Uniden EXAI3248 manual

EXAI3248_UP004BH UP01004BA_0.Qx 3/14/3 1:33 PM Page 1[...]

EXAI3248_UP004BH UP01004BA_0.Qx 3/14/3 1:33 PM Page 2[...]

When the handset battery pack is fully charged, after 15-20 hours of charging, plug the telephone cord into the base unit and then into a telephone wall jack. Your phone is set for tone dialing. If your local network requires pulse dialing, please see “Choosing the dialing mode” on page 15. A C B Remove the cover. TO SET CALLER ID, LANGUAGE AND[...]

[ 2 ] www.uniden.com Contents Quick Reference Guide 1 Welcome/Features 3 Controls and Functions 4 Getting Started Setting up the Phone 6 Mounting the Base Unit on a Wall 11 Setting Menu Options 13 Basics Making and Receiving Calls 16 Adjusting the Handset Ringer and Earpiece Volume 17 Redial 18 Tone Dialing Switch-over 18 Traveling Out-of-Range 18 [...]

[ 3 ] www.uniden.com W elcome Congratulations on your purchase of the Uniden EXAI3248 series cordless telephone and answering system. This phone is designed and engineered to exacting standards for reliability, long life, and outstanding performance. Note: Some illustrations in this manual may differ from the actual unit for explanation purpose. Th[...]

[ 4 ] www.uniden.com Controls and Functions 2 3 4 1 5 7 6 8 9 11 20 16 15 14 13 10 12 19 18 17 1. Handset antenna 2. Beltclip hole 3. Optional headset jack 4. Handset battery compartment 5. Handset earpiece 6. LCD display 7. (Caller ID) cid/menu key 8. Talk/flash key 9. * /tone/ (left cursor) key 10. Redial/p (pause) key 11. Select key 12. Handset [...]

[ 5 ] www.uniden.com find hs answer on/off delete charge/in use Digital Answerer clock/menu mic set select/volume memo rec greeting ringer 21 22 25 26 28 24 23 27 29 30 31 32 35 33 34 36 38 39 40 37 21. Telephone line jack 22. DC IN 9V jack 23. Handset retainer clip 24. Charge/in use LED 25. (Play/stop) key 26. (Repeat/rewind) key 27. Answer on/off[...]

GETTING STARTED [ 6 ] www.uniden.com Setting up the Phone Do the following steps: A. Choose the best location C. Connect the base unit B. Install the rechargeable battery pack into the handset A. Choose the best location Before choosing a location for your new phone, read the INSTALLATION CONSIDERATIONS included in the PRECAUTIONS AND IMPORTANT SAF[...]

GETTING STARTED [ 7 ] www.uniden.com GETTING STARTED B. Install the rechargeable battery pack into the handset The handset is powered by a rechargeable battery pack. The battery recharges automatically when the handset is placed in the base unit. Charge the handset battery pack for at least 15-20 hours before using your new cordless telephone for t[...]

GETTING STARTED [ 8 ] www.uniden.com 4) Place the battery case cover back on the handset by sliding it upwards until it clicks into place. 5) Place the handset in the base unit for 15-20 hours without interruption. The base unit’s LED light (labeled charge/in use ) illuminates once the handset is placed in the base. The LED light will illuminate [...]

GETTING STARTED [ 9 ] www.uniden.com GETTING STARTED Battery use time (per charge) From fully charged (15-20 hours charge time) • Up to seven hours continuous use during talk mode. • Up to fourteen days when the handset is in the standby mode. Low battery alert When the battery pack is very low and needs to be charged, the phone is programmed t[...]

GETTING STARTED [ 10 ] www.uniden.com C. Connect the base unit 1) Connect the AC adapter to the DC IN 9V jack and to a standard 120V AC wall outlet. 2) Set the base on a desk or tabletop, and place the handset on the base unit as shown. (For wall mounting, see "Mounting the Base Unit on a Wall", on page 11.) 3) Raise the antenna to a vert[...]

GETTING STARTED [ 1 1 ] www.uniden.com GETTING STARTED 5) Once the handset battery pack is fully charged, connect the telephone line cord to the TEL LINE jack and a telephone outlet once the handset is fully charged. If your telephone outlet isn't modular, contact your telephone company for assistance. Modular Mounting the Base Unit on a W all[...]

GETTING STARTED [ 12 ] www.uniden.com 6) Plug the telephone line cord into the telephone outlet. 7) Raise the antenna to a vertical position. 8) Align the mounting slots on the base with the mounting posts on the wall. Then push in and down until the phone is firmly seated. Direct wall mounting If you don't have a standard wall plate, you can [...]

GETTING STARTED [ 1 3 ] www.uniden.com GETTING STARTED Setting Menu Options There are five setup options available. They are Caller ID options [AutoTalk, CIDCW (Caller ID on Call Waiting), Area Code], Dial Mode and Language. AutoTalk allows you to answer the phone without pressing the talk/flash key. If the phone rings when AutoTalk is On, simply r[...]

GETTING STARTED [ 14 ] www.uniden.com To enter your Area Code: If you enter a 3-digit area code number in the Area Code option, your local area code does not appear in Caller ID messages. Do not program this option, if your calling area requires 10-digit dialing. When reviewing Caller ID messages, you will see only the local seven digit number. For[...]

GETTING STARTED [ 1 5 ] www.uniden.com GETTING STARTED Choosing the dialing mode Most phone systems use tone dialing which sends DTMF tones through the phone lines. However, some phone systems still use pulse dialing such as in rural areas. The default setting is tone dialing. Depending on your dialing system, set the mode as follows: 1) When the p[...]

BASICS [ 16 ] www.uniden.com Refer to page 13 "Setting Menu Options" to turn on the AutoTalk feature if desired. Making and Receiving Calls Pick up the handset (AutoTalk:On) or pick up the handset and press the talk/flash key (AutoTalk:Off). 1) Pick up the handset. 2) Press the talk/flash key. 3) Listen for the dial tone. 4) Dial the numb[...]

BASICS [ 1 7 ] www.uniden.com BASICS Adjusting the Handset Ringer and Earpiece V olume Handset ringer tone and volume Press the volume up key or volume down key (labeled as, vol/ring/ or vol/ring/ keys) in standby mode to select one of five ringer tones and volume combinations. Earpiece volume Pressing the volume up key or volume down key (labeled [...]

BASICS [ 18 ] www.uniden.com Redial The the redial/p key redials the last number dialed. The redialed number can be up to 32 digits long. T one Dialing Switch-over Some telephone companies use equipment that requires pulse dialing (sometimes referred to as rotary dialing). If you need to enter tone dialing digits, you can switch-over to tone dialin[...]

Selecting a Different Channel If you encounter interference while using your phone, you can manually change the phone´s channel for clear operation. This function works only when the phone is in use. Press the delete/ch key. “ Scanning ” appears on the display, indicating the phone is changing to another channel. For more information on interf[...]

MEMORY DIALING [ 20 ] www.uniden.com Storing Phone Numbers and Names Memory Dialing allows you to dial a number using just a few key presses. Your cordless phone stores up to 20 names/numbers in the handset. 1) Press the mem key, “ Select Memory ” is displayed. 2) Press the vol/ring/ or vol/ring/ key, or enter a number ( 01 - 20 ) to select the[...]

MEMORY DIALING [ 2 1 ] www.uniden.com MEMORY DIALING 6) Press the mem or select key. “ Store Number ” is displayed. The cursor flashes indicating that the display is ready for the number to be entered. 7) Use the number keys to enter the phone number. The phone number cannot exceed 20 digits. Use the redial/p key to enter a pause in the dialing[...]

MEMORY DIALING [ 22 ] www.uniden.com Steps for Entering Names and Special Characters Refer to the letters on the number keys to select the desired characters. With each press of a numeric key, the displayed character appears in the following order: Upper case letters first, lower case letters next and finally the number corresponding to the key. If[...]

MEMORY DIALING [ 2 3 ] www.uniden.com MEMORY DIALING Making Calls with Memory Dialing Memory dialing from Standb y Mode 1) Press the mem key. The handset displays your programmed memory locations. 2) Press the vol/ring/ or vol/ring/ key, or enter a number ( 01 - 20 ) to select the memory location you would like to dial. 3) Press the talk/flash key.[...]

MEMORY DIALING [ 24 ] www.uniden.com Memory dialing from Talk Mode 1) Press the talk/flash key. “ Talk ” and the volume setting appears. 2) Press the mem key. 3) Press the vol/ring/ or vol/ring/ key, or enter a number ( 01 - 20 ) to select the memory location of the desired phone number. If you press the select key, the number is dialed. 4) To [...]

MEMORY DIALING [ 2 5 ] www.uniden.com MEMORY DIALING Editing a Stored Name and/or Phone Number 1) Press the mem key, “ Select Memory ” is displayed. 2) Press the vol/ring/ or vol/ring/ key, or enter a number ( 01 - 20 ) to select the memory location you would like to edit, and press the mem or select key. 3) Press the mem or select key. The fol[...]

MEMORY DIALING [ 26 ] www.uniden.com 7) Use the number key, * /tone / , #/ , redial/p or delete/ch key to edit the phone number. The phone number cannot exceed 20 digits. (See page 21.) If you don ’ t want to change the phone number, skip this step. 8) Press the mem or select key. If you changed either name or phone number, a confirmation display[...]

MEMORY DIALING [ 2 7 ] www.uniden.com MEMORY DIALING Erasing a Stored Name and Phone Number 1) Press the mem key, “ Select Memory ” is displayed. 2) Press the vol/ring/ or vol/ring/ key, or enter a number ( 01 - 20 ) to select the memory location you would like to erase. 3) Press the mem or select key . 4) Press the mem or select key. The follo[...]

ROCKETDIAL [ 28 ] www.uniden.com RocketDial You can store your most frequently dialed number in the RocketDial. The RocketDial allows you to dial a number with one key press. (There is no need to press the talk/flash key. The phone will automatically dial the number stored.) Storing and Editing the RocketDial 1) When the phone is in the standby mod[...]

ROCKETDIAL [ 2 9 ] www.uniden.com ROCKETDIAL Deleting the RocketDial 1) When the phone is in the standby mode, press and hold the RocketDial key. The following display appears. 2) Press the vol/ring/ or vol/ring/ key to select “ Delete Number ” . 3) Press the select key. The following display appears. 4) Press the vol/ring/ key to move the poin[...]

CALLER ID FEATURES [ 30 ] www.uniden.com Caller ID You must subscribe to Caller ID service to use this feature. When the telephone rings, the Caller ID feature allows you to view the caller ’ s name and phone number on the display before you answer the phone. The handset displays the phone number of the incoming call, the name, and time. Addition[...]

CALLER ID FEATURES [ 3 1 ] www.uniden.com CALLER ID FEATURES 2) When you pick up the phone, the display changes to “ Talk ” . Data errors appear as “ 2 ” . V iewing the Caller ID Message List The Caller ID list stores information for up to 30 incoming calls - even unanswered calls. 1) Press the cid / menu key. The summary screen appears. Th[...]

CALLER ID FEATURES [ 32 ] www.uniden.com Deleting Information from the Caller ID List The cordless phone stores up to 30 messages. If the phone receives the 31st message, the oldest one in the list is automatically deleted. Caller ID data can also be deleted manually. Deleting a Caller ID message 1) Press the cid/menu key. Display the message to be[...]

CALLER ID FEATURES [ 3 3 ] www.uniden.com CALLER ID FEATURES 3) Press the vol/ring/ or vol/ring/ key to select “ Yes ” or “ No ” . 4)Press the select or delete/ch key. When the pointer is at “ Yes ” : You hear a confirmation tone and all stored Caller ID messages are deleted. When the pointer is at “ No ” : The display returns to th[...]

CALLER ID FEATURES [ 34 ] www.uniden.com Storing Caller ID messages in Memory dialing Messages shown in the Caller ID list can be stored in memory dialing. Using the incoming call information (i.e., Caller ID list), the phone number of the party on the Caller ID list can be stored in memory. 1) Press the cid/menu key. Select the phone number to be [...]

THE INTEGRATED ANSWERING DEVICE [ 3 5 ] www.uniden.com THE INTEGRATED ANSWERING DEVICE Digital Tapeless Recording allows you to quickly review, save, or delete the messages you choose. You will never have to worry about a tape wearing out, jamming, or resetting improperly. The Integrated Answering System is easy and convenient to use, but please re[...]

THE INTEGRATED ANSWERING DEVICE [ 36 ] www.uniden.com T urning the Answering System On/Off 1) To turn the answering system on, press the answer on/off key. “ Answering system is on ” and the current greeting message will be played and you will hear a confirmation tone. The message counter displays the number of messages stored in memory. If the[...]

THE INTEGRATED ANSWERING DEVICE [ 3 7 ] www.uniden.com THE INTEGRATED ANSWERING DEVICE Setting up Y our Answering System Using the Menu Mode The Menu mode allows you to set the following Answering System functions. • To scroll through the menu options, repeatedly press the clock/menu key. The system returns to standby after the last menu option. [...]

THE INTEGRATED ANSWERING DEVICE [ 38 ] www.uniden.com Setting the Time The clock on the cordless phone ’ s answering system starts when power is supplied to the base. Follow these steps to set the clock to the correct time. 1) Press the clock/menu key. The system announces “ Time ” , the current time and the guidance for setting the time. 2) [...]

THE INTEGRATED ANSWERING DEVICE [ 3 9 ] www.uniden.com THE INTEGRATED ANSWERING DEVICE 7) Press the set key to select the minute. 8) Press the select/volume or key until you hear the correct AM or PM setting. The message counter displays [ ] or [ ]. 9) Press the set key to select the AM/PM setting. You hear a confirmation tone, then the announcemen[...]

THE INTEGRATED ANSWERING DEVICE [ 40 ] www.uniden.com Setting the Ring Time The ring time setting allows you to set the number of rings the caller hears before your answering system plays the outgoing message. You can set the ring time to answer after two, four, or six rings. Setting (Toll Saver), the answering system picks up after two rings if yo[...]

THE INTEGRATED ANSWERING DEVICE [ 4 1 ] www.uniden.com THE INTEGRATED ANSWERING DEVICE Selecting the message Record Time You have three record time options. The options " 1 minute" or " 4 minutes" set the duration for recording the incoming messages. " Announce only " answers the call with the preset greeting or your p[...]

THE INTEGRATED ANSWERING DEVICE [ 42 ] www.uniden.com Setting the Message Alert tone Message Alert feature lets you know you have new messages by sounding a short beeping tone. If you set the Message Alert to On and when a new message is received, the alert tone will sound every 15 seconds. 1) Press the clock/menu key five times in standby mode. Yo[...]

THE INTEGRATED ANSWERING DEVICE [ 4 3 ] www.uniden.com THE INTEGRATED ANSWERING DEVICE Selecting the Language The answering system voice announcements can be heard in English or French. To choose the language of the answering system voice announcements: 1) Press the clock/menu key six times in standby mode. You hear the announcement “ Language, E[...]

THE INTEGRATED ANSWERING DEVICE [ 44 ] www.uniden.com ▼ Choosing between the two outgoing messages Press the greeting key. Then press the greeting key again when the outgoing message is played. This switches between the prerecorded greeting and the personal greeting. After finishing playing back the message, a confirmation tone is heard. Setting [...]

THE INTEGRATED ANSWERING DEVICE [ 4 5 ] www.uniden.com THE INTEGRATED ANSWERING DEVICE Using Y our Answering System The message counter displays the number of messages stored in memory. If the display flashes, then there are new messages waiting for you. The flashing number represents the number of new messages, not total messages. The cordless pho[...]

THE INTEGRATED ANSWERING DEVICE [ 46 ] www.uniden.com Repeating a message 1) Press the play/stop key to review your messages. The number of stored messages are announced. 2) After a message has played for a few seconds, press the repeat/rew key to replay the message. If you have several messages, press the repeat/rew key repeatedly until you return[...]

THE INTEGRATED ANSWERING DEVICE [ 4 7 ] www.uniden.com THE INTEGRATED ANSWERING DEVICE Deleting a message To maintain maximum record time, delete the old messages. 1) Press the play/stop key to review your messages. 2) Press the delete key anytime during the message to delete. 3) You hear a confirmation tone and the message is deleted. You can also[...]

THE INTEGRATED ANSWERING DEVICE [ 48 ] www.uniden.com Voice memo The voice memo function allows you to record messages (up to 4 minutes). 1) Press and hold the memo rec key. You hear an announcement “ Record memo message ” and a tone. [ ] flashes on the message counter. 2) Start your recording. 3) When you have finished, press the play/stop , m[...]

THE INTEGRATED ANSWERING DEVICE [ 4 9 ] www.uniden.com THE INTEGRATED ANSWERING DEVICE Remote access away from home You can operate your answering system from a remote location using any touch-tone telephone. Use this function to check for recorded messages, to play or delete messages, even to record a new greeting message. 1) Call your telephone n[...]

THE INTEGRATED ANSWERING DEVICE [ 50 ] www.uniden.com * For Memo Record and Greeting Message Record function, the first time you enter the corresponding command, it starts the Recording function. If you want to stop the recording, enter the command again. 5) After all of the Help Guidance prompts have played, you hear intermittent beeps indicating [...]

ADDITIONAL INFORMATION [ 5 1 ] www.uniden.com ADDITIONAL INFORMATION Changing the Digital Security Code The digital security code is an identification code used to connect the handset and the base unit. Normally, setting the code is not necessary. The first time you charge your handset, the security code is automatically set. In the rare situation [...]

ADDITIONAL INFORMATION [ 52 ] www.uniden.com Note on Power Sources Battery replacement and handling When the operating time becomes short, even after a battery is recharged, please replace the battery. With normal usage, your battery should last about one year. Please contact your place of purchase or the Uniden Parts Department for a replacement b[...]

ADDITIONAL INFORMATION [ 5 3 ] www.uniden.com ADDITIONAL INFORMATION T roubleshooting If your phone is not performing to your expectations, please try these simple steps first. Symptom The charge/in use LED won't illuminate when the handset is placed in the base. The audio sounds weak and/or scratchy. Can't make or receive calls. The hand[...]

ADDITIONAL INFORMATION [ 54 ] www.uniden.com Symptom Severe noise interference. The Caller ID does not display. The answering system does not work. The answering system does not answer calls. Messages are incomplete. After a power failure, the outgoing message is deleted. Suggestion • Keep the handset away from microwave ovens, computers, remote [...]

ADDITIONAL INFORMATION [ 5 5 ] www.uniden.com ADDITIONAL INFORMATION Symptom No sound on the base unit speaker during call monitoring or message playback. Cannot access remote call-in features from another touch-tone phone. If you still have a problem. Suggestion • Adjust the speaker volume on the base unit. • Make sure you're using the co[...]

ADDITIONAL INFORMATION [ 56 ] www.uniden.com Case If the handset or base is exposed to moisture or liquid, but only affects the exterior plastic housing. If moisture or liquid has entered the plastic housing (i.e., liquid can be heard in the phone or liquid has entered the handset battery compartment or vent openings on the base). Action Wipe off t[...]

ADDITIONAL INFORMATION [ 5 7 ] www.uniden.com ADDITIONAL INFORMATION General Information The phone complies with FCC Parts 15 and 68. Operating temperature: 0 ° to 50 ° C (+32 ° F to +122 ° F) AC Adapter Information AC Adapter part number: AD-314 Input Voltage: 120V AC 60Hz Output Voltage: 9V AC 350 mA Battery Information Battery part number: B[...]

ADDITIONAL INFORMATION [ 58 ] www.uniden.com Precautions! Before you read anything else, please observe the following: Warning! Uniden America Corporation DOES NOT represent this unit to be waterproof. To reduce the risk of fire, electrical shock, or damage to the unit, DO NOT expose this unit to rain or moisture. Rechargeable Nickel-Cadmium Batter[...]

ADDITIONAL INFORMATION [ 5 9 ] www.uniden.com ADDITIONAL INFORMATION Telephone Line Problems The FCC has granted the telephone company the right to disconnect service in the event that your phone causes problems on the telephone line. Also, the telephone company may make changes in facilities and services which may affect the operation of your unit[...]

ADDITIONAL INFORMATION [ 60 ] www.uniden.com I.C. Notice TERMINAL EQUIPMENT NOTICE : This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications. This is confirmed by the registration number. The abbreviation, IC, before the registration number signifies that registration was performed based on a Declaration of C[...]

ADDITIONAL INFORMATION [ 6 1 ] www.uniden.com ADDITIONAL INFORMATION A AC adapter information ................ 57 Announce only feature ................41 Answering system Deleting a message ..................47 Playing a message ....................45 Recording a conversation ..........48 Remote access ........................49 Repeating a messag[...]

[ 62 ] www.uniden.com MEMO EXAI3248_UP004BH UP01004BA_0.Qx 3/14/3 1:35 PM Page 62[...]

Remote Operation Card EXAI3248 series REMO TE OPERA TION CARD C U T Remote access away fr om home 1. Call your phon e number from a touch-tone ph one. 2. During th e outgoing messag e, press 0 and en ter your PIN code . The answering system announces th e number of messages stor ed in memory and the h elp guidance . The phone stan ds by for you to [...]

Remote Operation Card C U T C U T C U T C U T T ask Key Repeat a Messag e 0 1 Playing In coming M essages 0 2 Skipping a M essage 0 3 Deleting a M essage 0 4 Stop Operati on 0 5 Answerin g System On 0 6 Mem o Record/Stop 0 7 Greetin g Messag e Record/Stop 0 8 Answer System Off 0 9 Help Gui dan ce 1 0 T ask Key Repeat a Messag e 0 1 Playing In comin[...]

At Uniden, w e ’ ll take care o f you! If you need any assistance with this product, please call our Customer Hotline at 1-800-297-1023 PLEASE DO NOT RETURN THIS PRODUCT TO THE PLACE OF PURCHASE. Our Uniden representatives will be happy to help you with any matters regarding the operation of this unit, available accessories, or any other related [...]

EXAI3248_UP004BH UP01004BA_0.Qx 3/14/3 1:35 PM Page 66[...]