Speco DVR-T4IP manual

USER MANUAL 4-CHANNEL TRIPLEX NETWORK DVR DVR-T4IP * Default system password: 111111 (for RAMS, Record stop, Menu set up, System off, Auto key lock ) * Default ID: admin (for RAMS) Speco T echnologies , 200 New Highway Amityville, N.Y . 1 1701 T oll Free : 1-800-645-5516 In Metro NY : 631-957-8700 Fax:631-957-9142 or 631-957-3880 Web:w w w.specotec[...]

2 T o prevent fire or shock hazard, do not expose the unit to rain or moisture. The symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the unit. The symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within[...]

3 Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as[...]

4 T able of content s 1. SYSTEM OV ER VIEWS .......................................................... 13 1.1 P ACKING L IST ....................................................................................................................... 13 1.1.1 Components......................................................................................[...]

5 2.6.1 Press the Pl ay button .......................................................................................................... . 25 2.6.2 Audio f iles .................................................................................................................... ....... 25 2.7 S EARCH ................................................[...]

6 3.2.2.3 Channel number ................................................................................................................. ................. 34 3.2.2.4 Quality ................................................................................................................................................ 34 3.2.2.5 Frame rate .......[...]

7 3.3.8.3 SMTP Server IP address ......................................................................................................... ............ 47 3.3.8.4 Authentication................................................................................................................. .................... 47 3.3.9 Event Log ...................[...]

8 3.7.5 Language ............................................................................................................................. 62 3.7.6 System Log.......................................................................................................................... 62 3.7.7 HDD Setup ..............................................[...]

9 3.1 1 PLA YBACK....................................................................................................................... . 73 3.1 1.1 PLA YBACK of recorde d Images ........................................................................................ 73 3.1 1.1.1 Method of playback .................................................[...]

1 0 4.3.21 Close pr ogram ..................................................................................................................... 93 4.4 U NI P LA YER .......................................................................................................................... 93 4.4.1 Screen and button ...................................[...]

1 1 5.1.1 Installing single ha rd disk drive ......................................................................................... 11 3 5.1.2 Installing two hard disk drives. .......................................................................................... 11 4 5.1.3 Installing CD -R W drive.............................................[...]

1 2 All rights reserved. No part of this p u blication may be reproduced or transmitted in any form or any means, electronic or mechani cal, including photocopy , recording, or any information storage and retrieval system, without prior perm ission.[...]

1 3 1. SYSTEM OVER VIEWS 1.1 Packing list The following items are included with the DVR-T4IP . Please be certain that all items are included as soon as you open the box: 1.1.1 Component s  DVR-T4IP (Main Assembly)  Power cable  Rack mount brackets  DSUB-15 connector for PTZ /AUX / ALARM  Quick Manual  Software CD (RAMS, UniPlayer [...]

1 4 1.2 Features & specifications 1.2.1 Features  4-channel Embedded Digital Video Recorder  MPEG-2 compression  Quadplex mode for simultaneous recordi ng, playback, backup, and networking  Live remote viewing, on-the-fly reco rding, and control over the network  Dynamic IP support (DHCP & PPPoE)  Alarm triggered FTP and E[...]

1 5 1.2.2 Specifications Item Description Image System NTSC, P AL selectable Video Input 4CH Composite, 4CH Loop through, BNC Video Output 1CH Composite, BNC, 1CH S-Video Video Compression MPEG-2 Quad NTSC: 720x480 (30fp s) P AL : 720x576 (25fps) Recording Resolution MUX NTSC: 720x480 (30fps), 360x240 (120fp s) P AL : 720x576 (25fps), 360x288 (100f[...]

1 6 1.3 Name, function & connections 1.3.1 Front view 12 3 4 5 6 7 8 Description: 1. Removable HDD Rack or CD-RW Rack  Removable Hard Disk Drive or CD RW Drive 2. LED indicator  POWER: Power Off status is indicated by a R ed light and ON st atus is indicated by a Green light.  REC: Green light (Recording)  ALARM: Green light (Alarm [...]

1 7  ZOOM: Zoom In/Out on the images during Live Viewing.  FRZ : Freeze. - Press button once to freeze the frame at live mode. Press again to return. - T o take a still image capture at playback mode. -Exchange of video input type : Press p ower butt on with FRZ button from NTSC to Pal or P AL to NTSC.  MISC/SH: Miscellaneous functions or [...]

1 8 8. Recording/Playback buttons  RECORD: Press once to begin recording all acti ve channels. Press again to end recording.  R-PLA Y : Reverse Playback. Press to begin reverse playback. Under PTZ control menu, used to decrease the speed of Pan, T ilt, Zoom, Focus.  STOP: S top playback.  PLA Y : Access to playback. - Playback button wi[...]

1 9 6. VIDEO OUT  T erminals for composite video and s-video to connect with monitor 7. CAMERA  IN: Video input (to connect with camera output)  OUT : Video output (Loop-through output for video input) 8. F AN  Heat protection fan to reduce heat in the unit 9. POWER INPUT  Power cord terminal (free voltage, 100 - 240V AC, 50Hz/60Hz)[...]

2 0 1.3.3 Remote control function POWER NET HDD NUMBER SEQ DIRECTION / OK REVERSE PLAY STOP FRZ PTZ 4 Division MUTE REC LOG INFO LOCK DVR SEARCH MENU MULTI PAUSE PLAY ZOOM OSD  MUTE: V oice Mute support or not support  HDD: HDD status information  NET : Network connection status & user connection information  INFO: Hardware & So[...]

2 1 1.4 INST ALLA TION 1.4.1 Installation and connection Camera 1 Camera 4 Camera 3 Camera 2 Monitor Speak Sensor 1 PTZ Reciever Alarm Network USB Sensor 4 Sensor 3 Sensor 2 RS-485 AUX IN AUX OUT Mic 1.4.1.1 Camera The unit comes with 4 video IN a nd 4 video OUT for up to four camera connection. Connect to 'IN' terminal for video input an[...]

2 2 1.4.1.3 Audio : support or not support Use IN for a Line input and OUT for speaker output. 1.4.1.4 RS-232 Use this connector to connect RS-232 cable to the serial port on your PC to control the DVR or to perform Quick Installation. 1.4.1.5 PTZ/AUX/ALARM 1.4.1.5.1 RS-485+, RS-485- DVR-T4IP uses RS-4 85 protocol to control PTZ Receiver , S peed D[...]

2 3 1.4.1.5.4 Sensor 1~4 Users can connect up to four N.O./N.C. type sensors and co nfig ure them within Main Menu, Sensor Setting. 1.4.1.6 Network Connect RJ-45 Ethernet cable. 1.4.1.7 USB flash memory Perform backup of record ed video files fr om DVR system to USB flash memory manually .[...]

2 4 2. Basic operation procedures 2.1 Power On/Off 2.1.1 Power on Using either the keyp ad or the remote control, pr ess the “Power” button. (Note: I n case of power outage or rare inst ance of system failure, the DVR will reboot automatically) The Power LED light will turn from red to green when it has turned on properly . In a standby mode, t[...]

2 5 2.5.1 Recording types There are two types of recording: MUX or QU AD type. For resolution, select either D1 (720*480 (NTSC), 720*576 (PAL)) or CIF (360*240 (NTSC), 360*288 (PAL)). Audio channel is synchronized with the selected video signal. Select Video input quality, Frame rate, and recording mode. 2.5.2 Recording modes Recording mode are mad[...]

2 6 2.8 Backup The DVR-T4IP has various types of backup methods : 2.8.1 Removable HDD  If there are two hard disk drives equip ped in the DVR, the removable HDD will be used as a backup drive. MANUAL BACKUP , AUTO BAC KUP will be selectable for backup.  MANUAL BACKUP: Execute backup dur ing user ’s preferable setting.  AUTO BACKUP: Execu[...]

2 7 2.9 Client Program 2.9.1 RAMS (Remote Access & Monitoring System)  Remotely access, monitor , and operate the DVR for real-time live viewi ng, playback, backup, on-the-fly recording, and c ontrol over the LAN/W A N  Upgrade the S/W(Kernel, Ramdisk) of DVR  Install the RAMS program as referred to in section 4.2 of Operation Manual. [...]

2 8 3. Main Setup screen Figure 3-1 Main Setup screen 3.1 Camera Setup menu Figure 3-2 Camera setup screen[...]

2 9 3.1.1 Channel number . A user can select targeted camera from CH # 1 ~ CH # 4. Af ter setting, this, live viewing picture will be changed to selected channel automatically . 3.1.2 Camera Name Edit Figure 3-3 Camera name edit screen User can edit came ra name indicated button p art of each channel. as explained paragraph 2.1.1. According to abov[...]

3 0 3.1.4 PTZ setup Figure 3-4 PTZ setup screen It sets PTZ protocol of t argeted channel in the Camera Setup. (Please refer to p aragraph 3.1.1 for channel selection) 3.1.4.1 Model Number Select the PTZ model or choose “NONE”. 3.1.4.2 PTZ ID Set the PTZ ID: 0 ~ 255 The PTZ ID must match the ID numb er that has been set by the PTZ Controller . [...]

3 1 3.1.4.4 RS-485 Setting Choose from the following to set PTZ RS-485 baud rate: 2400, 4800, 9600, 19200, 38400, 57600, 1 15200 bps. 3.1.4.5 TEST Users can test the PTZ control af ter setting the parameters. After clicking the TEST button, PTZ control will be available and tested by up/ down key . Pan/tilt and Zoom/Focus mode will be controlled af[...]

3 2 Preset numbers are selected by Lef t/R ight buttons and the Pan/T ilt drive moves to the preset position after pressing OK button. - Light : T o turn on/off t he camera lighting selected by Left/Right and OK buttons. - Camera : T o turn on/off the camera itself selected by Left/Right and OK buttons. - Aux : T o turn on/off the AUX (two) connect[...]

3 3 3.2 Record Setup menu 3.2.1 Record T ype Users can select either Quad mode or MUX mode for recording type. MUX Recording records full size recording sequentially from each channel. Quad recording re cords 4 channel video signal as o ne same picture and each channel has quad sliced size. Under MUX Recordin g mode, resolution will be applicable t[...]

3 4 3.2.2.2 Audio Sync As audio input port is one cha nnel available, user should synchronize audio signal with targeted video signal. With sy nchroni zed channel w ill record audio as well as video. But others will only record video input signal only . 3.2.2.3 Channel number Under MUX recording mode, quality , frame rate will be selected per chann[...]

3 5 alarm recording will be cont rolled at Post alarm recording time on Event Setup Menu. (Refer to paragraph 3.3.4) • Sensor: S tart to record under se nsor inpu t. As same as motion mode, it starts pre alarm recording aro und 2 or 3 second and maint ain it until no of sensor input. Post-alarm recording will be controlled at Post alarm recordi n[...]

3 6 3.2.3.3 Audio ON/OFF User can set audio on/off function. If used A udio On mode, audio signal will be recorded simultaneously with video and used audio of f mode, audio signal not be recorded. 3.2.3.4 Frame rate 3.2.3.4.1 NTSC User can set the recording Frame rate at Quad Recording, none (Non recording), 1, 2, 3, 5, 7, 10, 15, 30 fp s will be s[...]

3 7 User can select to set recording schedule targeted date, time based week & 24Hours. Move the cursor to the desired position of time by pressing up/do wn key and set the recording mode at the desired position of time by pressing the OK button with referring to the Help Message per Record Mode on the right posit ion. Af ter the setup, store t[...]

3 8 3.3.1 Motion Detection Setting Figure 3-1 1 Motion Detecting Setup screen Sets up the motion detect ing area and sensitivity . It sets up all 4 cha nnels when it is set on the Quad recording. 3.3.1.1 Channel Sets up the motion dete cting area and sensitivity for each chan nel. It sets up all 4 channels when it is set on the Quad recording. Unde[...]

3 9 3.3.1.3 Detection Zone Figure 3-12 Motion Detecting Area Setup screen Selects the motion detecting area. The sky blue square implies the current cursor and the yellow square implies the area that was alr eady selected as the motion detecting area. When the cursor positions on the area that was selected a s the motion detecting area, it turns gr[...]

4 0 3.3.2 Sensor Setting Figure 3-13 Sensor Setting screen 3.3.2.1 Sensor T ype N.O.: Normal Open. Operation mode for the inst alled sensor ’s cont act point is usually open in normal condition and changed from open to close at sensor ’s detect event. N.C.: Normal Close. Operation mode for the in stalled sensor ’ s contact point is usually cl[...]

4 1 3.3.3 Alarm Output Figure 3-14 Alarm Output Setting: 3.3.3.1 Sensor Configure the alarm out on/off activated by the sensor . 3.3.3.2 Motion Configure the alarm out on/off tr iggered by the motion detection. 3.3.3.3 Relay Time Configure the alarm duration time. It can be set up from 1 second to 60 secon ds in the unit of 5 seconds. 3.3.4 Post Al[...]

4 2 3.3.5 FTP Setting Figure 3-15 FTP Setting Enables the unit to transmit an assigned FTP Len gth of Motion picture to an FTP Server over network when an event occurs. The event will be transmitt ed 15 seconds af ter the event occurs. 3.3.5.1 FTP Server IP address Configure the IP address o f the FTP server . The number change s by moving left and[...]

4 3 3.3.5.2 ID Configure the FTP ID. The ID can contain maximum of 31 characters. Figure 3-16 FTP ID 3.3.5.3 Password Configure the FTP p assword. The password can contain maximum of 12 characters. Figure 3-17 FTP Password input[...]

4 4 3.3.5.4 T arget Path Configure the path to transmit to an FTP server . The path can co ntain maximum of 31 characters. Figure 3-18 FTP Target Path 3.3.5.5 FTP Length of Image (second) Select FTP length of image by second (5 to 10 seconds are select able) to transmit image files for selected seconds. 3.3.6 FTP T rigger Setting Selects on/of f fo[...]

4 5 Figure 3-19 FTP T rigger Setting 3.3.6.1 Sensor Configure sensor events. 3.3.6.2 Motion Configure motion events. 3.3.7 E-Mail Address Setting T ransmits the content of an event log periodically through e-m ail. Configure up to four e-mail address to transmit und er event status simu lta neously . The e-mail address can contain maximum of 31 cha[...]

4 6 Figure 3-20 E-Mail Address setting 3.3.8 E-Mail Setting Figure 3-21 E-Mail Setting 3.3.8.1 Send (Period) Configure the e-mail transmitting cycle. It does not transmit when it is set to NO. The setting time can be set up at the unit s of within 2 minutes af ter event, 30minutes, 1, 2, 5, 12, 24 hours.[...]

4 7 3.3.8.2 Prohibition setting Set up prohibition time to transmit the e-mail. Users can enter prohibition t ime from the starting time and the ending time of transmitting the e-m ail 3.3.8.3 SMTP Server IP address Configure the IP address of the SMTP server to transmit the e-mail. If you do not know your SMTP server IP address then go to Command [...]

4 8 3.3.8.4.1 Password Enter sender ’ s mail password for authentication 3.3.9 Event Log Shows the event log of the selecte d channel. It can reset periodically by setting e-mail as described in paragraph 3.3.7. Figure 3-22 Event Log Display screen[...]

4 9 3.4 Playback Setup Figure 3-23 Playback setup screen 3.4.1 Channel Designate the chann el to be viewed when the “R eplay” button is pressed a nd Channel 1 ~ Channel 4 can be selectable . This option is onl y available when the MUX m ode has been selected. (Please refer t o paragraph 3. 2.1 for Record type) 3.4.2 St arting Point This startin[...]

5 0 3.5 Display Setup screen Figure 3-24 Display setup screen Determine whether to have the following be shown on the monitor: Camera n ame, T ime/Date, HDD status, Borders (Quad V iew). Sel ect either ON/OFF for each item.[...]

5 1 3.6 Network Setup screen Figure 3-25 Network Setup screen 3.6.1 DDNS setting Set up DDNS (Dynamic Domain Name System) server address & port number . Users can set up two DDNS server address and port. Figure 3-26 DDNS setup screen[...]

5 2 Under DHCP or PPPoE configuration using IP Router , the DVR will receive an IP address periodically , and each time, the IP address can be different. Therefore, in order for users to access the DVR over the netwo rk, it must update its IP address to the DDNS Server . Under IP router configuration, IP of DVR mu st be setup as static IP address a[...]

5 3 3.6.2 Remote Connection Login Passw ord There are two levels of access that can be set up in the RAMS program. - Admin (Highest), User (Normal) - B y d e f a u l t , t h e p a s s w o r d i s 111111 w hen the soft ware is first installed. Users can use any numeric number from 0~4, combined 6 units. Figure 3-27 Remote Connection Login Password s[...]

5 4 3.6.4 St atic Figure 3-28 S tatic Network setting 3.6.4.1 DDNS On/off 3.6.4.2 Port Configure the Port number to be used to conn ect to the DVR system using RA MS (Remote Access & Monitoring System). The default Port nu mber is port 80. Change easily by using Jog/shuttle equipped in front panel. 3.6.4.3 IP Address Assign a fixed IP address t[...]

5 5 3.6.5 DHCP Figure 3-29 DHCP setup screen 3.6.5.1 Port Please refer to paragraph 3.6.4.1for Port setting of S tatic/ DHCP/ PPPoE) 3.6.6 PPPoE Figure 3-30 PPPoE setting[...]

5 6 3.6.6.1 Port Please refer to the port setting in paragraph 3.6.4. 3.6.6.2 ID T ype in your user ID for the ADSL account (PPPoE). The password can cont ain maximum of 31 characters. Figure 3-31 ID input screen 3.6.6.3 Password T ype in your user Password fo r the ADSL account (PPPoE), The password can cont ain maximum of 12 characters. Figure 3-[...]

5 7 3.6.7 Changing the Netw ork configuration If users want to change network type of DVR-T4 IP , users must reboot the system. User can restart the new network mode setting af ter entering ‘yes’ key button. Figure 3-33 Changing the Network setting screen 3.7 System Setup screen Figure 3-34 System Setup screen DVR-T4IP[...]

5 8 3.7.1 DVR Name T ype in the name of the DVR you wish to assi gn. The name can contain maximum of 12 digits. Figure 3-35 DVR name screen Using the arrow , type in the DVR name. Click “OK” when finished. 3.7.2 System Password Figure 3-36 System password set up DVR-T4IP[...]

5 9 Set up part for system password, related function and application. This is a part of inst allation, actual sy stem password, related function and p assword application. 3.7.2.1 Password Setting T o change system password: First, type-in the current p assword, confirm. T hen if it is correct, type-in the new p assword twice. If they match, the p[...]

6 0 3.7.2.3 Auto Key Lock Possible Setting time is every 30sec, 1 min, 3min, 5min, 10 minutes. If users choose setting time among them, auto key lock function will st art exactly after the setting time and lock key type icon will be displayed at the bottom of window . Users can access system operation after release from key lock state by entering r[...]

6 1 For example, if users adopt day light saving time from May 01 to Oct.31, input the dates accordingly . 3.7.3.3.1 Apply Configure Day Light Saving T ime. 3.7.3.3.2 St art date (m/d) Set up start day in Day Light Saving Time mode. 3.7.3.3.3 End date (m/d) Set up end date in Day Light Saving T ime mode. 3.7.3.3.4 Apply hour Set up the duration tim[...]

6 2 3.7.5 Language English, Korean, Japanese and S panish are available. 3.7.6 System Log It is for displaying major system events. The items that manage by Log are V ideo Loss, Power On, Power Off, Menu entry , HDD Full, failure of FTP transmission, failure of E-mail transmission. Figure 3-40 System Log screen 3.7.7 HDD Setup Set up for Internal H[...]

6 3 3.7.7.1 The number of HDD Show the HDD quantity that is built –in. 3.7.7.2 Write Mode Set up writing type in recording. T ypes are ‘Once’ and ’Overwrite’. If set up by ‘Once’, HDD can record until the Full state. If set by ‘Overwrite’, HDD will record conti nuously by start overwrite oldest data. 3.7.7.3 Forced erasure The ima[...]

6 4 3.7.7.5.1 Cap acity Please refer to paragraph 3.7.3.1. 3.7.7.5.2 Function Set up for Removable HDD usage. Use rs can fix it for manual Backup, Auto backup, Extension. If it is fixed to manual backup, user s can use for manual backup. It is fixed to auto backup, system will a utomatically backup recordin g image. If it is fixed by extension, it [...]

6 5 Figure 3-44 Set up AUX port screen 3.7.8.1 Active Set up Active state. Low/High will be dif ferent depend on machine.. 3.7.8.2 Function The following list contains a brie f description of each function. 3.7.8.2.1 Direction : IN • UNUSED: Do not use the AUX port. • ALARM RESET IN: Pause alarm or buzzer when event occurred • RECORD ST ART I[...]

6 6 3.7.9 Factory Default All of set-up date of system comes back to Factory default. Confirmation box on picture setting default w ill appear af ter entering default. User can restore the factory default setting after entering ‘yes’ key button. Please refer to paragraph 5.3 for factory default. Figure 3-45 Confirmation box for Factory Default [...]

6 7 Figure 3-46 Software Upgrade - After the unit recognizes the U SB flash drive and upgrading end, the unit will reboot. Figure 3-47 Ramdisk Upgrade 3.8 Backup Backup recording data to HDD or USB Flash Drives Figure 3-48 Backup image[...]

6 8 3.8.1 Backup Device Set up the device for backup. HDD / USB/ CD-RW are available In order to use HDD for backup, the functi on of HDD should be setup as “Manual Backup” In the HDD Setting. 3.8.2 St art Time Input the start of backup date and time. 3.8.3 End Time Input the end of backup date and time. 3.8.4 Channel Choose the channel to back[...]

6 9 3.9 System Information Figure 3-49 System Information 3.9.1 Video type It shows that present V ideo type of System is NTSC or P AL. 3.9.2 H/W version It shows the H/W V ersion of system. 3.9.3 S/W version It shows the S/W V ersion of system 3.9.4 KERNEL version It shows the S/W V ersion of KERNEL. 3.9.5 Mac Address It shows Mac Address of syste[...]

7 0 3.10 Search Menu Figure 3-50 Main Screen of Search 3.10.1 Search by T ime The recorded images are search ed by Time, Channel, Event. DVR saves lat searching condition so it automatically displayed last search condition under search mode. ** Screen where the condition of search will be input. Figure 3-51 Search by time 3.10.1.1 St arting Time S [...]

7 1 3.10.1.2 Ending Time Ending T ime and date for Search is input. The ending year range is from 1970 to 2037, and it is not possible to input any year after 2037. 3.10.1.3 Channel Select the channel for Search from Channel 1 ~ Channel 4. 3.10.1.4 Event Select the Event as follows. • NONE : All of files are searched regardless of Event. • MOTI[...]

7 2 3.10.2.1 Screen of search Figure 3-53 Search Screen of S till Image 3.10.3 Search of back up HDD The images that were backed up ma nually or automatically can be searched by T ime, Channel, Event. Figure 3-54 Screen for input data of HDD Search The method of input and search is the same as that of recorde d file, as indicated in the paragraph 3[...]

7 3 3.11 PLA YBACK 3.11.1 PLA YBACK of recorded Images This function means that th e images recorded in the system are se arched by Time o r Played back directly . 3.11.1.1 Method of playback In order to play back the recorded images, put the Curser to the selected content in the Menu of Search, and press Button “ OK”. The screen of Search resu[...]

7 4 3.11.1.3.1 Stop of Play back If user needs to stop play back, user should press button “ STOP” in the remote controller of in the system, and play back stops and live screen is coming back. 3.11.1.3.2 T empo rary Stop during Playback In order to stop temporarily playback, press button “ P AUSE”. If users press the button “P AUSE” ag[...]

7 5 3.11.1.3.6 Audio ON / OFF In case of recorded image with Audio, u ser ca n on or of f by using the button “ AUDIO MUTE”. The Icon in the top of screen shows t he status (On / Of f) of AUDIO. 3.11.2 Playback of still image 3.11.2.1 Method of playback As the paragraph 3.2.1, users put the curser to contents. In the searched still Image Lists,[...]

7 6 Playback stops and screen of search list appears. 3.11.2.3.2 Next screen Press Button “RIGHT” and next screen is played back. 3.11.2.3.3 Previous screen Press Button “LEFT” and previous screen is played back. 3.11.3 Playback the backed up-image This function means that the images in the backup HDD that were backed up manually or automat[...]

7 7 3.12.1 NET Displays the current network IP and the user connected to the network. (it substitutes the NET button on the remote control). Figure 3-58 Network Information 3.12.2 OSD T urns on/off the OSD (On Screen Display). It substitutes the OSD button on the r e m o t e c o n t r o l . 3.12.3 Audio Mute T urns on/off the audio. It substitutes [...]

7 8 4. DVR-T4IP Client program 4.1 Overview of DVR-T4IP  DVR-T4IP (Digital V ideo Recorder , MPEG-2, 4c hannel) has three types of client operation programs.  RAMS (Remote Access & Monitoring System) is us ed to remotely access, monitor , and operate the DVR for real-time live viewing, play back, backup, on -the-fly recording, and control[...]

7 9 4.3 RAMS (Remote Access & Monitoring System) 4.3.1 Screen and button ① Event indication icon ( Motion, Sensor). The color will change upon event activation. ( => , => ) ② Screen display ③ Channel function button (On/Off, Capture, Record) ④ Channel selection button (1CH, 2CH, 3CH, 4CH, Quad) ⑤ Quad Capture, Quad Record button[...]

8 0 4.3.2 Connecting to DVR Click icon to open the DVR list. ① This box allows the user to select the IP address assigned to the selected unit. This is required for making a network connection. ② To create a new IP address & DVR select ion, enter the DVR name, DVR address, and port number. ③ Click Add to add the newly entered DVR informat[...]

8 1 4.3.3 Channel On/Off After connected, icon is changed to icon. Under this status, if users push icon, channel name & date displayed in front part of this screen will be phased out. Under bad network transmission condition, if users use selected channel, pre-allocated channel transmission will be better. If users enter this icon again, enter[...]

8 2 4.3.5 Full-screen display If you push this icon in the main menu, full screen form appears. If users press the key of ESC, you will return to the selected screen. 4.3.6 Program setup If users click this button in the main window, window of program setup appears. ① Capture a still image and select a folder where the image is recorded C:Progra[...]

8 3 ② Select the image of water mark to be input in the still image ③ Set up a program by user’s language ④ Set up whether alarm occurrence is on or off when motion detection or sensor icon activated. ⑤ Close the window without saving the setup ⑥ Close the window after saving the setup 4.3.7 DVR recording It works as recording button of[...]

8 4 => DVR (Recording mode) 4.3.8 DVR playback search This button is used for playback search , playback, and backup functions for DVR and after logging in by admin.[...]

8 5 ① Enter search time from start time to end time ② Check if user want to search event condition ③ Select targeted channel for search ④ Close DVR playback search ⑤ Start to search by selected searching condition ⑥ Previous research result will appears 4.3.9 DVR playback search Search data will appear list form if users push two button[...]

8 6 After selecting a file at list, push play button or do double clicks in order to watch playback pictures. ① Change present mode to playback mode ② Display playback picture derived from DVR system ③ Button for reverse playback, pause, still, reve rse phase, forward phase, slow, fast, previous search, next search ④ Comeback playback mode [...]

8 7 When user use temporarily paus e image file move to forward Play stored files slowly. User can control by clicking this button Play stored files quickly. User c an control by clicking this button Playback button. Start playback previ ous files of present viewing files Playback button. Start playback nex t files of present viewing files 4.3.10 D[...]

8 8 progress rate. Even backup, users can stop it by pushing button. Close DVR backup window with pushing button. (Even backup mode, it will be stopped & closed.) 4.3.11 DVR Setting This button is for linking into quick installation program is used to manage setting parameter of DVR easily. It can be activated after logging in by admin. 4.3.12 [...]

8 9 ① Select check box in order to insert watermark into still image capture ② Save still image as user defined default file name if chosen ③ Save still image as user selected new file name if chosen ④ Insert keyword to user easy searching ⑤ Close still image capture window ⑥ Print still image capture file ⑦ Save still image. The dest[...]

9 0 ① Select the targeted channel changed recording time. Among this mode, Quad mean that timing choice for recording button on main menu ② Continuous recording until clients stop recording mode ③ Continuous recording until targeted minutes . Of course, it stopped manually by users ④ Continuous recording until targeted dat e & time. It [...]

9 1 4.3.18 HDD Information Orange: used parts of HDD, White: remaining par of HDD. Detailed HDD in formation will be activated on pushing this icon. ① Select hard disk ② It shows total capacity of HDD ③ It shows the used capacity of HDD used ④ It shows the capacity of HDD to be used ⑤ It shows the capacity of HDD used and to be used ⑥ C[...]

9 2 ③ Display S/W update window of DVR system 4.3.20 S/W upgrade of DVR S/W upgrade window is activated on pushing S/W upgrade button in the program version check screen ① : Select targeted files to upgrade ② : Select targeted files saved in local PC ③ : Enter targeted DVR information such as DVR address, Port , user, and password (admin on[...]

9 3 4.3.21 Close program Closed Multiviewer program 4.4 UniPlayer 4.4.1 Screen and button ① Icon for event (Motion detec tio n, Sensor). If events happen => , => the color of icon changes. ② Button per channel (Capture, Print, D-zoom) ③ Playback picture ④ : Indicator for playback progress rate ⑤ : Reverse playback, playback, still, [...]

9 4 ⑮ Button for closing program 4.4.2 Search Users access to search files after push th is icon. As files are default mode, without knowing of files, users can access it. 4.4.2.1 Search option from video image & backup file ① Select whether recording files at RAMS, Multiviewer or backup files ② Enter targeted recording date for search ?[...]

9 5 => If there is nothing to special condition for search ing, all files saved in recording folder will be displayed on search window after searched. => Search window after selected channel number 1 as search option.[...]

9 6 4.4.2.2 Search option for still image ① Enter targeted recording date for search ② Enter targeted DVR name for search ③ Enter targeted channel ④ Enter keyword to classification to list ⑤ Start to search accordingly ⑥ Close search option window => If there is nothing to special condition for sear ching, all still images saved in f[...]

9 7 => Search window after selected channel number 1 & selected date (June 22.004) as search option. 4.4.3 Searching by directory You can use it when you know the director y has AVI file or still image file. It will be set up default directory at first. After that us ers can choose their own directory than see all folder user want to save wi[...]

9 8 => AVI file Playing screen by searching scene 4.4.4 Still Image Capture Save replaying images into still image by capture. Besides users can capture image by push capture button for e ach channel or push capture button at the foot of a scre en. Still image will be saved in a path of which is established in RAMS’s setup section screen[...]

9 9 ① Select check box in order to insert watermark into still image capture ② Save still image as user defined default file name if chosen ③ Save still image as user selected new file name if chosen ④ Insert keyword to user easy searching ⑤ Close still image capture window ⑥ Print still image capture file ⑦ Save still image. The dest[...]

100 When user use temporarily paus e image file, move to backward When user use temporarily pause image file, move to forward. Play file slowly. Users can control by click this button. Play file quickly. User can control by click this button. 4.4.9 Water mark drawing When still image is display, if push this button watermark will be drawn. If you f[...]

101  Watermark viewing screen. If you find other colo r except black, white, blue color, image file must get damaged. 4.4.10 Panorama You can see the panorama screen when you pus h this button while file playing. (Button will change into like this button. . And & button can help user to view screen while control screen back and forth. And cl[...]

102 => Screen in panorama mode.[...]

103 => Image when click one screen in panorama mode. 4.4.11 Check the program version. Click this icon logo to confirm version. 4.4.12 Close Program Close UniPlayer program[...]

104 4.5 MultiViewer 4.5.1 Program login ① Insert program password. ② If inserted password is right, multiviewer runs. ③ Close program ④ Modify program password. ① After inserting current password, change password, & confirm password accordingly, changes program pass. ② Closing window without changing. Return to login window[...]

105 4.5.2 Screen and Button ① ICON for Event (Motion, Sensor ): If an Event is activated, => , => the color of icons change. ② BUTTON for channel (Connect/Disconnect, Capture, Record) ③ Channel SCREEN ③ Click on icon logo to check the version of program ⑤ Actual Time shows. ⑥ Information of Hard Disk of PC shows ⑦ Button for div[...]

106 window appear. ① DVR List that user recorded, appears. ② Input DVR name, IP address, domain name, port ③ Input id name ④ Input id password ⑤ Delete the information selected in DVR List ⑥ Modify the information of DVR List ⑦ Add the information in DVR List ⑧ Connect to the selected DVR ID ⑨ Close the screen, after storing DVR L[...]

107 => Connected screen => If connection is impossible, it displays error defectives on screen. 4.5.4 Camera On/Off In order to connect to DVR in the main screen, please click button, and select DVR, and log in. After connection, please click one more time , and DVR is disconnected.[...]

108 4.5.5 Full Screen Click the Full Screen button to open a screen in full view. Press ESC to return. . 4.5.6 Program Setup Click to launch Setup. C:Program Files / DVR / DVR Viewer C:Program Files DVR DVR View er MARK4015[...]

109 ① Indicates the file location of the captured still Image ② Indicates the file location of the wate rmark image to be inserted in the still image ③ Select language ④ Set up whether alarm occurrence is on or off when motion detection or sensor icon activated. ⑤ Check the image among 4channels ⑥ Check the image among 9 channels ⑦ Cl[...]

1 1 0 ① Select HDD disk ② It shows total capacity of HDD ③ It shows the used capacity of HDD ④ It shows the free capacity of HDD ⑤ It shows both the used capacity of HDD and free space ⑥ Click to close the screen 4.5.10 Confirmation of V ersion of Program Click this icon to check the program version. 4.5.11 Closing of Program Click to c[...]

1 1 1 4.6 Quick Inst aller 4.6.1 Select model Clicks to select DVR model name and video type in order to set system parameters. 4.6.2 System p arameter setting * Right part s on System parameter setting window is same form as Main menu used in DVR system. Users can change DVR system parameter by entering each menu. * Main menu description * File -&[...]

1 1 2 parameters of DVR. 5. System parameter->Default value se tting: Initialize parameters values. 6. Communication->Network: Communicate data through network. 7. Communication->Serial: Comm unicate dat a throug h serial port (Setting preferable ComPort) 8. Language: Click to select preferable language 9. Information: Click to display pro[...]

1 1 3 5. Appendix 5.1 Inst alling HDD 5.1.1 Installing single hard disk drive The following procedure is for installing either one internal HDD or one removable HDD. Please note that the Jumper setting must be set to MASTER. T o Install a single HDD in the Removable Bay , please follow these steps  Prepare one HDD. V erify the Jumper setting. It[...]

1 1 4  Slide-in the Removable Bay in to the DVR  Lock the Removable Bay . 5.1.2 Installing two hard disk drives.  The Jumper setting should be done as follows: - The Internal HDD: Master - The Removable Bay HDD: Slave  Mount the HDD in the internal slot.[...]

1 1 5  Once the HDD has been firmly mounted in t he DVR, con nect the power cable and the data cable.  T o install the second HDD in the Removable Bay , set the Jumper setting on the removable HDD to Slave. Follow the procedur e as listed in p aragraph1.1.1 of Appendix V. 5.1.3 Installing CD-R W drive  T o install the CD-RW drive in the Re[...]

1 1 6  The CD-RW drive install ed in the DVR system[...]

1 1 7 5.2 T erminal Information 5.2.1 DSUB-9P (RS-232) 15 69 No Name Description 2 RXD Receive Data 3 TXD T ransmit Data 5 GND Signal Ground 5.2.2 DSUB-15P (PTZ / AUX / ALARM / SENSOR) 18 9 15 No Name Description No Name Description 1 RS-485+ RS-485 T ransmit Data + 9 Alarm Out Alarm Out (NO) 2 RS-485- RS-485 Transmit Dat a - 10 Alarm Out Alarm Out[...]

1 1 8 5.3 Factory Default V alue 5.3.1 Main Menu Menu Main menu Sub menu1 Sub menu2 Sub menu3 Default V alue Remarks Channel Channel No CH-1~CH-4 Camera Name CH-1~CH-4 Camera Hide Off Model No NONE URX-500, PELCO-D, SENSORMA TIC, VICON, SUNGJIN MRX-1000 SRX-100B PTZ ID Channel No Reverse Control Pan NO T ilt NO Zoom NO Focus NO PTZ Setup RS-485 Set[...]

1 1 9 Password Blank T arget Path / FTP Length of Image 5 sec 5, 6, 7, 8, 9, 10 sec Sensor CH1~CH4 OFF FTP T rigger Setting Motion CH1~CH4 OFF Receiver Address 1~4 Blank E-Mail Address Setting Sender Address 1 Blank Send (Period) NO YES / NO NO S tart Hour 01 Prohibition Setting End Hour 01 SMTP Server IP Blank Authentication YES / NO NO E-Mail Set[...]

120 S tart Date (m/d) 01/01 End Date (m/d) 01/01 Apply Hour 00 Sensor OFF Motion OFF Buzzer Video Loss OFF Language ENGLISH System Log Mounted HDD 1 or 2 Write Mode Overw rite Forced Deletion (day s ago) OFF 1~100 Capacity Used Cap. / T otal C ap. I n t e rnal HDD Format Capacity Used Cap. / T otal C ap. Function EXTENSION HDD Setup Removable HDD F[...]

121 5.3.2 Search Menu Menu Main menu Sub menu1 Sub menu2 Sub menu3 Default V alue Remarks Sta r t Ti m e Date : Date of Y esterday Ti m e : C u r r en t Ti m e End T ime Date : Date of T oday Ti m e : C u r r en t Ti m e Channel CH1 Search by T ime Event NONE S till Image Search Sta r t Ti m e Date : Date of Y esterday Ti m e : C u r r en t Ti m e [...]

122 5.4 Protocol 5.4.1 Code t able No Protocol Description Remarks 1 kmute Audio Mute 2 krec Record 3 khdd HDD Information 4 knet Network user information 5 klog Log Display 6 kinfo System Information 7 knum1 Number 1 8 knum2 Number 2 9 knum3 Number 3 10 knum4 Number 4 1 1 knum5 Number 5 12 knum6 Number 6 13 knum7 Number 7 14 knum8 Number 8 15 knum[...]

123 50 ks1 Shuttle lef t 1S tep 51 ks2 Shuttle lef t 2S tep 52 ks3 Shuttle lef t 3S tep 53 ks4 Shuttle lef t 4S tep 54 ks5 Shuttle lef t 5S tep 55 ks6 Shuttle lef t 6S tep 56 ks7 Shuttle lef t 7S tep 57 kjleft Jog left 58 kjright Jog right 59 kpower Power 5.4.2 Usage - System protocol to control DVR from remote client software installed in PC or re[...]

124 5.5 HDD recording time t a ble (Based on recording mode, Resolution, picture Quality, FPS) Recording time per HDD capacity (HR) TV System Record Mode Resolution Quality Frame Rate (fps/CH) 80GB 120GB 160GB 200GB 300GB 30 39.4 58.1 79.3 97.4 145.7 15 82.0 120.8 165.0 202.7 303.0 Super Fine 7 166.9 245.9 336.0 412.8 617.0 30 60.4 89.0 121.6 149.4[...]

125 Recording time per HDD capacity (HR) TV System Record Mode Resolution Quality Frame Rate (fps/CH) 80GB 120GB 160GB 200GB 300GB 25 42.5 62.6 85.5 105.1 157.1 12 71.2 104.9 143.2 176.0 263.1 Super Fine 6 141.2 208.1 284.3 349.3 522.1 25 61.6 90.8 124.0 152.4 227.8 12 125.7 185.3 253.1 311.0 464.9 Fine 6 223.9 329.9 450.7 553.8 827.7 25 98.7 145.4[...]

126 Speco T echnologies , 200 New Highway Amityville, N.Y . 1 1701 T oll Free : 1-800-645-5516 In Metro NY : 631-957-8700 Fax:631-957-9142 or 631-957-3880 Web:w w w.specotech.com[...]