Toshiba SD-K530SU manual

SD-K530SU OWNER’S MANUAL DVD VIDEO PLA YER & VIDEO CASSETTE RECORDER Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely . ©2004 T oshiba Corporation This device does not tape-record copy protected DVD Video Discs.[...]

2 Safety Precautions This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is [...]

INTRODUCTION 3 IMPORT ANT SAFETY INSTRUCTIONS CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL AND THOSE MARKED ON THE UNIT . RET AIN THIS BOOKLET FOR FUTURE REFERENCE. This set has been designed and manufactured to assure personal safety . Improper use can result in electric shock or fire hazard. The safeguar[...]

4 T able of Contents Introduction Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . 2 IMPORT ANT SAFETY INSTRUCTIONS . . . . . . . . . . 3 T able of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6 Playable Discs . . . . . . . . . . . . . . .[...]

INTRODUCTION 5 Before Use Playable Discs DVD (8 cm/12 cm disc) V ideo CD (VCD) (8 cm / 12 cm disc) Audio CD (8 cm/12 cm disc) In addition, this unit can play a DVD-R, CD-R or CD-RW that contains audio titles, MP3 or JPEG files. Notes  Depending on the conditions of the recording equip- ment or the CD-R/RW disc itself, some CD-R/R W discs cannot [...]

6 Before Use (Continued) Precautions Handling the unit When shipping the unit The original shipping carton and packing materials come in handy . For maximum protection, re-pack the unit as it was originally packed at the factory . When setting the unit The picture and sound of a nearby TV or radio may be distorted during playback. In this case, pos[...]

7 INTRODUCTION Front Panel OPEN/CLOSE Opens or closes the disc tray . Remote Sensor Point the DVD+VCR remote control here. Display window Shows the current status of the DVD+VCR. Disc T ray (DVD deck) Insert a disc here. ON/ST ANDBY Switches the DVD+VCR ON and OFF . LINE 2 (VIDEO IN/AUDIO IN (Left/Right)) Connect the audio/video output of an extern[...]

8 Display Window DVD VCR REC PM TV [P] DVD+VCR is in timer recording or a timer recording is programmed.(VCR part only) A cassette is in the VCR deck. The VCR deck is selected. DVD+VCR is Recording. (VCR part only) Indicates PM time. (AM is not displayed.) Lights when TV mode is active (See page 22.) A disc is in the DVD deck. (Lights when a disc i[...]

9 INTRODUCTION Rear Panel Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit. VCR IN LINE 1 (VIDEO IN/AUDIO IN (Left/Right)) Connect the audio/video output of an external source (Audio system, TV/Monitor , Another VCR). ANT .IN (ANTENNA INPUT) Connect the VHF/UHF/CA TV antenna [...]

10 Remote Control POWER Switches DVD+VCR ON and OFF . INPUT SELECT To select the VCR deck’ s source (Tuner , LINE 1, or LINE 2). CLK/CNT , DISPLA Y Accesses On-Screen display . Switches among the clock, tape counter and tape remaining modes on the display . DVD/VCR  To control DVD+VCR operating. TV  To control multi-brand TV . CABLE BOX [...]

Connections T ips  Depending on your TV and other equipment you wish to connect, there are various ways you could connect the DVD+VCR. Use connections described on pages 1 1-13.  Please refer to the manuals of your TV , VCR, Stereo System or other devices as necessary to make the best connections.  For better sound reproduction, connect th[...]

12 Connections (Continued) Basic TV Connections  Make one of the following connections, depending on the capabilities of your existing equipment. RF coaxial connection Connect the RF .OUT jack on the DVD+VCR to the antenna in jack on the TV using the 75-ohm Coaxial Cable supplied (R) . Note If you use this connection, tune the TV to the DVD+VCR?[...]

Connections (Continued) Optional, Preferred TV Connections Note Y ou can ONL Y listen to DVD playback using COAXIAL (X) , OPTICAL (O) and AUDIO OUT (A2) connections. The tuner and VCR will still be heard through the RF .OUT (R) or DVD/VCR AUDIO OUT (A1) jack. (See page 12.) Connecting to an amplifier equipped with two channel analog stereo or Dolby[...]

14 Before Operation - VCR Part On-Screen Display (OSD) Some of these functions will be displayed every time the VCR is operated. ❶❷ ❸ ❹ ❺ ❻❼ ❶ T APE SPEED DISPLA Y Shows the current tape speed. ❷ FUNCTION DISPLA Y Indicates the current function. ❸ HI-FI DISPLA Y Indicates when this unit is playing back tape recorded with Hi-Fi. [...]

PREP ARA TION 15 Setting the VCR Setup Menu 1 1 Press VCR MENU and the MAIN menu will appear . 2 2 Press v / V to select the SETUP menu, then press ENTER. The SETUP menu will appear . 3 3 Press v / V to choose a desired option on the SETUP menu. Then press b / B to choose a desired setting. FUNCTION OSD The on-screen display of this DVD+VCR can be [...]

16 Before Operation - VCR Part (Continued) Setting the Clock The DVD+VCR gives you two ways to set the time and date: the Auto Clock Feature or manually . The Auto Clock Feature enables the DVD+VCR to set up the clock when the DVD+VCR is turned off. Auto Clock Set The Auto Clock Set feature is set to ON at the factory . In the ON setting, the DVD+V[...]

17 PREP ARA TION Before Operation - DVD Part Caution: Before using the remote control, press the DVD/VCR button to select the device to be operated. Then press DVD/VCR SELECT button to select DVD mode. General Explanation This manual gives the basic instructions for operating this unit. Some DVDs require specific operation or allow only limited ope[...]

18 Before Operation - DVD Part (Continued) Initial Settings Y ou can set your own Personal Preferences on this unit. General Operation 1 1 Press SETUP . The setup menu appears. 2 2 Use v / V to select the desired item. The screen will show the current setting for the selected option, as well as alternate setting(s). 3 3 While the desired option is [...]

PREP ARA TION 19 Before Operation - DVD Part (Continued) Sound Digital Audio Output Each DVD disc has a variety of audio output options. Set the player ’s Digital Audio Output according to the type of audio system you use. DOLBY DIGIT AL/PCM: Select “DOLBY DIGIT AL/PCM” if you connected the DVD+VCR’s DIGIT AL AUDIO OUT jack to a Dolby Digit[...]

20 Before Operation - DVD Part (Continued) Parental Control Rating Movies on DVDs may contain scenes not suitable for children. Therefore, discs may contain Parental Control information that applies to the complete disc or to certain scenes on the disc. These scenes are rated from 1 to 8, and alternatively , more suitable scenes are available for s[...]

OPERA TION 21 Operation with tape Normal Playback Preparation:  T urn on the TV .  T une the TV to the DVD+VCR output channel (CH 3 or 4) or set the TV’ s source selector to VIDEO.  If a direct VIDEO/AUDIO connection is made between the DVD+VCR and the TV , set the TV’s source selector to VIDEO.  Set the Output Source to VCR as show[...]

22 Operation with tape (Continued) VISS (VHS Index Search System) The VHS INDEX SEARCH SYSTEM enables you to locate the beginning of any recording made on this VCR. Whenever a recording begins, an invisible INDEX mark is recorded on the tape. VISS Scan VISS SCAN lets you search out each VISS mark on the recorded tape and play 5 seconds before advan[...]

OPERA TION 23 Operation with tape (Continued) T imer Recording This DVD+VCR can be programmed to record up to 8 programs within a period of 1 year . For unattended recording, the timer needs to know the channels to be recorded and the starting and ending times. Preparation:  Tu r n on the power of both the DVD+VCR and the TV .  Be sure the TV[...]

24 Operation with tape (Continued) Checking (Erasing) the Timer Program Programming can be checked whenever the DVD+VCR is turned on. 1 Press VCR MENU and the MAIN menu will appear . 2 Use v / V to choose the PROGRAM menu. Press ENTER and the PROGRAM menu will appear . 3 Use b / B to select a program you want to check or erase. If you want to erase[...]

OPERA TION 25 Operation with tape (Continued) Dubbing and Editing If you wish to edit or dub your camcorder (or another VCR) recordings to this DVD+VCR, the rear (or Front) panel mounted Audio and Video (A/V) input jacks make the connections quick and easy . These direct A/V jacks will also provide better picture results than using the RF jack on t[...]

26 Operation with tape (Continued) VHS Hi-Fi Stereo System/ MTS Broadcast This DVD+VCR is equipped with the VHS Hi-Fi audio sound system for recording and playback. The informa- tion below gives a brief description of Hi-Fi audio and how to record and play a tape in the Hi-Fi audio mode. Playback with Hi-Fi Stereo Audio Sound A stereo TV with AUDIO[...]

OPERA TION 27 Operation with tape (Continued) T ape Counter Memory Feature Real-Time Counter Shows length of tape run in hours, minutes, and sec- onds. Press CLK/CNT to select the real-time counter display . Every press of CLK/CNT changes the TV screen as illustrated below .  Counter changes to “0:00:00” when the cassette is ejected.  The[...]

28 Operation with DVD and Video CD Playing a DVD and Video CD Playback Setup  T urn on the TV and select the video input source connected to the DVD+VCR.  Audio system: T urn on the audio system and select the input source connected to the DVD+VCR. 1 1 Press OPEN/CLOSE Z Z to open the disc tray . 2 2 Load your chosen disc in the tray , with t[...]

OPERA TION 29 Operation with DVD and Video CD (Continued) General Features (continued) Slow Motion 1 Press SLOW T during playback or still mode. The player will enter SLOW mode. 2 Press SLOW T repeatedly to select the required speed : T 1/16, T 1/8, T 1/4 or T 1/2 (forward). 3 To exit slow motion mode, press PLA Y N . Random 1 Press RANDOM during p[...]

30 Operation with DVD and Video CD (Continued) General Features (continued) Zoom The Zoom function allows you to enlarge the video image and to move through the enlarged image. 1 Press ZOOM during playback or still playback to activate the Zoom function. If you press ZOOM repeatedly , the magnification level increase up to six steps 2 Use the b B v[...]

OPERA TION 31 Operation with Audio CD and MP3/WMA Disc Playing an Audio CD and MP3/WMA Disc The DVD Player can play MP3/WMA formatted record- ings on CD-ROM, CD-R or CD-RW discs. Before playing MP3/WMA recordings, read the notes on MP3/WMA Recordings on right. 1 1 Insert a disc and close the tray . Audio CD; Audio CD menu appears on the TV screen g[...]

32 Operation with Audio CD and MP3/WMA Disc (Continued) Pause 1 Press P AUSE/STEP X X / / C C during playback. 2 To return to playback, press PLA Y N or press P AUSE/STEP X X / / C C again. Moving to another T rack   Press SKIP > or . briefly during playback to go to the next track or to return to the beginning of the current track.  ?[...]

OPERA TION 33 Operation with JPEG Disc V iewing a JPEG disc This DVD+VCR can play discs with JPEG files. Before playing JPEG recordings, read the notes on JPEG Recordings on right. 1 Insert a disc and close the tray . The MP3/WMA-JPEG choice menu appears on the TV screen. 2 2 Press v/V to select the JPEG then press ENTER. The JPEG menu appears on t[...]

34 Programmed Playback WMA MP3 VCD1.1 VCD2.0 CD Programmed Playback with Audio CD and MP3/WMA Disc The Program function enables you to store your favorite tracks from any disc in the player memory . Program can contain 30 tracks. 1 1 Press PROGRAM during playback or in the stop mode to enter the Program Edit mode. The mark will appear to the right [...]

OPERA TION 35 Additional Operation One T ouch Replay Press INST ANT REPLA Y during playback and the disc will reverse picture search through 10 seconds of play- back. And then the playback will start from the point again. Screen Saver A screen saver image appears when you leave the DVD Player in stop mode for about five minutes. V ideo Mode Setting[...]

The remote control can be compatible with various brands of TV/Cable box/DSS satellite receiver by setting their control codes. The TOSHIBA code has initially been set to control T OSHIBA TVs. Setting TV Control Codes 1. Press TV to set the remote control operating your TV . 2. While holding down PROGRAM button, enter the two digits of your TV’ s[...]

REFERENCE 37 Controlling Y our TV with the Supplied Remote (Continued) T able of TV Brand Codes Brand name of your TV Brand Code T oshiba 01 Bell & Howell 09 Carver 10 Celebrity 03 Citizen 12 Curtis Mathes 09, 12 Dumont 14 Electro band 03 Emerson 09, 1 1 Fisher 09 GE 02, 07, 1 1 Gibraiter 14 Goldstar 1 1 Hallmark 1 1 Hitachi 06 Infinity 10 JBL [...]

Controlling Y our Cable Box/DSS ® Satellite Receiver 38 Setting Cable Box/DSS ® Satellite Receiver Control Codes 1. Press CABLE BOX to set the remote control operating your Cable box/DSS ® Satellite Receiver . 2. While holding down PROGRAM button, enter the two digits of your Cable box/DSS ® Satellite Receiver Brand Code (listed on page 39) usi[...]

Controlling Y our Cable Box/DSS ® Satellite Receiver (Continued) REFERENCE 39 T able of Cable Box Brand Codes Brand name of your Cable box Brand Code T oshiba 36 Anvision 13, 20, 21, 22, 23, 24, 25, 26, 58, 62, 84 Archer 1, 20, 21, 29, 42, 44, 63, 88, 91 Cablestar 13, 20, 21, 22, 23, 24, 25, 26, 58, 62, 84 Cableview 30, 42, 44, 52, 63, 88 Citizen [...]

T roubleshooting 40 Symptom No power . The power is on, but the DVD+VCR does not work. No picture. No sound. The playback picture is poor . The DVD+VCR does not start playback. The remote control does not work properly . Cause  The power cord is disconnected.  No disc is inserted.  No tape is inserted.  The TV is not set to receive DVD+[...]

T roubleshooting (Continued) REFERENCE 41 Symptom Some channels are skipped over when using CH/TRK (+/-) Picture and sound of broadcasting channel are weak or missing. Camcorder image is not shown. Camcorder image via A/V input to DVD+VCR is not shown on TV screen. T imer recording is not possible. TIMER indicator appears after DVD+VCR is turned of[...]

42 Language Code List Code Language 6566 Abkhazian 6565 Afar 6570 Afrikaans 8381 Albanian 6577 Amharic 6582 Arabic 7289 Armenian 6583 Assamese 6588 Aymara 6590 Azerbaijani 6665 Bashkir 6985 Basque 6678 Bengali; Bangla 6890 Bhutani 6672 Bihari 6682 Breton 6671 Bulgarian 7789 Burmese 6669 Byelorussian 7577 Cambodian 6765 Catalan 9072 Chinese 6779 Cor[...]

REFERENCE 43 Country/Area Code List Code Country/Area AD Andorra AE United Arab Emirates AF Afghanistan AG Antigua and Barbuda AI Anguilla AL Albania AM Armenia AN Netherlands Antilles AO Angola AQ Antarctica AR Argentina AS American Samoa AT Austria AU Australia AW Aruba AZ Azerbaidjan BA Bosnia-Herzegovina BB Barbados BD Bangladesh BE Belgium BF [...]

44 Specifications General Power requirements AC 120V , 60 Hz Power consumption 19W Dimensions (approx.) 430 X 78.5 X 275 mm (16.9 X 3.1 X 10.8 inches) (w x h x d) Mass (approx.) 8.8 lbs (4.0 kg) Operating temperature 5 ˚ C to 40 ˚ C (41 ˚ F to 104 ˚ F) Operating humidity 5 % to 90 % Signal system NTSC Inputs ANTENNA IN 75 ohms (VHF/UHF/CA TV) V[...]

Limited United States W arranty DVD/VCR COMBINA TION - Exchange W arranty T oshiba America Consumer Products, L.L.C. (“T ACP”) makes the following limited warranties to original consumers in the United States. THESE LIMITED W ARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS DVD/VCR COMBINA TION AS A GIFT FROM THE[...]

How to Obtain W arranty Services If, after following all of the operating instructions in this manual and checking the section “T roubleshooting”, you find that service is needed: (1) For instructions on how to obtain warranty service for exchange program DVD/VCR COMBINA TIONs, contact T ACP’S toll free Call Center at 1-866-583- 7353. (2) Inc[...]

P/NO: 3834RV0004G Printed in Indonesia[...]