Wagner SprayTech B_04234 manual

C obra 40-10 B_04234 High-pressur e Double Diaphragm P umps V ersion 10/2013 T ransla tion of the Original Opera ting Manual[...]

[...]

3 OPERA TING MANU AL VERSION 10/2013 ORDER NUMBER DOC 2303675 T able of C onten ts 1 ABOUT THIS OPERA TING MANU AL 5 1.1 Pr eface 5 1.2 W arnings, Notices, and S ymbols in this Operating Manual 5 1.3 Languages 6 1.4 Abbreviations in the T ext 6 2 C ORRECT USE 7 2.1 Device T ypes 7 2.2 T ype of Use 7 2.3 Use in an Explosion Hazard Ar ea 7 2.4 Safety[...]

4 OPERA TING MANU AL VERSION 10/2013 ORDER NUMBER DOC 2303675 T able of C onten ts 6 ASSEMBL Y AND C OMMISSIONING 25 6.1 Installation and Connection 25 6.1.1 Installing the Pump 25 6.1.2 Grounding 26 6.2 Commissioning 28 6.2.1 Safety Instruc tions 28 6.2.2 Basic Flushing 31 6.2.3 F illing with Working Material 32 7 OPERA TION 33 7.1 Spraying 33 7.2[...]

5 OPERA TING MANU AL VERSION 10/2013 ORDER NUMBER DOC 2303675 1 ABOUT THIS OPERA TING MANU AL 1.1 PREF ACE 1.2 W ARNINGS , NO TICES, AND SY MBOLS IN THIS OPERA TING MANUAL W arning instructions in this operating manual highlight par ticular dangers to users and to the device and state measur es for avoiding the hazar d. These warning instructions f[...]

6 OPERA TING MANU AL VERSION 10/2013 ORDER NUMBER DOC 2303675 1.3 LANGUA GES The operating manual is available in the f ollowing languages: Language Order No . Language Order No . German 2303152 English 2303675 F rench 2303676 Dutch 2303677 Italian 2303678 Spanish 2303679 Danish 2303680 Swedish 2303682 P or tuguese 2343519 1.4 ABBREVIA TIONS IN THE[...]

7 OPERA TING MANU AL VERSION 10/2013 ORDER NUMBER DOC 2303675 2 C ORRECT USE 2.1 DEVICE TYPES Double diaphragm pump and spray pack: 2.2 TYPE OF USE 2.3 USE IN AN EXPL OSION HAZARD AREA The device is suitable f or processing liquid materials like paints and lacquers in acc ordance with the classi cation into explosion classes IIA or IIB . The dou[...]

8 OPERA TING MANU AL VERSION 10/2013 ORDER NUMBER DOC 2303675 Application W ater-dilutable products Solvent-based lacquers and paints T wo-component coating products Emulsions UV lacquers Primers Epoxy and polyurethane lacquers , phenolic lacquers Liquid plastics W ax-based underside protection Shear-sensitive lacquers 2.5.1 REC OMMENDED APPLICA TI[...]

9 OPERA TING MANU AL VERSION 10/2013 ORDER NUMBER DOC 2303675 2.6 REASONABL Y FORESEEABLE MISUSE The follo wing is prohibited: coating work pieces which ar e not grounded, unauthorized con versions and modi cations to the double diaphragm pump , processing dry or similar coating products, and using defective components , spare parts, or accessor[...]

10 OPERA TING MANU AL VERSION 10/2013 ORDER NUMBER DOC 2303675 3.1 EXPL OSION PRO TECTION IDENTIFICA TION As de ned in Directive 94/9/EC (A TEX 95), the device is suitable for use in potentially explosive areas. European C ommunities Symbol for explosion pr otection Device class II Category 2 (Zone 1) Ex-atmosphere gas Explosion group Constructi[...]

11 OPERA TING MANU AL VERSION 10/2013 ORDER NUMBER DOC 2303675 4 GENERAL SAFETY INSTRUCTIONS 4.1 SAFETY INSTRUCTIONS FOR THE OPERA TOR 4.1.1 ELECTRICAL EQUIPMENT 4.1.2 ST AFF QU ALIFICA TIONS 4.1.3 SAFE WORK ENVIRONMENT Keep this operating manual to hand near the device at all times . Always follow local r egulations concerning occupational safety [...]

12 OPERA TING MANU AL VERSION 10/2013 ORDER NUMBER DOC 2303675 4.2.1 SAFE HANDLING OF W A GNER SPRA Y DEVICES The spray jet is under pr essure and can cause dangerous injuries. Av oid injection of paint or cleaning agents: Never point the spray gun at people . Never reach int o the spray jet. Befor e all work on the device, in the ev ent of work in[...]

13 OPERA TING MANU AL VERSION 10/2013 ORDER NUMBER DOC 2303675 Ensure that the hose material is chemically r esistant to the sprayed pr oducts. Ensure that the product hose is suitable for the pr essure generated in the device . Ensure that the f ollowing information can be seen on the high-pressur e hose: – Manufac turer – Permissible operatin[...]

14 OPERA TING MANU AL VERSION 10/2013 ORDER NUMBER DOC 2303675 4.2.6 T OUCHING HO T SURF ACES Only touch hot surfaces if you are wearing pr otective gloves. When operating the device with a coating produc t with a temperature of > 43 °C; 109.4 °F : - Identify the device with a warning label "Warning - hot surface" . Order No . 999[...]

15 OPERA TING MANU AL VERSION 10/2013 ORDER NUMBER DOC 2303675 4.3 USE IN AREAS SUBJECT TO EXPL OSION HAZARDS The pneumatic pump may be used in potentially explosiv e areas. T he following safety regulations must be observed and followed . 4.3.1 SAFETY REGULA TIONS Safe handling of W A GNER spra y devices Mechanical sparks can form if the device co[...]

16 OPERA TING MANU AL VERSION 10/2013 ORDER NUMBER DOC 2303675 4.3.2 OPERA TION WITHOUT FL UID Av oid running the pump so that it sucks in air (without  uid inside). T he air , combined with the vapor of  ammable  uids, can generate internal areas with an explosion hazar d. P eriodically check that the pump is working smoothly, pa ying spe[...]

17 OPERA TING MANU AL VERSION 10/2013 ORDER NUMBER DOC 2303675 5.1 SC OPE OF DELIVER Y Inlet housing Consital (aluminum alloy) Fluid section Consital (aluminum alloy) V alve balls Stainless steel V alve seats/valve cone Carbide Diaphragms Resistant P A V alve  tting 1.4104 Description Devices Pump ratio 40:1 V olume  ow per double str oke (DH[...]

18 OPERA TING MANU AL VERSION 10/2013 ORDER NUMBER DOC 2303675 * A-rated sound pressur e level measured at 1 m distance , LpA1m, in accordance with DINEN 14462: 2005. Referenc e measurements have been made b y SUV A (Swiss A ccident Insurance Institute). Description Devices Air inlet (inside thread) inch G 1/2 Minimum Ø of the compressed air su[...]

19 B_02943 G P Q N O R F B D E F H I K L M G A C B_04235 Cobr a 40-10 OPERA TING MANU AL VERSION 10/2013 ORDER NUMBER DOC 2303675 5.2.3 MEASUREMENTS AND CONNECTIONS Measurement mm; inch A 505; 19.88 B 313; 12.32 C 322; 12.68 D 134; 5.28 E 55; 2.16 F 182; 7.16 G 80; 3.15 HM 6 I 25; 0.98 K G1/4" L M36x2 M NPSM1/4-18 N 149; 5.87 O 91; 3.58 P 107;[...]

20 BAR BAR BAR BAR BAR BAR "? OPERA TING MANU AL VERSION 10/2013 ORDER NUMBER DOC 2303675 5.2.4 VOL UME FL OW 5.2.5 PERFORMANCE DIA GRAMS Stroke frequency (DH/min) Pr oduct pressure (bar) Air consumption (nl/min) W ater  o w rate (nl/min) W agner AL nozzles V olume  ow in l/min.* inch mm[...]

21 NL / mi n L / mi n B_01203 C nl/min <scfm> bar (MPa) <psi> 250 (25) <3625> 200 (20) <2900> 150 (15) <2175> 100 (10) <1450> 50 (5) <725> 0 0 0.4 <0.1> 0.8 <0.2> 1.2 <0.3> 1.6 <0.4> 2 <0.5> 2.4 <0.6> l/min <gpm> 0 1000 <35> 800 <28> 600 <21> 400 &[...]

22 1 4 6 9 3 5 2 7 13 14 10 11 12 15 8 B_04237 Cobr a 40-10 OPERA TING MANU AL VERSION 10/2013 ORDER NUMBER DOC 2303675 General information The double diaphragm pump is driven with c ompressed air . T his compressed air mov es the air piston in the air motor (4), and consequently the piston r od in the pressure stage (9), up and down. A t the end o[...]

23 B_01205 "? B_01207 OPERA TING MANU AL VERSION 10/2013 ORDER NUMBER DOC 2303675 Positioning The Cobra pump may only be operat ed in a horizontal or vertical position as shown in the diagrams. Overhead operation is not permitted. V er tical positioning Horizontal positioning Overhead positioning Overpressure! Risk of injur y fr[...]

24 OPERA TING MANU AL VERSION 10/2013 ORDER NUMBER DOC 2303675 5.3.2 PRESSURE REGULA T OR UNIT FOR C OBRA B_04301 2 3 1 B_04300 2 3 1 4 5 Positions of the ball v alve 1 Open : working position 2 Closed: The air motor can still be under pr essure. 3 Ve n t : Operating pressure in the air motor is vented (control pr essure is still present). 1 Pr ess[...]

25 B_04239 1 6 7 2 4 5 OPERA TING MANU AL VERSION 10/2013 ORDER NUMBER DOC 2303675 6 ASSEMBL Y AND C OMMISSIONING 6.1 INST ALLA TION AND C ONNECTION 6.1.1 INST ALLING THE PUMP Proc edure: 1 Mount the pump on a base frame, trolley (6), or wall mount. 2 For AirC oat systems: Mount the additional  lter pr essure regulator (7) (optional). 3 Mount su[...]

26 "? 2MAX- 7 OPERA TING MANU AL VERSION 10/2013 ORDER NUMBER DOC 2303675 6.1.2 GROUNDING Grounding scheme (example) Pump P aint tank W ork piece Conv eyor Spraying stand Floor static dissipativ e Discharge of electrostatically charged c omponents in atmospheres containing solv ents! Explosion hazard from elect[...]

27 "? OPERA TING MANU AL VERSION 10/2013 ORDER NUMBER DOC 2303675 Cable cross sections Pump 4 mm; A WG11 P aint tank 6 mm; A WG10 Conv eyor 16 mm; A WG5 Booth 16 mm; A WG5 Spraying stand 16 mm; A WG5 Proc edure: 1 Screw on grounding cable with ey e. 2 Clamp the grounding cable clip to a g rounding connection on si[...]

28 OPERA TING MANU AL VERSION 10/2013 ORDER NUMBER DOC 2303675 6.2.1 SAFETY INSTRUCTIONS 6.2 C OMMISSIONING Every time before starting up, the f ollowing points should be obser v ed as laid down in the operating manual: - Obser ve all safety regulations in ac cordance with Chapter 4. - Carr y out commissioning properly . High-pressure spr ay jet! D[...]

29 OPERA TING MANU AL VERSION 10/2013 ORDER NUMBER DOC 2303675 Before ev er y start-up, the f ollowing points should be observed: - Secure gun with safety clip . - Check the permissible pressures . - Check all connecting par ts f or leaks. - Check hoses for damage . It should be ensured that the device is in the following stat e before carrying out[...]

30 ➁ ➀ B_04303 B_04302 1 2 B_04099 OPERA TING MANU AL VERSION 10/2013 ORDER NUMBER DOC 2303675 Cobr a EMERGENCY STOP In the event of unforeseen oc currences, the ball valv e (1) should be ven ted immediat ely and the relief valve (2) opened . vent Open Switch position Circulation[...]

31 "? 6 1 9 2 7 4 5 B_04240 3 OPERA TING MANU AL VERSION 10/2013 ORDER NUMBER DOC 2303675 6.2.2 BASIC FL USHING V Note: During the  ushing procedure , brie y press both valve depressors ( V ). 1 Place empty tank (5) under return tube (4). 2 Plac e suction hose (7) in a tank with cleaning agent (6). 3 Adjust the pressure re[...]

32 B_04301 2 3 1 B_04303 OPERA TING MANU AL VERSION 10/2013 ORDER NUMBER DOC 2303675 6.2.3 FILLING WITH W ORKING MA TERIAL Relief valve Circulation mode Spraying mode 1 Place suction hose (7) and return tube (4) into the tank with the working material (6). 2 Adjust the pressur e regulator (1) to appro x. 0.05 MP a; 0.5 bar; 7.25 psi. 3 Open relief [...]

33 OPERA TING MANU AL VERSION 10/2013 ORDER NUMBER DOC 2303675 7.1 SPRA YING 1 Close gun. 2 Close ball valve. 3 Release the system by opening the gun. 4 Close and secure gun. If the system has been used with 2K products: 1 Secure gun and place nozzle in the gun. 2 Slowly open the ball valve . 3 Set the required w ork ing pr essure on the pressure r[...]

34 OPERA TING MANU AL VERSION 10/2013 ORDER NUMBER DOC 2303675 7.3 DEC OMMISSIONING AND CLEANING 7.4 L ONGTERM ST ORAGE Note: The device should be cleaned f or maintenance purposes, etc . Ensure that no remaining product dries on and sticks to the device. Proc edure: 1 Carry out work interruption -> refer t o Chapter 7.2. 2 Carry out basic ?[...]

35 OPERA TING MANU AL VERSION 10/2013 ORDER NUMBER DOC 2303675 8 TROUBLESHOO TING, MAINTENANCE , AND REP AIR Problem C ause Remedy Pump does not w ork. Air motor does not work or stops . Open and close ball valve on the pressure r egulator unit or brie y disconnect compressed air supply . No pressure indication on the pr essure gage (air pressur[...]

36 OPERA TING MANU AL VERSION 10/2013 ORDER NUMBER DOC 2303675 Problem C ause Remedy Pump runs fast when the spray gun is closed . V alves worn. Replace the parts. Loss of pow er due to sever e icing. There is a lot of condensation wat er in the air supply . Install a water separator . If none of the causes of malfunction mentioned are present, the[...]

37 OPERA TING MANU AL VERSION 10/2013 ORDER NUMBER DOC 2303675 9 MAINTENANCE 1 Check and clean the high-pressure  lter ev er y day or as r equired. 2 Each decommissioning procedure should be carried out as described in Chapter 7.3. 3 Check hoses, pipes, and couplings every day and replace if nec essar y . W A GNER recommends having all spra ying[...]

38 B_04241 1 B_04242 B_04243 A 5 X OPERA TING MANU AL VERSION 10/2013 ORDER NUMBER DOC 2303675 9.3 HY DRAULIC ST AGE MAINTENANCE 9.3.1 CHECKING THE OIL LEVEL Dismount the device onto a stand as shown in the picture and turn it upside down. Observe the  ll level marking (X) on the oil tank . 1 Start up the pump for a shor t time without an y prod[...]

39 B_04241 1 4 3 B_04244 2 OPERA TING MANU AL VERSION 10/2013 ORDER NUMBER DOC 2303675 Discharging oil Proc edure: 1 Decommission and clean the devic e -> follow Chapter 7.3 up to and including point 6. 2 P osition device as shown in the picture and dismount the hood and casing. 3 Unscrew piston co ver (1). 4 Place empty oil collector (2) under [...]

40 B_04245 8 7 4 9 5 6 B_04246 17 mm; 0.67in OPERA TING MANU AL VERSION 10/2013 ORDER NUMBER DOC 2303675 Filling h ydr aulic stage with oil Proc edure: 1 T urn pump (mounted on the base frame) upside down. 2 Unscrew and remo ve threaded plug (5). 3 Unscrew 2 locking screws (4) and replace with 2 scr ew  ttings (6) from the oil  lling set. 4 C[...]

41 B_04243 A 5 X B_04247 9 1 5 OPERA TING MANU AL VERSION 10/2013 ORDER NUMBER DOC 2303675 Ve n t Proc edure: 1 T urn the pump upside down. Remov e the threaded plug (5). 2 Slowly star t up (vent) the pump until no air bubbles appear fr om the oil suction  tting. 3 Oil level A in the oil tank has to be within the speci ed markings ( X). 4 Scr[...]

42 OPERA TING MANU AL VERSION 10/2013 ORDER NUMBER DOC 2303675 Ac cessories list for C obra 40-10 Order No . Designation A 2301858 Diaphragm pump Cobra 40-10 1 322912 Hydraulic oil (for pressur e stage) 250 ml; 250 cc 2 236219 Grounding cable 3 m; 9.8 ft 3 2333479 AirC oat  lter pressur e regulator 4 341434 Double open-end wrench 7 2325343 F itt[...]

43 B_04234 11 17 13 24 21 20 25 15 12 14 12 7 A 51 52 B_04285 3 Cobr a 40-10 AirCoat 16 1 4 2 53 OPERA TING MANU AL VERSION 10/2013 ORDER NUMBER DOC 2303675[...]

44 OPERA TING MANU AL VERSION 10/2013 ORDER NUMBER DOC 2303675 11 SP ARE P ARTS 11.1 HOW CAN SP ARE P ART S BE ORDERED ? Incorrect maintenance/r epair! Risk of injur y and damage to the device . Hav e repairs and part replacements carried out only by specially trained sta or a W AGNER ser vic e center . Before all work on the device and in the e[...]

45 13 3 2 6 7 25 Nm; 18 lbft 10 12 11 1 9 5 4 8 7 B_04250 30 Nm; 22 lbft 16 17 14 15 OPERA TING MANU AL VERSION 10/2013 ORDER NUMBER DOC 2303675 11.2 OVERVIEW OF THE C OBRA 4 01 0 C OMPONENTS Order No . Designation 1 1 - Air motor 3/53 2 1 - Preassembled C obra 40-10  uid section 3 1 322436 Air motor casing 4 1 322437 Pressure stage casing 5 [...]

46 OPERA TING MANU AL VERSION 10/2013 ORDER NUMBER DOC 2303675 11.3 C OBRA 40 1 0 AIR MO T OR Order No . Designation 1 1 9998718 Drive fastener 2 1 367318 Shoulder screw 4 3 1 9925033 Washer 4 1 367311 Hood 4 5 1 367319 S ound absorbing mat 4 6 1 9999152 Velcr o fastener coating part 7 1 9999151 Velcr o fastener adhesive part 8 1 367318 Shoulder[...]

47 58 58 59 60 60 * 59 59 Cobr a 40-10 1 2 3 4 54 5 8 9 10 31* 30 46* 32 11* 12* 13 14 15 16 52 17 18 19 20 21 34 56 56 57 27 33 35 36* 37* 38 39 40 41* D 25 22 43* D 42 44 47 48 45 44 49 51 50* 46* 26 26 55 28 29 27* 6 7 10-15 Nm; 7-11 lbft 20-25 Nm; 15-18 lbft 2-3 Nm; 1.5-2.2 lbft B_04251 53 50* OPERA TING MANU AL VERSION 10/2013 ORDER NUMBER DOC[...]

48 OPERA TING MANU AL VERSION 10/2013 ORDER NUMBER DOC 2303675 Order No . Designation 43 1 9971137 O-ring 44 4 9900316 Hexagon socket head cap screw M6x50 45 2 9907039 Hexagon socket head cap screw M6x80 46 1 9971313 O-ring 47 1 2341175 Manometer with air regulat or 0-10 bar , G1/8" 48 1 2309972 P ressure regulat or 49 1 - Distributor piece mi[...]

49 OPERA TING MANU AL VERSION 10/2013 ORDER NUMBER DOC 2303675[...]

50 51 53 54 55 53 57 59 60 61 62 70 63 108 7 7 B_04252 29 59 30 31 32 33 34 35 109 111 111 OPERA TING MANU AL VERSION 10/2013 ORDER NUMBER DOC 2303675 11.4 C OBRA 40 1 0 FL UID SECTION Cobr a 40-10  uid section Order No . Designation 1 1 2329898 S ealing sleev e 2 4 9900204 Hexagon screw 3 4 9920102 W asher 4 2 341241 I nlet valv e depressor [...]

51 1 2 3 5 6 7 8 9 10 11 14 15 100 110 99 98 97 96 95 94 18 93 17 35 33 34 32 31 46 47 49 50 41 101 27 102 26 66 67 38 40 16 91 19 69 20 21 22 23 92 24 25 67 26 102 27 4 89 90 78 110 110 13 112 105 78 70 Nm; 52 lbft 90 Nm; 66 lbft 30 Nm; 22 lbft 50 Nm; 37 lbft 2 Nm; 1.5 lbft 103 20 Nm; 15 lbft 20 Nm;14.8 lbft 40 Nm; 29.5 lbft 110 110 110 110 110 42[...]

52 OPERA TING MANU AL VERSION 10/2013 ORDER NUMBER DOC 2303675 Cobr a 40-10  uid section Order No . Designation 6 8 9907234 Hexagon screw 7 10 9920107 W asher 8 2 9974184 O-ring 9 2 322411 Valve  tting 10 2 341336 Clasp 11 1 322914 I nlet valve set, complet e (comprising 2 valves), see Chapter 11.9 13 1 2330810 Connection piece 14 1 322410 Fl[...]

53 OPERA TING MANU AL VERSION 10/2013 ORDER NUMBER DOC 2303675 Cobr a 40-10  uid section Order No . Designation 54 1 9974181 Piston sealing pro le Z5 55 1 322426 Piston air motor 3 57 1 9974115 O-ring 59 2 9974185 Seal wiper ring, pro le EM 60 1 322425 Air motor  ange 61 1 367258 Grounding, complete 62 1 369290 Pilot valve 63 1 9998675 [...]

54 2 3 4 5 6 7 11 6 8 1 10 1.9 ±0.1 B_01230 B_01232 7 4 5 6 3 2 1 OPERA TING MANU AL VERSION 10/2013 ORDER NUMBER DOC 2303675 11.9 C OBRA 40 10 INLET V AL VE Order No . Designation 1 1 322914 Complete C obra 40-10 inlet valve set 2 2 9912100 Hexagon nut with clamp 3 2 344334 Spring guide 4 2 190304 Pressur e spring 5 2 158333 Guide 6 4 341331 S[...]

55 8 5 7 3 6 4 1 2 1.5 B_01231 OPERA TING MANU AL VERSION 10/2013 ORDER NUMBER DOC 2303675 11.11 RELIEF V AL VE Order No . Designation 1 1 169248 Relief valve, complet e 2 1 9920602 Adjusting washer 3 1 169346 Pressur e spring 4 1 9920202 Washer 5 1 9971395 O -ring 10x1.25 6 1 9971486 O -ring 4x2 7 1 9992528 Loctite 270 50 ml; 50 cc 8 1 9971367 Spi[...]

56 B_02292 1 2 3 4 6 7 8 5 B_04258 2 6 4 5 3 OPERA TING MANU AL VERSION 10/2013 ORDER NUMBER DOC 2303675 Order No . Designation 1 1 322052 Base frame Cobra 40-10 2 1 322442 Base frame pressed 3 1 322443 F rame pipe 4 2 9990861 Plug 5 4 9999209 Saddle feet for round tubes 6 2 9910204 S elf-locking hexagon nut, M6 7 2 9900202 Hexagon screw M6x40 8 4 [...]

57 4 1 2 17 15 10 6 5 9 7 8 5 13 11 12 B_03932 3 14 16 A B OPERA TING MANU AL VERSION 10/2013 ORDER NUMBER DOC 2303675 11.14 TROLLEY Distance: Order No . Designation 1 1 2325901 T rolley , complet e 2 1 -- Stand, left, 4"-6" (welded) 3 1 -- Stand, right, 4"-6" (welded) 4 4 9907140 Hexagon screw DIN931 M6x75 5 6 9910204 Self-lock[...]

58 5 4 3 7 2 10 9 8 6 1 B_03642 OPERA TING MANU AL VERSION 10/2013 ORDER NUMBER DOC 2303675 11.16 SMALL QUANTITY CUP Order No . Designation 1 2321424 Small quantity cup 1 1 2320844 Union nut with bayonet 2 1 2321426 Low-pr essure mini ball valve G1/2 3 1 2320841 Gravity feed cup adapter HSM 4 2 2321427 Gravity feed cup SP A easy line T A 5 2 232167[...]

59 OPERA TING MANU AL VERSION 10/2013 ORDER NUMBER DOC 2303675 The guarantee period amounts to 36 months . For industrial use or equal w ear , such as shift operations in particular , or in the event of rentals , it amounts to 12 months. Systems driv en by petrol or air are also guarant eed for a 12 month period. The guarantee period begins with th[...]

60 OPERA TING MANU AL VERSION 10/2013 ORDER NUMBER DOC 2303675 Guarantee claims cannot be consider ed - for par ts that are subject to w ear and tear due to use or other natural wear and tear , as well as defects in the product that are a r esult of natural wear and tear , or w ear and tear due to use. T his includes in par ticular cables , valves,[...]

61 OPERA TING MANU AL VERSION 10/2013 ORDER NUMBER DOC 2303675 12.3 CE DECLARA TION OF C ONFORMITY Cobra 40-10 complies with the follo wing guidelines: 2006/42/EC 94/9/EC (A TEX Directive) Applied standards, in particular: DIN EN ISO 12100: 2011 DIN EN 1127-1: 2011 DIN EN ISO 4413: 2011 DIN EN 13463-1: 2009 DIN EN ISO 4414: 2011 DIN EN 13463-5: 201[...]

62 OPERA TING MANU AL VERSION 10/2013 ORDER NUMBER DOC 2303675 Ser vic e Network in German y W A GNER C ONT ACT NETWORK GERMAN Y ; A V AILABLE ON THE INTERNET A T : Berlin Te l . F ax Stuttgart Te l . F ax Grünstadt T el.: +49 (0) 63 59/ 87 27 55 0 F ax: +49 (0) 63 59/ 80 74 80 Munich T el:. +49 (0) 89 /6 14 00 22 F ax: +49 (0) 89 / 6 14 04 33 Rat[...]

[...]

C E R T I F I E D w ww .w agner-group .c om Subject to changes and errors. A Te l . F ax DK Te l . F ax GB F ax B Te l . F ax E Te l . F ax I Te l . F ax CH Te l . F ax F Te l . F ax NL Te l . F ax D T el.: +49 (0) 75 44 / 505 -1664 F ax: CZ Te l . F ax S Te l . F ax[...]