Sony SRP-X700P manual

SRP-X700P 2-347-836- 22 (1)  2003 Sony Corporation Digital Powered Mixer Operating Instructions Before operating the unit, please read this manual thoroughly and retain it for future reference. Note The supplied CD-ROM includes operating instructions for the SRP-X700P Digital Powered Mixer (English, Japanese, French, German, Spanish, Italian and[...]

2 W ARNING For customers in Canada This ClassB digital apparatus complies With Canadian ICES-003. Owner’s Record The model and serial numbers are located on the rear of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. SRP-X700P Serial No. ______[...]

3 Featur es The SRP-X700P is a versatile digital power ed mixer that incorporates an audio mixer , RGB/video switcher , processor and power amplif ier in the 3U rack size. Built-in digital mixer The digital mixer incorporates A/D and D/A conv erters operating at 24 bit/48 kHz sampling and a high-performance DSP . In addition to the usual functions [...]

4 1 PO WER button and PO WER indicator Pressing the PO WER button turns on the power . The POWER indicator lights in green when the po wer turns on. Y ou can switch the projectors and displays connected to the SRP-X700P , to power-on state or to po wer standby state from the SRP-X700P as they are interlock ed by the SRP-X700P Manager setup. By defa[...]

5 7 Po wer amplifier indicators • PRO TECTION indicator The PR OTECTION indicator lights in red when the protection circuit of the internal power amplif ier works. • CLIP indicator The CLIP indicator lights in red when the output le vel of the internal power amplif ier is excessiv e such that the output signal is distorted. Notes When the PR OT[...]

6 1 MIC INPUT 1 and MIC INPUT 2 terminals The microphone input terminals. The wireless microphone has the first priority when the tuner unit is installed but you can use the wired microphone up until you turn ON the PO WER of the wireless microphone. 2 MIC INPUT 3 and MIC INPUT 4 terminals The microphone input terminals. 3 MIC 5/LINE 1 IN and MIC 6[...]

7 0 V ideo output terminals The video signal that is selected by the LINE 4 SELECT button on the front panel is output from this terminal. (The video signal format is not con verted from each other .) • 5BNC output terminals The RGB and component signal output terminals. • VIDEO terminal The composite signal output terminal. • S VIDEO termina[...]

8 Fig. 1 Fig. 2 Location and function of parts T uner Unit How to install the tuner unit 1 T urn off the po wer of this unit. 2 Remov e the tuner cov er . 3 Check the up and down sides of the tuner unit, and inser t it into the slot. (Fig. 1) 4 After installation of the tuner unit, turn on the po wer of the unit and turn on the power of the wireles[...]

9 How to Contr ol the Display fr om the SRP-X700P PROJECTOR CONTROL RS-232C T erminal T o connect the RS-232C terminal of applicable projectors and that of plasma display to this terminal; This model can switch the input signals and power ON/ST ANDBY of the projector and plasma display in interlocked condition. <SRP-X700P side> (D-sub 9-pin, [...]

10 REMOTE P ARALLEL T erminal The REMO TE P ARALLEL terminal enables the SRP-X700P to be remotely controlled with a simple circuit connected externally to this terminal. T erminal shape : D-sub 25-pin, female Recommended cable : Multi-core shielded cable for data communication Cable length : 50 m or less INPUT terminal Y ou can set the functions of[...]

11 How to Contr ol A V Equipment fr om the SRP-X700P The SRP-X700P can control the Sony equipment connected to the CONTROL S OUTPUT1 thr ough 4 terminals. The procedure to set up the MA CHINE CONTROL on the SRP-X700P Manager, and the functions, which can be operated, from the SRP-X700P ar e shown in the table b elow . Note that the functions of REC[...]

12 System Configuration System example when operating the SRP-X700P with the default setting when shipped fr om the factory LINE4 INPUT LINE3 IN AC IN +48V +48V +48V +48V 1234 2 1 3 4 5 6 L R FRONT RS-232C COMPONENT/RGB B 7 8 1 2 MIC INPUT LINE OUTPUT ACD E F VIDEO ANT IN a ANT IN b OUTPUT R/R-Y VIDEO SPEAKERS REC OUT REMOTE P ARALLEL S VIDEO S VID[...]

13 System example when external operation panel and environment equipment ar e connected LINE4 INPUT LINE3 IN AC IN +48V +48V +48V +48V 1234 2 1 3 4 5 6 L R FRONT RS-232C COMPONENT/RGB B 7 8 1 2 MIC INPUT LINE OUTPUT ACD E F VIDEO ANT IN a ANT IN b OUTPUT R/R-Y VIDEO SPEAKERS REC OUT REMOTE P ARALLEL S VIDEO S VIDEO CONTROL S IN OUT PROJECTOR CONTR[...]

14 System Configuration System example when operating the SRP-X700P fr om the REMOTE P ARALLEL terminal The REMO TE P ARALLEL terminal of the SRP-X700P is shipped from the factory with the def ault setting on the premise of the extern al operation panel as described below . ST ART b utton (SCENE No. 1 recall): Sets OUTPUT7 and OUTPUT9 to ON to lowe[...]

15 Default settings INPUT Item Initial setting MIC1 - MIC4 – 50 dBu TRIM MIC5/LINE1, MIC6/LINE2 +4 dBu LINE3, LINE4A - 4F 0 dBu LCF MIC1 - MIC4 ON MIC5/LINE1, MIC6/LINE2 OFF PEQ OFF FR OFF COMP SOFT MUTING OFF GAIN LIMIT +10 dB INPUT FADER 0 dB Band 1 63 Hz MIC1 - MIC4 FREQ Band 2 2.5 kHz MIC5/LINE1, Band 3 20 kHz MIC6/LINE2 Band 1 1.0 PEQ Q Band[...]

16 Default settings GROUP F ADER Item Initial setting MASTER A MIC1/WL1, MIC2/WL2, MIC3, MIC4 MASTER B MIC5/LINE1, MIC6/LINE2, LINE3, LINE4 REMOTE1 - REMOTE6 Not assigned Item Initial setting INPUT1 AV SEL A INPUT2 AV SEL B INPUT3 AV SEL C INPUT4 AV SEL D INPUT5 AV SEL E INPUT INPUT6 AV SEL F INPUT7 RECALL 1 INPUT8 RECALL 2 INPUT9 RECALL 3 INPUT10 [...]

17 Block Diagram +48V TUNER SLO T A/D RF IND . LCF +48V LINE COMP A/D A B C D E F COMPONENT /RGB OUT VIDEO OUT RS-232C for projector control RS-232C for e xter nal system controller P ARALLEL REMO TE PROJECT OR CTRL S IN PROJECT OR CTRL S OUT CTRL S OUT 1,2,3,4 USB (FRONT) USB(REAR) MAIN CPU TRIM TRIM INPUT SELECT OR F ADER 14IN 10OUT A UTOMA TIC M[...]

18 Specifications A UDIO Frequency response 20 Hz to 20 kHz ± 0.5 dB (with LINE OUT , 1 kHz reference) T .H.D 0.01 % or less (LINE OUT , 1 kHz) S/N ratio 94 d B or more (LINE 3, LINE 4, IHF-A) Crosstalk – 85 dB or less (between LINE channels, 1 kHz with input cutof f) Equiv alent input noise lev el – 124 dBu or less ( – 60 dBu, with input te[...]

19 General Power requirement A C 120 V , 50/60 Hz Power consumption 150 W Dimensions 482 × 132 × 350 mm (w/h/d) (19 × 5 1 / 4 × 13 7 / 8 inches) (excluding protrusions) Mass Approx. 13 kg (28 lb 11 oz) Operating temperature 0 ° C to 40 ° C Storage temperature – 20 ° C to 60 ° C Supplied accessories Po wer cord (1), Foot (4), CD-R OM (1), [...]

T r oubleshooting Symptom Power is not turned on. No sound is output. No microphone sound is output. Sound is distorted. No video comes out. The SRP-X700P cannot be controlled by RS-232C. PROTECTION indicator remains lit. Cause/Remedy • Power cord is disconnected. → Firmly insert the power cord fully into the AC IN terminal and wall outlet. •[...]