Topfield TF 600 PVRc manual

T OPFIELD TF 600 PVRc User Guide Digital Cable Receiv er P ersonal Video Recorder CONAX[...]

[...]

Contents iii Contents 1 Introduction 1 1.1 Features ............................... 1 1.2 Controlling the digital r eceiver .................. 2 1.2.1 The front panel ....................... 3 1.2.2 The remote contr ol ..................... 4 1.3 What is common interface? .................... 7 2 Setup 8 2.1 Unpacking ..............................[...]

iv Contents 3 Preference Settings 17 3.1 Language settings .......................... 1 7 3.2 V ideo and audio settings ...................... 1 9 3.2.1 T elevision standard .................... 1 9 3.2.2 Colour model ........................ 1 9 3.2.3 V ideo cassette recor der .................. 2 0 3.2.4 T elevision aspect ratio .................[...]

Contents v 5.4 W atching multifeed programme ................. 3 6 5.5 Using time shift ........................... 3 6 5.6 Using picture in pictur e ...................... 3 8 6 Listing Services 39 6.1 Editing the favourite list ...................... 3 9 6.2 How to use on-screen keyboar d .................. 4 1 6.3 T ransferring receiver data ...[...]

vi Contents 7.3.7 T o play back a scrambled recor ding ........... 5 6 7.4 Copying a recor ding ........................ 5 7 7.5 MP3 playback ............................ 5 7 7.6 T ransferring recor ding files .................... 5 8 7.7 Formatting the hard disk ...................... 6 0 8 Accessing to The Digital Receiver via The Internet 61 8.[...]

1 Chapter 1 Introduction The TF 600 PVRc digital receiver is fully compliant with the international Digital V ideo Broadcasting (DVB) standar d, and thus is able to receive digital br oadcasts of that standard. NOTE In general we equate a channel with a frequency . Unlike ana- logue broadcasts, however , digital broadcasts are not all as- signed to[...]

2 Introduction • Y ou can view information about the current television or radio programme. • Has an electronic pr ogramme guide that provides an overview of scheduled programmes. • Y ou can update the firmware of the digital r eceiver to the latest version which would be provided by the manufac- turer . • Y ou can recor d one broadcasting[...]

1.2 Controlling the digital receiver 3 1.2.1 The front panel The front panel of the digital r eceiver has buttons to control the digital receiver , and specific lamps and a display to indicate its status. The following indicates what they mean. CHANNEL VOLUME OK MENU ST ANDBY button switches the digital receiver between standby mode and operation [...]

4 Introduction 1.2.2 The remote control 1 2 3 3 4 5 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 1  button switches the digital receiver between standby mode and operation mode. 2  is used to set a sleep timer . 3  , buttons decrease or incr ease the volume. They are also used to change valu[...]

1.2 Controlling the digital receiver 5 13  displays teletext. 14      V .F or mat changes video resolution. See § 3.2.5 for more details. 15      A/R changes aspect ratio. See § 3.2.4 for more details. 16  switches between television services and radio ser- vices. 17      GUIDE displays the elect[...]

6 Introduction 28  is used to start fast motion playback. Subsequent presses incr ease the playback speed. 29  is used to start slow motion playback. Subsequent presses change the playback speed. 30  changes the position of sub-picture counter clockwise. It is also used to jump back to beginnng of recor ding during a playback. 31  chang[...]

1.3 What is common interface? 7 1.3 What is common interface? Some broadcasts ar e scrambled so that only paid subscribers can enjoy them. Scrambled services can only be viewed with a Conditional Access Module (CAM) and a subscription card belong- ing with the scrambling system. Common Interface (CI) is the slot on a digitial receiver into which a [...]

8 Setup Chapter 2 Setup 2.1 Unpacking Before going any further , check that you have r eceived the following items with your digital receiver . • Remote control unit • T wo batteries for the remote control (AAA 1.5 V) • A copy of this user guide NOTE Accessories may vary according to your local ar ea. 2.2 Safety precautions Please read car ef[...]

2.2 Safety precautions 9 • The wall outlet should be near the equipment. Do not run an extension lead to the unit. • Do not expose the digital receiver to any moistur e. The digital receiver is designed for use indoors only . Use dry cloth when cleaning the digital receiver . • Place the digital receiver on a firm and level surface. • Do n[...]

10 Setup 2.3 Rear panel connections The TF 600 PVRc has a wide range of connections on the back. USB CABLE 1 IN CABLE 1 OUT CABLE 2 OUT AUDI O VIDE O S-VI DEO CABLE 2 IN L R TV VCR S/PD IF 1 2 3 4 5 6 8 9 10 11 13 12 WLAN ANT RS-232 14 HDMI 7 Check what connections your television set has in comparison with the digital receiver . 1  CABLE 1 IN C[...]

2.4 Connecting up your digital receiver 11 9  TV Audio and video output socket for the televi- sion set. 10  VCR Audio and video input/output socket for the video cassette recor der or suchlike. 11  HDMI Audio and video output socket for the high definition television set. 12  WLAN ANT Antenna for wireless local ar ea network. See Chap[...]

12 Setup If you have any problem with your setup or need help, contact your dealer . 2.4.1 Connecting to the broadcasting cable Whatever sort of connection you have be- tween the digital receiver and the television, you need to connect the digital receiver to the broadcasting cable so that it can r eceive digital television services. Connect the br[...]

2.4 Connecting up your digital receiver 13 Y ou should configure audio and video settings after connecting up the digital receiver . See § 3.2 for detailed description. T o use the HDMI connector If you have a high definition television set, you should use a HDMI cable for best re- sults. Plug one end of the cable into the HDMI socket on the dig[...]

14 Setup T o use the S-V ideo connector NOTE Y ou cannot view high definition video with the S-V ideo connector . Y ou will need to obtain a S-V ideo cable to use the S-V ideo connector . Plug one end of the cable into the S-VIDEO socket on the digi- tal receiver , and plug the other end into the matching socket on your television. T o use the com[...]

2.5 Switching on for the first time 15 T o enjoy Dolby digital audio, your televi- sion or audio system must be able to decode Dolby digital audio, and you will need to obtain a S/PDIF cable. Plug one end of the cable into the S/PDIF socket on the digi- tal receiver , and plug the other end into the matching socket on your audio system. 2.4.3 Conn[...]

16 Setup used batteries. The manufactur er accepts no liability for the damage resulting fr om leaking batteries. NOTE Batteries, including those which contain no heavy metals, may not be disposed of with household waste. Please dispose of used batteries in an environmentally sound manner . Find out about the legal regulations which apply in your a[...]

17 Chapter 3 Preference Settings 3.1 Language settings Y ou can select the language in which the menu would be dis- played. In addition to that, you can select which language of au- dio track and of subtitle track should be output. Select the System Setting > Lan- guage Setting menu. Y ou should see a screen like the left figur e. Menu language[...]

18 Preference Settings Subtitle language Set the 1st Subtitle Language option and the 2nd Subtitle Lan- guage option to your desired languages. When you watch a programme, if the pr ogramme has a subtitle track of the lan- guage that is designated for the 1st Subtitle Language , it will be displayed. If the first language is not available but the [...]

3.2 V ideo and audio settings 19 3.2 V ideo and audio settings Y ou have to configure the video and audio settings appropriately to your television set and other appliances. Select the System Setting > A/V Output Setting menu. Y ou should see a screen like the left figure. 3.2.1 T elevision standard The digital receiver supports two television[...]

20 Preference Settings digital receiver linked to your television via this connector , you should set the SCART Output option to your desired colour model. If you have connected via the RCA connector labeled VIDEO on the back panel, you do not have to set this option because the digital receiver outputs CVBS video thr ough the RCA connector indepen[...]

3.2 V ideo and audio settings 21 Y ou can enjoy well both wide-screen pr ogrammes and normal- screen pr ogrammes with your wide-screen television as the above figures show . T o watch normal-screen pr ogrammes in full screen like the left figur e, set the 4:3 Display F or mat option to Full . Normal-screen pictur es then will be inflated to fit[...]

22 Preference Settings 3.2.5 High definition television The digital receiver supports various video r esolutions from 576 to 1080. In general a resolution of 720 or mor e is considered high definition. The higher the resolution is, the better quality you can enjoy . However , if your television set does not sup- port high definition, you cannot [...]

3.3 Local time setting 23 3.3 Local time setting Y ou should set your local time for timer events. Select the System Setting > Time Setting menu. Y ou should see a screen like the left figur e. Y ou can set the clock manually or use the time signal, Green- wich Mean T ime (GMT), carried as part of the digital television broadcast. T o use Green[...]

24 Preference Settings T able 3.1: T ime offset table Time offset City GMT − 12:00 Eniwetok, Kwajalein GMT − 11:00 Midway Island, Samoa GMT − 10:00 Haw aii GMT − 09:00 Alaska GMT − 08:00 Pacific Time US , Canada GMT − 07:00 Mountain Time US, Canada GMT − 06:00 Central Time US, Canada, Me xico City GMT − 05:00 Easter n Time US, Cana[...]

3.4 Parental control 25 Select the System Setting > P arental Control menu. Y ou should see a screen like the left figure, and you will be asked your Personal Identifica- tion Number (PIN). The number is initially set to ‘0000’. If you wish to block 15 or above rated programmes, set the Censorship option to 15 (age) . Setting it to No bloc[...]

26 Preference Settings 3.5 Adjusting the on-screen display Y ou can adjust the transparency level of the on-scr een display . Select the System Setting menu and set the OSD T ransparency option as you desire. Its available range is from 0 to 50 per cent. Y ou can adjust the display time of the information box. For the information box, see § 5.2.3 [...]

27 Chapter 4 Service Search After connecting up the digital receiver , you will need to per- form a service search. 4.1 Searching broadcasting services T o perform service search, select the Installation > Ser vice Search menu. Y ou should see a screen like the left figure. Y ou should set the Search Mode option to A uto at the first service s[...]

28 Service Search quency option. Symbol Rate stands for data transfer rate, and QAM is a form of modulation used in digital broadcasting. Broadcasting operators send their services in a symbol rate by a modulation method. Perhaps you do not have to specify the Symbol Rate and QAM Mode options since they are seldom changed. However , you should set [...]

4.3 Clearing the services list 29 Y ou can reset all data of the digital r eceiver . T o do that, select the Installation > F actor y Setting menu, and then you are asked for confirmation. If you select Y es , service entries, favourite entries and timer events will all be deleted, and preference options will be reset to the manufactur er ’s [...]

30 Daily Usage Chapter 5 Daily Usage 5.1 V olume control Use the and buttons to alter the volume to a comfortable level. Y ou may need to adjust the volume on your television set too. T o temporarily switch off the sound, pr ess the button. Press it again to r estore the sound to previous level. 5.2 W atching television T o change services, press t[...]

5.2 W atching television 31 On the services list, you can see the service information: • Service number and name • T ransponder information A dollar sign ( $ ) may be marked on some entries, indicating pay service. T o watch pay services, you need the subscription card. T o select a desired service, put the highlight bar on its entry with the o[...]

32 Daily Usage • T o add the highlighted service into a favourite group, select the Add to F av option; then the favourite groups will be displayed. Put the highlight bar on a desir ed group and pr ess the     OK button. 5.2.2 The favourite services list Y ou can select a service to watch on a favourite list as well as on the services[...]

5.2 W atching television 33 group, put the highlight bar on a desir ed group and press the     F3 button. T o create a new gr oup, press the     F2 button; then the on-screen keyboar d appears. Enter your desir ed name and save it. See § 6.2 for how to use the on-screen keyboar d. T o delete a group or a service, pr ess the[...]

34 Daily Usage When you are not using time shift, if the electr onic programme guide is provided on the curr ent service, you can see the infor- mation about the current and next pr ogrammes with the or button. T o adjust the sound volume in this case, hold down the or button until the sound bar appears and reaches your desired level. Pressing the [...]

5.3 V iewing electronic programme guide 35 Select a desired page to view by entering its page number with the numeric buttons. Y ou can zoom into a teletext page with the     F3 button, and adjust its transparency level with the     F4 button. T o hide the teletext screen, press the     EXIT button. 5.3 V iewing [...]

36 Daily Usage 5.4 W atching multifeed programme Some broadcasts such as sports channels can pr ovide a variety of perspectives on a programme at a same time. W e call it a multifeed programme. Y ou can select and watch a perspective you prefer . If a multifeed programme is pr ovided on the current service, the multifeed symbol ( ) will be marked o[...]

5.5 Using time shift 37 W ith time shift enabled, the following operations are possible: • T o go back in time, hold down the button; to go for- ward, hold down the button. The pr ogress bar is displayed momentarily with a preview window . • Y ou can navigate using the progress bar , refer to § 7.3.1 . • Y ou can jump forward 30 seconds at a[...]

38 Daily Usage 5.6 Using picture in picture Y ou can watch two services at the same time with one of them presented in a sub-pictur e. W e call this feature pictur e-in- picture. The instructions on how to use the picture-in-pictur e feature are as follows: 1. Press the     F1 button to display a sub-picture, on which another service wi[...]

39 Chapter 6 Listing Services 6.1 Editing the favourite list Y ou can make your own favourite services list. In fact, you can define multiple favourite services lists, each being a ‘group’ of chosen services. Select the Organizing F av or ites menu. Y ou should see a screen like the left figure. There ar e three columns: • Group list (left)[...]

40 Listing Services Y ou can add up to 30 groups. T o add a group, select the NEW option in the group list; then the on-scr een keyboard appears. See § 6.2 for how to use the on-screen keyboar d. T o rename a gr oup, put the highlight bar on the group entry you want and press the     F2 button; then the on-screen keyboard appears. See [...]

6.2 How to use on-screen keyboard 41 6.2 How to use on-screen keyboard Y ou can move the highlight key horizontally with the and buttons and vertically with the and buttons. Pressing the     OK button on a key enters its let- ter in the input line. T o type a space, select the Space key . T o type lower case letters or numer- als, selec[...]

42 Listing Services 1. Plug one end of a RS-232 cable (9 pin D- sub cable) into the RS-232 port on the dig- ital receiver , and the other end into the matching port on the other digital receiver . 2. T urn on the source digital receiver . 3. Select the Installation > T ransf er Fir mware > T ransf er Data to Other IRD menu, then you get asked[...]

43 Chapter 7 Recording and Playing Y ou can recor d two different services while watching another if two of the services are pr ovided through the same transponder The TF 600 PVRc digital receiver has two tuners so that you can enjoy the following: • While playing a recor ding back, you can watch a service in the sub-picture using the pictur e-in[...]

44 Recording and Playing 7.1 Recording a programme Once recor ding has started, a symbol like the left figure will be displayed at the top right of the scr een for a few seconds. When you are watching a service dif ferent from the service being r ecorded, you can view a number on the centre of the symbol, which indicates the order that the recor d[...]

7.1 Recording a programme 45 Pressing the button will pause the live show and begin time shifting within the current recor ding even with the Time Shifting option disabled. How- ever , it is still possible to pause a recor ding. After a recor ding is started, pressing the but- ton displays a menu like the left figure, in which you can set the reco[...]

46 Recording and Playing T o stop recor ding, press the button; then a box like the left figure appears, which shows programmes curr ently be- ing recor ded. If you select one, its recor ding will stop. While a recor ding is going on, you can watch or recor d another service. T o additionally recor d another service, switch to the service you want[...]

7.1 Recording a programme 47 T o input a timer recor ding, select the Timer Setting menu; then the timer list will be displayed. T o add a new timer event, press the     F1 button, and a box like the left figure appears. T ake the following steps: 1. Set the Record option to On to make a recor ding. If this option is set to Off , the d[...]

48 Recording and Playing 5. Set the Date option to a desired date, on which the digital receiver will turn on. The date format is day/month/year- day of the week . Set the Star t Time option to a desired time, at which the recor ding will be started. The time format is hour:minute . 6. Set the Duration option to a desired time, in which the recor d[...]

7.1 Recording a programme 49 7.1.3 Scheduling recordings using the programme guide If the electronic pr ogramme guide is properly pr ovided, you can make timer events on it. The instructions on how to make timer recor dings using the elec- tronic pr ogramme guide are as follows: 1. Press the     GUIDE button to display the electronic pr[...]

50 Recording and Playing 1. Press the button to display the progr ess bar. 2. T o move to the beginning of the desired scene, hold down the or button until it is reached. 3. Press the button to start recor ding. The time shift buffer fr om that position onwards will now be recor ded. 4. Press the button to stop time shift. 5. Press the button once [...]

7.2 File archive 51 7.2 File archive When a programme is r ecorded, it is stored as a file on the built-in hard disk drive of the digital r eceiver . Y ou can select a recor ding to play back from the recor ded programme list. Select the File List menu or alter- natively press the button to display the recor ded programme list. The file informati[...]

52 Recording and Playing 7.2.3 T o lock a recording T o lock a recor ding so that other people cannot play it, perform the following steps: 1. Put the highlight bar on a desired recor ding. 2. Press the     F4 button to display the additional options. 3. Set the Lock option to Lock ed . 4. Press the     EXIT button. 5. The l[...]

7.3 Playing back a recording 53 7.3 Playing back a recording When a programme is r ecorded, its additional contents such as audio tracks or teletext are also r ecorded together . So you can enjoy them while playing back a recor ding. The instructions on how to play a recor ding are as follows: 1. Select the File List menu or alternatively press the[...]

54 Recording and Playing • T o go forward, hold down the button; to go backward, hold down the button. • T o bookmark a position, refer to § 7.3.4 . • If there ar e no bookmarks, you can jump forward 30 seconds at a time by pressing the     F3 button. • T o jump back to beginning of recor ding, pr ess the button. • T o jump t[...]

7.3 Playing back a recording 55 7.3.4 T o make a bookmark Y ou can mark favourite parts of a recor ding by creating book- marks, and then jump to them. Y ou can have up to 64 book- marks. Bookmarks are stored with the recor ding so that you can use them again afterwards. T o make bookmarks, perform the following steps during play- back: 1. Press th[...]

56 Recording and Playing 2. Move to the beginning scene of the part you want to play repeatedly by holding down the or button. 3. Press the button, then the pointer starts to blink. 4. Move to the end scene; the part is marked in purple. 5. Press the button again, then the part turns green, and repeated playback starts. 6. T o cancel it, press the [...]

7.4 Copying a recording 57 On the recor ded programme list, a purely gr een $ indicates the recor ding has been wholly descrambled; on the other hand, a yellowish green $ indicates it has been partially descrambled, and a purely yellow $ indicates it has not been descrambled at all. Refer to § 7.1.5 for how to recor d a pay service programme. 7.4 [...]

58 Recording and Playing 2. Put the highlight bar on a desired file; if you want to play several files, select them with the     F1 button. 3. Press the     OK button to start playback. 4. T o stop playback, press the button. T o play all MP3 files in a subfolder , put the highlight bar on a desired folder , and press the[...]

7.6 T ransferring recording files 59 The instructions on how to use Altair are as follows: 1. Select files to transfer . The left panel shows files and folders that are on the digital r eceiver , while the right panel shows files and folders that are on your computer . 2. T o transfer files from the digital r eceiver to your com- puter , press[...]

60 Recording and Playing V isit http://www.videolan.org or http://www.elecard.com where you can find a MPEG player able to play them back. If you wish to author DVDs with them, visit http://www. haenlein- software.com where you can find a DVD authoring program able to pr ocess them. 7.7 Formatting the hard disk Y ou can delete all contents stored[...]

61 Chapter 8 Accessing to The Digital Receiver via The Internet NOTE The following section describes complex functions that should only be used by owners with advanced computer knowledge. TF 600 PVRc provides a web service and FTP service. Y ou can make scheduled recor dings or download recording files to your computer via these services. Here you[...]

62 Accessing to The Digital Receiver via The Internet NOTE The web server and FTP server of the digital receiver don’t work in standby mode. So it must be powered up all the time if you wish to use the web service at any time. 8.1 Configuring the router In this section, the setup program of WR T54G , which is a router manufactured by Linksys , w[...]

8.1 Configuring the router 63 8.1.2 T o access on the level of the Internet When you are away fr om home, you can access the digital receiver inside your home if your r outer is configured to route access to the digital receiver by means of port forwar ding. V ia this feature, your router will lead you to the digital r eceiver when you access you[...]

64 Accessing to The Digital Receiver via The Internet 1. Make an account on a web site providing DDNS service, which should be supported by your router . 2. Configure your r outer with the account so that it can communicate with the web site. Whenever a new dynamic IP address is assigned to the r outer , it will inform the DDNS service provider of[...]

8.2 Configuring the wireless network settings on the digital receiver 65 8.2 Configuring the wireless network settings on the digital receiver Y ou should configure the WLAN settings to enable the web service and FTP service. Y ou had better refer to the manual of your router for understanding of technical terminology . NOTE Y our router should [...]

66 Accessing to The Digital Receiver via The Internet NOTE Y ou can access the FTP server with an anonymous account. However , with an anonymous account you can only download files. Y ou cannot upload files. Advance configuration T o configure the network envi- ronment for the digital r eceiver in detail, select the Installation > LAN Settin[...]

8.2 Configuring the wireless network settings on the digital receiver 67 Profile T o make profiles for various net- work connections, select the In- stallation > LAN Setting > Pro- file menu. The value of the Country Region option is applied to every profile in common. It is not possible to specify this option differ ently per profile. [...]

68 Accessing to The Digital Receiver via The Internet T o view or edit a profile, choose your desired pr ofile at the Profile Name option and select the Edit Profile item. A profile consists of several op- tions. The available values of each option are as follows: Channel : 1 to 14 depending on the value of the Countr y Re- gion option only if[...]

8.3 Accessing the web server 69 8.3 Accessing the web server In way of the web server of the digital receiver , you can do the following: • Download recording files. • Create new recor ding timers. • V iew information about the programme curr ently being recor ded. • V iew the system information of the digital receiver . NOTE It is recomme[...]

70 Accessing to The Digital Receiver via The Internet Y ou cannot only download but also upload recor ding files or MP3 files in the File Management page. However , if you wish to download or upload a file of which size is 2 gigabyte or more, it is r ecommended to use the FTP server rather than the web server . NOTE The maximum number of user co[...]

8.4 Accessing the FTP server 71 8.4 Accessing the FTP server Y ou need an FTP client program to access the FTP server of the digital receiver . Y ou can log into the FTP server with the user name and pass- word specified in the WLAN Setting menu. For how to config- ure the WLAN settings, r efer to § 8.2 .[...]

72 Accessing to The Digital Receiver via The Internet NOTE The maximum number of user connections is only one. This means that you cannot access the FTP server while someone else is occupying it.[...]

73 Chapter 9 T opfield Application Program If you are good at pr ogramming with C++ language, you can make a program executable to run on the digital r eceiver . W e call this a T opfield Application program (T AP). In mak- ing a T AP , it is recommended to use Diab compiler of Wind River , whose web site address is http://www.windriver.com . Som[...]

74 T opfield Application Program T o run a T AP in the digital receiver , perform the following steps: 1. Press the button and then the or button to display the program file list. 2. Place the highlight bar on a file entry you want to run. 3. Press the     OK button to start the program. 4. T o exit the program, press the   [...]

75 Chapter 10 Firmware Update The digital receiver has a stable and convenient firmwar e to use. However , a new firmware may be released to impr ove the digital receiver . Y ou can get the latest firmware and an update utility which runs on most versions of W indows from the T opfield web site, http://www.i- topfield.com . 10.1 Checking the ?[...]

76 Firmware Update NOTE Y ou can only update with firmwares of which system identifi- cation is identical to that of yours. Otherwise you will fail in firmware update. 10.2 From the network via LAN port Y ou can get a new firmware fr om the network via LAN port. Select the Installation > LAN Set- ting > IP Configuration menu. Y ou should[...]

10.3 From your computer via USB port 77 4. When you turn on the digital reciever , the latest firmware will be updated automatically . If your r eceiver has the latest firmware, the firmwar e update will be skipped. 10.2.2 Manual firmware update via LAN port T o update the firmware manually , follow the steps below: 1. Plug a LAN calbe into th[...]

78 Firmware Update 1. Press the Find button to select the new firmware file. 2. Press the do wnload button, and then restart the digital r eceiver to start the file transfer . 3. A countdown will be displayed on screen 4. Restart the digital receiver once more when the file transfer is com- plete. 10.4 From your computer via RS-232 port It is p[...]

10.5 From another digital receiver via RS-232 port 79 1. Press the Find button to select the new firmware file. 2. Press the do wnload button, and then turn on the digital receiver to start the file trans- fer . 3. A countdown will be displayed on screen 4. Restart the digital receiver when the file transfer is complete. 10.5 From another digit[...]

80 INDEX Index 16:9 , 20 16:9 Display F ormat , 21 1st Audio Language , 18 1st Subtitle Language , 18 2nd Audio Language , 18 2nd Subtitle Language , 18 4:3 , 21 4:3 Display F ormat , 21 802.11 B/G Protection, 66 A/V Output Setting, 19 Access Control, 25 Activate, 67 Ad-Hoc Mode Rate, 66 Add to F av, 32 Advance Configuration, 66 After next prog ra[...]

81 Every Weekda y , 47 Every Week end, 47 F actor y Setting, 29 File List, 46 , 51 , 53 , 56 File Management, 70 File Name, 48 Find, 78 , 79 Format Hard Disk, 60 F requency, 28 Full, 21 Gatewa y, 65 , 76 GCC , 73 Hard of hearing, 18 HDMI, 11 HDMI, 13 HDMI Output, 22 HEXA, 68 high definition, 22 Info Bo x Display Time, 26 Info Bo x P osition, 26 in[...]

82 INDEX S/PDIF, 15 SCART Output, 20 Search Mode, 27 , 28 Service, 47 Service Search, 27 services list, 30 Shared, 68 Shor t Slot Time, 66 Show Provider, 31 Size, 51 Sor ting, 51 Sound Mode, 22 Space, 41 specifications, 9 , 11 Star t F requency, 27 , 28 Star t Search, 28 Star t Time, 48 stereo , 22 Subnet Mask, 65 , 76 subtitle, 34 Symbol Rate, 28[...]

[...]

Correct disposal of this product This marking shown on the product or its literatur e indicates that it should not be disposed with other household wastes at the end of its working life. T o prevent possible harm to the envir onment or human health from uncontrolled waste disposal, please separate this from other types of wastes and r ecycle it res[...]