Vivotek IP3111/IP3121 manual

NetworKam IP3111/IP3121 User's Manual[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 1 Befor e Y ou Use Surveillance devices may be prohibited by law in y our country . Though NetworKam is not only a high performance surveillance system but also a networked video server , ensure that the operation of such devices are legal before installing this unit for surveillance. It is impo[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 2 T able of Contents Befor e Y ou Use........................................................................................ 1 Package Contents ................................................................................... 6 Physical Description.............................................[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 3 Cable connection ............................................................................................................... ......... 24 Power on ....................................................................................................................... .............. 24 Softw[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 4 Customizing homepage images .................................................................................................. 69 V iewing system log ............................................................................................................. ....... 70 Uploading the configura[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 5 Image quality configuration URL............................................................................................... 8 0 Camera configuration URL ....................................................................................................... .8 1 Camera custom command configu[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 6 Package Contents NetworKam IP31 1 1/IP3121 Power adapter Null modem cable I/O terminal block connector[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 7 W rench Installation and document CD Quick installation guide W arranty card[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 8 Physical Description Rear Panel Ethernet 10/100 socket Connect to Ethernet network with a UTP categor y 5 cable that cannot exceed 100 meters. Once the Ethernet cable is connected without error , NetworKam will utilize Ethernet interface regardless of modem connection. COM port This RS232 seri[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 9 General I/O terminal block 1 Å D I + I N P U T ( M a x . 5 0 m A , 1 2 V D C ) 2 Å D I - I N P U T 3 Å SW _COMMON OUTPUT (short with NC at initial state) 4 Å SW _NOPEN OUTPUT (Max. 1A, 24VDC or 0.5A, 125V AC) 5 Å RS485 B (inverting) 6 Å RS485 A (non-inverting) NetworKam provides a very f[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 10 S tatus LEDs Each time NetworKam starts, it will perform a Power - On Self T est, abbreviated as POST hereafter , to examine every hardware module. As soon as the admi nistrator plugs in the power adapter , both LEDs under the network LED will flash one by one until the POST is done. If any m[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 11 Restor e button There is a button hidden in the box for restoring the sy stem factory default settings. When the system fails to install or operates abnormally , use the included assi stant stick in the package and follow the following procedures to reset the system back to its original statu[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 12 How to Install T o easily fit into various environments, NetworKam automatically detects the attached interfaces and configures itself to the best condition. Therefore user s need not care how to select the netwo rk between Ethernet and modem, and whether the Ethernet sp eed is 10Mbps or 100 [...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 13 Ethernet Envir onment Hardware installation Before installing multiple NetworKams at the well- chosen locations, the administrator shoul d memorize the serial numbers on the packages respectively for future use. Cable connection Shut down all the peripheral devices prior to connec tion. Conne[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 14 Power on Make sure all cables are correctly and firmly connect ed before turning on NetworKam. T urn on cameras, sensors, alarm devices, and then attach the power ad aptor of NetworKam to the electric power socket*. After the POST (power -on self test) is complete and the result is successful[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 15 Software configuration Easy way w ith installer pr ogram In order to configure NetworKams remotely , admini strators should keep the serial numbers of the new NetworKams for identification and initial passwords . After successfully mounting NetworKams in the proper position, run the Installer[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 16 The IP address shown in "Current IP Address" fiel d is for the administrator's reference. If the administrator wants to use another IP address, modify the IP text field below the list window . If the administrator wants to fix the IP address of the unit, check the option "[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 17 When IP and options are O.K., click on . A message window will pop open to inform if the IP address is valid. If the IP is not taken by another network device in the network, the Installer p rogram will continue with the setup. Otherwise another message window will warn that t he assigned IP [...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 18 After successful notification, administrators may keep the address inform ation for user ’ s request. After clicking on , the "Assigned" field will be labeled "Y es". Administrators may click directly on to access the newly installed server in the default browser .[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 19 While checking “Use this IP whenever sy stem boot s”, a dialog window may pop out to ask for “Server FTP Port” and “Root Password” because they are alr eady changed to other than default settings. If the settings are lost, restore default settings and use installer to install agai[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 20 Manual way w ith existing programs For those environments such as MAC, Linux, Unix or other operating systems, whose installer is not yet available, some common network tools including AR P and PING can be used to install NetworKam. Make sure ARP and PING program s exist in y our operating sy[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 21 First access to NetworKam When connecting to NetworKam for the first time, adm inistrat ors should check security and network settings on the configuration page. For complete protection from illegal usage, NetworKam provides two privileges and always needs user name and password be fore acces[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 22 the previous settings. If the install option stays checked, NetworKam will perform the installation procedure every time the system boots up. Details about configurations are descr ibed in the "How to Use" section. Related figures are attached for easy reference.[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 23 Modem Envir onment Hardware installation Before installing NetworKam, the administrator s hould memorize the serial numbers on the packages respectively for the initial passwords. T o use a dial-up network, the Ethernet socket shoul d be left disconnected since Ethernet is the first priority [...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 24 Cable connection Shut down the peripheral devices prior to connecti on. Connect the supplied cables from NetworKam to the related devices according to following steps. Note that power adaptor m ust be kept unplugged until other cables are firmly connected. For the first access to NetworKam wi[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 25 Software configuration For the first time, users should connect the in cluded null modem cable between the COM port of NetworKam and any COM port of the PC for initial setup. Install a new modem Open the control panel and double click the modems icon.[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 26 Check "Don't detect my modem ......" item and click on to install a new modem. From (S tandard Modem T y pe) choose th e Standard 33600 bps Modem and click on .[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 27 Choose the serial port that the included null modem cable is attached to and click on . The null modem is now ready for use. If no Dial-Up adapter exists in the system, W indows will automatically prompt to install. Press to continue.[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 28 Setup a new connection After the 33600 bps m odem is installed, open the dialup network folder i n Win dows to build a new connection. Select the device as the newly installe d standard 33600 bps modem and click on .[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 29 Just enter arbitrary digits as phone number and click on . The phone number used here is not important. After clicking on , this new connection will display in th e Dial-up Networking folder and will be used for null modem connections.[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 30 Right-click on the newly setup connection icon for properties. In the first General page, clear "Us e area code and Dialing Prope rties" option and click on .[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 31 Select 1 15200 as the speed and click on . On the second page, only check "Enable software c ompression" and "T CP/IP" while leaving others blank. Keep other settings as default values and click on . Now the connection is ready for null modem connection.[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 32 Double click the newly setup connec tion. A dialing information window will pop up. Enter “root” as user name and the serial number labeled on the bottom side of the box as the password and click on . The user name and password are identical to what is used in web access and may be change[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 33 First access to NetworKam Through direct connection by null modem cable admi nistrators can open the default web browser and type in 200.1.1.1 as the address and press enter . Note that 200.1.1.1 will be th e default IP address in a dial-in connection and 200.1.1.100 will be the given IP addr[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 34 basic configurations. If people other than the admi nistrator will be allowed to use NetworKam, the administrator should add these user profiles in the Security option. When NetworKam accepts dial-in connection and acts as a server , the user name and password used in dialing are the sa me as[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 35 How to Use NetworKam is a well-designed stand-alone network ca mera. W ith the built-in web server , authorized users may use web browser Internet Explorer to watch the video and hear the audio captured by NetworKam. The powerful video compression processes up to 30 frames per second and m ak[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 36 Authentication After opening the W eb browser and typing in the UR L of NetworKam, a dialo gue window will pop up to request a username and password. Fo r administrator’ s initial usage of Ne tworKam, enter the username as “root” and the password as the serial number in capital letters.[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 37 If it is initial access to NetworKam in W indows, the web browser will ask to install a new plug-in that is provided by NetworKam. This plug-in has been regi stered for certificate and is used to display the motioned pictures in the browser . Users may click on to install the plug-in. If the [...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 38 Primary user ’ s capability Main scr een with camera view There is a logo image shown in the upper left corner . It can link to ot her web sites or resources depending on the settings in configuration. The assigned caption and system date/time will display in the banner above the image wind[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 39 Pan/T ilt positioning device control An external PT positioning device may connect to bear the NetworKam with motion capability . If the camera control option has been enabled, there are b utt ons under the im age. It allows users to control the PT positioning device attached to NetworKam wit[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 40 Client Setting If it is the first access to “ Client Setting ” page in W indows, the web browser will ask to install a new plug-in that is provided by NetworKam. This plug-in has been registered for cer tificate and is used to setting the client parameters in the browser . Users may click[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 41 real-time issue is worse than UDP protocol. If y our environment is behind the firewall and it opens HTTP port (80) only , you can select HTTP protocol only . In this mode, audio will not be sent and you just can see the video only . If you don’t know which protocol you should choose, selec[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 42 System configuration There are two methods provided for configuration. W e b interface is quite easy and clear to use and FTP with script file is rapid for mass installation. Syst em configuration can be acce ssed only by administrators. Administrators may type the URL below the figure to dir[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 43 System parameters T o change the system name, type in the text box after " Host Name ". This name will be disp layed at the top of the main page. In the case that only the host na me is changed, without adjusting date and tim e of NetworKam, click on " Keep curr ent date and ti[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 44 User group administration T o change the administrator ’ s password, type the ne w password in both text boxes identically . What is typed will be displayed as asterisks for security purposes. After pressing , the web browser will ask administrators for the new password for access. T o add [...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 45 Network settings Any change made to this page will make the system r estart to validate. Make sure every field is correctly typed before clicking on . T o eliminate incautious mistakes during installation, NetworKam will stay in installation mode whenever it starts unless " Reset network[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 46 subnet mask may differ from the default valu e 255.255.255.0 and service pr oviders may assign some specific network settings. Administrators should change the configuration according to what is given by the service provider . The configuration may include " IP address ", " Sub[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 47 the client side will receive the poor quality of medi a. For improving this situation, you can check the “ Improve audio quality i n low bandwidth environment ” item. It can make the audio quality better , but the media delay is longer and real-time issue is ba d. If the network performan[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 48 V ideo codec parameters Options on this page will affect the im age on the main page seen by users. " T ext on Vi deo " will be displayed above the video window with a tim estamp. The timestamp is captured from date and tim e of NetworKam that is maintained by a built-in real-time c[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 49 IP31 1 1 /IP3121 uses MPEG4 codec compression for best streaming solution. The compressed video data is far less than JPEG in normal cases but it still de pends on the level of diff erence between every two sequential images. There are three dependent parameters provided for adjustment. "[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 50 T o adjust image settings for best visual quality , press and a motion picture window will pop up for your reference. There are four fields including " Brightness ", " Contrast ", " Hue " and " Saturation " for video compensation. . Each field has elev [...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 51 Motion detection Please note that the option " Enable Motion Detection " on the video page must be enabled to make detection effective. NetworKam allows administrators to define at most three detectio n windows to cover different areas. T o monitor a specific area, click to add a ne[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 52 The following figure sh ows the screen when is clicked. The monitoring windows will be marked by red squares.[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 53 Camera positioning device configuration Since NetworKam can be used in either PPP netw or k or Ethernet network, the single serial port can control either external serial port devices like camera positioning devices or a data modem. While in PPP interface, go to Modem page for modem configura[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 54 as five hexadecimal bytes of 01, 20, 00, AB and CD . If the command string is composed of two or more commands, a comma ‘,’ should be inserted to sep arate each command. Each comma represents 200 milliseconds. For instance, a command to pan left may be “01000305” and a command to stop[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 55 Modem and dialup settings In PPP interface, a modem option will work instead of camera control. Conf igurations include m ode m initialization and outside dial-up server . If the users will setup with external sensors and alarms for property security , dial-out is needed to send some snapshot[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 56 minutes " will force NetworKam to drop the connection when there is no activity on the connection for the specific period. The range of this period is from 1 to 240 minutes, with 0 indicating a continuous connection. Administrators may let NetworKam keep the connection for a while to all[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 57 Application Administrators can use combinations of options on the application page to perform many useful security applications. The sending method is selected at the bottom of the page. Both e-ma il and FTP use the network settings on the network page. T o use FTP to upload snapshots, a time[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 58 The other " Event operation " can be used to combine m o tion detec tion with devices attached to digital input, to drive devices attached to digital output, or send out snapshots for evidence. It helps users establish an easy security system. Administrators ma y choose any combinat[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 59 Homepage layout settings Administrators may give NetworKam a different presence of homepage. The " logo graph " for the system logo in the upper-left corner can be hidden; or the default image from the system memory can be used; or an external resource can be used by assigning a URL[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 60 One-shot fast configuration via FTP For quick setup of NetworKam, the administrator can utilize the default C ONFIG .INI that may be downloaded from the FTP daemon of NetworKam. T o log into the FTP daemon, enter “root” as the user name and the same password used when connecting to the W [...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 61 0002D1000001 Read only string <software version> IP31x1-VVTK-0100 Read only strin g <current date> 2002/04/08 year/month/date. Read only strin g <current time> 07:00:00 hour/minute/second. Read only strin g <time zone> 0 Fr om 12 to -12 <user name> (0) root Read [...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 62 <user password> (0) 0002D1000001 Initial value is as same as serial number ( 1 ) S tring shorter than 15 character s ( 2 ) The followings ar e as same as above (3) (4) (5) (6) (7) (8) (9) (10) (1 1) (12) (13) (14) (15) (16) (17) (18) (19) (20) [LA YOUT] <font color> 1 color index:[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 63 <logo type> 1 0 for blank, 1 for default image or 2 for loading fr om URL <background type> 1 0 for blank, 1 for default image or 2 for loading fr om URL <logo source> http:// link to external r esource when logo type is 2, no longer than 80 <background source> http://[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 64 <primary name server> 192.168.0.1 S tandar d IP format <secondary name server> 168.95.1.1 S tandar d IP format <ntp enabled> Y E S or NO <network timing server> ntp-cup.external.hp.com S tandard IP format or string shorter than 40 characters <smtp mail serv er> S[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 65 <backup ftp password> S tring shorter than 15 characters <backup ftp init path> S tring shorter than 40 characters <http server port> 8 0 Integer less than 1024 <control channel port> 5001 Integer less than 65535 <control channel port> 5002 Integer less than 6553[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 66 3 0 1, 2, 3, 5, 10, 15, 20, 25, 30 (30 for NTSC only) <video size> 3 1 , 2 , 3 r epr esenting half, halfx2, normal <motion detect enabled> NO <flip> NO <mirror> NO [SERIAL] <auto detect camera> Y E S or NO <data bits> 8 <stop bits> 1 <parity bits&g[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 67 <PT control com mands> UP S tring shorter than 80 characters DOWN S tring shorter than 80 characters LEFT S tring shorter than 80 characters RIGHT S tring shorter than 80 characters HOME S tring shorter than 80 characters [ALER T] <application mode> 0 for none, 1 for sequential mo[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 68 Advanced functions We b V iewing system log Click the button on the configuration page to view th e system log file. The content of the file reveals useful information about configuration and connection after the system boots up. V iewing system parameters Click the button on the configuratio[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 69 FTP NetworKam not only has web service for easy access but also has a built-in FTP service to make system integrators easy to use. According to settings on the application page, Netw orKam can sequentiall y send updated snapshots over a specific period to an external server with choices of ov[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 70 V iewing system log Download SYSTEM.LOG and open it with any text vi ewer . The content of the file reveals useful information about configuration and c onnections after the sy stem boots up. It helps administrators to easily find out who and how NetworKam was accessed since all network acces[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 71 web page in the browser . If power fails during the software upgrade, the program in the mem ory of NetworKam may be destroyed permanently . If NetworKam cannot restart properly , ask the dealer for technical service.[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 72 Te l n e t NetworKam has a T elnet daemon for administrators to access some seldom used functions. Using any general terminal program to connect to NetworKam will prompt the user for a password. Usernam e is not requested here since only administrators can access the T elnet daemon. The passw[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 73 Set digital outputs T o set digital output to connect NO with COMMON, type "DO=L". T o set digital output to connect NC with COMMON, type "DO=H". Erase snapshots stor ed in Flash memory T yping "erase image" will clear all snapshots saved in Flash.memory . Erase [...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 74 URL commands of NetworKam For some customers who already have their own web s ite or web control application, NetworKam can be easily integrated through convenient URLs. Th is section lists the commands in URL format corresponding to the basic functions o f NetworKam. Some RFC standards relat[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 75 Send command to device attached to COM /cgi-bin/senddata.cgi?data=123456, ABCDEF&flush=yes&wait=1000&read=6 This hyperlink will inform NetworKam to send out binary format commands to the COM with “0x12, 0x34, 0x56” followed b y “0xAB, 0xCD, 0xEF”. Each comma separates the [...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 76 Page URL The configuration page has a frame layout includ ing an optio n list frame and an optio n page frame. Referenced URLs, except for the configuration page, direct users to the option page frame only . Some pages, like image quality setting and preset setting, are opened in new windows [...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 77 System r esource URL There are some images used on the hom epage when the homepage layout is in i mage mode. Administrators may use the following links to show the images saved in NetworKam on another page. T o change the images referenced by the URL, refer to the homepage layout section in c[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 78 Security configuration URL URL: /setup/security .cgi NAME V ALUE DESCRIPTION rootpass <text string shorter than 15 characters> change root password username <text string shorter than 15 characters> add new user userpass <text string shorter than 15 characters> new user'[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 79 ftp1 <domain name or IP address> prim ary FTP server ftpuser1 <text string shorter than 15 characters> user name for primary FTP server ftppass1 <text string shorter than 15 characters> password for primary FTP server ftpfolder1 <text string shorter than 40 characters>[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 80 1200000 set bit rate to 1200K bps 1 set maxi mum fr ame ra t e to 1 fp s 2 set maxi mum fr ame ra t e to 2 fp s 3 set maxi mum fr ame ra t e to 3 fp s 5 set maxi mum fr ame ra t e to 5 fp s 10 set maxi mum fr a me rat e to 10 f ps 15 set maxi mum fr a me rat e to 15 f ps 20 set maxi mum fr a [...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 81 Camera configuration URL URL: /setup/camera.cgi NAME V ALUE DESCRIPTION RS232 switch COM to RS232 interface <other than RS232> switch COM to RS485 Y es Enable control PT device camctrl <other than yes> Disable control PT device baud <integer> set baud rate of COM data <in[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 82 com3 <text string shorter than 80 characters> custom command 3 of COM com4 <text string shorter than 80 characters> custom command 4 of COM com5 <text string shorter than 80 characters> custom command 5 of COM Modem configuration URL URL: /setup/modem.cgi NAME V ALUE DESCRIP[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 83 inter <integer> seconds delay to capture post-event dihigh < not required > set DI high as trigger condition dilow < not required > set DI low as trigger condition dirise < not required > set DI rising as trigger condition difall < not required > set DI falling a[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 84 Appendix A. POST procedure After the power has been turned on, NetworKam will perform a self-diagnostic to locate any possible hardware defects. If the power indicator is dim at th e beginning, the power fails to proceed further . While the POST is proceeding, the status LED indicators w ill [...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 85 B. Frequently asked questions Q. What if I for get my password? A. Every access to NetworKam needs au thentication. If you are one of the managed users, you have to ask the administrators for the password. If you are the administrators, there is no way to recover the root password. The only w[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 86 from modem property in the control panel. While in Ethernet, it may be due to tim e taken in storing snapshots into memory upon events occurring. Q. How does NetworKam detect the supported PTZ cameras autom atically? A. If there is no camera detected, NetworKam will monitor t h e CTS of the c[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 87 Q. I have a PTZ camera that is not on the supported list. How can I control it? A. NetworKam provides a custom ca mera command interface to control the cameras that are not supported. The details are described in the manual. Be sure the COM port settings are applied to the camera specificatio[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 88 C. T echnical specifications Remote Management Configuration and system log can be accessed via Web browser and FTP application remotely . Networking Protocol TCP/IP , HTTP , SMTP , FTP , T elnet, NTP , DNS and DHCP Modem PPP(dial-up, direct cable connection) Physical 10baseT Ethernet or 100b[...]

www .vivotek.com T : 886-2-22404099 F: 886-2-22404097 89 Electr o magnetic Compatibility (EMC) USA - This equipment has been tested and found to co mply with th e li mits for a Class B digital d evice, pu rsu ant to Part 15 of the FCC Rules. These limits are designed to provide reasona ble protection against harmful interfere nce in a residential i[...]