Sharp MX-3114N manual

CONTENTS Keep this manual close at hand for reference whenever needed. ST ART GUIDE DIGIT AL FULL COLOUR MUL TIFUNCTIONAL SYSTEM MX-2314N/MX-2614N/MX-31 14N CAUTIONS __________________________________________ 3 P ART NAMES _______________________________________ 7 TURNING THE POWER ON AND OFF ____________________ 8 OPERA TION MANUALS AND HOW TO USE[...]

2 Caution! For complete electrical disconnection, pull out the main plug. The socket-outlet shall be installed near the equipment and shall be easily accessible. Shielded interface cables must be used with this equipment to maintain compliance with EMC regulations. The equipment should be installed near an accessible socket outlet for easy disconne[...]

3 CAUTIONS T o ensure safe use of the machine, this manual uses various safety symbols. The safety symbols are classified as explained below . Be sur e you understand the meaning of the symbols when reading the manual. W ARNING Indicates a risk of death or serious injury . CAUTION Indicates a risk of human injury or property damage. When removing [...]

4 Do not install the machine on an unstable or slanted surface. Install the machine on a surface that can withstand the weight of the machine. Risk of injury due to the machine falling or toppling. If peripheral devices are to be installed, do not install on an uneven floor , slanted sur face, or otherwise unstable surface. Danger of slippage, fal[...]

5 Do not place a container of water or other liquid, or a metal object that might fall inside, on the machine. If the liquid spills or the object falls into the machine, fire or electrical shock may result. Do not remove the machine casing. High-voltage parts inside the machine may cause electrical shock. Do not make any modications to this mac[...]

6 SUPPLIES Standard supplies for this pr oduct that can replaced by the user include paper , toner car tridges, and staple cartridges for the finisher . Be sure to use only SHARP-specified pr oducts for the toner car tridges, finisher staple cartridge, and transparency film. The supply of spare parts for repair of the machine is guaranteed for [...]

7 P ART NAMES Main power switch T ray 1 T ray 2 (when paper feed tray is installed)* T ray 3 (when paper feed tray is installed)* T ray 4 (when paper feed tray is installed)* Bypass tray Front cover Output tray (Centre tray) Automatic document feeder * Peripheral device. USB connector (A type) Exit tray unit (right tray)* Keyboard* [POWER] key ( ) [...]

8 TURNING THE POWER ON AND OFF This machine has two power switches. The main power switch is at the bottom left after the front cover is opened. The other power switch is the [POWER] key ( ) on the operation panel. T urning on the power (1) Switch the main power switch to the “ ” position. (2) Press the [POWER] key ( ) to turn on the power . T [...]

9 OPERA TION MANUALS AND HOW T O USE THEM The instructions for this manual are separated in the following thr ee sections. Before using the machine Start Guide: this manual This section explains precautions to ensur e safe usage, par t names and how to switch on/off the power . This section also includes important infor mation for persons that are [...]

10 SPECIFICA TIONS Basic Specications / Copier specications Name MX-2314N/MX-2614N/MX-3114N T ype Desktop Colour Full colour Copier system Laser electrostatic copier Scanning resolution Scan (B/W): 600 × 600 dpi, 600 × 400 dpi, 600 × 300 dpi Scan (full colour): 600 × 600 dpi Print: 600 × 600 dpi, equivalent to 9,600 dpi × 600 dpi Gradat[...]

11 Name Reversing Single Pass Feeder (RSPF) Document feeder types Reversing Single Pass Feeder (RSPF) Original paper sizes A3 (11" × 17") to A5 (5-1/2" × 8-1/2") Original paper types Paper weight Thin paper 35 g/m 2 (9 lbs. bond) to 49 g/m 2 (13 lbs. bond) Plain paper 50 g/m 2 (13 lbs. bond) to 128 g/m 2 (32 lbs. bond) T wo-si[...]

12 Registered paper size A3 (11" × 17") to A5 (5-1/2" × 8-1/2") T ransmission time Approx. 2 seconds * (A4 (8-1/2" × 11") Sharp standard paper , normal characters, Super G3 (JBIG)) Memory 1GB (512 MB standard for the MX-2314N) Notes T ouch dial memory Max. 1,000 entries (Including group dialling for fax, scanner , a[...]

13 INFORMA TION ON DISPOSAL Inf ormation on Disposal for User s (priv ate households) � In the European Union Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin! Used electrical and electronic equipment must be tr eated separately and in accordance with legislation that r equires proper tr eatment, recove[...]

14 T O THE ADMINISTRA T OR OF THE MA CHINE System settings pass wor d A password is necessary to change the machine’ s system settings using administrator authority . System settings can be changed from either the operation panel or using a computer web br owser . After setting up the machine, refer to [SYSTEM SETTINGS] in the Operation Guide to [...]

15 The following trademarks and register ed trademarks are used in conjunction with the machine and its peripheral devices and accessories. • Microsoft ® , Windows ® , Windows ® XP , Windows Server ® 2003, Windows Vista ® , Windows Server ® 2008, Windows ® 7, Windows ® 8, Windows Server ® 2012 and Internet Explorer ® are r egistered [...]

PRINTED IN FRANCE TINSE5144GHZZ MX-2314N/MX-2614N/MX-31 14N ST ART GUIDE[...]