Ir para a página of
Manuais similares
-
Access Point
Ubiquiti Networks UniFi AP
24 páginas -
Access Point
Ubiquiti Networks UAP-PRO-3
63 páginas -
Access Point
Ubiquiti Networks AF-24
36 páginas -
Access Point
Ubiquiti Networks UAP-LR
16 páginas -
Access Point
Ubiquiti Networks UAP-AC-3
57 páginas -
Access Point
Ubiquiti Networks UNIFI AP AC LITE 5PK POE NOT
63 páginas -
Access Point
Ubiquiti Networks airFiber AF-5X
50 páginas -
Access Point
Ubiquiti Networks Bullet 2HP
36 páginas
Bom manual de uso
As regras impõem ao revendedor a obrigação de fornecer ao comprador o manual com o produto Ubiquiti Networks AF-5. A falta de manual ou informações incorretas fornecidas ao consumidor são a base de uma queixa por não conformidade do produto com o contrato. De acordo com a lei, pode anexar o manual em uma outra forma de que em papel, o que é frequentemente utilizado, anexando uma forma gráfica ou manual electrónicoUbiquiti Networks AF-5 vídeos instrutivos para os usuários. A condição é uma forma legível e compreensível.
O que é a instrução?
A palavra vem do latim "Instructio" ou instruir. Portanto, no manual Ubiquiti Networks AF-5 você pode encontrar uma descrição das fases do processo. O objetivo do manual é instruir, facilitar o arranque, a utilização do equipamento ou a execução de determinadas tarefas. O manual é uma coleção de informações sobre o objeto / serviço, um guia.
Infelizmente, pequenos usuários tomam o tempo para ler o manual Ubiquiti Networks AF-5, e um bom manual não só permite conhecer uma série de funcionalidades adicionais do dispositivo, mas evita a formação da maioria das falhas.
Então, o que deve conter o manual perfeito?
Primeiro, o manual Ubiquiti Networks AF-5 deve conte:
- dados técnicos do dispositivo Ubiquiti Networks AF-5
- nome do fabricante e ano de fabricação do dispositivo Ubiquiti Networks AF-5
- instruções de utilização, regulação e manutenção do dispositivo Ubiquiti Networks AF-5
- sinais de segurança e certificados que comprovam a conformidade com as normas pertinentes
Por que você não ler manuais?
Normalmente, isso é devido à falta de tempo e à certeza quanto à funcionalidade específica do dispositivo adquirido. Infelizmente, a mesma ligação e o arranque Ubiquiti Networks AF-5 não são suficientes. O manual contém uma série de orientações sobre funcionalidades específicas, a segurança, os métodos de manutenção (mesmo sobre produtos que devem ser usados), possíveis defeitos Ubiquiti Networks AF-5 e formas de resolver problemas comuns durante o uso. No final, no manual podemos encontrar as coordenadas do serviço Ubiquiti Networks na ausência da eficácia das soluções propostas. Atualmente, muito apreciados são manuais na forma de animações interessantes e vídeos de instrução que de uma forma melhor do que o o folheto falam ao usuário. Este tipo de manual é a chance que o usuário percorrer todo o vídeo instrutivo, sem ignorar especificações e descrições técnicas complicadas Ubiquiti Networks AF-5, como para a versão papel.
Por que ler manuais?
Primeiro de tudo, contem a resposta sobre a construção, as possibilidades do dispositivo Ubiquiti Networks AF-5, uso dos acessórios individuais e uma gama de informações para desfrutar plenamente todos os recursos e facilidades.
Após a compra bem sucedida de um equipamento / dispositivo, é bom ter um momento para se familiarizar com cada parte do manual Ubiquiti Networks AF-5. Atualmente, são cuidadosamente preparados e traduzidos para sejam não só compreensíveis para os usuários, mas para cumprir a sua função básica de informação
Índice do manual
-
Página 1
5 GHz Point to Point 1.0+ Gbps Radio Model: AF-5, AF-5U[...]
-
Página 2
[...]
-
Página 3
1 Introduction Introduction Thank you f or purchasing the Ubiquiti Networks® airF iber® 5GHz Point-t o-Point 1.0+ Gbps Radio . This Quick Start Guide is designed to guide you through the installation, sho w you how to access the airFiber C onfiguration Interface, and explain how t o set up an airFiber link. T his Quick Start Guide also include[...]
-
Página 4
2 airFiber® AF-5/AF-5U Quick Start Guide Hardware Overview Side Grounding Point Elevation Rod Hex Nut to adjust Elevation Rod Pre-Installed M10 x25 Flanged Bolts Lanyard Attachment Loop Lanyard Attachment Loop Assembled View[...]
-
Página 5
3 Hardware Overview Inter faces GPS MASTER LINK RESET OVERLOAD 8X 6X 4X TO 0.25X REMOTE LOCAL MANAGEMENT D ATA AUX ACT SPEED ACT SPEED Interface Description Reset Button T o reset to factory defaults, press and hold the Reset button for more than fiv e seconds while the unit is already powered on. Remote Display Displays the receiv ed signal streng[...]
-
Página 6
4 airFiber® AF-5/AF-5U Quick Start Guide LEDs GPS MASTER LINK RESET OVERLOAD 8X 6X 4X to 0.25X REMOTE LOCAL AUX MANAGEMENT D ATA ACT SPEED ACT SPEED LED State Status GPS Off No GPS Synchronization On Operational (Strong Signal) Normal Flash* Non-Operational ( Weak Signal) Master Off Slave mode On Master mode Link Off RF Off Short Flash* Syncing No[...]
-
Página 7
5 Hardware Overview LED State Status Local On Displays the receiv ed signal strength in dBm of the local airFiberr adio. Overload F ast Flash Overload Condition (reserved) – – 8x On 256QAM MIMO 6x On 64QAM MIMO 4x to 0.25x On 16QAM MIMO Long Flash* QPSK MIMO Normal Flash* 1x QPSK xRT ™ ** Short Flash* ¼x QPSK xRT** * Short Flash (1:3 on/o[...]
-
Página 8
6 airFiber® AF-5/AF-5U Quick Start Guide Installation Requirements Pre-A ssembly T ool • 13 mm wrench P ole-Mounting T ool • 17 mm wrench Other Requirements • Clear line of sight between airF iber radios • Clear view of the sky for proper GPS operation • V er tical mounting orientation • Mounting location with < 0.5 ° displacement [...]
-
Página 9
7 Installation Overview Installation Over view W e recommend that you configure your paired airF iber radios before mounting . Below is an overview of the installation with specific details in the following instructions: • Connect Po wer over Ethernet to the Data port, and connect an Ethernet cable between your comput er and the Managementpor [...]
-
Página 10
8 airFiber® AF-5/AF-5U Quick Start Guide 2. Connect an Ethernet cable to the Data port. GPS MASTER LINK RESET OVERLOAD 8X 6X 4X to 0.25X REMOTE LOCAL AUX MANAGEMENT DATA ACT SPEED ACT SPEED 3. Connect the other end of the Ethernet cable from the Data port to the Ethernet por t labeled POE on the GigE PoE Adapter . 4. Connect the Power C ord to the[...]
-
Página 11
9 airFiber C onfiguration airF iber Configuration The instructions in this section explain how to access the airFiber Configuration Interface and configure the follo wing settings: • Wireless Mode Configure one airF iber radio as the Master and the other as the Slave . • Duplex The airFiber r adio suppor ts both half-duplex and full-duplex oper[...]
-
Página 12
10 airFiber® AF-5/AF-5U Quick Start Guide 1. Connect an Ethernet cable from your comput er to the Management port on the airFiber radio . GPS MASTER LINK RESET OVERLOAD 8X 6X 4X to 0.25X REMOTE LOCAL AUX MANAGEMENT DATA ACT SPEED ACT SPEED 2. Configure the Ethernet adapt er on your computer with a static IP address on the 192.168.1.x subnet. 3. La[...]
-
Página 13
11 airFiber C onfiguration 5. The Main tab will appear . Click the T ools drop-down and select Link Calculator . This tool will guide y ou on how to best minimize bandwidth and power/int er ference issues . Note: If you do not see the Link Calculator , then upgrade the firmware on your airF iber radios. Download the firmware at: downloads .ubnt.com[...]
-
Página 14
12 airFiber® AF-5/AF-5U Quick Start Guide 9. Configure the Wireless Security : a. Selec t the AES Key T ype , HEX or ASCII . b. For the Key field: - HEX Enter 16 bytes (eight, 16-bit HEX values: 0-9, A-F , or a-f ). Y ou can omit zeroes and use colons, similar to the IPv6 format. Note: The airF iber Configuration Interface suppor ts IPv6 formats e[...]
-
Página 15
13 Hardware Installation Hardware Installation The mounting hardware of the airF iber radio can be pre-assembled before pole-mounting . Mounting Hardware P re-Assembly 1. Insert two M10x150 Carriage Bolts into the Lower Mount Br acket . 2. Insert two M10x150 Carriage Bolts into the Upper Mount Bracket with Elevation Rod .[...]
-
Página 16
14 airFiber® AF-5/AF-5U Quick Start Guide 3. Attach the Lo wer Mount Brack et to the I-Brack et using two M8x14 Serrated Flange Bolts . Ensure that the slots fac e up and securely tighten the bolts. Proper slot orientation[...]
-
Página 17
15 Hardware Installation 4. Attach the Upper Mount Brack et with Elevation Rod to the I-Brack et using two M8x14 Serrated F lange Bolts . Note: Ensure that the orientation of the Upper Mount Brack et matches the illustration below , with the Elevation Rod on the correct side.[...]
-
Página 18
16 airFiber® AF-5/AF-5U Quick Start Guide 5. Attach the P ole Clamps to the Mount Brack ets . a. Slide the slotted hole of each Pole Clamp over one upper and one lower M10x150 CarriageBolt . b. Place one M10 Serrated Flange Nut on each M10x150 Carriage Bolt .[...]
-
Página 19
17 Hardware Installation 6. Attach the Azimuth Support Bracket s together . a. Inser t the two M10x100 Carriage Bolts into the Azimuth Support Bracket that has two slotted holes . b. Slide the slotted hole of the other Azimuth Suppor t Bracket over one M10x100Carriage Bolt . c. Place one M10 Serrated F lange Nut on each M10x100 Carriage Bolt . 7[...]
-
Página 20
18 airFiber® AF-5/AF-5U Quick Start Guide P ole-Mounting 1. Attach the Azimuth Support Brackets to the pole just beneath the area where the airF iber radio will be attached. Note: The mounting assembly can accommodate a Ø 38.1 - 101.6 mm (1.5" - 4.0") pole. a. Orient the A zimuth Support Brackets around the pole so it is aimed in the di[...]
-
Página 21
19 Hardware Installation 2. Attach the mounting assembly to a pole . a. Orient the mounting assembly around the pole so it is aimed in the direction of the other airFiber radio . b. Slide the open slot of each Pole Clamp ov er the corresponding M10x150 CarriageBolt. c. Tighten the M10 Serrated Flange Nuts of the M10x150 CarriageBolts to secur[...]
-
Página 22
20 airFiber® AF-5/AF-5U Quick Start Guide 3. Lift the airFiber radio and align the tw o lower Pre-Installed M10x25 Flanged Bolts with the slots on the L ower Mount Brack et . Seat the bolts in the slots.[...]
-
Página 23
21 Hardware Installation 4. Align the two upper Pre-Installed M10x25 F langed Bolts of the airFiber r adio nex t to the slots on the Upper Mount Brack et . Lift the airFiber r adio and seat the bolts in theslots.[...]
-
Página 24
22 airFiber® AF-5/AF-5U Quick Start Guide 5. Attach a ground wire: a. Remove the nut from the Grounding Point . b. Attach a ground wire (min. 8 A WG or 10 mm 2 ) to the lug and replace the nut to secure the wire . c. Secure the other end of the ground wire to a grounded mast, pole, t ower , or grounding bar . W ARNING: F ailure to properly ground [...]
-
Página 25
23 Connecting Ethernet Connecting Ethernet 1. Push the button and slide the port cover do wn to access cableports. ( The por t cover cannot be complet ely removed .) 2. Connect the Data/PoE E thernet cable: a. Feed an outdoor , shielded CA T6 cable up through the rightmost cable feed slot on the bottom of the port cover . b. Connect the cable to[...]
-
Página 26
24 airFiber® AF-5/AF-5U Quick Start Guide 3. Connect the other end of the Ethernet cable from the Data port to the Ethernet por t labeled POE on the GigE PoE Adapter . 4. Connect an Ethernet cable from your netw ork to the Ethernet port labeled L AN on the GigE PoE A dapter . 5. Connect the Power C ord to the power por t on the GigE PoE Adapter . [...]
-
Página 27
25 Connecting Ethernet Below is a diagram of a finished installation with recommended surge protectors installed . Ground to Pole , T ower , or Grounding Block: Max. 1 m from Ground Bonding Point Max. 1 m GigE PoE Adapter Power Source Outdoor GigE PoE Surge Protector Outdoor GigE PoE Surge Protector[...]
-
Página 28
26 airFiber® AF-5/AF-5U Quick Start Guide Alignment Tips • T o accurately align the airFiber radios f or best per formance, you MUST align only one end of the link at a time. • F or more convenient alignment, y ou may consider using long-range scopes (not included) temporarily attached t o your airFiber r adios. • Y ou may need to use additi[...]
-
Página 29
27 Alignment Establishing a Link Adjust the positions of the Master and the Slave t o establish a link. Note: The Master must be aimed first at the Slave because the Slave does not transmit an y RF signal until it detec ts transmissions from the Master . 1. Ensure that the following bolts and nuts ar e loose: • F our Pre-Installed M10x25 Flanged [...]
-
Página 30
28 airFiber® AF-5/AF-5U Quick Start Guide 3. Master Visually aim the Master at the Slave . T o adjust the Master 's position: a. Rotate the airFiber radio on the pole to align the azimuth. b. Use the hex nut on the Elevation Rod to adjust the elev ation. Note: Do NO T make simultaneous adjustments on the Master and Slave . 4. Slave Visually a[...]
-
Página 31
29 Alignment 6. Slave Aim the Slav e at the Master to achieve the strongest signal level on the Remote LED Display of the Slave . Note: V alues on the LED Displays are displayed in negative (-) dBm. F or example, 67 represents a receiv ed signal level of -67 dBm. Smaller numerical values indicat e stronger received signallev els. For example , a[...]
-
Página 32
30 airFiber® AF-5/AF-5U Quick Start Guide There are three methods f or determining the received signal level: • LED Displays (described abov e) • airF iber Configuration Interface (webpage) • Audio tone (optional equipment requir ed) Refer to the airF iber AF-5/AF-5U User Guide for instructions on the airFiber C onfiguration Inter face and a[...]
-
Página 33
31 Specifications Specifications airFiber AF-5/AF-5U Dimensions 938.4 x 468.4 x 281.4 mm (36.94 x 18.44 x 11.08 in) W eight Mount Not Included Mount Included 11.5 kg (25.35 lb) 16 kg (35.27 lb) Operating F requency AF-5 FCC 15.247, 15.407, IC RSS 210 ETSI EN 301 893, EN 302 502 Other Regions 5470 - 5600 MHz, 5650 - 5850 MHz 5470 - 5875 MHz 5470 - 5[...]
-
Página 34
32 airFiber® AF-5/AF-5U Quick Start Guide Receive Sensitivity Spatial Streams Modulation Sensitivity (10 MHz) Sensitivity (20 MHz) FDD Capacity* TDD Capacity* 8x 256QAM -70 dBm -67 dBm 1024 Mbps 512 Mbps 6x 64QAM -77 dBm -74 dBm 768 Mbps 384 Mbps 4x 16QAM MIMO -84 dBm -81 dBm 512 Mbps 256 Mbps 2x QPSK MIMO -90 dBm -87 dBm 256 Mbps 128 Mbps 1x ½ R[...]
-
Página 35
33 Safety Notices Safety Notices 1. Read, follow , and k eep these instructions. 2. Heed all warnings. 3. Only use attachments/accessories specified by the manufacturer . W ARNING: Do not use this product in location that can be submerged by water . W ARNING: Av oid using this produc t during an electrical storm. There may be a remot e risk of elec[...]
-
Página 36
34 airFiber® AF-5/AF-5U Quick Start Guide Limited W arranty UBIQUITI NET WORKS, Inc (“UBIQUITI NET WORKS”) warrants that the product(s) furnished hereunder (the “Product(s)”) shall be free from defects in material and workmanship for a period of one (1) year from the date of shipment by UBIQUITI NET WORKS under normal use and operation. UB[...]
-
Página 37
35 Limited W arranty Disclaimer EX CEPT FOR ANY EXPRESS W ARRANTIES PROVIDED HEREIN, UBIQUITI NET WORKS, ITS AFFILIA TES, AND ITS AND THEIR THIRD P AR T Y Data, SERVICE, SOFT W ARE AND HARDW ARE PROVIDERS HEREBY DISCLAIM AND MAKE NO OTHER REPRESENT A TION OR W ARRANT Y OF ANY KIND, EXPRESS, IMPLIED OR ST A TUTORY , INCLUDING, BUT NO T LIMITED TO , [...]
-
Página 38
36 airFiber® AF-5/AF-5U Quick Start Guide Compliance F CC Changes or modifications not expressly approved b y the par ty responsible for compliance could v oid the user ’ s authority to operate the equipment. This device complies with P ar t 15 of the FCC Rules. Operation is subject to the following two c onditions: 1. This device may not cause [...]
-
Página 39
37 Compliance RF Exposure W arning The antennas used for this transmitt er must be installed to provide a separation distance of at least 126 cm (AF-5) or 123 cm (AF-5U) from all persons and must not be located or operating in conjunction with any other antenna or transmitter . Les antennes utilisées pour ce tr ansmetteur doivent être installé e[...]
-
Página 40
38 airFiber® AF-5/AF-5U Quick Start Guide Deutsch Die Europäische Richtlinie 2002/96/EC verlangt, dass technische Ausrüstung , die direkt am G erät und/oder an der V erpackung mit diesem Symbol versehen ist, nicht zusammen mit unsortiertem Gemeindeabfall entsorgt werden darf. Das Symbol w eist darauf hin, dass das Produkt von regulärem Haushal[...]
-
Página 41
39 Declaration of Conformity Italiano La direttiva europea 2002/96/EC richiede che le apparecchiatur e contrassegnate con questo simbolo sul pr odotto e/o sull’imballaggio non siano smaltite insieme ai rifiuti urbani non differenziati. Il simbolo indica che questo prodotto non deve esser e smaltito insieme ai normali rifiuti domestici. È respons[...]
-
Página 42
40 airFiber® AF-5/AF-5U Quick Start Guide JL091514 Ελληνική [Greek] ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ UBIQUITI NE T WORKS ΔΗΛΩΝΕΙ ΟΤΙ UBIQUITI NET WORKS device, ΣΥΜΜΟΡΦΩΝΕΤ ΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ Λ ΟΙΠΕΣ ΣΧΕ ΤΙΚΕΣ ΔΙΑ Τ ΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1995[...]
-
Página 43
[...]
-
Página 44
© 2013-2014 Ubiquiti Networks, Inc. All rights reserved . Ubiquiti, UbiquitiNetworks, the Ubiquiti U logo, the Ubiquiti beam logo , airFiber , and TOUGHCable are trademarks or registered trademarks of UbiquitiNetworks , Inc. in the United States and inother countries. All other trademarks are the property of their respective owners. Su[...]