 136
OPERATION Turbo 120 01/11 Operation Sectio n 4-26 © 201 1 Alamo Group In c. OPERA TION Operating the mower with loose blade hardware will da mage the blade hold er or blades and can result in blade b reakage or blade fastener failur e. Broken blades or bolts can be thrown out from under the mower for dist ances up to 300 feet. When the bla des are[...]
-
Página 137
OPERATION Turbo 120 01/11 Operation Sectio n 4-27 © 201 1 A lamo Group Inc. OPERA TION 8.4 Blade Bolt Inspection Inspect Blade Bolt Head da ily for wear as followed: Inspect the Blade Bolt Heads d aily for abn ormal wear . REPLACE BOTH BLADE BOL TS on the Blades IMMEDIA TEL Y if either blade bolt s has: • Visible cracks or • If the reces sed a[...]
-
Página 138
OPERATION Turbo 120 01/11 Operation Sectio n 4-28 © 201 1 Alamo Group In c. OPERA TION T r actor PRE-OPERA TIO N Inspection T ractor ID#________________ Make ____________________ Date: ________________ Shift ____________________ Before conducting the inspection, make sur e the tractor engine is off, all rotation has stopped and the tractor is in p[...]
-
Página 139
OPERATION Turbo 120 01/11 Operation Sectio n 4-29 © 201 1 A lamo Group Inc. OPERA TION Rotary Mower PRE-OPERA T ION Inspection Mower ID#________________ Make ____________________ Date: ________________ Shift ____________________ Before conducting the inspection, make sur e the tractor engine is off, all rotation has stopped and the tractor is in p[...]
-
Página 140
OPERATION Turbo 120 01/11 Operation Sectio n 4-30 © 201 1 Alamo Group In c. OPERA TION 9. DRIVING THE TRACTO R AND IMPLEMENT Safe tractor transport req uires the operator possess a thorough knowle dge of the model being operated an d precautions to t ake while driving with an att ached implem ent. Ensure the tractor has the capacity to handle the [...]
-
Página 141
OPERATION Turbo 120 01/11 Operation Sectio n 4-31 © 201 1 A lamo Group Inc. OPERA TION 9.1 St arting the T ractor The procedure to st art the tractor is model specific. Refer to the tractor operator’s manual for st arting procedures for your p articular tractor . Consult an authorized dealer if the st arting procedure is unclear . Ensure the 3-p[...]
-
Página 142
OPERATION Turbo 120 01/11 Operation Sectio n 4-32 © 201 1 Alamo Group In c. OPERA TION 9.3 Raising the Mow er Using the tractor 3-point hitch control lever-lift type or hydraulic remote lever-pull a nd semi-mount type, raise the mowe r high enough to clear all ground obst acles. When raising the mower , make sure all connection po ints are securel[...]
-
Página 143
OPERATION Turbo 120 01/11 Operation Sectio n 4-33 © 201 1 A lamo Group Inc. OPERA TION 9.5 Crossing Ditch es and Steep Inclines When crossing ditches with steep banks or going up sharp inclines, it is possibl e that the main driveline inner profile will pe netrate into the ou ter housing to its maximum depth until the assembly becomes solid (drive[...]
-
Página 144
OPERATION Turbo 120 01/11 Operation Sectio n 4-34 © 201 1 Alamo Group In c. OPERA TION Inclines and ditches should be app roached along a line which is at an an gle as shown. This type o f path will reduce the possib ility of over-collapse of the driveline and re sulting damage . If the gradient is so steep that such an approach increase s the pos[...]
-
Página 145
OPERATION Turbo 120 01/11 Operation Sectio n 4-35 © 201 1 A lamo Group Inc. OPERA TION Many varied objects, such as wire, cable, rope, or chains, can become ent angled in the operating p arts of the mower head. These items could then swing out side the housing at greater velocities than the blades. Such a situation is extremely hazardous and could[...]
-
Página 146
OPERATION Turbo 120 01/11 Operation Sectio n 4-36 © 201 1 Alamo Group In c. OPERA TION Rotary Mowers are capable un der adverse conditions of throwing objects for great distances (30 0 feet or more) and causing se rious injury or death. Follow safety messag es carefully . STOP MOWING IF P ASSERSBY AR E WITHIN 300 Feet UNLESS: -Front and Rear Defle[...]
-
Página 147
OPERATION Turbo 120 01/11 Operation Sectio n 4-37 © 201 1 A lamo Group Inc. OPERA TION 10.4 PTO RPM and Ground S peed Ground speed for mowing will depend upon the height, type , and density of vege tation to be cut. Recommended speed for ef ficient mower per formance is between 2 and 5 mph(3-8 kph). Oper ate the mower at its full rated PT O speed [...]
-
Página 148
OPERATION Turbo 120 01/11 Operation Sectio n 4-38 © 201 1 Alamo Group In c. OPERA TION Do not mow with two machines in the same ar ea except with Cab tractors with the windows closed. (SGM-1 1) Mow only in conditions where y ou have clear visibility in daylight or with adequate artificial lighting. Never mow in darkne ss or foggy cond itions where[...]
-
Página 149
OPERATION Turbo 120 01/11 Operation Sectio n 4-39 © 201 1 A lamo Group Inc. OPERA TION Do not let the Blad es turn when the Mower Deck is raised for any reason, including clearan ce or for turning. Raising the Mower deck exposes the Cutting Blades which cr eates a poten tially serious haza rd and could cause serious injury o r even death from obje[...]
-
Página 150
OPERATION Turbo 120 01/11 Operation Sectio n 4-40 © 201 1 Alamo Group In c. OPERA TION 10.6 Right of W ay (Highway) Mowing Do not mow , or drive the tractor into material that is burning, or areas that rec ently burnt and may cont ain hot spots. Burning material, spar ks, and coals could be thro wn from the mower to areas of ve getation that might[...]
-
Página 151
OPERATION Turbo 120 01/11 Operation Sectio n 4-41 © 201 1 A lamo Group Inc. OPERA TION 10.7 Shutting Down the Implement T o shut down attached mower head, first bring the tractor to a complete st op. Decrease engine RPM to idle then disenga ge cutterhead. The m ower head will come to a complete stop within a suitable amount of time. Do not engage [...]
-
Página 152
OPERATION Turbo 120 01/11 Operation Sectio n 4-42 © 201 1 Alamo Group In c. OPERA TION Always shut the T ractor completely down, pl ace the transmission in park , and set the parking brake before you or anyone else attemp t s to connect or disco nnect the Implement and T racto r hitches. (S3P T -15) Never unhitch without using the T ongue Jack. Th[...]
-
Página 153
OPERATION Turbo 120 01/11 Operation Sectio n 4-43 © 201 1 A lamo Group Inc. OPERA TION 12. MOWER STORAGE Properly prep aring and storing the mower at the en d of the season is critical to maintaining it s appearance and to help ensure years of de pendable service. The following are suggeste d storage procedures: • Thoroughly clean all debris of [...]
-
Página 154
OPERATION Turbo 120 01/11 Operation Sectio n 4-44 © 201 1 Alamo Group In c. OPERA TION Never allow children or other persons to ride on the T ractor or Implement. Falling off can result in serious injury or death. (SG-1 0) 13. TRANSPORTING THE TRACT OR AND IMPLEMENT Inherent hazards of operating the tr actor and implement and the possibilit y of a[...]
-
Página 155
OPERATION Turbo 120 01/11 Operation Sectio n 4-45 © 201 1 A lamo Group Inc. OPERA TION Before tran sporting the tractor on a p ublic roadway or boarding a trailer for tr ansport, the tractor brak e pedals should be lo cked together . Locking the pedals ensures tha t both wheels brak e simultaneou sly while stopping, especially when making an emerg[...]
-
Página 156
OPERATION Turbo 120 01/11 Operation Sectio n 4-46 © 201 1 Alamo Group In c. OPERA TION Make sure that all tr actor flashing warning lights, headlight s, and brake/tail light s are functioning properly befor e proceeding onto public roads. While newer model tractors have plenty o f lighting to provide warning signals and operating lighting, most ol[...]
-
Página 157
OPERATION Turbo 120 01/11 Operation Sectio n 4-47 © 201 1 A lamo Group Inc. OPERA TION 13.2 Hauling the T ractor and Implement Before transpor ting a loaded tractor and implement, mea sure the height and width dimensio ns and gross weight of the complete loaded unit. Ensure that the load will be in compliance with the legal limits set for the area[...]
-
Página 158
OPERATION Turbo 120 01/11 Operation Sectio n 4-48 © 201 1 Alamo Group In c. OPERA TION 14. TROUBLE SH OOTING GUIDE Problem Possible Cause Remedy Uneven Cut Excessive ground speed. Reduce ground speed . Blades worn, dull, or bent. Replace blades. (Refer to "Maintenance " section). Mower not leve l side to side. Adjust. (Refer to "Ass[...]
-
Página 159
OPERATION Turbo 120 01/11 Operation Sectio n 4-49 © 201 1 A lamo Group Inc. OPERA TION Blade Bolts W orking Loose Bolt s not tightened. T ighten Bolts to 300 f t./lbs. Bolt hole elongated or oversized. Replace Blade Carrier . Locknut worn out. Replace Locknut. Gearbox Noisy Low Lubricant. Check lubricant level. Rough gears. Run in or change Gears.[...]
-
Página 160
[...]
-
Página 161
Maintenanc e Section 5-1 ©201 1 Alamo Group MAINTENANCE SECTION[...]
-
Página 162
MAINTENANCE Turbo 120 01/11 Maintenance Section 5-2 ©201 1 Alamo Group MAINTENANCE HAZARDS WITH MAINTENANCE OF IMPLEMENT A VOID SE RIOUS INJUR Y OR DEA TH FROM COMPONENT FAILURE BY KEEPING IMPLEMENT IN GOOD OPERA TING CONDITION IN PERFORMI NG PROPER SERVICE, REP AIRS AND MAINTENANCE. BEFORE PERFORMING SERVICE, REP AIRS AND MAINTENANCE ON THE IMPLE[...]
-
Página 163
MAINTENANCE Turbo 120 01/11 Maintenance Section 5-3 ©201 1 Alamo Group MAINTENANCE Before operating your Rot ary Cutter , make sure it is properly lubricated and th oroughly inspected. Only a minimum of time and effort is requir ed to regularly lubr icate and maintain this m achine to provide long life and trouble free oper ation. Always disengage[...]
-
Página 164
MAINTENANCE Turbo 120 01/11 Maintenance Section 5-4 ©201 1 Alamo Group MAINTENANCE .[...]
-
Página 165
MAINTENANCE Turbo 120 01/11 Maintenance Section 5-5 ©201 1 Alamo Group MAINTENANCE[...]
-
Página 166
MAINTENANCE Turbo 120 01/11 Maintenance Section 5-6 ©201 1 Alamo Group MAINTENANCE[...]
-
Página 167
MAINTENANCE Turbo 120 01/11 Maintenance Section 5-7 ©201 1 Alamo Group MAINTENANCE[...]
-
Página 168
MAINTENANCE Turbo 120 01/11 Maintenance Section 5-8 ©201 1 Alamo Group MAINTENANCE GEARBOX The Gearbox has been filled with lubricant to the Dipstick level prior to shipment. Ho wever , you should check the oil level at Dipstick before operating, and fr equently thereafter . The gearbox should n ot require additional lubricant unless the box is cr[...]
-
Página 169
MAINTENANCE Turbo 120 01/11 Maintenance Section 5-9 ©201 1 Alamo Group MAINTENANCE DRIVELINES Many of the equipment compon ents are HEA VY (70 lbs or greater) and S pecial Lifting Procedures are reco mmended. Use lifting assist ance such as mechanical assist ance, two people, and proper lifting techniques when co nnecting or installing the dr ives[...]
-
Página 170
MAINTENANCE Turbo 120 01/11 M aintenance Section 5- 10 ©201 1 Alamo Group MAINTENANCE EXTENDED LUBE LEVER LOCA TION INTERV AL ACTION PUMPS Cross & Bearin gs 8 Ho urs 2 - 3 T elescoping Tube 8 Hours 6 - 8 Shield Bearings 50 Hours 1 - 2 End S pider Hub 20 Hours 1 - 2 CV Center Housing 8 Hours 12 -15[...]
-
Página 171
MAINTENANCE Turbo 120 01/11 M aintenance Section 5- 11 ©201 1 Alamo Group MAINTENANCE MAIN & JACKSHAFT DRIVELINE SHIELDS T o remove the main inner driveline shield, Remove the locking scre ws. Align the bearing tabs with the cone pockets. FIGURE Mnt-0026. Remove the half-guar d and remove the bearing ring. FIGURE Mnt-R-0012. Inspect the drivel[...]
-
Página 172
MAINTENANCE Turbo 120 01/11 M aintenance Section 5- 12 ©201 1 Alamo Group MAINTENANCE MAIN CV DRIVELINE SAFETY SHIELD (FIGURE Mnt-R-00 32) T o remove the outer CV cone, remove the locking screws from shield cone. Remove cone over yo ke. MNT-R- 0038. Remove bearing r ing and remove the lo cking sc rews from inner shield cone. Mnt-R-0038. T urn inne[...]
-
Página 173
MAINTENANCE Turbo 120 01/11 M aintenance Section 5- 13 ©201 1 Alamo Group MAINTENANCE DRIVELINE T APER CONE YOKE REMOV AL INSTRUCTIONS 1. Loosen 1 1/16” bolt end one revo lution. 2. Insert drift pun ch (max. diameter 0.375) into hole opposite the hex head and imp act with hammer . 3. Repeat operations 1 & 2. 4. Remove clamping cone from yoke[...]
-
Página 174
MAINTENANCE Turbo 120 01/11 M aintenance Section 5- 14 ©201 1 Alamo Group MAINTENANCE BLADE SER VICING Inspect blades before each use to de termine that they are properly inst alled and in good condition. Replace any blade that is bent, excessively nicke d, worn, or has any other damage. Small n icks can be ground out when sharpening . Use only or[...]
-
Página 175
MAINTENANCE Turbo 120 01/11 M aintenance Section 5- 15 ©201 1 Alamo Group MAINTENANCE BLADE SHARPENING Always sharpen both blade s at same time to maintain ba lance. Follow original sharpening pattern as shown in Mnt-R-0008. Always sharpe n blades by grinding. DO NOT heat and pound out edge. Do not sharpe n blade to a razor edge, but leave a 1/16?[...]
-
Página 176
MAINTENANCE Turbo 120 01/11 M aintenance Section 5- 16 ©201 1 Alamo Group MAINTENANCE Blade Bolt Inspection Inspect Blade Bolt Head da ily for wear as followed: Inspect the Blade Bolt Heads daily for ab normal wear . REPLACE BOTH BLADE B OL TS on the Blades IMMEDIA TEL Y if either blade bolt s has: • Visible cracks or • If the recessed ar ea o[...]
-
Página 177
MAINTENANCE Turbo 120 01/11 M aintenance Section 5- 17 ©201 1 Alamo Group MAINTENANCE BLADE CARRIER REMOV AL Remove cotter pin and loose n slotted nut on gearbox shaf t. Loosen but do not remo ve the nut until the blad e carrier is loosened. Use a suit able 2 jaw gear puller to pull carr ier off t apered gearbox shaf t. If gear puller is not avail[...]
-
Página 178
MAINTENANCE Turbo 120 01/11 M aintenance Section 5- 18 ©201 1 Alamo Group MAINTENANCE BLADE TIMING AND ROT A TION Blades on multi-spindle mower s overlap cutting pa ths to ensure a co mplete cut across the width of the mower and to compensa te for blade tip wear . If a gearbox has bee n rep aired, a blade carrier or side driveline has been removed[...]
-
Página 179
MAINTENANCE Turbo 120 01/11 M aintenance Section 5- 19 ©201 1 Alamo Group MAINTENANCE SLIP CLUTCH A slip clutch is incorporated in the PTO drive line. It is designed to slip, absorb the shock load, and protect the driveline. After the first ho ur of operation, the slip clutch should be checked for over heating. Afte r this first check, the slip cl[...]
-
Página 180
MAINTENANCE Turbo 120 01/11 M aintenance Section 5- 20 ©201 1 Alamo Group MAINTENANCE STORAGE Y our rot ary cutter represents an investment from which yo u sho uld get the greatest possible b enefit. Therefore, when the season is over , the cutter should be thoroughly checked and pr epared for storage so that a minimum amount of work will be requi[...]
-
Página 181
MAINTENANCE Turbo 120 01/11 M aintenance Section 5- 21 ©201 1 Alamo Group MAINTENANCE PROPER TORQUE FOR F ASTENERS The chart lists the correct tightening to rque for fastener s. When bolts are to be tightene d or replaced, refer to this chart to determine the grade o f bolts and the prop er torque except when specific torque values are assigned in[...]
-
Página 182
[...]
-
Página 183
SEGURIDAD Turbo 120 01/11 Sección de Seguridad 1-14 © 2011 Alamo Group Inc. SEGURIDAD INFORMACIÓN DE P ARTES NOT A: Para ver las calcomanias e n español porfavor de referirse a la pagina 1-20 en la seccion de seguridad en ingles. NOT A: Si necessita un manual comple t amente en espa ñol po r favor de ponerse en contacto a; T ranslations, direc[...]
-
Página 184
SEGURIDAD Turbo 12 0 01/11 Sección d e Seguridad 1-13 © 2011 Alamo Group Inc. SEGURIDAD RIESGOS CON EL MANTEN IMIENTO DEL IMPLEMENT O MANTENGA LOS IMPLEMENTOS EN BUENAS CONDI CIONES DE FUNCIONAMIENTO, A TRA VÉS DE UN SERVICIO, REP ARACIÓN O MANTENIMIENTO APROPIADO. ANTES DE RE ALIZAR T AREAS DE SERVICIO, REP ARACIÓN Y MANTENIMIENTO DEL IMPLEME[...]
-
Página 185
SEGURIDAD Turbo 120 01/11 Sección de Seguridad 1-12 © 2011 Alamo Group Inc. SEGURIDAD RIESGOS EN TRANSPORTE P AR A EVIT A R LESIONES GRA VES O LA MUER TE AL REMOLCAR O TR ANSPORT AR EQUIPOS: • MANTENGA la velocidad de transporte POR DEBAJ O D E 20 millas por hora p ara mantener el control del equipo. • REDUZCA LA VELOCIDAD en terreno inclinad[...]
-
Página 186
SEGURIDAD Turbo 12 0 01/11 Sección d e Seguridad 1-11 © 2011 Alamo Group Inc. SEGURIDAD RIESGOS ELÉCRTICOS Y DE FUEGO P ARA EVIT AR LESIONES GRA V ES O LA MUERTE POR CONT ACT O ELÉCTRIC O AL TRABAJAR CERCA DE CABLES ELÉCTRICOS , LÍNEAS D E GAS Y DE SERVICIOS: • INSPECCIONE el área de corte para que no interfiera con cables de aliment ació[...]
-
Página 187
SEGURIDAD Turbo 120 01/11 Sección de Seguridad 1-10 © 2011 Alamo Group Inc. SEGURIDAD RIESGO DEL CONT ACT O A LAS CUCHILLAS DE CORT ADORA RIESGO DE FIL TRACION DE ACEITE HIDRÁULICO DE AL T A PRESIÓN MANTÉNGASE LEJOS DE LAS CUCHILLAS GIRA TORIAS P ARA EVIT AR LESION ES GRA VES O LA MUERTE POR CONT ACTO CON LA CUCHILLA: • MANTÉNGASE LEJOS y N[...]
-
Página 188
SEGURIDAD Turbo 120 01/11 Sección de Seguridad 1-9 © 2011 Alamo Group Inc. SEGURIDAD RIESGO DE ENREDO POR EL PT O MANTÉNGASE ALEJADO DE LAS LÍNEAS DE CONDUCCIÓN Y OTROS ELEMENTOS GIRA TORIOS P ARA EVIT AR L ESIONES GRA VES O LA MUERTE: MANTÉNGASE LEJOS y NO ACERQUE las manos, los pies y el cuerpo a las cuchillas giratorias, líneas de conducc[...]
-
Página 189
SEGURIDAD Turbo 120 01/11 Sección de Seg uridad 1-8 © 2011 Alamo Group Inc. SEGURIDAD RIESGO DE A TROPELLO P ARA EVIT AR LESIONES GRA VES O LA MUERTE POR CAÍDA DEL TRACTOR O A TROPELLO DEL EQUIPO: • USE tractores equipados con SISTEMA ANTIVUELCO (ROPS) y CINTURONES DE SEGURIDAD para las operaciones de corte. • MANTENGA EL SISTEMA ROPS trabad[...]
-
Página 190
SEGURIDAD Turbo 120 01/11 Sección de Seguridad 1-7 © 2011 Alamo Group Inc. SEGURIDAD RIESGO DE OBJECT OS LANZADOS Continuado OPERACIÓN DE LA CO RT ADORA: • NO exceda la cap acidad de corte nominal de la cortado ra, ni corte elementos que no sean veget ación. • USE CABINAS DE TRACTOR CERRADAS cuando haya dos o más cortadoras operando en un [...]
-
Página 191
SEGURIDAD Turbo 120 01/11 Sección de Seg uridad 1-6 © 2011 Alamo Group Inc. SEGURIDAD RIESGO DE OBJECT OS LANZADOS LAS CORT ADORAS GIRA TORIAS PUEDEN ARROJAR OBJETOS A 90 METROS (300 PIES) O MÁS EN CONDICIONES ADVERSAS. P ARA EVIT AR LESIONES GR A VES O LA MUERTE AL OPER ADOR O TRANSEÚNTES COMO CO NSECUENCIA DE OBJETOS ARROJADOS: • MANTENGA a[...]
-
Página 192
SEGURIDAD Turbo 120 01/11 Sección de Seguridad 1-5 © 2011 Alamo Group Inc. SEGURIDAD RIESGO DE APLAST AMIENTO P ARA EVIT AR UNA LESIÓN GRA VE O LA MUERTE POR CAÍDA DEL TRACTOR, O EL APLAST AMIENTO, VUELCO Y APLAST AMIENTO DE UN EQUIPO POR LA CAÍDA DE UNA ALA O UN IMPLEMENTO: • USE tractores equipados con SISTEMA ANTIVUELCO (ROPS) y CINTURONE[...]
-
Página 193
SEGURIDAD Turbo 120 01/11 Sección de Seg uridad 1-4 © 2011 Alamo Group Inc. SEGURIDAD SEGURIDAD DE CONECT AR O DESCONECT AR IMPLEMENTO P ARA EVIT AR LESIONES GRA VES O LA MUERTE POR A PLAST A MIENTO POR EL TRACTOR O IMPLEMENTO: • AL DAR MARCHA A TRÁS el tractor hacia el enganche del implemento: • NO PERMIT A QUE HA Y A PERSONAS entre el trac[...]
-
Página 194
SEGURIDAD Turbo 120 01/11 Sección de Seguridad 1-3 © 2011 Alamo Group Inc. SEGURIDAD SEGURIDAD DEL OPERADOR P ARA EVIT AR LESIONES GRA VES O LA MUERTE, SIGA LAS SIGUIENTES INSTRUCCIONES: • LEA, COMPRENDA y SIGA las instrucciones del Manual del Operador , al igual que las Advertencias y Mensajes de Seguridad. • USE GAF AS DE SEGURIDAD , calzad[...]
-
Página 195
SEGURIDAD Turbo 120 01/11 Sección de Seg uridad 1-2 © 2011 Alamo Group Inc. SEGURIDAD INSTRUCCIONES DE SEGURI DAD Y PRÁCTICAS GENERALES El mejor operador es un oper ador cuidadoso. La se guridad es de import ancia fundamen tal p ara el fabrica nte, y tamb ién debería serlo p ara el propietar io u operador . La mayoría de los accidentes se pue[...]
-
Página 196
Sección de Seguridad 1-1 © 2011 Alamo Group Inc. SECCIÓN DE SEGURIDAD[...]
-
Página 197
[...]
-
Página 198
Instrucciones de operaciones antes de la entrega del DISTRIB UIDOR al CLIENTE El distribuidor deberá informar al comprad or de este pr oducto las condicione s, disposiciones y procedimientos de garantía aplicables; in formar la responsabilidad del co mprador de capacitar a sus op eradores para la operación segura; rev isar el contenido d el Manu[...]
-
Página 199
Alamo Group Ag. Division está dispue sto a suministrar un (1) Video de Prácticas de Seguridad p ara Cort adoras AEM Por favor enviar: Video de Seguridad p ara el Operador de Cort adoras AEM/FEMA – formato VHS Vide o de Seguridad para el Ope rador de Cortadora s AEM/FEMA – formato DVD Manual del Operad or de la Cortadora Manual de Seguridad de[...]
-
Página 200
A fin de reducir la tasa de accid entes y mejorar la ope ra ció n segura de las cort adoras, Alamo Grou p Ag Division se ha asociado con otros fab ricantes de la industria p ara de sarro llar el video y la guía d e Prácticas de Seguridad para Cortadoras Industria l es y Agrícolas AEM/FEMA. El video explica a los operado res de tractores y cort [...]
-
Página 201
Al propiet ario/operador/distribuidor Este Manual del Operado r es una parte esencia l de la o peración segura de est a máquina y se debe manten er con la unidad siempre. El imp lemento incluye un port a manual donde se pu ede guardar el manual de ma nera adecuada. Si el manu al se extravía o se daña, puede so licitar otra co pia sin carg o a u[...]
-
Página 202
©201 1 Alamo Group Inc. TURBO120 Publicado en 01/1 1 Parte nº. 00778487C MANUAL DE OPERADOR RHINO ® 1020 S. Sangamon A ve. Gibson City , IL 60936 800-446-5158 Email: parts@servis-rhino.com CORT ADORA/TRITURADORA GIRA T ORIA Este Manual del Operador es una parte esenc ial de la oper a ción se gu ra de es ta máqu ina y se debe mantener con la un[...]