Sony HSR-1 manual

Digital Surveillance Recorder 3-204-007- 12 (1) HSR-1 HSR-1P HSR-2 HSR-2P Operating Instructions  1999 Sony Corporation[...]

W ARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. THIS APPARATUS MUST BE EARTHED. Owner’s Record The model and serial numbers are located on the body of the unit. Record the serial number in the space provided below[...]

Table of Contents 1 Chapter 1 Overview Features ........................................................................... 1-1 Locations and Functions of Parts ................................. 1-5 Front Panel .......................................................................... 1-5 Rear Panel .................................................[...]

T able of Contents 2 Table of Contents Chapter 4 Menu Operations Menu Operations ............................................................ 4-1 Layered Structure of the Menu Items ................................. 4-1 Basic Display Layout .......................................................... 4-2 Keys Used for Menu Operations ................[...]

Table of Contents 3 Chapter 6 Maintenance and T roubleshooting Maintenance .................................................................... 6-1 Condensation ....................................................................... 6-1 Head Cleaning ..................................................................... 6-1 Regular Checks ..........[...]

Chapter 1 Overview Chapter 1 Overview 1-1 Chapter 1 Overview Features The HSR-1/1P/2/2P Digital Surveillance Recorder is a hybrid security recorder that records pictures from multiple surveillance video cameras with a high picture quality for long periods of time. The differences between the HSR-2/2P and the HSR-1/ 1P are described clearly in the m[...]

Chapter 1 Overview 1-2 Chapter 1 Overview Multiple Protection In case of the failure of the DV tape drive, recording operation continues on the built-in hard disk. Conversely, the HSR-1/1P/2/2P records the image data directly onto the DV tape if the hard disk fails. (In some cases, some of the data may be lost.) For additional protection, the HSR-1[...]

Chapter 1 Overview Chapter 1 Overview 1-3 Flexibility in Alarm Recording modes To capture more and even sharper images, the HSR-1/ 1P/2/2P not only changes its recording mode to the higher refresh and higher picture quality mode on alarm, but also performs interleaved recording, which accelerates the recording cycle of the camera in alarm status. I[...]

Chapter 1 Overview 1-4 Chapter 1 Overview Optional Devices HSRA-11 Input Board Up to three HSRA-11 boards can be mounted in the recorder and add four VIDEO IN connectors each. For board installation, refer to the manual for the HSRA-11. SVRM-100A Remote Control Unit The HSR-1/1P/2/2P can be controlled at hand. For details, see “Connection for rem[...]

Chapter 1 Overview Chapter 1 Overview 1-5 Locations and Functions of Parts Front Panel 5 Camera number/numeric keys Flash or light in green or amber depending on the conditions. When monitoring and playback, they function as the keys for camera selection. In menu operations or when releasing the key lock, they function as the numeric keys for enter[...]

Chapter 1 Overview 1-6 Chapter 1 Overview Locations and Functions of Parts 6 CONTROL-S (S control input) connector (stereo mini jack) By connecting a controller, such as the SVRM-100A, equipped with an S control output to this connector, tape transport on this recorder can be remotely controlled. 1 Tape transport control block 1 LOCK key and indica[...]

Chapter 1 Overview Chapter 1 Overview 1-7 3 CURSOR V / v keys Used to move within a single layer in Menu mode. While monitoring a picture, you can switch screen division configurations with these keys. 4 SET/YES key Press this key to register your menu settings. This key also functions as the YES answer key for YES/NO questions. 5 RESET/NO key In n[...]

Chapter 1 Overview 1-8 Chapter 1 Overview Locations and Functions of Parts 6 Character display Shows character data, such as the tape counter value and menu items. The tape counter value is a relative time (hours, minutes, seconds), which has the following meaning according to the mode of this recorder: In playback mode: The tape position where the[...]

Chapter 1 Overview Chapter 1 Overview 1-9 Rear Panel 1 VIDEO IN (video input) connectors (BNC type) and 75-ohm termination switches For connecting video cameras. Connectors 1 to 4 are provided as the standard inputs. Connectors 5 to 16 can be added, four additionally connectors for each optional HSRA-11 input board mounted. The termination switches[...]

Chapter 1 Overview 1-10 Chapter 1 Overview REC1 NORMAL 12 31 1999 FRI 11:59:59 AM xxxxH xx.xS SUPER ALARM ERRORxx-xxx HDD  1 XXXXXXXXXX NOT ORIGINAL ALARM Locations and Functions of Parts Screen Displays 1 Recording modes When recording or monitoring, the currently selected mode and recording mode number (REC1 to REC5) are displayed. NORMAL: Nor[...]

Chapter 1 Overview Chapter 1 Overview 1-11 8 STATUS indication The current operating mode (REC, PLAY, F FWD, REW, etc.) is displayed. 9 ALARM indication (upper) If there is either an alarm input common to all cameras or an alarm input from a certain camera to the parallel input, the indication “ALARM” is superimposed on the upper portion of the[...]

Chapter 2 Basic Operations Chapter 2 Basic Operations 2-1 Chapter 2 Basic Operations Handling Cassettes Usable Cassettes The following standard- and mini-sized cassettes of DV-format can be used with this recorder. Model name Size DV- and PDV-series, such as DV-270RM and PDV-184N Standard DVM- and PDVM-series, such as DVM-30MM and PDVM-40N Mini The[...]

Chapter 2 Basic Operations 2-2 Chapter 2 Basic Operations To prevent unintentional erasure Set the REC/SAVE switch to the SAVE position. To rerecord on a cassette Return the REC/SAVE switch to the REC position. No recording will be made on a cassette with the switch set to SAVE. Inserting a Cassette Insert/eject a cassette with the power on. Open t[...]

Chapter 2 Basic Operations Chapter 2 Basic Operations 2-3 Monitoring Picture Dividing the Screen In addition to the capability to show the picture from a specified camera on the full screen, this recorder has a multiplexer function to divide the screen into multiple divisions and permit you to view the pictures from multiple cameras at a glance. In[...]

Chapter 2 Basic Operations 2-4 Chapter 2 Basic Operations Switching the Pictures The number keys of the cameras whose pictures can be monitored flash in green. To select the picture(s) for monitoring, use the flashing camera number keys or the CURSOR V / v / B / b keys. For connections and Image Control menu operation, see Chapter 5 “Connections [...]

Chapter 2 Basic Operations Chapter 2 Basic Operations 2-5 Recording Normal Recording About the recording modes Up to five user-preset recording modes can be registered to this recorder. You may specify a set of recording requirements to each recording mode. Once the recording modes are set, the specified requirements for recording are set merely by[...]

Chapter 2 Basic Operations 2-6 Chapter 2 Basic Operations The Recording Function menu item that had been selected when you left the menu the last time is displayed in the character display on the front panel. 3 Highlight NORMAL REC (or display “RecMode”) by pressing the V or v key, then press the b key. The menu switches to the recording mode s[...]

Chapter 2 Basic Operations Chapter 2 Basic Operations 2-7 To stop recording before the end of a tape 1 Press the STOP key. A message to confirm that you want recording to stop is displayed. 2 Press the YES key. Notes • When you press the YES key, the unit starts copying the data remaining on the hard disk to the cassette tape. This operation may [...]

Chapter 2 Basic Operations 2-8 Chapter 2 Basic Operations Date/Time The date and time of recording are recorded. The camera number, date and time of recording can also be recorded as image on the tape. The data recorded as image are always be superimposed on the playback picture. Whether to record the data as image is set on the Indication Control [...]

Chapter 2 Basic Operations Chapter 2 Basic Operations 2-9 Playback Normal Playback The tape recorded on this recorder is played back in accordance with the mode set for recording. 1 Insert the recorded cassette. 2 Press the PLAY key. Playback begins. The date/time, if recorded as image, are superimposed on the playback picture. Whether to superimpo[...]

Chapter 2 Basic Operations 2-10 Chapter 2 Basic Operations Playback Search speed The maximum search speed depends on Recording mode which was specified for recording. The fewer cameras for recording, the longer the recording cycle, and the lower the image quality mode, the higher the speed at which you can monitor the playback picture. Note If you [...]

Chapter 2 Basic Operations Chapter 2 Basic Operations 2-11 2 Press the TIME SEARCH key. Search Destination Setting mode is activated. TIME SEARCH 8 15 1998 3:05: 18 PM REC END SEARCH SHIFT : Mm CHANGE : µ INPUT : NUM KEY SEARCH : SET KEY ABORT : TIME SEARCH KEY For REC END SEARCH, see “Rec End Search” on page 3-14. 3 Shifting the input posit[...]

Chapter 2 Basic Operations 2-12 Chapter 2 Basic Operations Playback During Recording (HSR-2/2P only) With the HSR-2/2P, you can play the latest recorded scene or a scene recorded before without stopping recording now in progress. You can also play a scene recorded on other cassettes. Fast-forward, rewind, time search and alarm search operations are[...]

Chapter 2 Basic Operations Chapter 2 Basic Operations 2-13 If the set value is smaller than the valid minimum value and REC is selected for PRIORITY, a Playback During Recording operation cannot be performed. For details on the setting of the recording cycle, see “Setting the Recording Modes” on page 5-12, and for the setting of PRIORITY, see ?[...]

Chapter 2 Basic Operations 2-14 Chapter 2 Basic Operations After checking the recorded picture with a Playback During Recording operation, be sure to cancel Playback During Recording mode. If you leave Playback During Recording mode activate for a long time after this operation, the recording capacity of the hard disk drive may be exhausted, and th[...]

Chapter 2 Basic Operations Chapter 2 Basic Operations 2-15 2 Press the REC key. Playback During Recording mode is canceled, and the unit is set to the ordinary recording mode. The data recorded on the hard disk during Playback During Recording operation are copied to the tape. About the continuity of recording on a tape The present tape position ma[...]

Chapter 3 Convenient Recording/Playback Functions Chapter 3 Convenient Recording/Playback Functions 3-1 Chapter 3 Convenient Recording/ Playback Functions T imer Recording You can set the recorder to start recording or change recording modes at a specified time of day. By changing recording modes, you can use different cameras for recording in diff[...]

Chapter 3 Convenient Recording/Playback Functions 3-2 Chapter 3 Convenient Recording/Playback Functions T imer Recording 3 Highlight TIMER REC by pressing the V or v key, then press the b key. The menu shifts to the selection layer of timer recording. SETUP MENU REC FUNCTION MENU TIMER REC M TIMER REC : OFF m TIMER 4 Highlight TIMER SET by pressing[...]

Chapter 3 Convenient Recording/Playback Functions Chapter 3 Convenient Recording/Playback Functions 3-3 To activate timer recording 1 Highlight TIMER REC on the display shown in step 3 on the previous page by pressing the V or v key, then press the b key. The menu shifts to timer recording selection. SETUP MENU REC FUNCTION MENU TIMER REC TIMER REC[...]

Chapter 3 Convenient Recording/Playback Functions 3-4 Chapter 3 Convenient Recording/Playback Functions is shortened. (Recording time will not change as the recording cycle for other cameras is prolonged.) Example: • Normal recording: Records camera 1 → camera 2 → camera 3 → ... camera n → camera 1, and so on. • If an alarm signal for c[...]

Chapter 3 Convenient Recording/Playback Functions Chapter 3 Convenient Recording/Playback Functions 3-5 FRAME mode When an alarm signal for a specific camera is input, the picture of the camera in alarm status is recorded only for one frame immediately after the alarm input. The recording mode for alarm recording is fixed to HYPER (the highest imag[...]

Chapter 3 Convenient Recording/Playback Functions 3-6 Chapter 3 Convenient Recording/Playback Functions 6 Specify the items required for the selected Alarm recording mode. For NORMAL/INTERLEAVE/EVENT mode: Recording mode for alarm recording and Cancel condition For PREALARM mode: Recording mode for alarm recording, Prealarm time and Cancel conditio[...]

Chapter 3 Convenient Recording/Playback Functions Chapter 3 Convenient Recording/Playback Functions 3-7 Repeat Recording You can set the recorder to record on a single cassette repeatedly. When the tape reaches its end during recording, it is automatically rewound to the beginning, and the recorder continues recording. Pictures are stored on the bu[...]

Chapter 3 Convenient Recording/Playback Functions 3-8 Chapter 3 Convenient Recording/Playback Functions Series Recording Long recording can be performed by switching multiple HSR-1/1P/2/2P units connected in series. Requirements for series recording To activate series recording, it is necessary to connect multiple HSR-1/1P/2/2P units in series and [...]

Chapter 3 Convenient Recording/Playback Functions Chapter 3 Convenient Recording/Playback Functions 3-9 Alarm Search Alarm recordings are listed in the order of generation, and you can locate the picture at the specified alarm recording. To execute Alarm search 1 Press the ALARM SEARCH key. The ALARM SEARCH display appears on the monitor screen, li[...]

Chapter 3 Convenient Recording/Playback Functions 3-10 Chapter 3 Convenient Recording/Playback Functions 2 Press the ALARM SEARCH key. 3 Using the V or v key, specify the sequential number (in order from the current tape position) of the desired alarm recording. The + mark specifies that the order is in the forward direction and the – mark in the[...]

Chapter 3 Convenient Recording/Playback Functions Chapter 3 Convenient Recording/Playback Functions 3-11 HDD Recording/Playback If no cassette is loaded, this unit performs recording/ playback using the built-in hard disk (HDD) only. To execute HDD recording 1 Remove the cassette from the unit. 2 Press the REC key. The REC indicator flashes, and re[...]

Chapter 3 Convenient Recording/Playback Functions 3-12 Chapter 3 Convenient Recording/Playback Functions The high-speed playback function permits you to check the data on the tape at a higher speed than with normal high-speed search. 1) Using this function, you can check an entire 270- minute tape in 270 minutes. To execute high-speed playback 1 In[...]

Chapter 3 Convenient Recording/Playback Functions Chapter 3 Convenient Recording/Playback Functions 3-13 Back Space Editing New recording can be restarted successively right after any desired frame. 1 Using the FRAME keys or the JOG/SHUTTLE dial on the optional SVRM-100A, locate the desired frame in Still mode. 2 Press the REC key. A message for co[...]

Chapter 3 Convenient Recording/Playback Functions 3-14 Chapter 3 Convenient Recording/Playback Functions Rec End Search You can easily locate the recording end position on a tape with this function. 1 Insert the cassette. 2 Press the TIME SEARCH key. Search Destination Setting mode is activated. TIME SEARCH 8 15 1998 3:05: 18 PM REC END SEARCH SHIF[...]

Chapter 3 Convenient Recording/Playback Functions Chapter 3 Convenient Recording/Playback Functions 3-15 Changing the Cassette During Recording Even if you need to change the cassette while recording is in progress, recording can continue uninterrupted, as the picture is stored on the built-in hard disk while you are changing the cassette. When rec[...]

Chapter 4 Menu Operations Chapter 4 Menu Operations 4-1 Menu mode enables you to make various settings. The menus are displayed on the monitor connected via the VIDEO OUT A connector or S-VIDEO connector on the rear panel. The menu items are also displayed Grade of items The menu items are classified into the following two grades: • BASIC items: [...]

Chapter 4 Menu Operations 4-2 Chapter 4 Menu Operations Menu Operations Basic Display Layout Monitor screen The item currently selected is highlighted. A flashing arrow at the far right means that the item has a subsequent layer. A flashing arrow at the far left means that the item comes after the preceding layer. The items of the lower layer are a[...]

Chapter 4 Menu Operations Chapter 4 Menu Operations 4-3 4 Highlight (or display) the item to be set by pressing the V or v key, then press the b key to move to the next layer. For the item for which the current setting is displayed on the layer in step 3 , the setting parameters are now displayed. Monitor screen SETUP MENU REC FUNCTION MENU NORMAL [...]

Chapter 4 Menu Operations 4-4 Chapter 4 Menu Operations To display the basic items only The menu is set to Enhanced grade at the factory to display both the basic and enhanced items. To display the basic items only, proceed as follows: 1 Highlight MENU GRADE (or display “Menu grade”) on the Top menu by pressing the V or v key. Monitor display S[...]

Chapter 4 Menu Operations Chapter 4 Menu Operations 4-5 Display Char. display Contents Layer 1 Layer 2 IMAGE CONTROL MENU Image Menu Menu to set the items regarding monitoring and playback. See “Image Control Menu” on page 4-6. INDICATION CONTROL MENU Indct Menu Menu to set the items regarding character data to be indicated on the screen. See ?[...]

Chapter 4 Menu Operations 4-6 Chapter 4 Menu Operations Image Control Menu Monitor screen SETUP MENU IMAGE CONTROL MENU A IMAGE B IMAGE CAMERA CONNECTION MONI DISP STRUCTURE PLAY DISP STRUCTURE The items marked with are enhanced items, which are displayed only when MENU GRADE is set to ENH on the top menu. Character display Image Menu ↓ Press the[...]

Chapter 4 Menu Operations Chapter 4 Menu Operations 4-7 Display Char. display Contents Layer 2 Layer 3 Layer 4 CAMERA CONNECTION >CamConnect Enters the mode to set the connection statuses of cameras. NO/ CONNECT – For the setting procedure, see “Setting the Camera to Use” on page 5-7. MONI DISP STRUCTURE >Moni Disp For setting the scree[...]

Chapter 4 Menu Operations 4-8 Chapter 4 Menu Operations Indication Control Menu Monitor screen SETUP MENU INDICATION CONTROL MENU BORDER LINE : BLACK DATE FORMAT : M D Y MONTH FORMAT : NUMBER TIME FORMAT : 12H FRNT TIME DISP : TM MD MONI CHAR TYPE : WHITE MONI CHAR POS : UP MONI CHAR INFO REC CHAR POSI : UPLEFT REC CHAR INFO CAMERA NAME The items m[...]

Chapter 4 Menu Operations Chapter 4 Menu Operations 4-9 Display Char. display Contents Layer 2 Layer 3 Layer 4 MONI CHAR POS >MoniChrPos Selects the position of character display on the screen. UP >>Up Displays information, such as date/time and operating status of the recorder, on the upper of the screen. DOWN >>Down To be selected [...]

Chapter 4 Menu Operations 4-10 Chapter 4 Menu Operations Display Char. display Contents Layer 2 Layer 3 Layer 4 NORMAL REC >Rec Mode Selects Recording mode for normal recording. REC MODE 1 >>Mode 1 REC MODE 2 >>Mode 2 REC MODE 3 >>Mode 3 REC MODE 4 >>Mode 4 REC MODE 5 >>Mode 5 TIMER REC >Timer Rec Selects the ite[...]

Chapter 4 Menu Operations Chapter 4 Menu Operations 4-11 Function Control Menu Monitor display SETUP MENU FUNCTION CONTROL MENU AUTO REW : ON POWER ON REC : OFF BEEP : ON STILL : FRAME PRIORITY : PLAY PRE REV TIME : 5 MIN FUNCTION LEVEL SET PASSWORD SET The item marked with is an enhanced item, which is displayed only when MENU GRADE is set to ENH [...]

Chapter 4 Menu Operations 4-12 Chapter 4 Menu Operations Menu Items Display Char. display Contents Layer 2 Layer 3 Layer 4 NON >>>NON Applies no password restriction. Operable even in LOCK mode. LEVEL1 >>>Level1 Enables the function(s) in LOCK mode with any of the passwords of level 1, 2, and 3. 1) LEVEL2 >>>Level2 Enable[...]

Chapter 4 Menu Operations Chapter 4 Menu Operations 4-13 Remote Control Menu (Enhanced Menu) The Remote Control Menu is an enhanced menu and is displayed only when MENU GRADE is set to ENH on the top menu. Monitor Display SETUP MENU REMOTE CONTROL MENU RS232C : 9600 PARALLEL INPUT PARALLEL OUTPUT PARALLEL OUT VOLTAGE Character display Remote Menu ?[...]

Chapter 4 Menu Operations 4-14 Chapter 4 Menu Operations Menu Items Display Char. display Contents Layer 2 Layer 3 Layer 4 PARALLEL INm MENU >>>Menu Function the same as those on the menu operation block on the SET/YES >>>Set/Yes front panel. RESET/NO >>>Reset/No B >>>Left b >>>Right v >>>Down V[...]

Chapter 4 Menu Operations Chapter 4 Menu Operations 4-15 Maintenance Menu (Enhanced Menu) The Maintenance Menu is an enhanced menu and is displayed only when MENU GRADE is set to ENH on the top menu. Monitor Display SETUP MENU MAINTENANCE MENU HOURS METER VERSION DISPLAY Character display Mainte Menu ↓ Press the b key. >HoursMeter The Maintena[...]

Chapter 5 Connections and Preparations Chapter 5 Connections and Preparations 5-1 Chapter 5 Connections and Preparations Connections V ideo Cameras Number of cameras In the standard HSR-1/1P/2/2P configuration, up to 4 camera can be connected. By mounting the optional HSRA-11 input boards (max. 3 boards), 4 inputs per board can be added; thus, a ma[...]

Chapter 5 Connections and Preparations 5-2 Chapter 5 Connections and Preparations S Digital S Digital S Digital S Digital VIDEO IN VIDEO OUT PARALLEL I/O RS-232C S VIDEO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 B A POWER OFF ON 75 Ω ON OFF 75 Ω ON OFF 75 Ω ON OFF 75 Ω ON OFF ⁄ AC IN P ARALLEL I/O RS-232C RS-232C VIDEO OUT S VIDEO IN VIDEO I[...]

Chapter 5 Connections and Preparations Chapter 5 Connections and Preparations 5-3 Connection of the SNT-V304 Video monitor Video cameras VIDEO IN VIDEO OUT PARALLEL I/O RS-232C S VIDEO 1 2 3 4 B A POWER OFF ON 75 Ω ON OFF 75 Ω ON OFF 75 Ω ON OFF 75 Ω ON OFF AC IN Digital Digital Digital Digital RS-232C VIDEO OUT VIDEO OUT VIDEO OUT VIDEO OU[...]

Chapter 5 Connections and Preparations 5-4 Chapter 5 Connections and Preparations Connections Parallel I/O connection examples Connection to the PARALLEL I/O connector (D-sub 37-pin) must be achieved with the following specifications by using the supplied multi connector. The functions of the pins can be assigned from the Remote Control menu (page [...]

Chapter 5 Connections and Preparations Chapter 5 Connections and Preparations 5-5 S DIGITAL SURVELLANCE RECORDER HSR-1 DIGITAL TIMELAPSE CONTROL-S REC EJECT FRAME STOP FRAME REC F FWD PLAY REW ‚ § · º ¶ π ® æ LOCK TIME SEARCH ALARM SERCH CURSOR MENU SET/YES PRESET/NO † YES NO YES NO CONTROL-S Connection for ser[...]

Chapter 5 Connections and Preparations 5-6 Chapter 5 Connections and Preparations Setting the Clock Set the time and date of the built-in clock. The time and date are recorded as data on a tape, and can be superimposed on the playback picture and used for picture search. 1 Enter Menu mode by pressing the MENU key. The Top menu appears on the monito[...]

Chapter 5 Connections and Preparations Chapter 5 Connections and Preparations 5-7 Settings When the connections and preparations are completed, perform the system settings in Enhanced menu mode. In the following setting procedures, the indications on the character display on the front panel of the HSR-1/ 1P/2/2P are shown in parenthesis after those[...]

Chapter 5 Connections and Preparations 5-8 Chapter 5 Connections and Preparations Settings 5 When the settings are completed, press the SET key. A message “NOW SAVING” is displayed, and the settings are stored in nonvolatile memory. The Image Control menu is restored. To restore to the previous setting Before pressing the SET key, press the MEN[...]

Chapter 5 Connections and Preparations Chapter 5 Connections and Preparations 5-9 5 When the settings are completed, press the SET key. A message “NOW SAVING” is displayed, and the settings are stored in nonvolatile memory. The Indication Control menu is restored. To restore to the previous setting Before pressing the SET key, press the MENU ke[...]

Chapter 5 Connections and Preparations 5-10 Chapter 5 Connections and Preparations Settings Repeat steps 4 and 5 for all the divisions. The same camera can be assigned to multiple divisions. When setting the structure in a dividing mode that has multiple pages, the setting display for the subsequent page will appear by pressing the b key in the las[...]

Chapter 5 Connections and Preparations Chapter 5 Connections and Preparations 5-11 To assign a monitor camera Set CAM n (MON). You can specify the camera number by pressing the corresponding number key. Note, however, that the camera set to NO in CAMERA CONNECTION cannot be selected. Repeat steps 4 and 5 for all the divisions. The same camera can b[...]

Chapter 5 Connections and Preparations 5-12 Chapter 5 Connections and Preparations Settings 3 Highlight MONITOR (or display Monitor), and press the b key to move to the lower layer. Example: A Image to Monitor SETUP MENU IMAGE CONTROL MENU A IMAGE MONITOR : MANUAL M * MANUAL AUTO 4 Select AUTO (Auto) by pressing the v key, and return to the upper l[...]

Chapter 5 Connections and Preparations Chapter 5 Connections and Preparations 5-13 2 Highlight SETTING OF REC MODE by pressing the V or v key, then press the b key. The menu shifts to selection layer of the recording mode settings. SETUP MENU REC FUNCTION MENU SETTING OF REC MODE M REC MODE1 m REC MODE2 REC MODE3 REC MODE4 REC MODE5 3 Highlight the[...]

Chapter 5 Connections and Preparations 5-14 Chapter 5 Connections and Preparations 2 Select the value or mode by pressing the b or B key. TAPE LENGTH Set the tape length of the cassette to be used in units of 10 minutes. When you change the TAPE LENGTH value, the REC CYCLE value is recalculated and automatically updated. The longer the tape length [...]

Chapter 5 Connections and Preparations Chapter 5 Connections and Preparations 5-15 Setting Passwords You can set passwords to release the key-lock function that is activated by pressing the LOCK key. As you can classify the recorder’s key functions for three levels each having a different password to release the locks, operations of the functions[...]

Chapter 5 Connections and Preparations 5-16 Chapter 5 Connections and Preparations 3 To change the password, enter a new password twice in the same manner as when you set the previous one, and press the SET key. To delete the password, press the RESET key without entering any number. If you forget the password Consult your Sony dealer. To releasing[...]

Chapter 5 Connections and Preparations Chapter 5 Connections and Preparations 5-17 Setting the Pre-Reverse T ime (HSR-2/2P only) With the HSR-2/2P, set the pre-reverse time to see the latest recorded scenes while recording using the Playback During Recording function. When you press the PLAY (PRE REVERSE PLAY) key during recording, the point of the[...]

Chapter 6 Maintenance and Troubleshooting Chapter 6 Maintenance and Troubleshooting 6-1 Chapter 6 Maintenance and T roubleshooting Maintenance Condensation If you move the unit suddenly from a cold to a warm location, or if you use it in a very humid place, moisture from the air may condense on the head drum. This is called condensation. If a tape [...]

Chapter 6 Maintenance and Troubleshooting 6-2 Chapter 6 Maintenance and Troubleshooting Regular Checks Digital hours meter The digital hours meter keeps cumulative counts of the total operating time, the head drum rotation time, the tape transport operating time, and the number of threading/unthreading operations. These counts can be displayed on t[...]

Chapter 6 Maintenance and Troubleshooting Chapter 6 Maintenance and Troubleshooting 6-3 The following illustrates the digital hours meter indications on the character display in all four display modes. The right-hand indication for each display mode is the indication you can view while holding down the b key. T1 (OPERATION) mode: Oper. 00000 T2 (DR[...]

Chapter 6 Maintenance and Troubleshooting 6-4 Chapter 6 Maintenance and Troubleshooting T roubleshooting If some alarm message appears on the monitor screen or the character display, or if the unit appears to be Sympton Cause Remedy Recording is not possible. The cassette’s REC/SAVE switch is set to SAVE. The tape transport keys The key lock func[...]

Chapter 6 Maintenance and Troubleshooting Chapter 6 Maintenance and Troubleshooting 6-5 Error Codes and Messages This unit is provided with a self-diagnosis function that detects internal errors. When it detects an error, it Code Message Meanings 00-001 ERROR 00-001 AN ERROR DETECTED IN TAPE BLOCK. ERROR 00-001 AN ERROR DETECTED IN TAPE BLOCK. 00-0[...]

Appendices Appendices A-1 Appendices Notes on Use Operation and storage locations Avoid operation or storage in any of the following places. • Location subject to extremes of temperature (operating temperature range 5 ° C to 40 ° C (41 ° F to 104 ° F)) • Location subject to direct sunlight for long periods, or close to heating appliances (N[...]

Appendices A-2 Appendices General Power requirements HSR-1/2: AC 100 to 120 V, 50/60 Hz HSR-1P/2P: AC 220 to 240 V, 50/60 Hz Power consumption 58 W (without options) 78 W (with full options) Operating temperature 5°C to 40°C (41°F to 104°F) Storeage temperature –20°C to +60°C (–4 ° F to +140 ° F) Operating humidity Less than 80% Storage[...]

Index Index I-1 Index A A IMAGE 4-6 AC IN connector 1-9 ALARM indication 1-7 ALARM REC 3-5, 4-10 Alarm recording 3-4 activate 3-6 cancel 3-6 mode 3-4 set 3-5 Alarm search 3-9 cancel 3-10 execute 3-9 ALARM SEARCH key 1-7, 3-9 AUTO REW 4-11 Automatic change cycle 5-11 B B IMAGE 4-6 Back space editing 3-13 BEEP 4-11 Border line 2-3 BORDER LINE 4-8 C C[...]

Index Index I-2 Index PLAY DISP STRUCTURE 4-7, 5-10 PLAY key and indicator 1-6 Playback 2-9 advance at a high speed 2-9 advance by one frame 2-9 during recording (HSR-2/2P) 2-12 reverse at a high speed 2-9 reverse by one frame 2-9 stop 2-9 POWER switch 1-9 POWER ON REC 4-11 PREALARM mode (alarm recording) 3-4 PRE REVERSE PLAY key (HSR-2/2P) 1-6 Pre[...]

Sony Corporation Printed in Japan[...]