Toshiba NB305N440BL manual

T OSHIBA NB300 series User's Manual NB300 series User's Manual[...]

User ’s Manual ii Copyright © 2009 by TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No p at ent liabili ty is assumed, with respect to the use of the information contained herein. TOSHIBA NB300 series User ’s Manual First edition[...]

User ’s Manual iii MultiMediaCard and MMC are trademarks of the MultiMediaCard Association. Other trademarks and registered trad emarks not listed above may be used in this manual. FCC information FCC notice "Declaration of Conform ity Information" This equipment has been tested and fo und to comply with th e limits for a Class B digita[...]

User ’s Manual iv Cont act Address: TOSHIBA America Information Systems, Inc. 9740 Irvine Bouleva rd Irvine, California 9261 8-1697 T elephone: (949) 583-3000 EU Conformity S t atement This product and - if applicable - t he supplied accessories too are marke d with "CE" and comply therefore wit h th e applicable harmonized Europe an st[...]

User ’s Manual v Canadian regulatory in formatio n (Canada only) This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulation of the Canadian Department of Communications. Note that Canadian De partment of Communications (DOC) regulations provide, that c[...]

User ’s Manual vi Disposal of batteries and/or accumulators ENERGY ST AR ® Program The crossed out wheeled dust bin symbol in dicates that batteries and/or accumulators must be colle cted and dispose d of separately from household waste. If the battery or accumulato r contains more than the spe cified values of le ad (Pb), mercury (Hg), and/or c[...]

User ’s Manual vii Disposing of the com puter and the computer’s batte r ies ■ Discard this compu ter in acco rdance with appli cable laws and regulations. For further information, cont act y our local government. ■ This computer contains rechargeable batteries. After repeated use, the batteries will finally lose th eir ability to hold a ch[...]

User ’s Manual viii T able of Content s Copyright. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii T rademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

User ’s Manual ix Right side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5 Back side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6 Underside . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6 Fro[...]

User ’s Manual x Chapter 7 HW Setup and Passwords HW Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1 Accessing HW Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1 HW Setup Win dow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

User ’s Manual xi Appendix E T OSHIBA PC Health Monitor St arting the T OSHIBA PC Health Monitor. . . . . . . . . . . . . . . . . . . . . . E- 2 If a TO SHIBA PC Health Monitor message is displayed . . . . . . . . . . E-2 Glossary Index[...]

User ’s Manual xii Preface Congratulations on your purchase of the TOSHIBA NB300 computer . This powerful notebook computer provides excellent expansion capability , includes multimedia functionality , and is designed to provide years of reliable, high-performan ce computing. This manual tel ls how to set up and begin using your TOSHIBA NB300 com[...]

User ’s Manual xiii Preface Chapter 5, The Keyboard , describes special keyboard functions including the keypad ov erlay and hot keys. Chapter 6, Power and Power-up Modes , gives det ails on the computer’s power resources and battery save modes. Chapter 7, HW Setup and Passwords , explains how to configure the computer using the HW Setup progra[...]

User ’s Manual xiv Preface Display Messages Messages are used in this manual to bring important information to your attention. Each type of message is identified a s shown below . T erminology This term is defined in this document as follows: ABC When procedures require an action such as clicking an icon or entering text, th e icon's name or[...]

User ’s Manual xv General Precautions TOSHIBA computers are designed to optimize safety , minimize strain and withstand the rigors of portability . Ho wever, cert ain precautions should be observed to further reduce the risk of personal injury or damag e to the computer . Be certain to read the general precau tions below and to note the cautions [...]

User ’s Manual xvi General Precautions Creating a computer-friendly environm ent Place the computer on a flat surface that is large enough for the computer and any ot her items you are using, such as a printer . Leave enough space around the comput er and o ther equipment to provide adequate venti lation. Other wise, they may overheat. T o keep y[...]

User ’s Manual xvii General Precautions Pressure or imp act damage Do not apply heavy pressure to the com puter or subject it to any form of strong impact as this can damage the computer's compone nts or otherwise cause it to malfuncti on. Mobile phones Please be aware that the use of mob ile phones can inte rfere with the aud io system. The[...]

User ’s Manual 1-1 Chapter 1 Introduction This chapter provides an equipment checkli st, and it identifies the computer ’s features, options and accessories. Equipment checklist Carefully unpack your comp uter , taking care to save the b ox and packaging materials for future use. Hardware Check to make sure you have al l the following items: ?[...]

User ’s Manual 1-2 Introduction Sof twar e The following Wi ndows ® operating system and ut ility sof tware are pre-installed. ■ Windows ® 7 ■ Bluetooth Driver ■ Display Drivers for Windows ■ TOSHIBA HWSetup ■ TOSHIBA Supervisor Password ■ LAN Driver ■ Pointing Device Driver ■ Sound Driver for Windows ■ Wireless LAN Driver (Ca[...]

User ’s Manual 1-3 Introduction Features This computer incorporates the following fea tures and benefits: Processor Chipset Memory Built-in Y our computer i s equipped with on e processor and processor type varies depending on model. T o check which type of processor is included in your model, open the TOSHIBA PC Diagnostic T ool Utility by click[...]

User ’s Manual 1-4 Introduction Disks Keyboard Pointing Device Power Hard disk dr ive This computer supports SA T A 3.0Gbps and is equipped with one of the following hard disk drive (HDD) types. The capacity of each hard disk drive model is different. ■ HDD ■ 160GB ■ 250GB Please note that part of the hard disk drives overall capacity is re[...]

User ’s Manual 1-5 Introduction Ports Slots Multimedia RTC battery The internal RTC battery backs up the Real T ime Clock (RTC) and calendar . AC adaptor The AC adaptor provides power to the system and recharges the batteries whe n they are low . It comes with a detachable power cord which will either have a 2-pin or 3-pin plug enclosure. As the [...]

User ’s Manual 1-6 Introduction Communications Headphone jack This jack lets you connect speakers or a ste reo headphone. When you connect an external speaker or headphones, the internal speaker is automati cally disabled. Microphone j ack A 3.5mm mini microphone jack enables connection of a three-conductor mini jack for stereo microphone input, [...]

User ’s Manual 1-7 Introduction Security Software The computer's internal disp lay panel supports high-resolution video graphics and can b e set to a wide range of viewing angl es for maximum comfort and readability . Security lock slot Allows the connection of a security lock to anchor the computer to a desk o r other large object. Operatin[...]

User ’s Manual 1-8 Introduction Sp ecial features The following features are eithe r un ique to TOSHIBA computers or are advanced features which ma ke the computer more con venient to use. Access each function using the following proce dures. *1 T o access the Power Options, click St a r t J Control P anel J System and Security J Power Options . [...]

User ’s Manual 1-9 Introduction Battery save mode *1 Th is feature lets you configure the computer in order to save battery power . This can be specified in the Power Opti ons. Low battery automatic Hibernation Mod e *1 When battery power is exhausted to the point th at computer operation cannot be continued, the system automatically ent ers Hibe[...]

User ’s Manual 1-10 Introduction Hibernatio n Mode This feature lets you turn off the power to the computer without exiting from your software. The contents of main memory are automatically saved to the hard disk drive so that when you next turn the power on again, you can continue working right where you le ft off. Refer to the T urning off the [...]

User ’s Manual 1-1 1 Introduction T OSHIBA V alue Added Package TOSHIBA Flash Cards The TOSHIBA Flash Cards provide a quick way to modify selected system functions and to launch applications. ■ Hot key function ■ TOSHIBA utility launcher function TOSHIBA Power Saver TOSHIBA Power Saver provides you with the features of more various powe r sup[...]

User ’s Manual 1-12 Introduction Utilities and Applications This section describes the pre-installed uti lities that come with the computer and details how to start them. For further information on th eir operation, please refer to each utility's online manu al, help files or README.TXT file. TOSHIBA ConfigFree TOSHIBA ConfigFree is a suite [...]

User ’s Manual 1-13 Introduction Options Y ou can add a number of options to make your computer even more powerful and con venient to use. The foll owing options are available: Memory kit PC2-5300 (DDR2-667) or compatible 1GB or 2GB memory module can easi ly be installed in the computer . Battery Pack An additional battery pack can be purchased f[...]

User ’s Manual 2-1 Chapter 2 The Grand T our This chapter identifies the vari ous components of your computer . Become familiar with each component before yo u operate the computer . Front with the display closed The following figure shows the computer ’s front with it s display panel in the closed position. 1. System indicators Figure 2-1 Fron[...]

User ’s Manual 2-2 The Grand T our DC IN The DC IN indicator norma lly glows green when power is being correctly supplied from the AC power adaptor . However , If the output voltage from the adaptor is abnorma l, or if the computer's power supply malfunctions, this indicator will go out. Power The Power indicator no rmally glows green when t[...]

User ’s Manual 2-3 The Grand T our Lef t side The following figure shows the comp uter's left side. 1. External monitor port 2. LAN jack 3. Thermal vent holes 4. Universal Serial Bus(USB2.0) port 5. Bridge media slot Figure 2-3 The left side of the computer Arrow Lock When the Arrow indicator lights green, you can use the dark gray la beled [...]

User ’s Manual 2-4 The Grand T our Do not block the thermal vent holes. Keep foreign metal objects, such as screws, staples and paper clips, out of the cooling vent s. Foreign metal objects can create a short circuit, which can cause damage and fire, possibly resulting in serious inju ry . Universal Serial Bus (USB 2.0) por t The Universal Serial[...]

User ’s Manual 2-5 The Grand T our Right side The following figure shows the comp uter ’s right side. 1. Headphone jack 2. Microphone jack 3. Universal Serial Bus (2.0) port 4. DC IN 19V jack 5. Security lock s lot Figure 2-4 The right side of the computer 3 4 2 1 5 Headphone jack A standard 3.5 mm mini headphone jack enables connection of ster[...]

User ’s Manual 2-6 The Grand T our Back side Figure 2-5 show s the computer ’s back side . Figure 2-5 The computer ’s back side. Underside The following figure shows the undersi de of the computer . Y ou should ensure that the disp lay is closed befo re the computer is turned over to avoid causing any damage. 1. Battery safety lock 2. S peake[...]

User ’s Manual 2-7 The Grand T our Memory module slot The memory module slot is located here. The memory module slot allows for the replacement with an addi tional memory module. Ple ase refer to the Additional memory module section in Chapter 8, Optional Devices for more information. Battery release latch Slide and hold this latch into its &apos[...]

User ’s Manual 2-8 The Grand T our Front with the display op en This section shows the computer with the display panel open. In order to open the display , lift the display panel up and position it at a comfortable viewing angle for you. 1. Microphone 2. Web Camera LED 3. Web Camera 4. Display Screen 5. Power Button *6. Keyboard 7. T ouch Pad 8. [...]

User ’s Manual 2-9 The Grand T our Microphone A built-in microphone allows you to import and record sounds for your application - please refe r to the Sound system section in Chapte r 4, Operating Basics for more information. Web Ca me r a L ED The Web Camera LED glows blue when the Web Camera is working. Web Ca me r a We b C am er a is a device [...]

User ’s Manual 2-10 The Grand T our Keyboard indicators When the CAPS LOCK indicator glows, the keyboard will prod uce capitals when any letter is typed. 1. CAPS LOCK indicator Figure 2-8 Keypad indicators 1 CAPS LOCK This ind icator glows green when letter keys are locked into their uppercase format.[...]

User ’s Manual 2-1 1 The Grand T our AC adaptor The AC adaptor can automa tically adjust to any voltage ranging from 100 to 240 volts volts and to a frequency of ei ther 50 or 60 he rtz, enabling you to use this computer in almost any coun try/region. The adaptor converts AC power to DC power and reduces the voltage supplied to this computer . T [...]

User ’s Manual 3-1 Chapter 3 Getting S t arted This chapter provides basic information to start using your computer . It covers the following topics: ■ Connecting the AC adaptor ■ Opening the display ■ T urning on the power ■ S tarting up for the first time ■ T urning off the power ■ Resta rting the computer ■ System Recovery Option[...]

User ’s Manual 3-2 Getting S tarted ■ Use a anti-virus software and make sure it is updated regularly . ■ Never format storage media without checking its content - formatting destroys all stored data. ■ It is a good idea to periodically back up the internal hard disk drive or other main storage device to external media. General storage medi[...]

User ’s Manual 3-3 Getting S tarted Connecting the AC adaptor Attach the AC adaptor when you need to cha rge the battery or you want to operate from AC power . It is also th e fastest way to get started, because the battery pack will need to be charged before you can operate from battery power . The AC adaptor can be connected to any po wer sourc[...]

User ’s Manual 3-4 Getting S tarted 1. Connect the power cord to the AC adaptor . Figure 3-1 Connecting the power cord to the AC adap tor (2-pin plug) Figure 3-2 Connecting the power cord to the AC adap tor (3-pin plug) 2. Connect the AC adaptor' s DC output plug to the DC IN 19V jack on the right side of the computer . Figure 3-3 Connecting[...]

User ’s Manual 3-5 Getting S tarted Opening the display The display panel can be opened to a wide range of angles for optimal viewing. While holding down th e palm rest with one hand so that the main body of the computer is not raised, slowly lift the display panel - this will allow the angle of the display panel to be ad justed to provide optimu[...]

User ’s Manual 3-6 Getting S tarted ■ When opening the panel, please be careful not to fo rce it beyond the point where it moves easily . ■ Be careful not to open the display panel too far as this could put stress on the display panel’s hinges and cause damage. ■ Do not press or push on the display panel. ■ Do not lift the computer by t[...]

User ’s Manual 3-7 Getting S tarted T urning on the power This section describes how to turn on the power - the Power indicator will then indicate the status. Please refer to the Monitoring of power condition section in Chapter 6, Power and Power-up Modes for more information. 1. Open the computer's display panel. 2. Press the computer'[...]

User ’s Manual 3-8 Getting S tarted T urning off the power The power can be turned off in one of three modes, either Shut Down Mode, Hibernation Mode or Sleep Mode. Shut Down Mode When you turn off the power in Shut Do wn Mode no data will be saved and the computer will boot to the opera ting system's main screen the next time it is turned o[...]

User ’s Manual 3-9 Getting S tarted ■ Y ou can return to your previo us working environment immediately when you turn on the computer . ■ Saves power by shutting down the system when the computer receives no input or hardware access for the time period set by the System Hibernate feature. ■ Allows the use of the panel power off feature. S t[...]

User ’s Manual 3-10 Getting S tarted Benefits of Sleep Mode The Sleep Mode feature provide s the following benefits: ■ Restores the previous workin g environment more ra pidly than does the Hibernation Mode feature. ■ Saves power by shutting down the system when the computer receives no input or hardware access for the time period set by the [...]

User ’s Manual 3-1 1 Getting S tarted 3. Press the power button. This feature must be enabled. Refer to the Power Options in the Contro l Panel. When you turn the power back on, you can continue where you left when you shut down the computer . Sleep Mode limitations Sleep Mode will not function under the following conditions: ■ Power is turned [...]

User ’s Manual 3-12 Getting S tarted System Recovery O ptions The System Recovery Options feature is installed on the hard di sk when shipped from the factory . The System Recovery Options menu includes tools to repair st a rtup problems, run diagnostics or restore the system. See the Windows Help and Sup port content for more information about S[...]

User ’s Manual 3-13 Getting S tarted A recovery image of the software on your computer i s stored on the hard disk drive, and can be copied to eit her DVD or USB Flash Memory by using the following steps: 1. Select either blank DVD or USB Flash Memory . 2. The application will allow you to choos e from a variety of different media onto which the [...]

User ’s Manual 3-14 Getting S tarted 1. T urn off your computer . 2. While holding down 0 (zero) key on the keyb oard, turn on your computer . 3. A menu will be displayed from which you should follow the on-screen instructions. Restoring the pre-inst alled softw are from your created Recovery Media If the pre-installed files are damaged , you are[...]

User ’s Manual 4-1 Chapter 4 Operating Basics This chapter describes the basic operations of your computer an d highlights the precautions that should be taken when using it. Using the T ouch Pad T o use the T ouch Pad, simply touch and move your fingertip across it in the direction you want the on-screen pointer to go. 1. T ouch Pad 2. T ouch Pa[...]

User ’s Manual 4-2 Operating Basics The two butt ons below the T ouch Pad are used like the but tons on a standard mouse - press the left butt on to select a menu item or to manipulate text or graphics designated by the po inter , and press the rig ht button to display a menu or other function depending on the software you are using. USB Sleep an[...]

User ’s Manual 4-3 Operating Basics St arting the USB Sleep an d Charge Utility T o start the utility , click Sta rt J All Programs J TOS HI BA J Utilities J USB Sleep and Charge . Y ou can set T ypi cal Mode/Alternate Mode/D isable USB sleep and charge function also in BIOS Se tup menu. Please refer to Accessing HW Setup in Chapter 7 for how to [...]

User ’s Manual 4-4 Operating Basics Power supply mod e settings Y our PC has multiple charging modes so th at many different USB devices can be supported for USB Sleep and Charge function . T ypi cal Mode (Default) is suitable for a wide range of digital audio players. However , determining which mode is suitable for your USB device is unknown wi[...]

User ’s Manual 4-5 Operating Basics ■ TOSHIBA Disc Creator cannot record in packet format. ■ Y ou might not be able to use the 'Disc Backup' function of TOSHIBA Disc Creator to back up a DVD-R, DVD-R (Dual Layer), DVD-RW , DVD+R, DVD+R (Double Layer) or DVD+RW disc that was made with other software on a different optical media recor[...]

User ’s Manual 4-6 Operating Basics Using the web camera Built-in web camera is provided with some models. This section describe s the bundled webcam utility , which c an capture still and video images. The web camera will auto-run when Windo ws starts. 1. Microphone 2. Web Camera LED 3. Web Camera Figure 4-2 Web Camera Ensure that you rem ove th[...]

User ’s Manual 4-7 Operating Basics Using TOSHIBA W eb Camera Appli cation TOSHIBA W eb Camera App lication is pre-configured to start when yo u turn on Windows ® 7; if you need to restart it go to Start → All Programs → TOS HI BA → Utilities → W eb Camera Applic ation . Figure 4-3 Using the Software Capture S till Image Click to ca ptur[...]

User ’s Manual 4-8 Operating Basics Using the microphone Y ou can u se the built-in or an external micro phone that connects to the microphone jack to record sounds into your application s. It can also be used to issue voice commands to applic ations that support such functions. Since your computer ha s a microphone and speaker , “feedback” m[...]

User ’s Manual 4-9 Operating Basics Security ■ TOSHIBA strongly recommend that y ou enable encryption functionality , otherwise your computer will be open to illegal access by an outsider using a wireless connection. If this occurs, the outsider may illegally access your system, eavesdrop, or cause the loss or destruction of stored data. ■ TO[...]

User ’s Manual 4-10 Operating Basics Enable/Disa ble Wireless communication w ith hot key Y ou can enable or disa ble Wireless communicati on (Wireless LAN, Bluetooth) functions, with hot keys ( FN + F8 ). No transmissions are sent or received when wireless communication is turned off. Wireless communication indicator The wireless communication i[...]

User ’s Manual 4-1 1 Operating Basics LAN The computer has built-in suppo rt for Ethernet LAN (10 megabits per second, 10BASE-T) and Fast Ethernet LAN (100 megabits per second, 100BASE-TX). This section describes how to connect/disconnect to a LAN. LAN cable types If you are using Fast Ethernet LAN (100 megabits per second, 100BASE- TX), be sure [...]

User ’s Manual 4-12 Operating Basics 1. LAN jack 2. LAN cable Figure 4-4 Connecting the LAN cable 3. Plug the other end of the cable into a LAN hu b connector or router . Check with your LAN administrator and hardware or software vendor before using or configuring a netw ork connection. Disconnecting the LAN cab le T o disconnect the LAN cable, f[...]

User ’s Manual 4-13 Operating Basics Using the cleaning cloth The cleaning cloth can be used to wipe away dust and finge rprints from the keyboard and palm rest area of your computer . Moving the computer While the computer i s designed for ru gged d urability you should exercise a few simple precautions when moving it in order to help ensure tro[...]

User ’s Manual 4-14 Operating Basics Heat dispersal T o protect from overheating, the pr ocessor has an internal temperature sensor . If the computer ’s inte rnal temperature rises to a certain level, the cooling fan is turned on or the pro ce ssing speed is lowered. Y ou can select whether to control the processor temperature by turning on the[...]

User ’s Manual 4-15 Operating Basics T askbar icon TOSHIBA HDD Protection Properties Y ou can change the TOSHIBA HDD Protection settings by using the TOSHIBA HDD Protection window . T o open the window , click Star t J All Programs J TOS HI BA J Utilities J HDD Protection Settings . The window can also be started from the icon on the T askbar or [...]

User ’s Manual 4-16 Operating Basics 3D V iewer This feature displays a 3D object on the scre en which moves in according to tilting or vibration of the computer . When the TOSHIBA HDD Protection dete cts computer vibration the Hard Disk Drive head is parked and the 3D object disk rotation will stop. When the head is un-parked the disk wi ll begi[...]

User ’s Manual 5-1 Chapter 5 The Keyboard The computer's keyboard layouts are compatible with a 104/105-key enhanced keyboard - by pressing some keys in combination, all of the 104/105-key enhance d keyboard functions can be performed on the computer . The number of keys available on your keyboard will depend on which country/region your com[...]

User ’s Manual 5-2 The Keyboard Function keys: F1 … F12 The function keys (not to be confused with the special FN key) are the twelve keys at the top of your key board - these keys function differentl y from other keys. F1 through F12 are called functi on keys because they execute programmed functions when pressed and, when used in combination [...]

User ’s Manual 5-3 The Keyboard Press FN + F10 or FN + F1 1 to access the computer's inte grated keypad. When activated, the keys with grey ma rkings on their bottom e dge become either numeric keypad keys ( FN + F1 1 ) or cursor control keys ( FN + F10 ). Please refer to the Keypad overlay section in this chapter for more information on how[...]

User ’s Manual 5-4 The Keyboard Sleep : Pressing FN + F3 switches the system to Sleep mode. Hibernate : Pressing FN + F4 switches the system to Hibernation mode. Output : Pressing FN + F5 changes the active display devi ce. Brightness (Down) : Pressing FN + F6 decreases the comp uter's display panel brightness in individual steps. Brightness[...]

User ’s Manual 5-5 The Keyboard T ouch Pad: Pressing FN + F9 enables or disables the T ouch Pad function. Zoom: Pressing FN + Sp ace change s the display resolution. TOSHIBA Zooming Utility (reduce): Pressing FN + 1 reduces the icon size on the desktop or the font sizes wi thin one of the supported applica tion windows. TOSHIBA Zooming Utility (e[...]

User ’s Manual 5-6 The Keyboard Windows special keys The keyboard p rovides two keys tha t have special functio ns in Windows: Windows S tart Button activates the Start men u and the other , the application key , has the same fu nction as the secondary mouse button. This key activates the Window s Star t menu. This key has the same function as t [...]

User ’s Manual 5-7 The Keyboard Figure 5-2 The numeric keypad overlay T emporarily using normal keyboard (ove r lay on) While using the overlay , you can te mporarily access the normal keyboard functions without having to turn the overlay off: 1. Hold FN and press any other key - this ke y wil l operate as if the overla y were off. 2. T yp e uppe[...]

User ’s Manual 5-8 The Keyboard Generating ASCII charact ers Not all ASCII characters can be generated using norma l keyboard operation, but you are a ble to generate the se characters using their specific ASCII codes. With the overlay o n: 1. Hold down AL T . 2. Using the overlay keys, type the ASCII code of the character you require. 3. Release[...]

User ’s Manual 6-1 Chapter 6 Power and Power-up Modes The computer's power resources incl ude the AC adaptor and internal batteries. This chapter gives details on making the most effective use of these resources including charging and ch anging batteries, tips for saving battery power , and po wer-up modes. Pow er condition s The computer&ap[...]

User ’s Manual 6-2 Power and Power-up Modes T ab le 6-1 Power conditions continued Power indica tors As shown in the below table, the Battery , DC IN and Power indicators on the system indicator alert you to the computer ’s operating capability and battery charge status. Battery indicator Check the Battery indicator to determine the status of t[...]

User ’s Manual 6-3 Power and Power-up Modes DC IN indicator Check the DC IN indicator to determine t he power status with the AC adaptor connected - the follow ing indi cator conditions shou ld be noted: Power i ndica tor Check the Power indicator to determine the pow er status of the computer - the following indicator conditions shou ld be noted[...]

User ’s Manual 6-4 Power and Power-up Modes Real T ime Clock battery The Real Time Clock (RTC) battery provides power fo r the internal real time clock and calendar function and also main tains the system configuration while the computer is turned off. If the R TC battery becomes completely discharged, th e system will lose this in formation and [...]

User ’s Manual 6-5 Power and Power-up Modes Care and use of the battery p ack The battery pack is a vita l compon ent of portable computing and, as such, taking proper care of it will help ensure a longer operating time on battery power as well as deli ver a longer life for you r battery pack. The instructions detailed in this section will help t[...]

User ’s Manual 6-6 Power and Power-up Modes Tim e The following table shows the approximate time required to fully charge a discharged battery . Battery charging notice The battery may not begin charging immedia tely under the following conditions: ■ The battery is extremely hot or cold (if the battery is extremely hot, it might not charge at a[...]

User ’s Manual 6-7 Power and Power-up Modes In such cases you should follow the steps as det ailed below: 1. Fully discharge the battery by leavin g it in the computer with the power on until the system automat ically turns itself off. 2. Connect the AC adaptor to the DC IN 19V jack of the computer , and to a wall outlet that is supplying power .[...]

User ’s Manual 6-8 Power and Power-up Modes ■ The environmental temperature - operating time decreases at low temperatur es. ■ The condition of the battery terminals - you should always ensure the terminals stay clean by wiping them with a clean dry cloth before installing the battery p ack. Ret aining data with power off When you turn off yo[...]

User ’s Manual 6-9 Power and Power-up Modes ■ Disconnect the AC adaptor when the battery is fully charged - overcharging will make the battery h ot and can shorten its operating life. ■ If you are not going to use the co mputer for more than eight hours, disconnect the AC adap tor . ■ S tore spare battery packs in a cool dry place out of di[...]

User ’s Manual 6-10 Power and Power-up Modes 5. Slide the batte ry safety lock towards the release ( ) position to make the battery release latch movable. 1. Battery safety lock 2. Battery release latch 3. Battery pack Figure 6-1 Releasing the battery pack (1) 6. Slide and hold the battery release latch (1 ) to disengage the battery pack and then[...]

User ’s Manual 6-1 1 Power and Power-up Modes T o install a battery , follow the steps as detailed below: 1. Insert the battery pack as far as it will go into the computer (1). 2. Ensure that the battery pack is securely in place and the battery safety lock (2) is in its position. 1. Battery Pack 2. Battery safety lock Figure 6-3 Securing the bat[...]

User ’s Manual 6-12 Power and Power-up Modes T OSHIBA Password Utility The TOSHIBA Supervisor Password Utility allows you to maintain an additional level of security and provides two level s of password security: User and Supervisor . User Password T o start the utility , po int to or click the following items: Launch TOSHIBA Assist J SECURE J Us[...]

User ’s Manual 6-13 Power and Power-up Modes Power-up modes The computer has three power-up modes: ■ Boot: Computer shuts down without saving data. Always save your work before you turn the computer off in boot mode. ■ Hibernation: Data in memory is saved to the hard disk. ■ Sleep: Data is maintained in the computer ’s main me mory . Wind[...]

User ’s Manual 7-1 Chapter 7 HW Setup and Passwords This chapter explains how to us e TOSHIBA HW Setup program to configure your computer and how to set passwords. HW Setup TOSHIBA HW Setup allows y ou to configure setti ngs for General, Password, Display , Boot Prio rity , Keyboard, USB, LAN. Accessing HW Set up Click on Start → All Programs ?[...]

User ’s Manual 7-2 HW Setup and Passwords This window displays the BIOS version and contains two buttons: Setup This field displays BIOS V ersion and date. Password User Password This option allows you to set or reset the user password for power on. T o enter a user password: 1. Select Registered to display the following prompt: Enter Password: E[...]

User ’s Manual 7-3 HW Setup and Passwords If they do not match, the follow ing message appe ars. Y ou mus t repeat step 1. Incorrect Password!!! 4. Follow th e same procedures describ ed in the earlier section to set a new user password. Display This tab allows you to customize your comp uter ’s display settings for either the internal LCD scre[...]

User ’s Manual 7-4 HW Setup and Passwords LAN Wake-up o n LAN This featu re lets the comput er ’s power be tu rned on from shutdo wn when it receives awake-up packet ( Magic packet ) from the LAN. Regarding Wake-up on LAN from sleep or hibernation, you must check the "Allow the device to wake the computer" check box within the LAN Dev[...]

User ’s Manual 8-1 Chapter 8 Optional Devices Optional devices can expand the computer's capabilities and its versatility . This chapter describes the connection or installation of the following devices: Cards/memory ■ Bridge medi a slot ■ Secure Digital TM (SD) Card (SD memory card, SDHC memory card, miniSD Card, microSD Card) ■ Multi[...]

User ’s Manual 8-2 Optional Devices Bridge med i a slot The computer is equipped with a Bri dge media sl ot that can accommodate some kinds of memory media with vari ous memory cap acities so that you can easily transfer data from devices, such as digital cameras and Personal Digital Assistants. Figure 8-1 Examples of memory media Memory media Th[...]

User ’s Manual 8-3 Optional Devices ■ The maximum capacity of SD memo ry cards is 2GB. The maximum capacity of SDHC memory cards is 32GB. Memory media format New medi a cards are format ted according to specific standards. If you wish to reformat a media card, be sure to do so with a device that uses media cards. Formatting an SD/SDHC memory ca[...]

User ’s Manual 8-4 Optional Devices Additional memory module Y ou can replace with an additional memo ry in order to increase the amount of system memory t hat is available. This section describe s how to i nstall and remove optional me mory modules. Inst alling a memory m odule T o install a memory module: 1. Shut down the computer - make sure t[...]

User ’s Manual 8-5 Optional Devices 3. T urn the computer upside down and remove the battery pack - refer to Replacing the battery pack section in Chapter 6, Power and Power-up Modes , if required. 4. Loosen the screw securing the memory module cover . 1. memory module cover Figure 8-2 Removing the memory module cover 5. Align the notch of the me[...]

User ’s Manual 8-6 Optional Devices 6. Seat the memory module cover in place and secure it with one scre w . 1. memory module cover 2. screw Figure 8-3 Seating the memory module cover 7. Install the battery pa ck - refer to Replacing th e battery pack section in Chapter 6, Power and Power-up Modes , if required. 8. T urn your computer ov er . 9. [...]

User ’s Manual 8-7 Optional Devices 2. T urn the computer upside down and remove the battery pack (refer to Chapter 6, Power and Power-up Modes .) 3. Remove one screw securing the memory module cover . 4. Lift off the memory mo dule cover . 5. Push the latches outward and the memory modul e will pop up. 6. Grasp the memory module by th e sides an[...]

User ’s Manual 8-8 Optional Devices External monitor An external analog monitor can be connected to the computer 's external monitor port. In order to connect a monitor , follow the steps as detailed below: 1. Connect the monitor cable to the external monitor port . 1. External Monitor port 2. Monitor cable Figure 8-4 Connecting the monitor [...]

User ’s Manual 8-9 Optional Devices Connecting the secu rity lock In order to connect a security cable to the computer , follow the steps as detailed below: 1. T urn the computer so its right hand side faces you. 2. Align the security cable with the 'lock hole' and secure it in place. 1. Security lock s lot 2. Security lock Figure 8-5 S[...]

User ’s Manual 9-1 Chapter 9 T roubleshooting TOSHIBA designed the computer for dur ability . However , should problems occur , following th e procedures in thi s chapter can help to determine the cause. All readers should become familiar with this chapter . Knowing what mi ght go wrong can help prevent problems from occurring. Prob lem solving p[...]

User ’s Manual 9-2 T roubleshooting Preliminary c hecklist Consider the simplest solution first. The items in this checklist are easy to fix and yet can cause what appears to be a serious problem. ■ Make sure you turn on all peripheral devices before you turn on the computer . This includes your printer and any other externa l device you are us[...]

User ’s Manual 9-3 T roubleshooting Hardware and system checklist This section discusses problems ca used by your computer's hardware or attached peripherals. Basic problems may oc cur in the following areas: System start- up When the computer does not start pr operly , check the following items: ■ Self T est ■ Power Sources ■ Power-on[...]

User ’s Manual 9-4 T roubleshooting Depending on how the Boot Priority is set in the Hardware Setup, the computer tries to load first from drive A th en from drive C, or first from drive C then from drive A. If any of the following conditions are present, the self test failed: ■ The computer stops and does not proceed to display information or [...]

User ’s Manual 9-5 T roubleshooting Battery If you suspect a problem with the battery , check the DC IN and the battery indicator . For information on indicators and battery operation see Chapter 6, Power and Power-up Modes . Problem Procedure Battery doesn’t power the computer The battery may be discharged - connect the AC adaptor to recharge [...]

User ’s Manual 9-6 T roubleshooting Password Keyboard Keyboard problems can be caused by your setup configuration. For more information refer to Chapter 5, The Keyboard and Chapter 7, HW Setup and Passwords . LCD p anel Apparent LCD problems may be related to the computer ’ s setup. Refer to Chapter 7, HW Setup and Passwords , for more informat[...]

User ’s Manual 9-7 T roubleshooting Hard disk drive Pointing device If you are using a USB mouse, also refer to the USB section in this chapter and to your mouse documentation. T ouch Pad Problem Pro cedure Computer does not boot from hard disk drive Check if a diskette is in the diskette drive or a CD/DVD is in the optical disc drive. Remove any[...]

User ’s Manual 9-8 T roubleshooting USB mouse The mouse poi nter moves too fast or too slow T ry changi ng the speed setting in the mouse control utility . 1. Click Start J Control Panel J Hardware and Sound J Mouse to access the mouse control uti lity . 2. Click the Pointer Options tab. 3. Set the speed as instructed and click OK . Problem Proce[...]

User ’s Manual 9-9 T roubleshooting SD/MuliMedia Card Refer also to Chapter 8, Optional Devices . External Monitor Refer also to Chapter 8, Optional Devices , and to your monitor ’s documentation. Problem Pro cedure Memory card error occurs Reseat the memory card to make sure it is firmly connected. Check the card’s documentation. Y ou cannot[...]

User ’s Manual 9-10 T roubleshooting Sound system USB Refer also to your USB device’ s documentation. Problem Pro cedure No sound is heard Check the software volume setting s. Make sure the headphone connection is secure. Check Sound Preferences. Make sure the sound function is enabled and that settings for I/O address, Interrupt level and DMA [...]

User ’s Manual 9-1 1 T roubleshooting USB Sleep and Charge functi on Problem Pro cedure I cannot use the "USB Sleep and Charge function". The setting of " USB Sleep and Charge function" may be disabled. Check the "USB Sleep and Charge" check box to enable this function i n the TOSHIBA USB Sleep and Charge Utility . W[...]

User ’s Manual 9-12 T roubleshooting Sleep/Hibernation External d evices connected to the compatible ports do not work. Some external devices may not work when connected to a compatible port when the "USB Sleep and Charge function" is enabled in the TOSHIBA USB Sleep and Charge Util ity . Reconnect the exte rnal device after turning ON [...]

User ’s Manual 9-13 T roubleshooting LAN Wireless LAN If the following procedures do not re store LAN access, consult your LAN administrator . For more information on wireless communication, refer to Chapter 4, Operating Basics . Bluetooth For more informa tion on wireless co mm unication, refer to Chapter 4, Operating Basics . Problem Pro cedure[...]

User ’s Manual 9-14 T roubleshooting T OSHIBA support If you require any additional help using your compu ter or if you are having problems operating the computer, you may need to cont act TOSHIBA for additional techni cal assistance. Before you call Some problems you experience may be related to software or the operating system so it is import a[...]

User ’s Manual 9-15 T roubleshooting Where t o writ e If you are still unable to solve the prob lem and suspect that it is hardware related, write to TOSHIBA at the nearest location listed on the below . Outside of Europe Europe Australia TOSHIBA Australia Pty . Ltd. I nformation Systems Division Building C, 12-24 T alavera Rd, North Ryde, 21 13,[...]

User ’s Manual 10-1 Chapter 10 Legal Footnotes This chapter slates the Legal Foo t note(s) information app licable to TOSHIBA com puters. CPU *1 Central Processing Unit ("CPU") Performance Legal Footnote. CPU performance in your co mputer pr oduct may vary from specifi cations under the following conditi ons: ■ use of certain external[...]

User ’s Manual 10-2 Legal Footnotes Under some conditions, your computer product may automatically shut- down. This is a normal protective feat ure designed to reduce the risk of lost data or damage to the product when used outside recommended conditions. T o avoid risk of lost data, always make back-up copies of data by periodically storing it o[...]

User ’s Manual 10-3 Legal Footnotes LCD Over a period of time, and depending on the usage of the computer , the brightness of the LCD scree n will de teriorate. This is an intrinsic characteristic of LCD technology . Graphics Proces sor Unit (G PU) Graphics processor unit (GPU) p erformance may vary depending on product model, design configuratio[...]

User ’s Manual Appendixes-1 Appendixes T able of Content s Appendix A S pecifications................... ...................... ....................... ................ A-1 Appendix B Display Controller ...... ....................... ...................... ...................... B-1 Appendix C Wireless LAN .............. .........................[...]

User ’s Manual A-1 Appendix A S pecifications This appendix summarizes the computer ’s technical specifications. Physical Dimensions Size Environme nt al require ment s With 3 cell Battery 266(w) x 192.3(d) X 24.2(front) x 30.8(rear) millimeters (not including part s tha t extend beyond the main body) With 6 cell Battery 266(w) x 192.3(d) X 24.[...]

User ’s Manual A-2 Power Requirement s AC adaptor 100-240 volts AC 50 or 60 hertz (cycles per second) Computer 19V DC[...]

User ’s Manual B-1 Appendix B Display Controller Display controller The display controller inte rprets software commands into hardware com- mands that turn particular pixels on or off. A high-resolution e xternal moni tor connected to the computer can d isplay up to 1400 horizontal and 1050 vertical pixels at up to 16M colors. The display control[...]

User ’s Manual C-1 Appendix C Wireless LAN This appendix is intended to hel p you get your Wireless LAN network up and running, with a mi nimum of parameters. Card S pecifications Radio Characteristics Radio characteristics of Wireless LAN cards may vary according to: ■ Country/region where the product was purcha sed ■ T yp e of product Wirel[...]

User ’s Manual C-2 The range of the wireless signal is re lated to the transmit rate of the wire- less communication. Commu nications at lower tran smit range may travel larger distances. ■ The range of your w ireless devices can be affected when the antennas are placed near metal surfaces and solid h igh-density materials. ■ Range is also im[...]

User ’s Manual C-3 T able Wireless IEEE 802.1 1 Channels Sets (Revision b,g and n) When installing Wireless LAN card s, the channel configuration is managed as follows: ■ For wireless clients that operate in a Wireless LAN infrastructure, the Wireless LAN card will automatically start operation at the channel identified by the Wireless LAN Ac c[...]

User ’s Manual D-1 Appendix D AC Power Cord and Connectors The AC input plug of power cord must be compatible with various interna- tional AC power outle ts. Power cords need to meet the l ocal standards and the specifications listed as below: Length: Minimum 1.7 meters Wire size: Mi nimum 0.75 mm 2 Current rating: Minimum 2.5 amperes V oltage ra[...]

User ’s Manual D-2 Certification agencies In Europe, two condu ctors power cord s must be VDE type, H05VVH2-F or H03VVH2-F; while three co ndu ctorsbe VDE type, H05VV-F . For the United S tates and Canada, two pin plug configuration must be 2-15P (250V) or 1-15P (125V); while three pin be 6-15P (250V) or 5-15P (125V) as designated in the U.S. Nat[...]

User ’s Manual D-3 USA Australia Europe United Kingdom Canada China UL approved BS approved AS approved Approved by th e appropriate agency CSA approved CCC approved[...]

User ’s Manual E-1 Appendix E T OSHIBA PC Health Monitor The TOSHIBA PC Health Monitor soft ware program monitors computer system functions such as power cons umption, the cooling system and HDD Drop sensor . It alerts users of s pecific system condit ions via pop-up messages. It also tracks the usage of the computer and related devices, logging [...]

User ’s Manual E-2 ■ Once enabled, you may disable the TOSHIBA PC Health Monitor at any time by uninstallin g the sof tware via Uninstall a program in the Control Panel . Doing so will automatically d elete all collected information from the HDD. ■ The TOSHIBA PC Health Monitor software does not extend or modify T oshiba's obligations un[...]

User ’s Manual Glossa ry-1 Glossary The terms in this glossary cover topi cs related to this manual. Alternate naming is included for reference. Abbreviations AACS: advanced access content system AC: Alternating current ACPI: Advanced Configuration and Power Interface ASCII: American S tandard Code for Information Interchange BIOS: basic input/o [...]

User ’s Manual Glossa ry-2 Glossary IDE: integrated drive el ectronics IEEE: Institute of Electrical and Electronics Engineers I/O: input/output IrDA: Infrared Data Association IRQ: interrupt request KB: kilobyte LAN: local area network LCD: liquid crystal display LED: light emitting diode MB: megabyte MMC: multi media card OCR: optical character[...]

User ’s Manual Glossa ry-3 Glossary analog signal: A signal whose characteristics such as amplitude and frequency vary in proportion to (are an analog of) the value to be transmitted. V oice commu nicat ions are analog signals. application: A group of programs that to get her are used for a specific task such as accounting, financial planni ng, s[...]

User ’s Manual Glossa ry-4 Glossary byte: The repr esentation of a single char acter . A sequence of eight bits treated as a single unit; also the smallest addressa ble unit within the system. C cache memor y: A section of very fast memory in which frequently used information is duplicated for quick access. Accessing data from cache is faster tha[...]

User ’s Manual Glossa ry-5 Glossary components: Element s or parts (of a syst em) which make up the whole (system). Composite V ideo (YUV): A standard video signal use d to transmit images, e.g. from a VCR to a TV . computer program : A set of instructions writte n for a compu ter that enable it to achi eve a desired resu lt. computer system: A c[...]

User ’s Manual Glossa ry-6 Glossary Digital Audio: An audio compression standard that enables high-qual ity transmission and real-time playback of sound files. disk drive: The device that randomly accesses information on a disk and copies it to the comput er’s memory . It also writes data from memory to the disk. T o accomplish these ta sks, th[...]

User ’s Manual Glossa ry-7 Glossary E echo: T o send back a reflection of the transmitted data to the sending device. Y ou can display th e information on the screen, or output it to the printer , or both. When a computer receives back data it transmitted to a CRT (or other peri pheral device) an d then transmits the data to printer , the printer[...]

User ’s Manual Glossa ry-8 Glossary G gigabyte (GB): A unit of data storage equal to 1024 megabytes. See also megabyte. graphics: Drawings, pictures, or other images, such as cha rts or graphs, to present information. H hard disk: A storage device composed of a rigid platter or platters that can be magnetically coded with data. Hard disks hold mu[...]

User ’s Manual Glossa ry-9 Glossary I/O: Input/output. Refers to acceptance and transfer of data to and from a computer . I/O devices: Equipme nt used to communicate with the computer and transfer data to and from it. IrDA 1.1: An industry standard that enables cableless infrared serial data transfer at speeds of up to 4 Mbps. K K: T aken from th[...]

User ’s Manual Glossary-10 Glossary memory: T ypically re fers to the computer 's main memory , where programs are run and data is temporarily stored and processed. Memory can be volatile and hold data temporarily , such as RAM, or it can be n onvolatile and h old data permanently , such as ROM. A computer's main memory is RAM. See RAM,[...]

User ’s Manual Glossary-1 1 Glossary operating system: A group of programs that controls the basic operation of a computer . Operating system functions include in terpreting programs, creating data files, and controll ing the transmission and receipt (input/outpu t) of data to and from memory and peripheral device. output: The results of a comput[...]

User ’s Manual Glossary-12 Glossary R Radio frequency interference (RFI ) shield: A metal shield enclosing the printed circuit boa rds of the printer or computer to preven t radio and TV interference. All computer equ ipment generates radio frequency signals. The FCC regulates th e amount of signals a computing device can allow past it s shieldin[...]

User ’s Manual Glossary-13 Glossary soft key: Key combinations that emulate keys on the IBM keyboard, change some con figuration options, stop program execution, and access the nume ric keypad overlay . software: The set of programs, procedures and related documentation associated with a computer system. S p ecifically refers to computer programs[...]

User ’s Manual Glossary-14 Glossary window: A porti on of the screen that can display its own application, document or dialog box. Often used to mean a Microsoft Windows window . Wireless LAN: Local Area Network (LAN) throug h wireless communication. write protecti on: A method for protecting a floppy diskette from accidental erasure.[...]

User ’s Manual Index-1 Index A AC adaptor, 1-5 additional, 1-13 connecting, 3-3 DC IN 19V jack, 2-5 ASCII characters, 5-8 B Battery charging, 6-5 extending ba ttery life, 6-8 indicator, 2-2, 6-2 Monitoring capacity, 6-7 real time clock, 1-5, 6-4 save mode, 1-9 types, 6-3 Battery Charger, 8-7 Battery pack, 1-4, 2-7 additional, 8-7 replacing, 6-9 B[...]

User ’s Manual Index-2 H Hard disk drive automatic power off, 1-8 Heat dispersal, 1-9 Hibernation Mo de, 1-10 Hot keys, 1-8 Brightness (Down), 5-4 Brightness (Up), 5-4 Hibernate, 5-4 Lock, 5-3 Mute, 5-3 Output, 5-4 Power Plan, 5-3 Sleep, 5-4 TOSHIBA Zooming Utility (enlarge ), 5-5 TOSHIBA Zooming Utility (reduce), 5-5 Touch Pad, 5-5 Wireless, 5-4[...]

User ’s Manual Index-3 Battery, 9-5 Bluetooth, 9-13 Hard disk drive, 9-7 Hardware and s ystem checklist, 9-3 Keyboard, 9-6 LAN, 9-13 Memory Stick/Memory Stick PRO/ Memory Stick PRO Duo, 9-10 Overheating power down, 9- 4 Password, 9 -6 Power, 9-4 SD/SDHC memory card, miniSD/ microSD Card, 9-9 Self test, 9-3 Sound system, 9-10 System start-up, 9-3 [...]