Tascam CD-01UPro manual

OWNER’S MANUAL CD-01 U /CD-01UPro CD PLA YER D00864010A » ˛[...]

O Important Safety Pr ecautions 2 TASCAM CD-01U/CD-01UPro The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. The lightning flash with arrowhead symbol, within equilateral triangle, is intended[...]

O Important Safety Instructions TASCAM CD-01U/CD-01UPro 3 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with dry cloth. 7 Do not block any ventilation openings. Install in accor- dance with the manufacturer's instructions. 8 Do not inst[...]

O Safety Information Safety Information 4 TASCAM CD-01U/CD-01UPro This product has been designed and manufactured according to FDA regulations "title 21, CFR, chapter 1, subchapter J, based on the Radiation Control for Health and Safety Act of 1968", and is classified as a class 1 laser product. There is no hazardous invisible laser radia[...]

T able of contents 1 - Introduction Supplied accessories ..................................6 Environmental considerations .....................6 Some notes and precautions ..........................6 Beware of condensation .....................6 Back up memory .................................6 Rack - mounting the unit .......................7 Hand[...]

1 - Intr oduction ΠΠEnvironmental considerations Thank you for your purchase of the TASCAM CD- 01U/CD-01U Pro CD player. Before connecting and using the unit, please take time to read this manual thoroughly to ensure you under- stand how to properly set up and connect the CD- 01U/CD-01U Pro, as well as the operation of its many useful and conve[...]

1 - Intr oduction ΠΠEnvironmental considerations The CD-01U/CD-01U Pro have been designed for the playback of CD-DA format discs and MP3 files record- ed in ISO9660 format. In addition to ordinary 5-inch and 3-inch CDs, it can also play properly recorded CD-R and CD-RW discs. When removing a CD from its case, press down on the center of the dis[...]

2 - Remote contr ol unit Some notes and precautions ≠ When the remote control will not be used for an extended period of time, please remove the batteries to prevent the possibility of battery acid leakage which could damage the unit. Should leakage occur, remove and discard the bat- teries, and wipe the battery case thoroughly with a cloth. Avoi[...]

3 - Connections Before connecting the CD-01U/CD-01U Pro to other units, please read their operation manuals thoroughly to ensure proper connection. Turn the power on only after all connections have been made. Audio equipment Connecting analog audio equipment Connect analog stereo amplifiers, mixers and recorders to the analog line outputs. ≠ Conn[...]

4 - Featur es and their functions Front panel 1 POWER switch 2 Disc slot Insert CD into the slot, label side upwards. 3 Remote signal sensor 4 EJECT key Ejects a disc. This key cannot be used when Eject Block is on and disc is being played back. 5 Display The display is used to show the current status of the unit, as well as the current menu settin[...]

4 - Featur es and their functions Display 1 TRACK indicator 2 Track number display Shows the track number. In the menu mode, shows the menu number. 3 MP3 indicator Lights when a MP3 CD-ROM disc is inserted. 4 INDEX/DIR indicator Shows the index number (CD-DA) or directory number (MP3). 5 T and REMAIN indicators When the time mode is set to remain t[...]

1 ANALOG OUTPUT terminals The analog line output terminals are for RCA pin jacks. The maximum output level is +6 dBV. 2 DIGITAL (OPTICAL) OUTPUT terminal Provides the digital audio signal in S/PDIF format. This connector outputs the 44.1KHz digital signals constantly even if pitch control is activated. 3 CONTROL I/O (RS-232C) connector This RS-232C[...]

4 - Featur es and their functions 5 PITCH key +/- keys Use these keys to perform the pitch control function. 6 KEY ORIG key This turns the Key Original function on and off. 7 A.CUE/DEL key Sets the Auto Cue level. During program input, the selected program number track is deleted. 8 A.RDY/INS key Turns the Auto Ready function on and off. During pro[...]

14 TASCAM CD-01U/CD-01U Pro 5 - Menu operation The various settings and editing operations possible with the CD-01U/CD-01U Pro are performed through menu options shown on the display. Among the many menu setting options, some may be made directly using the keys on the remote control. No. Menu Function Parameter Manual reference Page Underlined valu[...]

CDs containing MP3 files can be played by the CD- 01U/CD-01U Pro with the following limitations on the number of files and directories. Maximum number of directories: 254 Maximum number of MP3 files: 255 File format: MPEG 1 audio layer 3 Bit rate: 32kbps to 320kbps Sampling frequency: 44.1KHz, Stereo File extension: mp3, Mp3, mP3, MP3 The CD-01U/CD[...]

Plug the headphone cord into the PHONES jack. Adjust the volume with the volume control. When using headphones, take care not to turn the vol- ume too high. Listening at high volumes for extended periods of time may result in permanent hearing dam- age. 16 TASCAM CD-01U/CD-01UPro 6 - Playback Playback modes There are four different playback modes. [...]

6 - Playback Selecting by track number Using the number keys on the remote control, the num- ber of the desired track can be entered directly. Even numbers with two (Audio CD) or three (MP3) digits can be entered easily. For example: Track 9 (Audio CD): press 0 then press 9. Track 9 (MP3): press 0, 0, and 9. Search During playback or playback stand[...]

7 - Advanced operations Auto Cue When the Auto Cue function is turned on and a track is selected, the point where sound begins (not where the track begins) on that track is located to and the unit enters pause mode. When the ¥ key is pressed, playback begins at exactly that point. Auto Cue is not supported for MP3 playback. During stop mode, to cu[...]

7 - Advanced operations Press the REPEAT key on the remote control to turn on the repeat mode. In this mode, all the tracks on the disc are played continuously. During playback, if the repeat mode is turned on, play- back continues as before, and when the last track fin- ishes, playback resumes from the first track. If repeat mode is turned on when[...]

By using an external timer, you can set the CD- 01U/CD-01U Pro to play the loaded disc automatically when the unit is turned on by the timer. 1 First, plug the power cord of the CD-01U/CD-01U Pro into the power outlet of the timer. 2 Load a CD into the unit. 3 Set the TIMER menu (menu number 07 TIMER) to on. 4 Set the timer to the desired time. Con[...]

7 - Advanced operations 1 Enter the program mode. 2 Use the SEARCH keys to select the track for editing. Also using the PITCH knob on the front panel to select the track for editing. The track number will be shown in the display. 3 Use the number keys or SKIP keys on the remote control or SKIP keys on the front panel to edit the programmed track. 4[...]

When this function is on and CD playback begins, the song fades in. When playback is finished, the song fades out. The length of the fade in/out to/from the normal level can be set between 0.5 and 10 seconds in 0.5 second increments (Default setting: OFF). 1 To set the fade operation, enter the fade menu (menu number 05 FADE). 2 Press the PITCH kno[...]

TASCAM CD-01U/CD-01UPro 23 Time display switching Fader start/Event start End of track war ning (EOM) Eject block Fader start/stop 7 - Advanced operations During audio CD playback (or playback standby), when the DISPLAY key on either the front panel or the remote control is pressed, the time display will switch through several modes in the followin[...]

Exter nal parallel contr ol Restoring factory default settings 7 - Advanced operations The CD-01U Pro can be controlled from an external devices which supports a parallel interface via the CON- TROL I/O terminal on the rear panel. Pin No. Description In/Out 1 Stop tally Out 2 Skip (Back) In 3 Skip (Forward) In 4 No Disc tally Out 5 EOM tally Out 6 [...]

8 - Specifications Type Compact Disc player Discs 8 or 12cm (3.1 to 4.7inch) CD, CD-R/CD-RW Formats Audio CD (CD-DA), MP3 Number of channels 2-channel Resolution 16-bit Sampling frequency 44.1kHz Analog line outputs Connectors RCA Maximum Output level +6 dBV dBu Output impedance 1k Ø Analog line outputs (CD-01U PRO only) Connectors XLR-3-32 (1:GND[...]

8 - Specifications Dimensional drawing Error messages Err 01 TOC Read error - the disc's Table of Contents cannot be read - try with another disc or remove and clean the existing disc before replacing it Err 02 GFS error GFS signal cannot be detected - try with another disc or remove and clean the existing disc before replacing it Err 03 Focus[...]

CD-01U/CD-01UPro 27[...]

TEAC CORPORA TION Phone: +81-422-52-5082 www.tascam .com 3-7-3, Nakacho, Musashino-shi, Tokyo 180-8550, Japan TEAC AMERICA, INC. Phone: +1-323-726-0303 www.tascam.com 7733 Telegraph Road, Montebello, California 90640 TEAC CANADA LTD. Phone: +1905-890-8008 Facsimile: +1905-890-9888 www.tascam.com 5939 Wallace Street, Mississauga, Ontario L4Z 1Z8, Ca[...]