Sylvania 6900DTD manual

INSTRUCCIONES EN ESP AÑOL INCLUID AS. A TSC/NTSC STB 6900DTD As an E NERGY S TAR ® Partner, our company has determined that this product meets the E NERGY S TAR ® guidelines for energy efficiency. E NERGY S TAR ® is a U.S. registered mark. OWNER S MANUAL If you need additional assistance for set-up or operating after reading owner’s manual, p[...]

Ta b le of Contents 1 Before Using . . . . . . . . . . . . . . . . . 3 Important Safeguards . . . . . . . . . . . . . . . 3 Precautions . . . . . . . . . . . . . . . . . . . . . . 5 Information on digital broadcasting . . . . 6 Major features of STB . . . . . . . . . . . . . . 7 Location of controls . . . . . . . . . . . . . . . . 8 Accessories . .[...]

3 EN 1A23 1 Before Using 1.Read instructions- All the safety and operating instructions should be read before the appliance is operated. 2.Retain Instructions- The safety and operating instructions should be retained for future reference. 3.Heed W arnings -All w arnings on the appliance and in the operating instructions should be adhered to. 4.Foll[...]

4 EN 1A23 13.Outdoor Antenna grounding- If an outside antenna or cable system is connected to this product, be sure the antenna or cable system is grounded so as to provide some protection against voltage sur ges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFP A No. 70, provides information with respect to proper [...]

5 EN 1A23 1 Before Using AV OID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE This equipment has been tested and found to com- ply with the limits for a Class B digital device, pur- suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment gene[...]

6 EN 1A23 Before Using Digital broadcasting is the most advanced format of broadcasting, emplo ying a new technology for compression of audio and video signals which allows broadcasters to transmit digital signals using e xisting terrestrial systems. Due to this dramatic progress, new features of broadcasting service such as widescreen formats and [...]

7 EN 1A23 Before Using 1 Before Using • Capable of receiving digital (A TSC*), analog (NTSC*), and cable (NTSC) broadcasts • Capable of receiving High Def inition TV broadcasts • Capable of receiving Dolby® digital 5.1 audio • Alternate languages for OSD are av ailable. (English, Spanish, French) • Component video output jacks (Y/ Pb/ Pr[...]

8 EN 1A23 Before Using 1P O WER button: T urns STB on and off. 2P O WER indicator: Lights up while STB is on. NO TE: When turning the STB on, the power indicator will blink f irst and light up. When turning the STB off, the po wer indicator will blink first and go of f. 3R emote control sensor: Receiv es signals from your remote control and enables[...]

9 EN 1A23 Before Using 1 Before Using 1 ANT . IN Jack: Use to connect an antenna to STB. 2 DIGIT AL A UDIO (CO AXIAL) Jack: Use to connect a decoder or an amplifier to STB with a digital coaxial cable. NO TE: Y ou must use this jack and a Dolby® Digital receiv er for Dolby® Digital 5.1 playback. 3A U DIO R/ L Jacks: (2 pairs) Use to connect your [...]

1P O WER button: Tu rns STB on and of f. 2 Number buttons: Use to input channel numbers and passwords, and to set time. 3 ENTER button: In SETUP menu, press to determine your selection. 4 CH o / p b uttons: Press to change the channels up or down. 5N a vigation b uttons o / p / s / B : Press to mov e the highlight up, down, left or right. The video[...]

Y ou will find STB and the follo wing accessories when unpacking the carton box of STB: 1 Unsnap the battery cover fr om the back of the remote control. 2I nstall two AA batteries making sure the polarity (+ / -) direction is correct. NO TE: When replacing batteries, make sure to replace them in pairs. 3 Snap the battery cover bac k. CA UTION: • [...]

12 EN 1A23 Before Using SETUP WIZARD guides you through initial setup. " Create new setup" "K eep old setup" "SETUP" "QUIT" Q UIT SETUP : : SETUP WIZARD Language for screen (1/8) ( Refer to page 25 through page 29. ) Setting the clock (Manual) (5/8) ( Refer to page 27. ) Channel scanning (2/8) Setting the clo[...]

13 EN 1A23 Before Using 1 Before Using Adding channels / Deleting channels ( Refer to page 43, 46, 49, 51.) ( Refer to page 54, 56.) Adjusting antenna Receiving channels (Autoscan) Selecting screen formats (Screen ratio) Selecting screen formats (Display mode) CHANNEL QUIT CHANNEL DISPLA Y CLOCK DET AIL ADD/DELETE ANTENNA AUT OSCAN ADD/DELETE QUIT [...]

14 EN 1A23 Before Using Setting the clock (Daylight Savings Time) Setting the clock (T ime Zone) Setting the clock (Manual) Adjusting the clock automatically CLOCK QUIT CHANNEL DISPLA Y CLOCK DET AIL DST ON TIME ZONE CENTRAL MANUAL AUT O OFF 2002/ 1/31( THU ) 2 50PM CLOCK QUIT CHANNEL DISPLA Y CLOCK DET AIL Do you observe daylight saving time (DST)[...]

15 EN 1A23 Before Using 1 Before Using Setting for V -CHIP/CC Setting MP AA rating Setting TV rating Setting CC options Setting a new password DET AIL QUIT CHANNEL DISPLA Y CLOCK DET AIL V -CHIP / CC MENU LANGUA GE ENGLISH V -CHIP / CC QUIT CHANNEL DISPLA Y CLOCK DET AIL Enter password. Confirm password. V -CHIP / CC QUIT CHANNEL DISPLA Y CLOCK DET[...]

16 EN 1A23 Connections Use a standard antenna cable to connect the wall jack to the ANT IN Jack on STB. STB connection to the antenna Rear panel of STB To the antenna To the antenna WHEN CONNECTING T O CABLE BO X ALSO: NO TE: Antenna and antenna cable are not included. ANT . IN Incoming cable signals NO TE: Antenna, antenna cable and Cab le box are[...]

17 EN 1A23 Connections e.g .: Connection to VCR When you connect the antenna cab le to another device , be sure to use a splitter as shown below . CA UTION Right Splitter ANT . IN ANT . IN RF-IN RF-OUT e.g .: Connection to VCR STB Wrong RF-IN RF-OUT Antenna cable Antenna cables Antenna cables NO TE: Antenna, antenna cable and Splitter are not inclu[...]

18 EN 1A23 Connections There will be various w ays of connecting STB to other devices. Make your connection according to your choice of devices, screen format, and sound format. Y ou will find some sample connections in the follo wing pages. • All jacks on STB will not need to be connected. • When you change the connections, all devices should [...]

19 EN 1A23 Connections 1 Use a standard antenna cable to connect the wall jack to the ANT IN jack on STB. 2 Use a standard audio cable to connect the audio output jacks (L, R) of STB to the audio input jacks (L, R) on the TV . NO TE: If your TV is monaural (MONO) and has only one audio jack, use a standard audio cable (white) to connect the audio o[...]

20 EN 1A23 Connections 1 Use a standard antenna cable to connect the wall jack to the ANT IN jack on STB. 2 Use a standard audio cable to connect the audio output jacks (L, R) of STB to the audio input jacks (L, R) on the TV . 3 Use an S-video cable to connect the S-VIDEO output jack on STB to an S-video input jack on the TV . 4 Set the resolution [...]

21 EN 1A23 Connections 1 Use a standard antenna cable to connect the wall jack to the ANT . IN jack on STB. 2 Use a standard audio cable to connect the audio output jacks (L, R) of STB to the audio input jacks (L, R) on the TV . NO TE: If your TV is monaural (MONO) and has only one audio jack, connect a standard audio cable (white) from the audio o[...]

22 EN 1A23 Connections 1 Use a standard antenna cable to connect the wall jack to the ANT . IN jack on STB. 2 Use a standard audio cable to connect the audio output jacks (L, R) on STB to the audio input jacks (L, R) on the stereo. 3 Connect STB and the TV with a video cable. NO TE: Refer to the pages describing the connection to TV . 4 Set the vid[...]

23 EN 1A23 Connections 1 Use a standard antenna cable to connect the wall jack to the ANT . IN jack on STB. 2 Connect a coaxial digital audio cable (purchase locally) from DIGIT AL A UDIO (COAXIAL) output jack on STB to a coaxial digital audio input jack on the digital decoder . 3 Connect STB and the TV with a video cable. NO TE: Refer to the pages[...]

1 Use a standard antenna cable to connect the wall jack to the ANT IN jack on STB. 2 Use a standard audio cable to connect the set of audio output jacks (L, R) on STB to the set of audio input jacks (L, R) on the VCR. NO TE: If your VCR is monaural (MONO) and has only one audio jack, use a standard audio cable (white) to connect the audio output ja[...]

SETUP WIZARD SETUP WIZARD is the very con venient menu for you to make the initial settings of STB. When STB is turned on for the first time after connecting the A C power cord, SETUP WIZARD is displayed on the screen automatically . Y ou can complete the following items for the initial Setups through this menu. • Language for screen • Channel [...]

3 Select a desired language using o o / p p navigation b uttons, then press ENTER. • The selected language will be activ ated. • SETUP WIZARD 2/8 will appear . 4 STB starts scanning channels. • W ait until the scanning is complete. • When the scanning is complete, “100%” will be indicated in the box, then the next screen appears. To ski[...]

7 Select the desired time zone using o o / p p / s s / B B navigation b uttons, then press ENTER. • SETUP WIZARD 5/8 will appear . NO TE : Refer to “INFORMA TION on T ime Zones ” on page 61. 8 Enter YEAR, D A TE and TIME using o o / p p / s s / B B navigation b uttons or number b uttons. • Every time you enter a number , press ENTER to mov [...]

9 Press ENTER when the cursor is on SET . • Y our settings will be activ ated. • SETUP WIZARD 6/8 will appear, then STB will start searching channels with Automatic Clock Adjustments to keep the time correct. 10 Select the desired channel to sear ch from the c hannel map using o o / p p navigation b uttons. NO TE: The channel numbers with clock[...]

11 Press ENTER. • SETUP WIZARD 7/8 will appear . 12 Select the desired screen ratio using o o / p p navigation buttons, then press ENTER. • SETUP WIZARD 8/8 will appear . NO TE: Refer to “Selecting screen formats” on page 54 for further information. 13 Select the desired display mode using o / p navigation b uttons, then press ENTER. • SE[...]

30 EN 1A23 Basic Operation EN 1A23 EN 1A23 EN 1A23 EN 1A23 STB is capable of receiving analog (NTSC format) and digital (A TSC format) broadcasts. All av ailable channels from any of these broadcast sources can be tuned in using the CH o / p b uttons and number buttons on your remote control. Each channel number consists of a main channel number an[...]

When using number b uttons (E.g., entering 26-1): 1. Enter the main channel number, press the “ – ” b utton, then enter the sub-channel number . NO TE: Every channel number consists of a main channel and a sub-channel. Screen: TIP: When entering a 3-digit channel number , press the “+100” button f irst, then enter the main channel number [...]

When returning to the channel y ou were last watching: • STB will tune back in the channel you were last w atching. About sub-channel br oadcasting: There may be different programs being broadcast on sub-channels through a single channel from A TSC. Y ou can watch each sub-channel program being broadcast by selecting one of the sub-channels. NO T[...]

33 EN 1A23 Basic Operation 4 Basic Operation EN 1A23 EN 1A23 EN 1A23 The channel banner provides you with information on the channel you hav e selected. 1 Press INFO to display a c hannel banner . • Channel information will appear in the channel banner . Remote: Screen: 2 Press INFO to clear . NO TE: When tuning in a channel fr om NTSC: The indic[...]

34 EN 1A23 Basic Operation EN 1A23 EN 1A23 EN 1A23 Information icons DTV : NTSC: HD (High Definition): SD (Standard Definition): SD (Standard Definition): LOCK: CC (Closed Caption): V -CHIP/CC: Program title Program rating Program description Channel number : Indicates the current channel number . Logo for br oadcast source : Indicates whether the [...]

When the channel you are tuning in provides alternate audio formats and languages, you can change to any alternate. When you are tuning in A TSC, language and format can be set at the same time through an audio-map. A udio map: (Onl y when tuning in A TSC) Audio format and language outputs from a broadcasting station are stored in an audio-map. F o[...]

1 Press A UDIO b utton. Remote: When tuning in NTSC: The sequence will repeat as shown belo w when av ailable. Screen: When tuning in A TSC: The sequence will repeat according to audio-map when the A UDIO b utton is pressed. NO TE: O THER will be indicated when alternate languages are not English, Spanish, or French. 77-1 No description provided. E[...]

Y ou can stop the picture on the screen anytime by pressing STILL o b utton. 1 Press STILL o o bu tton while watching TV . • STILL will be indicated on the lower left while the picture is displayed. Remote: Screen: NO TE: During STILL, the programs audio will continue. 2 Press any b utton to quit. • The picture currently being broadcast will ap[...]

Some messages are displayed on the screen during channel changing or during programs. When STB cannot receiv e a channel signal, the whole screen becomes gray , then NO SIGNAL appears in the center . This may occur when: • the signal is too weak • the channel is not broadcasting • the antenna cable is not connected Screen: When STB is trying [...]

Electronic Program Guide (EPG) is an application for digital channels that lists current and scheduled programs that are or will be av ailable on each channel and a short summary or commentary for each program. EPG is the electronic equiv alent of a printed television program guide. Y ou can view a list of programs scheduled for from the next fe w [...]

2 Select the desired program using o o / p p / s s / B B navigation buttons. • The cursor will mov e as you press any navigation b utton. When viewing EPG for the next tw o hours up to the next se ven days: Press B navigation button. • EPG for the next two hours will appear . NO TE: By pressing B navigation b utton, EPG will move ahead. When go[...]

41 EN 1A23 Adv anced Operation 5 Adv anced Operation EN 1A23 EN 1A23 EN 1A23 EN 1A23 Information icons LOCK: Indicates that the current program is blocked according to your V -CHIP setting. CC (Closed Caption): Indicates that the program being broadcast is av ailable with closed captioning. Day of br oadcasting Channel numbers and digital broadcast[...]

42 EN 1A23 Adv anced Operation EN 1A23 EN 1A23 EN 1A23 EN 1A23 includes: • ADD / DELETE: Y ou can add or delete channels in the channel map. • ANTENNA: Y ou can verify and adjust the signal strength of each channel to get a clearer picture. • AU T OSCAN: Y ou can get available channels automatically into the channel map by completing A UTOSCA[...]

Y ou can add channels in the channel map. ADD: Y ou can add desired channels to the channel map. Once you add channels to a channel map, you will be allowed to select the channels in order using CH o / p b uttons. NO TE: When you add digital and analog channels with the same main channel number , you will need to add each channel. E.g., When adding[...]

2 Select CHANNEL using o o / p p navigation b uttons, then press ENTER. • CHANNEL menu will appear . 3 Select ADD/ DELETE using o o / p p navigation b uttons, then press ENTER. • ADD/ DELETE menu will appear . 4T o add, first enter the digital channel n umber 26-1. TIP: Y ou can enter simply 26 (main channel number) for a digital channel. NO TE[...]

5 Select ADD using o o / p p navigation b uttons, then press ENTER. • 26-1 will be added to the channel map. NO TE: Digital channels can be added only with main channel numbers. When the digital channel added to a channel-map has sub-channels, howe ver , the sub- channels can be selected using CH o / p b uttons. To continue adding: Repeat Steps 4[...]

Y ou can add and delete channels in the channel map. DELETE : Y ou can delete channels from the channel-map. NO TE: When you delete digital and analog channels with the same main channel number , you will need to delete each channel. NO TE: Once you delete channels from a channel-map, you cannot select those channels using CH o / p b uttons. E.g., [...]

3 Select ADD/DELETE using o o / p p navigation b uttons, then press ENTER. • ADD/ DELETE menu will appear . 4 Select DELETE using o o / p p navigation b uttons, then press ENTER. • The cursor will mov e to the channel map. ADD/DELETE QUIT CHANNEL DISPLA Y CLOCK DET AIL 13-0 ADD DELETE 26 25 22 13 ADD/DELETE QUIT CHANNEL DISPLA Y CLOCK DET AIL 1[...]

5 Select the digital channel number 26 using o o / p p navigation b uttons. • 26-1 will be indicated in the box at the top of the screen. TIP: When adding a channel number previously deleted, add the channel number by the steps in the ADD menu or renew the whole channel map with the AU T OSCAN menu. 6 Press ENTER when the cursor is on the digital[...]

Y ou can verify the signal strength of each channel to get a clearer picture for both digital and analog broadcasts. E.g., when adjusting the digital channel 26-1. 1 Select channel 26-1 to adjust using n umber button or CH o o / p p b uttons. • Channel 26-1 will be tuned in. Remote: Screen: or 2,6 3,4 1 3,4 1,5 ANTENNA Adjusting antenna 49 EN 1A2[...]

2 Press SETUP to display SETUP men u. • SETUP menu will appear . 3 Select CHANNEL using o o / p p navigation b uttons, then press ENTER. • CHANNEL menu will appear . 4 Select ANTENNA using o o / p p navigation b uttons, then press ENTER. • ANTENN A menu will appear , then STB starts receiving the signal strength of the channel. 5A djust the a[...]

51 EN 1A23 Adv anced Operation 5 Adv anced Operation EN 1A23 STB has the con venient function to get av ailable channels automatically . AU T OSCAN is capable of recei ving av ailable channels, both analog and digital, and storing those channels in a channel map. Channels once stored in a channel map can be selected using CH o / p b uttons. CA UTIO[...]

3 Select A UT OSCAN using o o / p p navigation b uttons, then press ENTER. • AU T OSCAN menu will appear . 4 Select NEXT using s s / B B navigation b uttons, then press ENTER. • Scanning window will appear , then STB will start scanning for all av ailable channels. NO TE: It will depend on the location, howe ver , it usually takes approximately[...]

To cancel AUT OSCAN during scanning: Press SETUP or ENTER to cancel. • AU T OSCAN CANCELLED will appear on the screen. CA UTION: If A UT OSCAN is cancelled during scanning, some channels not yet scanned may not be receiv ed. It is recommended to complete A UT OSCAN. 5A UT OSCAN is complete . • SETUP menu will go off automatically . • STB will[...]

STB allows you to select a screen ratio and a display mode (aspect ratio) to match the formats of the program being broadcast and your TV screen. Y ou can also change to aspect ratios you prefer to w atch. There are two screen ratios used in manufacturing TVs. These are standard TV format (4:3), and widescreen format (16:9). NO TE: Aspect ratio is [...]

3 Select SCREEN RA TIO using o o / p p navigation b uttons, then press ENTER. • Screen ratio options will appear . 4 Select the desired screen ratio using o o / p p navigation buttons, then press ENTER. • The screen ratio will be set. 5 Press ENTER to exit SETUP men u. NO TE: The screen ratio should be selected to fit your TV screen. Refer to t[...]

1 Press SETUP to display SETUP men u. • SETUP menu will appear . Remote: Screen: 2 Select DISPLA Y using o o / p p navigation b uttons, then press ENTER. • DISPLA Y menu will appear . DISPLA Y QUIT CHANNEL DISPLA Y CLOCK DET AIL SCREEN RA TIO 4:3 DISPLA Y MODE LETTERBOX SETUP QUIT CHANNEL DISPLA Y CLOCK DET AIL 1,5 2,3,4 2,3,4 DISPLA Y MODE 56 [...]

3 Select DISPLA Y MODE, using o o / p p navigation b uttons , then press ENTER. • Display mode options will appear . 4 Select the desired display mode using o o / p p navigation buttons, then press ENTER. • The display mode will be set. NO TE: Y ou can choose the display mode as you prefer . Refer to “INFORMA TION on Screen Ratio and Display [...]

INFORMA TION on Screen Ratio and Display Mode Letter Box Displays the entire picture image while fitting the picture to the screen by applying gray bars to the top and bottom of the screen. No information will be lost. Zoom Expands the picture image to fill the screen while cropping some images on the left and right. Picture information on the left[...]

59 EN 1A23 Adv anced Operation 5 Adv anced Operation EN 1A23 EN 1A23 EN 1A23 EN 1A23 EN 1A23 To get the EPG (Electronic Program Guide) and Channel banner , you need to set the CLOCK correctly . NO TE: The clock function is featured for displaying EPG so there may be 5 minute-time lag a day at the maximum. Therefore we recommend to set the Auto cloc[...]

3 Select Daylight Sa vings Time (DST) using o o / p p navigation b uttons, then press ENTER. • Daylight savings time setting menu will appear . 4 Select ON or OFF using s s / B B navigation b uttons, then press ENTER. • Daylight savings time will be set, then CLOCK menu will appear . 5 Select TIME ZONE using o o / p p navigation b uttons, then [...]

6 Select the desired time zone using o o / p p / s s / B B navigation b uttons, then press ENTER. • The TIME ZONE will be set, then CLOCK menu will appear . CLOCK QUIT CHANNEL DISPLA Y CLOCK DET AIL DST ON TIME ZONE CENTRAL MANUAL AUTO OFF 2002/ 1/31( THU ) 2 50PM ALASKA H AWAI I PACIFIC MOUNTAIN CENTRAL EASTERN A TLANTIC ALASKA: HA W AII: P ACIF[...]

7 Select MANU AL using o o / p p navigation b uttons, then press ENTER. • The current time setting menu will appear . 8 Enter YEAR, D A TE, and TIME using o o / p p / s s / B B navigation b uttons or number b uttons. • Press ENTER to set each value, then the cursor will mov e to the next. • When going back and forth, press s / B navigation b [...]

63 EN 1A23 Adv anced Operation 5 Adv anced Operation EN 1A23 EN 1A23 EN 1A23 EN 1A23 EN 1A23 9 Press ENTER when the cursor is on SET . • Y our settings will be activ ated. 10 Press SETUP to exit SETUP men u. CLOCK QUIT CHANNEL DISPLA Y CLOCK DET AIL DST ON TIME ZONE CENTRAL MANUAL AUTO OFF 2002/ 3/31( SUN ) 1 52PM Activated ST201UB.qxd 04.3.9 4:0[...]

STB is capable of adjusting the clock automatically using the channel clock data included in the signal from digital broadcast sources. In this menu, STB will search for channels with clock data, then select a channel to adjust the clock. STB will then adjust the clock using the channel selected. 1 Press SETUP to display SETUP men u. • SETUP menu[...]

3 Select A UT O using o o / p p navigation b uttons, then press ENTER. • Auto clock setting menu will appear , then STB will start searching for channels with clock data. When not using the auto-cloc k setting: Select OFF from the channel-map, then press ENTER . TIP: OFF is located at the top of the channel map. Keep pressing o na vigation button[...]

Y ou will need to change the 4-digit password to protect your V -CHIP/CC setting. “0000” has been stored as the default password. NO TE: Once the power supply is stopped due to the po wer f ailure or the unplugging AC po wer cord for approx. 5 seconds, the password will go back to the default password “0000. ” NO TE: Don’t for get your pa[...]

3 Select V -CHIP/CC using o o / p p navigation b utton, then press ENTER. • V -CHIP/CC password window will appear . 4 Enter the default passw ord “0000. ” • “ * ” will appear for each digit. After entering the default password, V -CHIP/CC menu will appear . V -CHIP / CC QUIT CHANNEL DISPLA Y CLOCK DET AIL V- CHIP / CC STB MP AA RA TING[...]

5 Select NEW P ASSWORD using o o / p p navigation b uttons, then press ENTER. • P assword setting menu will appear . 6 Enter a new 4-digit pass wor d in the upper space, then enter again in the lower space to confirm. 7V -CHIP/CC menu will appear . • Y our new passw ord is stored. 8 Press SETUP to exit SETUP men u. V -CHIP / CC QUIT CHANNEL DIS[...]

69 EN 1A23 Adv anced Operation 5 Adv anced Operation EN 1A23 EN 1A23 EN 1A23 EN 1A23 EN 1A23 In V -CHIP/CC menu, you will make some important settings for the viewing programs you select. First of all, you will need to set your 4-digit password for your V -CHIP setting. Then you can proceed with making your settings. STB incorporates V -CHIP techno[...]

1 Press SETUP to display SETUP men u. • SETUP menu will appear . Remote: Screen: 2 Select DET AIL using o o / p p navigation b uttons, then press ENTER. • DET AIL menu will appear . 3 Select V -CHIP/CC using o o / p p navigation b uttons, then press ENTER. • V -CHIP/CC password window will appear . V -CHIP / CC QUIT CHANNEL DISPLA Y CLOCK DET[...]

4 Enter y our 4-digit passwor d. • “ * ” will appear for each digit. After the correct password is entered, V -CHIP/CC menu will appear . 5 Select V -CHIP/CC using o o / p p navigation b uttons, then press ENTER. • V -CHIP/CC setting menu will appear . NO TE: To set V -CHIP/CC settings, choose STB. When choosing “STB” contr ols V -CHIP [...]

6 Select STB or TV using s s / B B navigation b uttons, then press ENTER. 7 Press SETUP to exit SETUP men u. V -CHIP / CC QUIT CHANNEL DISPLA Y CLOCK DET AIL V- C H IP / CC STB MP AA RA TING TV RA TING CC SELECTION OFF NEW P ASSWORD 72 EN 1A23 Adv anced Operation EN 1A23 EN 1A23 EN 1A23 EN 1A23 EN 1A23 ST201UB.qxd 04.3.9 4:04 PM Page 72[...]

The MP AA (Motion Picture Association of America) uses the standard movie ratings. 1,7 2,3,4,5,6 4 2,3,5,6 Age Label NR Not Rated by MP AA Description G General Audience PG Parental Guidance Suggested. Some material may not be suitable for children. NC-17 No one 17 and under admitted. Some material is intended to be viewed by adults only . X No one[...]

1 Press SETUP to display SETUP men u. • SETUP menu will appear . Remote: Screen: 2 Select DET AIL using o o / p p navigation b uttons, then press ENTER. • DET AIL menu will appear . 3 Select V -CHIP/CC using o o / p p navigation b uttons, then press ENTER. • V -CHIP/CC password window will appear . V -CHIP / CC QUIT CHANNEL DISPLA Y CLOCK DET[...]

4 Enter y our 4-digit passwor d. • “ * ” will appear for each digit. After entering the correct password, V -CHIP/CC menu will appear . 5 Select MP AA RA TING using o o / p p navigation b uttons, then press ENTER. • MP AA rating setting menu will appear . V -CHIP / CC QUIT CHANNEL DISPLA Y CLOCK DET AIL Set MP AA rating X NC-17 R PG-13 PG G[...]

76 EN 1A23 Adv anced Operation EN 1A23 EN 1A23 EN 1A23 EN 1A23 EN 1A23 6 Select PG-13 using o o / p p navigation b uttons, then press ENTER. E.g., when you want to bloc k all PG-13 movies: • Lock indicators will be added to programs rated PG-13 and abov e. NO TE: All movie programs rated PG-13 and abo ve will be blocked. When STB receiv es broadc[...]

(TV Parental Guidelines) TV rating allows parents to block out programs the y don’t w ant their children to see. TV rating consists of the age labels and the content labels. The following are the descriptions for each label: NO TE: When you block a particular rating or content label, all categories abo ve that will also be blocked. 1 2,3,4,5 2,3,[...]

1 Press SETUP to display SETUP men u. • SETUP menu will appear . Remote: Screen: 2 Select DET AIL using o o / p p navigation b uttons, then press ENTER. • DET AIL menu will appear . 3 Select V -CHIP/CC using o o / p p navigation b uttons, then press ENTER. • V -CHIP/CC password window will appear . V -CHIP / CC QUIT CHANNEL DISPLA Y CLOCK DET[...]

4 Enter y our 4-digit passwor d. • “ * ” will appear for each digit. After the correct password is entered, V -CHIP/CC menu will appear . 5 Select TV RA TING using o o / p p navigation b uttons, then press ENTER. • TV rating setting menu will appear . V -CHIP / CC QUIT CHANNEL DISPLA Y CLOCK DET AIL Set TV rating TV -MA TV -14 TV -PG TV -G [...]

To set age-based ratings: E.g., when you want to bloc k all TV -14 programs 1. Select TV -14 using o / p navigation buttons, then press ENTER. • Lock indicators will be added to all TV -14 and higher categories. NO TE: All TV -14 and higher programs will be blocked, along with all the labels of their possible contents. When STB receiv es broadcas[...]

Closed Caption (CC) provides you with on-screen text v ersions of the audio content for the program being broadcast. In this menu, you are allowed to turn Closed Caption signal On or Off, to set a language for the closed caption and to choose a format for the closed caption. NO TE: OFF has been selected as the default before purchase. 1 Press SETUP[...]

3 Select V -CHIP/CC using o o / p p navigation b uttons, then press ENTER. • V -CHIP/CC password window will appear . 4 Enter y our 4-digit passwor d. • “ * ” will appear for each digit. After the correct password is entered, V -CHIP/CC menu will appear . V -CHIP / CC QUIT CHANNEL DISPLA Y CLOCK DET AIL V- CHIP / CC STB MP AA RA TING TV RA [...]

5 Select CC SELECTION using o o / p p navigation b uttons, then press ENTER. • CC options menu will appear . 6 Select the desired CC option using o o / p p navigation buttons, then press ENTER. • The selected CC option will be set. 7 Press SETUP to exit SETUP men u. Use when Closed Caption is not desired. are the primary caption and text servic[...]

English, French, and Spanish are av ailable for the screen menu. Y ou can choose the language you prefer . NO TE: ENGLISH has been selected as the default before purchase. 1 Press SETUP to display SETUP men u. • SETUP menu will appear . Remote: Screen: 2 Select DET AIL using o o / p p navigation b uttons, then press ENTER. • DET AIL menu will a[...]

3 Select MENU LANGU A GE using o o / p p navigation b uttons, then press ENTER. • Language menu will appear . 4 Select the desired language using o o / p p navigation b uttons (E.g., select French), then press ENTER. • The selected language will be set, and the selected language will be indicated on screen. 5 Press SETUP to exit SETUP men u. DE[...]

86 EN 1A23 Appendix EN 1A23 EN 1A23 EN 1A23 EN 1A23 EN 1A23 EN 1A23 Symptom Remedy • Make sure that the AC po wer cord is securely plugged into the power outlet. • Make sure that STB is turned on. • Make sure to point the remote control unit at the remote control sensor . •Y ou may be too far from STB. Try mo ving closer . • Remov e any o[...]

87 EN 1A23 Appendix 6 Appendix and W arranty EN 1A23 EN 1A23 EN 1A23 EN 1A23 EN 1A23 EN 1A23 • Make sure that the audio cable is correctly connected. • Make sure that audio de vices (stereo, TV , decoder) are turned on. • Make sure that audio de vices (stereo, decoder) are correctly set to STB audio output channel. • Check the audio cable. [...]

Product STB for A TSC/NTSC Connecting Jacks ANT IN F connector (75 ohm) Video Output (component) 3-pin jack (Y , Pb, Pr) S-Video Output Mini DIN 4-pin jack (75 ohm) Video Output 1-pin jack, 1Vpp Analog A udio Output 2-pin jack (L, R) 450 mVrms (100k ohm) Digital A udio Output 1-pin jack (Dolby Digital) Po wer Source 120 V A C+/-10 %, 60 Hz+/-0.5 % [...]

89 EN 1A23 Appendix 6 Appendix and W arranty EN 1A23 EN 1A23 EN 1A23 EN 1A23 EN 1A23 EN 1A23 Digital audio (coaxial) output jack: Digital audio (coaxial) output jack send digital audio data to audio devices equipped with a digital audio (coaxial) input jack. Dolby® Digital: Dolby® Digital (when av ailable) provides 6 independent soundtrack channe[...]

90 ES 1A23 Guía para rápida consulta ES 1A23 ES 1A23 ES 1A23 ES 1A23 ES 1A23 ES 1A23 1 Botón PO WER: P ara encender y apagar el STB. 2 Indicador PO WER: Se ilumina cuando el STB está encendido. NO T A: Cuando se enciende el STB, el indicador PO WER primero parpadea y luego se ilumina de manera constante. Cuando se apaga el STB, el indicador PO [...]

91 ES 1A23 Guía para rápida consulta 7 Guía para rápida consulta ES 1A23 ES 1A23 ES 1A23 ES 1A23 ES 1A23 ES 1A23 ES 1A23 4B otones CH o / p : Presione este botón para cambiar de canal en dirección de ascenso o descenso. 5 Botones de navegación o / p / s / B : Presione estos botones para mov er el cursor hacia arriba, hacia abajo, hacia la iz[...]

92 ES 1A23 Guía para rápida consulta ES 1A23 ES 1A23 ES 1A23 ES 1A23 ES 1A23 ES 1A23 Conexiones de antena Use un cable de antena estándar para conectar la toma mural a la toma ANT IN del STB. Conexión del STB a la antena P anel trasero del STB A la antena A la antena AL CONECT AR EL EQUIPO A UNA CAJ A P ARA CABLE: NO T A: La antena y el cable d[...]

93 ES 1A23 Guía para rápida consulta 7 Guía para rápida consulta ES 1A23 ES 1A23 ES 1A23 ES 1A23 ES 1A23 ES 1A23 Conexión del STB a un SDTV utilizando la salida VIDEO P anel trasero del STB Cable de audio Cable de vídeo A las tomas de entrada de audio (L, R) A la toma de entrada de vídeo NO T A: El cable de audio y el cab le vídeo no vienen[...]

94 ES 1A23 Guía para rápida consulta ES 1A23 ES 1A23 ES 1A23 ES 1A23 ES 1A23 ES 1A23 ASISTENTE P ARA LA CONFIGURA CIÓN (SETUP WIZARD) El SETUP WIZARD es un práctico menú que le ayuda hacer los ajustes iniciales del STB. Cuando se enciende el STB por primera vez después de conectar el cable de alimentación de CA, el SETUP WIZARD aparece autom[...]

95 ES 1A23 Guía para rápida consulta 7 Guía para rápida consulta ES 1A23 ES 1A23 ES 1A23 ES 1A23 ES 1A23 ES 1A23 8 Introduzca el año (YEAR), fecha (D A TE) y hora (TIME) utilizando los botones de navegación o o / p p / s s / B B o los botones n uméricos. • Cada vez que introduzca un número, presione ENTER para mov er el cursor . • Si de[...]

Printed in China ST201UB 0EMN02308 ***** LIMITED W ARRANTY FUN AI CORP . will repair this SYL V ANIA product, free of charge in the USA in the e vent of defect in materials or w orkmanship as follo ws: DURA TION: PA R TS: FUNAI CORP . will provide parts to replace defecti ve parts without charge for one (1) year from the date of original retail pur[...]