TP-Link TL-MR3220 manual

TL-MR3220 3G/4G Wireless N Router Rev: 2.0.0 1910010587[...]

COPYRIGHT & TRADEMARKS S pecifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., L TD. Other brands and product names are trademarks or registered trademarks of t heir respective holders. No part of th e specifications ma y be reproduced in any form or by any means or used to make any derivativ[...]

FCC ST A TEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable pr otection against harmful interference in a residential inst allation. This eq uipment generates, uses and can radiate radio frequency energy an d, i[...]

CE Mark W arning This is a class B product. In a domestic environment , this product may cause radio interference, in which case the user may be required to take adequate measures. National Restrictions This device is intended for home and office use in all EU countries (and ot her countries following the EU directive 1999/5/EC) wit hout any limita[...]

IMPORT ANT NOTE: Radiation Exposure S tatement: This equipment complies with Canada radiati on exposure limits set forth for an uncontrolled environment. This equipment should be install ed and operated with minimum distance 20cm between the radiator & your body . Ce dispositif est conforme à la norme CNR-210 d’Industrie Canada ap plicable a[...]

TP-LINK TECHNOLOGIES CO., L TD TP-LINK TECHNOLOGIES CO., L TD. Building 24 (floors 1, 3, 4, 5), and 28 (floors 1-4) Central Science and T echnology Park, Shennan Rd, Nanshan, Shenzhen, China DECLARA TION OF CONFORMITY For the following equipment: Product Description: 3G/4G Wireless N Router Model No.: TL-MR3220 T rademark: TP-LINK We declare under [...]

I CONTENTS Package C ontent s ....................................................................................................... 1 Chapter 1. Introduc tion ......................................................................................... 2 1.1 Overview of the Router.......................................................................[...]

II 4.7.1 DHCP Se ttings ............................................................................................... 46 4.7.2 DHCP Client s List ........................................................................................... 47 4.7.3 Address Rese rvation ................................................................................[...]

III 4.16.5 Backup & Re store ........................................................................................... 82 4.16.6 Rebo ot ............................................................................................................ 83 4.16.7 Password ...............................................................................[...]

TL-MR3220 3G/4G Wireless N Router User Guide -1- Package Contents The following items should be found in your package: ¾ TL-MR3220 3G/4G Wireless N Router ¾ DC Power Adapter for TL-MR322 0 3G/4G Wireless N Router ¾ Quick Install ation Guide ¾ Resource CD for TL-MR3220 3G/4G Wireless N Router, including: • This Guide • Other Helpful Informat[...]

TL-MR3220 3G/4G Wireless N Router User Guide -2- Chapter 1. Introduction 1.1 Overview of the Router TP-LINK understands the need for sharing the 3G /4G connection locally that benefits our en d users. We realize the convenience with our la test wireless N 3G/4G Routers ----- they give you the freedom to quickly set up a stable and hi gh speed wi re[...]

TL-MR3220 3G/4G Wireless N Router User Guide -3- ¾ Compatible with L TE/HSP A/UMTS/EVDO USB dongle ¾ Automatic 3G/4G / W AN failover ¾ Wireless N speed up to 150Mbps ¾ 1T2R MIMO, CCA technologies deliver greater coverage a nd higher speed ¾ Wireless security encryption eas ily at a push of “WPS” button ¾ WDS wireless bridge provides seaml[...]

TL-MR3220 3G/4G Wireless N Router User Guide -4- Off The USB 3G/4G modem is not connected. Slow Flash A wireless device is connecti ng to the network by WPS function. This process will la st in the fi rst 2 minutes. On A wireless device has be en succe ssfully added to the network by WPS function. （ WPS ） Quick Flash A wireless device failed to[...]

TL-MR3220 3G/4G Wireless N Router User Guide -5- 1.4.3 The Side Panel Figure 1-3 Side Panel sketch The following parts are lo cated on the si de plate (View from left to right). ¾ WIFI: This switch is an easy and convenient operati on for you to turn on or off the wireless network. ¾ USB: Connect to the USB Modem.[...]

TL-MR3220 3G/4G Wireless N Router User Guide -6- Chapter 2. Connecting the Router 2.1 System Requirement s ¾ Broadband Internet Access Service (DSL/Cable/Ethernet) ¾ One DSL/Cable Modem t hat has an RJ45 connector (which is not necessary if the Router is connected directly to the Ethernet.) ¾ PCs with a working Ethernet Adapter and an Ethernet c[...]

TL-MR3220 3G/4G Wireless N Router User Guide -7- Figure 2-1 Hardware Installation of the 3G/4G Wireless N Router – 3G/4G connection Figure 2-2 Hardware Installation of the 3G/4G Wireless N Router – W AN connection[...]

TL-MR3220 3G/4G Wireless N Router User Guide -8- Chapter 3. Quick Installation Guide This chapter will show you how to configure the basic functi ons of your 3G/4G Wireless N Router using Quick Setup Wizard within minutes. 3.1 TCP/IP Configuration The default IP address of the 3G/4G Wireless N R outer is 192.168.0.1. And the default Subnet Mask is [...]

TL-MR3220 3G/4G Wireless N Router User Guide -9- Figure 3-4 Login Windows ) Note: If the above screen does not pop-up, it means that your Web-browser has been set to a proxy . Go to T ools menu>Internet Options>Connections>LAN Settings , in the screen that a ppea rs, cancel the Using Proxy checkbox, and click OK to finish it. 2. After succ[...]

TL-MR3220 3G/4G Wireless N Router User Guide -10- Figure 3-4 Choose Internet Access Mode ¾ 3G/4G Preferred In this mode, the Router will try 3G/4G access first. If 3G/4 G access fails and WAN access is valid, or if no 3G/4G USB modem is inserted, the Router would switch to WAN access. Once the Router succeeds to connec t to the 3G/4G network, the [...]

TL-MR3220 3G/4G Wireless N Router User Guide -1 1- ¾ Location - Select the location where you're enjoying the 3G/4 G card. ¾ Mobile ISP - Select the ISP (Internet Service Provide r) you apply to for 3G/4G service. The Router will show the default Dial Number and APN of that ISP. If your ISP is not listed in the Mobile ISP , check the box bef[...]

TL-MR3220 3G/4G Wireless N Router User Guide -12- ¾ Channel - This field determines which operati ng frequency will be used. The default channel is set to Auto , so the AP will choose the best channel automatically. It is not necessary to change the wireless channel unle ss you notice interference problems with another nearby access point. ¾ Mode[...]

TL-MR3220 3G/4G Wireless N Router User Guide -13- Figure 3-8 Quick Setup – Finish After the rebooting, please chec k whether you can access the Internet or not in the 4.2 S tatus page.[...]

TL-MR3220 3G/4G Wireless N Router User Guide -14- Chapter 4. Configuring the Router This chapter will show each Web p age's ke y functions and the c onfiguration way . 4.1 Login After your successful login, you will see the fif t een main menus on the left of the Web-based utility . On the right, there are the corres ponding explanations and i[...]

TL-MR3220 3G/4G Wireless N Router User Guide -15- Figure 4-1 S tatus 4.3 Quick Setup Please refer to Section 3.2: "Quick Installation Guide." 4.4 WPS This section will guide you to add a new wire less device to an existing network quickly by WPS ( W i-Fi P rotected S etup) function. a). Choose menu “ WPS ”, you will see the next scree[...]

TL-MR3220 3G/4G Wireless N Router User Guide -16- Figure 4-2 WPS ¾ WPS St atus - Enable or disable the WPS function here. ¾ Current PIN - The current value of the Router's PIN displayed here. The default PIN of the Router can be found in the label or User Guide. ¾ Restore PIN - Restore the PIN of the Router to its default. ¾ Gen New PIN - [...]

TL-MR3220 3G/4G Wireless N Router User Guide -17- Step 3: W ait for a while until the next screen appears. Click Finish t o c o m p l e t e t h e W P S configuration. The WPS Configuration Screen of wireless adapter Method T wo: Step 1: Press the WPS/RESET button on the rear panel of the Router . Step 2: For the confi guration of the wirele ss adap[...]

TL-MR3220 3G/4G Wireless N Router User Guide -18- The WPS Configuration Screen of wireless adapter Step 3: W ait for a while until the next screen appears. Click Finish t o c o m p l e t e t h e W P S configuration. The WPS Configuration Screen of wireless adapter Method Three: Step 1: Keep the default WPS Stat us as Enabled and click the Add devic[...]

TL-MR3220 3G/4G Wireless N Router User Guide -19- Figure 4-3 Add A New Device Step 2: Choose Press the button of the new device in tw o minutes and click Connect . Step 3: For the confi guration of the wirele ss adapter , please choose Push the button on m y access point in the configuration utility of t he WPS as below , and click Next . The WPS C[...]

TL-MR3220 3G/4G Wireless N Router User Guide -20- The WPS Configuration Screen of Wireless adapter II. By PIN If the wireless adapter supports Wi-Fi Protecte d Setup or Quick Secure Setup and the PIN method, you can add it to the network by PIN with the following two methods. Method One: Enter the PIN into my Router Step 1: Keep the defau lt WPS St[...]

TL-MR3220 3G/4G Wireless N Router User Guide -21- The WPS Configuration Screen of wireless adapter ) Note: In this example, the default PIN code of this adapter is 16952898 as the above figure shown. Method T wo: Enter the PIN from my Router Step 1: Get the Current PIN code of the Router in Figure 4-2 (each Router has its unique PIN code. Here take[...]

TL-MR3220 3G/4G Wireless N Router User Guide -22- c). Y ou will see the following screen when t he new device successfully connected to the network. ) Note: 1) The status LED on the Router will light green all the time if the device has been successfully added to the network. 2) The WPS function cannot be confi gured if the Wireless Function of the[...]

TL-MR3220 3G/4G Wireless N Router User Guide -23- Figure 4-5 Internet Access ¾ 3G/4G Preferred In this mode, the Router will try 3G/4G access first; When 3G/4G access fails and WAN access is valid, or when no 3G/4G USB modem is inserted, the Router would switch to WAN access; When the Router succeeds to connect to the 3G/4G network, the Router wou[...]

TL-MR3220 3G/4G Wireless N Router User Guide -24- Router. If your USB modem inserted is supported by the Router , then “ Identify successfully ” will display in the 3G/4G USB Modem field as shown in Figure 4-6. ) Note : 3G/4G settings are unavailable when the Internet A ccess mode is set to WAN Only mode. Please change settings on Internet Acce[...]

TL-MR3220 3G/4G Wireless N Router User Guide -25- ¾ Connect Manually - You can configure the Router to make it connect or disconn ect manually. After a specified period of inactivity ( Max Idle Time ), the Router will disconnect your Internet connection, and not be able to re- establish your connec tion automatically as soon as you attempt to acce[...]

TL-MR3220 3G/4G Wireless N Router User Guide -26- ¾ Location / Mobile ISP – These two fields will display the location and the ISP you have selected in the previous page (shown in Figure 4-6). While you tick the below option Set th e Dial Number and APN manually , there will be no specific info rmation in these two fields. ¾ Set the Dial Number[...]

TL-MR3220 3G/4G Wireless N Router User Guide -27- To add 3G/4G USB Modem entries, follow the steps below. 1. Downl oad a most recent 3G/4G USB mode m configuration file from our website ( http://www .tp-link.com). 2. Click the Add Ne w ... button in Figure 4-8, and then you will see Figure 4-9. 3. Click Brow se… to select the path name where you [...]

TL-MR3220 3G/4G Wireless N Router User Guide -28- This page will display the W AN IP parameters assigned dynamically by your ISP , including IP address, Subnet Mask, Default Gateway , etc. Click the Renew button to renew the IP parameters from your ISP . Click the Release button to release the IP parameters. ¾ MTU Size (in bytes) - The normal MTU [...]

TL-MR3220 3G/4G Wireless N Router User Guide -29- ¾ Default Gatewa y - (Optional) Enter the gateway IP address in dotted-decimal notation provided by your ISP . ¾ MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet networks is 1500 Bytes. It is not recommended that y ou change the default MTU Size unless required by your[...]

TL-MR3220 3G/4G Wireless N Router User Guide -30- ¾ Connect on Demand - In this mode, the Internet connection can be terminated automatically after a spec ified inactivity period ( Max Idle T ime ) and be re-established when you attempt to access the Internet again. If you want your Internet connection keep s active all the time, please enter “0[...]

TL-MR3220 3G/4G Wireless N Router User Guide -31- ¾ Service Name/AC Name - The service name and AC (Acce ss Concentrator) name, which should not be configured unless you are sure it is necessary for your ISP . In most cases, leaving these fields blank will work. ¾ ISP S pecified IP Address - If your ISP does not a utomatica lly assign IP addresse[...]

TL-MR3220 3G/4G Wireless N Router User Guide -32- ¾ Auth Domain - T ype in the domain suffix server name based on your location. e.g. NSW / ACT - ns w.bigpond.net.au VIC / T AS / W A / SA / NT - vic.bigpond.net.au QLD - qld.bigpond.net.au ¾ MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet networks is 1500 Bytes. It is[...]

TL-MR3220 3G/4G Wireless N Router User Guide -33- Figure 4-15 L2TP Settings ¾ User Name/Passw ord - Enter the User Name and Password provided by your ISP . These fields are case-sensitive. ¾ Dynamic IP/ S tatic IP - Choose either as you ar e given by your ISP . Click the Connect button to connect immediately . Click the Disconnect button to disco[...]

TL-MR3220 3G/4G Wireless N Router User Guide -34- manually . After a specifie d period of inactivity ( Max Idle Time ), the Router will disconnect from your Internet connecti on, and you will not be able to re-establish your connection automatically as soon as you atte mpt to access the Internet agai n. T o use this option, click the radio button. [...]

TL-MR3220 3G/4G Wireless N Router User Guide -35- If you choose static IP and enter the dom ai n name, you should also enter the DNS assigned by your ISP . And click the Save button. Click the Connect button to connect immediately . Click the Disconnect button to disconnect immediately . ¾ Connect on Demand - Y ou can configure the Router to disco[...]

TL-MR3220 3G/4G Wireless N Router User Guide -36- Figure 4-17 MAC Address Clone Some ISPs require that you register the MA C Address of your adapter . Changes are rarely needed here. ¾ WAN MAC Address - This field displays the current MAC ad dress of the WAN port. If your ISP requires you to register the MAC address, please enter t he correct MAC [...]

TL-MR3220 3G/4G Wireless N Router User Guide -37- 2) If the new LAN IP Address you set is not in the same subnet, the IP Address pool of the DHCP server will change accordingly at the same time ， while the Virtual Server and DMZ Host will not take ef fect until they are re-configured. 4.6 Wireless Figure 4-19 Wireless menu There are five submenus[...]

TL-MR3220 3G/4G Wireless N Router User Guide -38- function of the Router in a region other than one of t hose specified in this field. If your country or region is not listed, please contact your local government agency for assistance. When you select your local region from the pull- down list, click the Save button , then the Note Dialog appears. [...]

TL-MR3220 3G/4G Wireless N Router User Guide -39- ¾ Enable WDS Bridging - Check this box to enable WDS Bri dging. With this function, the Router can bridge two or more WLANs. If this checkbox is selected, you will have to set the following parameters as shown below . Make sure the following settings are correct. ¾ SSID(to be bridged) - The SSID o[...]

TL-MR3220 3G/4G Wireless N Router User Guide -40- Figure 4-21 ¾ Disable Security - If you do not want to use wireless secu rity, select this check box, but it’s strongly recommended to choose one of t he following modes to enable security. ¾ WEP - It is based on the IEEE 802. 11 standard. If you select this check box, you will find a notice in [...]

TL-MR3220 3G/4G Wireless N Router User Guide -41- • Typ e - you can choose the type for the WEP se curity on the pull-down list. The default setting is Automatic , which can select Open System or Shared Key authentication type automatically based on the wirele ss station's capability and request. • WEP Key Format - Hexadecimal and ASCII fo[...]

TL-MR3220 3G/4G Wireless N Router User Guide -42- • Radius Server IP - Enter the IP address of the Radius Server. • Radius Port - Enter the port that radius service used. • Radius Password - Enter the password for the Radius Server. • Group Key Up date Peri od - Specify the group key update in terval in seconds. The value should be 30 or ab[...]

TL-MR3220 3G/4G Wireless N Router User Guide -43- Figure 4-25 Wireless MAC addre ss Filtering T o filter wireless users by MAC Address, click Enable . The default setting is Disabled . ¾ MAC Address - The wireless station's MAC address that you want to filter . ¾ Statu s - The status of this entry either Enabled or Disabled . ¾ Description [...]

TL-MR3220 3G/4G Wireless N Router User Guide -44- 3. Stat us - Select Enabled or Disabled for this entry on the Status pull-down list. 4. Click the Save button to save this entry . T o modify or delete an existing entry: 1. Click the Modify in the entry you want to modify . If you want to delete the entry , click the Delete . 2. Modify the informat[...]

TL-MR3220 3G/4G Wireless N Router User Guide -45- Figure 4-27 Wireless Advanced ¾ Beacon Interval - Enter a value between 20-1000 millise conds for Beacon Interval here. The beacons are the packets sent by the R outer to synchronize a wireless network. Beacon Interval value determines the time interval of the beacons. The default value is 100. ¾ [...]

TL-MR3220 3G/4G Wireless N Router User Guide -46- 4.6.5 Wireless Statistics Choose menu “ Wireless → Wireless St atistics ”, you can see the MAC A ddress, Current S tatus, Received Packets and Sent Packe ts for each connected wireless station. Figure 4-28 The Router attached wireless st ations ¾ MAC Address - The connected wireless station&a[...]

TL-MR3220 3G/4G Wireless N Router User Guide -47- Figure 4-30 DHCP Settings ¾ DHCP Server - Enable or Disable the DHCP server . If you disable the Server , you mu st have another DHCP server within your network or else you must configure the computer manually . ¾ St art IP Address - S pecify an IP address for the DHCP Serve r to start with when a[...]

TL-MR3220 3G/4G Wireless N Router User Guide -48- Figure 4-31 DHCP Clients List ¾ ID - The index of the DHCP Client ¾ Client Name - The name of the DHCP client ¾ MAC Address - The MAC address of the DHCP client ¾ Assigned IP - The IP address that the Router has allocated to the DHCP client. ¾ Lease Time - The time of the DHCP client leas ed. A[...]

TL-MR3220 3G/4G Wireless N Router User Guide -49- 1. Click the Add New … button. (Pop-up Figure 4-33) 2. Enter the MAC address (in XX-XX-XX-XX-XX-XX format.) and IP address in dotted-decimal notation of the computer you wish to add. 3. Click the Save button when finished. Figure 4-33 Add or Modify an Addres s Reservation Entry To modify or delete[...]

TL-MR3220 3G/4G Wireless N Router User Guide -50- Figure 4-35 Virtual Servers ¾ Service Port - The numbers of External Ports. Y ou can type a service port or a range of service ports (in XXX – YYY format, XXX is the start port number , YYY is the end port number). ¾ Internal Port - The Internal Servic e Port number of the PC running the service[...]

TL-MR3220 3G/4G Wireless N Router User Guide -51- Figure 4-36 Add or Modify a Virtual Server Entry ) Note : If your computer or server has more than one type of available service, please select another service, and enter the same IP Addr ess for that computer or server . To modify or delete an existing entry: 1. Click the Modify in the entry you wa[...]

TL-MR3220 3G/4G Wireless N Router User Guide -52- Figure 4-37 Port Triggering Once the Router is configured, the operation is as follows: 1. A local host makes an outgoing connection using a destination port number defined in the T rigger Port field. 2. The Router records this connection, opens t he incoming port or port s associated with this entr[...]

TL-MR3220 3G/4G Wireless N Router User Guide -53- 4. Select the protocol used for Incoming Ports from th e Incoming Protocol drop-do wn list, either TCP or UDP , or All. 5. Select Enable in Statu s field. 6. Click the Save button to save the new rule. Figure 4-38 Add or Modify a T riggering Entry T o modify or delete an existing entry: 1. Click the[...]

TL-MR3220 3G/4G Wireless N Router User Guide -54- Figure 4-39 DMZ T o assign a computer or server to be a DMZ server: 1. Click the Enable radio button. 2. Enter the local host IP Address in the DMZ Host IP Address field. 3. Click the Save button. ) Note : After you set the DMZ host, the firewa ll related to the host will not work. 4.8.4 UPnP Choose[...]

TL-MR3220 3G/4G Wireless N Router User Guide -55- z Status - The port’s status displayed here. “Enabl ed” means that port is still active. Otherwise, the port is inactive. Click Refresh to update the Current UPnP Settings List. 4.9 Security Figure 4-41 The Security menu There are four submenus under t he Security menu as shown in Figure 4-41:[...]

TL-MR3220 3G/4G Wireless N Router User Guide -56- traffic passing through the session conforms to the protocol. SPI Firewall is enabled by factory default. If you want all the comput ers on the LAN exposed to the outside world, you can disable it. ¾ VPN - VPN Passthrough must be enabled if you want to allow VPN tunnels using IPSec, PPTP, or L2TP p[...]

TL-MR3220 3G/4G Wireless N Router User Guide -57- Figure 4-43 Advanced Security ¾ Packets Statistics Interval (5~60) - The default value is 10. Se lect a value between 5 and 60 seconds from the drop-down list. The Pa ckets S tatistics Interval value indicates the time section of the packe ts statistics. The re sult of the statistics is used for an[...]

TL-MR3220 3G/4G Wireless N Router User Guide -58- ¾ TCP-SYN-FLOOD Packets Threshold (5~3600) - The default value is 50. Enter a value between 5 ~ 3600. When the current TCP-SYN-FLOOD Packets numbers is beyond th e set value, the Router will startup the blocking function immediately. ¾ Ignore Ping Packet From WAN Port - Enable or Disable Ignor e P[...]

TL-MR3220 3G/4G Wireless N Router User Guide -59- ) Note: If your PC is blocked but you w ant to access the Router again, use a pin to press and hold the RESET Button on the rear panel for about 5 seconds to reset the Router ’s factory defaults on the Router ’s W eb-Based Utility . 4.9.4 Remote Management Choose menu “ Security → Remote Man[...]

TL-MR3220 3G/4G Wireless N Router User Guide -60- Figure 4-46 Parental Control Settings ¾ Parental Control - Check Enable if you want this function to take effect, otherwise check Disable . ¾ MAC Address of Parental PC - In this field, enter the MAC address of the controlling PC, or you can make use of the Copy To Above button below. ¾ MAC Addre[...]

TL-MR3220 3G/4G Wireless N Router User Guide -61- 4. Enter the allowed domain name of the website, either the full name or the keywords (e.g. google) in the Allowed Domain Name field. Any domain name with keywords in it ( www.google.com , ww w.google.com.cn ) will be allowed. 5. Select from the Effective Time drop-down list the schedule (e.g. Sched[...]

TL-MR3220 3G/4G Wireless N Router User Guide -62- 3. Click “ Parental Control ” menu on the left to go back to the Add or Modify Parental Control Entry page: z Click Add New... button. z Enter 00-11-22-33-44-AA in the MAC Address of Child PC field. z Enter “Allow Google” in the Website Description field. z Enter “www.google.com” in the [...]

TL-MR3220 3G/4G Wireless N Router User Guide -63- 4.11.1 Rule Choose menu “ Access Control → Rule ”, you can view and set Access Control rules in the screen as shown in Figure 4-50. Figure 4-50 Access Control Rule Management ¾ Enable Internet Access Control - Select the check box to enable the Internet Access Control function, so the Default[...]

TL-MR3220 3G/4G Wireless N Router User Guide -64- 3. Select a host from the Host drop-down list or choose “ Click Here To Add New Host List ”. 4. Select a target from the Target drop-sown list or choose “ Click Here To Add New Target List ”. 5. Select a schedule from the Schedule drop-d own list or choose “ Click Here To Add New Schedule [...]

TL-MR3220 3G/4G Wireless N Router User Guide -65- 4.11.2 Host Choose menu “ Access Control → Host ”, you can view and set a Host list in the screen as shown in Figure 4-52. The host list is necessa ry for the Access Control Rule. Figure 4-52 Host Settings ¾ Host Description - Here displays the description of t he host and this description is[...]

TL-MR3220 3G/4G Wireless N Router User Guide -66- Figure 4-54 Add or Modify a Host Entry For example : If you desire to restrict the internet activities of host with MAC address 00-11-22-33-44-AA, you should first follow the settings below: 1. Click Add New... button in Figure 4-52 to enter the Add or Modify a Host Entry page. 2. In Mode field, sel[...]

TL-MR3220 3G/4G Wireless N Router User Guide -67- 2. In Mode field, select IP Address or Domain Name. z If you select IP Address , the screen shown is Figure 4-56. 1) In Target Description field, create a unique descri ption fo r the target (e.g. Target_1). 2) In IP Address field, enter the IP address of the target. 3) Select a common service from [...]

TL-MR3220 3G/4G Wireless N Router User Guide -68- For example : If you desire to restrict the internet activities of host with MAC address 00-11-22-33-44-AA in the LAN to access www.google.com only, you should first follow the settings below: 1. Click Add New … button in Figure 4-55 to enter the Add or Modify an Access Target Entry page. 2. In Mo[...]

TL-MR3220 3G/4G Wireless N Router User Guide -69- 4. In Time field, you can select all day-24 hours or you may enter the Start Time and Stop Time in the corresponding field. 5. Click Save to complete the settings. Figure 4-59 Advanced Schedule Settings For example : If you desire to restrict the internet activities of host with MAC address 00-11-22[...]

TL-MR3220 3G/4G Wireless N Router User Guide -70- 4.12.1 Static Routing List Choose menu “ Advanced Routing → S t atic Routing List ”, you can configur e the static route in the next screen (shown in Figure 4-61). A static route is a pre-determine d path that network information must travel to r each a specific host or network. Figure 4-61 S [...]

TL-MR3220 3G/4G Wireless N Router User Guide -71- 4.12.2 System Routing Table Choose menu “ Advanced Routing → System Routing T able ”, you can configure the system routing table in the next screen (shown in Figure 4-63). System routing table views all of the valid route en tries in use. Figure 4-63 System Routing T able ¾ Destination Networ[...]

TL-MR3220 3G/4G Wireless N Router User Guide -72- Figure 4-65 Bandwidth Control Settings ¾ Enable Bandwidth Control - Check this box so that the Bandwidth Control settings can take effect. ¾ Line Type - Select the r ight type for you network connection. If you don’t know how to choose, please ask your ISP for the information. ¾ Egress Bandwidt[...]

TL-MR3220 3G/4G Wireless N Router User Guide -73- Figure 4-67 Bandwidth Control Rule Settings 3. Click the Save button. 4.14 IP & MAC Binding Figure 4-68 the IP & MAC Binding menu There are two submenus under the IP &MAC Binding menu (shown in Figure 4-68): Binding Settings an d ARP List . Click either of them, and you w ill be able to [...]

TL-MR3220 3G/4G Wireless N Router User Guide -74- When you want to add or modify an IP & MAC Binding entry, you can click the Add New … button or Modify button, and then you will go to the nex t page. This page is used for adding or modifying an IP & MAC Binding entry (shown in Figure 4-70). Figure 4-70 IP & MAC Binding Setting (Add &[...]

TL-MR3220 3G/4G Wireless N Router User Guide -75- 4.14.2 ARP List T o manage the computer , you could observe th e computers in the LAN by checking the relationship of MAC address and IP address on the ARP list, and you coul d configure the items on the ARP list also. This page displays the ARP Li st; it shows all the existing IP & MAC Binding [...]

TL-MR3220 3G/4G Wireless N Router User Guide -76- Figure 4-73 Comexe.cn DDNS Settings To set up for DDNS, follow these instructions: 1. T ype the Domain Name received from your dynamic DNS service provider . 2. T ype the User Name for your DDNS account. 3. T ype the Password for your DDNS account. 4. Click the Login button to log in to the DDNS ser[...]

TL-MR3220 3G/4G Wireless N Router User Guide -77- To set up for DDNS, follow these instructions: 1. T ype the User Name for your DDNS account. 2. T ype the Password for your DDNS account. 3. T ype the Domain Name you received from dynamic DNS service provider here. 4. Click the Login button to log in to the DDNS service. Connection Status - The sta[...]

TL-MR3220 3G/4G Wireless N Router User Guide -78- 4.16 Sy stem T ools Figure 4-76 The System T ools menu Choose menu “ System T ools ”, and you can see the s ubmenus under the main menu: Tim e Settings , Diagnostic , Firm w are Upgrade , Factory Default s, Backup & Restore , Reboot , Password , System Log and St atistics . Click any of them[...]

TL-MR3220 3G/4G Wireless N Router User Guide -79- ¾ NTP Server I/I I - Enter the address for the NTP Server , then the Ro uter will get the time from the NTP Server preferentially . In addi tion, the Router built-in some common NTP Servers, so it can get time automatic ally once it connect s the Internet. T o configure the system manually: 1. Sele[...]

TL-MR3220 3G/4G Wireless N Router User Guide -80- Figure 4-78 Diagnostic T ools ¾ Diagnostic T ool - Check the radio button to select one diagnostic too. z Ping - This diagnostic tool troubleshoots connecti vity , reachability , and name resolution to a given host or gateway . z T raceroute - This diagnostic tool tests the performance of a connect[...]

TL-MR3220 3G/4G Wireless N Router User Guide -81- Figure 4-79 Diagnostic Results ) Note: Only one user can use this tool at one time. Options “Number of Pings”, “Ping Size” and “Ping T imeout” are used for Ping function. Option “T racert Hops” are used for T racert function. 4.16.3 Firmware Upgrade Choose menu “ System T ools → [...]

TL-MR3220 3G/4G Wireless N Router User Guide -82- ) Note: 1) New firmware vers ions are posted at http://www.tp-link.com and can be downloaded for free . There is no need to u pgrade the firmware unle ss the new firm ware has a new feature you want to use. However, when experie ncing prob lems caused by the Rout er rather than the configuration, yo[...]

TL-MR3220 3G/4G Wireless N Router User Guide -83- • Click the Browse… button to locate the upd ate file for the Router , or enter the exact path to the Setting file in the text box. • Click the Restore button. ) Note: The current configuration will be covered by the uploading configur ation file. The upgrade process lasts for 20 seconds and t[...]

TL-MR3220 3G/4G Wireless N Router User Guide -84- It is strongly recommended that you should c hange the factory default user name and password of the Router, because all user s who try to access the Rout er's Web-based utility or Quick Setup will be prompted for the Router 's default user name and password. ) Note: The new user name and [...]

TL-MR3220 3G/4G Wireless N Router User Guide -85- Figure 4-86 Mail Account Settings z From - Your mail box address. The Router would connect it to send logs. z To - Recipient’s address. The destination mailbox where the logs would be received. z SMTP Server - Your smtp server. It corresponds wi th the mailbox filled in the From field. You can log[...]

TL-MR3220 3G/4G Wireless N Router User Guide -86- ¾ Log Level - By selecting the log level, only logs of this level will be shown. ¾ Refresh - Refresh the page to show the latest log list. ¾ Save Log - Click to save all the logs in a txt file. ¾ Mail Log - Click to send an email of current logs manually according to the address and validation i[...]

TL-MR3220 3G/4G Wireless N Router User Guide -87- Statistics Table: IP/MAC Address The IP and MAC address are displayed with related statistics. Packets The total nu mber of packets received and transmitted by the Router. Total Byt es The total number of bytes received and transmitted by the Router. Packets The total number of packets received and [...]

TL-MR3220 3G/4G Wireless N Router User Guide -88- Appendix A: FAQ 1. How do I configure the Router to access Internet by ADSL users? 1) First, configure the ADSL Modem configured in RFC1483 bridge model. 2) Connect the Ethernet cable from your AD SL Modem to the W AN port on the Router . The telephone cord plugs into the Line port of the ADSL Modem[...]

TL-MR3220 3G/4G Wireless N Router User Guide -89- 2) Some ISPs r equire that you register the MAC Address of your adapt er , which is connected to your cable/DSL Modem during installation. If your ISP requires MAC register , login to the Router and click the "Network " menu link on the left of your browser , and th en click "MAC Clon[...]

TL-MR3220 3G/4G Wireless N Router User Guide -90- Figure A-5 Add or Modify a Virtual server Entry ) Note: Your opposite side should call your WAN IP , which is displayed on the “Status” page. 4) How to enable DMZ Host: Log in to the Router , click the “ Forw arding ” menu on the lef t of your browser , and click " DMZ " submenu. O[...]

TL-MR3220 3G/4G Wireless N Router User Guide -91- Figure A-7 Basic Security 4. I want to build a WEB Server on the LAN, what should I do? 1) Because the WEB Server port 80 will inte rfere with the WEB m anagement port 80 on the Router , you must change the WEB management port number to avoid interference. 2) T o change the WEB management port numbe[...]

TL-MR3220 3G/4G Wireless N Router User Guide -92- Figure A-9 Virtual Servers Figure A-10 Add or Modify a Virtual server Entry 5. The wireless stations cannot connect to the Router . 1) Make sure the " Wireless Router Radio " is enabled. 2) Make sure that the wireless stations' SSID accord with the Router's SSID. 3) Make sure the[...]

TL-MR3220 3G/4G Wireless N Router User Guide -93- Appendix B: Configuring the PCs In this section, we’ll introduce how to install and configure the TCP/IP correctly in Windows XP . First make sure your Ethernet Adapter is wo rking, refer to the adapter ’s manual if needed. 1. Install TCP/IP component 1) On the Windows taskbar , click the Start [...]

TL-MR3220 3G/4G Wireless N Router User Guide -94- Figure B-2 5) The following TCP/IP Properties window will display and the IP Address tab is open on this window by default. Y ou have two ways to configure the TCP/IP protocol below: ¾ Setting IP address automatically Select Obt ain an IP address automatically , Choose Obt ain DNS server automatica[...]

TL-MR3220 3G/4G Wireless N Router User Guide -95- Figure B-3 ¾ Setting IP address manually a. Select Use the follo w ing IP address radio button. And the fo llowing items available b. If the Router's LAN IP addr ess is 192.168.0.1, type IP addre ss is 192.168.0.x ( x is from 2 to 254), and Subnet mask is 255.255.255.0. c. T ype the Router ’[...]

TL-MR3220 3G/4G Wireless N Router User Guide -96- Figure B-4 6) Now click OK to keep your settings.[...]

TL-MR3220 3G/4G Wireless N Router User Guide -97- Appendix C: Specifications General S tandards IEEE 802.1 1n, IEEE 802.1 1b, I EEE 802.1 1g, IEEE 802.3, IEEE 802.3u, IEEE 802.1x, IEEE 802.1 1e, IEEE 802.1 1i, IEEE 802.3x Protocols TCP/IP , PPPoE, DHCP , ICMP , NA T , SNTP Ports One RJ45 W AN port, Four RJ45 LAN ports, One USB 2.0 W AN port (for 3G[...]

TL-MR3220 3G/4G Wireless N Router User Guide -98- Appendix D: Glossary ¾ 802.11n - 802.11n builds upon previous 802.11 standar ds by adding MIMO (multiple-input multiple-output). MIMO uses mu ltiple transmitter and receiver antennas to allow for increased data throughput via spatial multiplexing and increa sed range by exploiting th e spatial dive[...]

TL-MR3220 3G/4G Wireless N Router User Guide -99- 152-bit shared key algorithm, as des cribed in the IEEE 802.11 standard. ¾ Wi-Fi - A trade name for the 802.11b wireless network ing standard, given by the Wireless Ethernet Compatibility Alliance (WECA, see http://www.wi-fi.net), an indus try standards group promoting interoper ability among 802.1[...]

TL-MR3220 3G/4G Wireless N Router User Guide -100- Appendix E: Compatible 3G/4G USB Modem The UMTS/HSP A/EVDO USB modems we’ve tested in the field are listed below . Y ou can find the latest compatibility li st in our website: http://www.tp-link.com . Compatible 3G/4G USB Modem (Tested in the field) HUAWEI E398(4G), E392(4G), E122, E1262, E1550, [...]