Westell Technologies 6100 manual

© Copyright 2004 Westell, Inc. 030-300411 Rev. A L ITE L INE ™ E THERNET B RIDGE (M ODEL 6000) L ITE L INE ™ D UAL C ONNECT B RIDGE (M ODEL 6110) L ITE L INE ™ D UAL C ONNECT NAT R OUTER (M ODEL 6100) U SER G UIDE[...]

030-300411 Rev. A 2 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide This User Guide provides information about the LiteLi ne™ Ethernet Bridge (Model 6000), t he LiteLine™ D ual Connect Bridge (Model 6110), and the LiteLin e™ Dual Co nnect NAT Router (6100). The following table ou tlines the sections of this document that app ly to eac[...]

030-300411 Rev. A 3 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide TABLE OF CONTENTS 1. PRODUCT DESCRIPTIO N (MOD ELS 6000, 6 100, 61 10) .................................................................................. 6 2. SAFETY INS TRUCTIONS (M ODELS 6000, 6100, 6110) ...................................................................[...]

030-300411 Rev. A 4 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 11.5 Public LAN Co nfigura tion....................................................................................................... ................ 61 11.6 Single Static IP Configuration ...................................................................................[...]

030-300411 Rev. A 5 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 19.1 Installing Diagnostic So ftware fo r Windows ..................................................................................... .... 130 19.2 Uninstalling D iagnostic Software for Windows ..............................................................................[...]

030-300411 Rev. A 6 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 1. PRODUCT DESCRIPTION (MODELS 6000, 6100, 61 10) The Westell® Modem provides reliable, high-speed, Internet access to your existing home or office phone line. Your ADSL c onnection is “a lways-on” endi ng the hassl es of dial-up m odems and busy signals. I nstallation[...]

030-300411 Rev. A 7 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 3. REGULA T OR Y INFORMA TION (MODELS 6000, 6100, 61 10) 3.1 FCC Compliance Note This equipm ent has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the Federal Com munication Comm ission (FCC) Rules. These limits are des[...]

030-300411 Rev. A 8 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide The telephone company may mak e changes to their facilities, equipment, o perations, or procedures that co uld affect the operation of this equipment. If this happens, the te lep hone company will prov ide advance notice in order for you to make the m odifications necessary[...]

030-300411 Rev. A 9 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 4. NETWORKING REQUIREMENTS (MODELS 6000, 6100, 61 10) The followin g system specifi cations are requ ired for optim um perform ance of the Modem via 10/100 B ase-T or USB installation. MODEL CONNECTI ON TYPE MINIMUM SYSTEM REQUIREMENTS NETWORKING SCHEME 6000 6100 6110 ETHER[...]

030-300411 Rev. A 10 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 5. INST ALLING THE HARDW ARE (MODELS 6000, 6100, 61 10) To obtain additional information on hardware features and i nstallation, see APPENDIX B –Hardware Features. 5.1 Installation Requirements To install the Westell Modem, you will need the following : • A Network Int[...]

030-300411 Rev. A 11 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 5.4 Installations This section e xplains the pr ocedures for i nstalling via 10/100 Base-T/Et hernet or U SB connection. NOTE: Please wait until you have received notifica tion from your Internet service provider (I SP) that your DSL line has been activa ted before install[...]

030-300411 Rev. A 12 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide Figure 1. Connection vi a 10/100 Base-T Etherne t NOTE: The modem features sho wn in Figur e 1 apply to t he Model 61 00 and Model 6110 products . The Model 6000 product has only Ethernet . The power s witch is opti onal for all products dis cussed in this document. 5.4.2 [...]

030-300411 Rev. A 13 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide Figure 2. Connection vi a USB NOTE: The modem features sho wn in Figur e 2 apply to t he Model 61 00 and Model 6110 products . The Model 6000 product has only Ethernet . The power s witch is opti onal for all products dis cussed in this document. 5.4.3 Installation via 10/[...]

030-300411 Rev. A 14 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 4. Connect the blue USB cable f rom the blue USB connector marked on the rear panel of the Modem to the USB port on the PC. Congratulations! You have completed the simultaneous hardware (Ethern et and USB) installation for Models 6100 and 6110. You must now go to section 6[...]

030-300411 Rev. A 15 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 6. INST ALLING THE USB DRIVERS (MODELS 6100, 61 10) If you are using only Etherne t ports, USB driver installation is not neces sary . The Microsoft® Plug and Play auto- detect feature recognizes when new hardware has been installed. After you connect the Mode m to the PC[...]

030-300411 Rev. A 16 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide Figure 5. Add New Hardware 2. Windows 98: Click the option button for Search for the best driver for your de vice. (Recommended) . See Figure 6. Clic k Next . Figure 6. Window s 98[...]

030-300411 Rev. A 17 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 3. Windows 98: Select CD- ROM drive opti on. See Figure 7. Click Next . Windows will search for the driver. Figure 7. Window s 98 4. Windows 98: Select option button The updated driver (Recommended) Westell Dual Connect Modem. See Figure 8. Clic k Next . Note : If Figure 8[...]

030-300411 Rev. A 18 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 5. Windows 98: Windows will display the location of th e driver. See Figure 9. Click Nex t. Note : The drive “letter” may vary. Figure 9. Window s 98 6. Windows 98 : Remove the Westell CD from the CD-ROM Drive. Next, insert th e Windows operating system CD into the CD-[...]

030-300411 Rev. A 19 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 8. Windows 98 : Figure 12 ma y pop up, depending o n how Windows 98 wa s installed on the com puter. The installation of the Westell modem requ ires files that are supplied by Microsoft for Window s 98. If Figure 13 pops up, inser t the Windows 98 Op erating System CD into[...]

030-300411 Rev. A 20 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 9. Windows 98 : The window below confirms that the PC has finished loading th e drivers (Figure 14). Click Finish . Figure 14. Windows 98 10. Windows 98 : Click Yes to restart your c omputer. See Fi gure 15. Figure 15. Windows 98 Congratulations! You have completed the sof[...]

030-300411 Rev. A 21 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 6.3 Installing the USB Drivers for Windows ME NOTE: The actual information displayed in the USB screens may vary according to product. 1. Windows ME: After you have connected the Modem to your PC, the Found New Hardware window appears (Figure 16). In a few mom ents, the Ad[...]

030-300411 Rev. A 22 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 2. Windows ME : Windows will display the lo cation of the driver. See Figure 18. Figure 18. Location of Hardware Device Driver 3. Windows ME : The wi ndow below confirms that the PC has fi nished loading the drivers. See Figure 19. Click Finish. Figure 19. Found New Hardwa[...]

030-300411 Rev. A 23 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 4. Windows ME : When the Syst em Settings Chan ge screen ap pear s, the USB d riv ers are installed properly. See Figure 20. Click Yes. Figure 20. Restart the Computer Congratulations! You have completed the software inst allation for t he USB drivers . After the computer [...]

030-300411 Rev. A 24 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 2. Windows 2000: The Install Hardware Device Drivers window appears. Select Search for a suitable driver for my device (recom mended) See Figu re 23. Click Next . Figure 23. Search for Device Driver 3. Windows 2000: The Driver Files Search Results window appears. Sel ect t[...]

030-300411 Rev. A 25 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 4. Windows 2000: The Driver Files Search Results windo w appears (Fi gure 25). Cl ick Next . Note : The driv e “letter” may vary. Figure 25. Driver Files Se arch Results 5. Windows 2000: The window below confirms that th e PC has finished loading th e drivers (Figure 2[...]

030-300411 Rev. A 26 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 6. Windows 2000 : When th e System S etting s Change screen ap pears , the USB dr iv ers are installed properly. See Figure 27. Click Yes. Figure 27. Restart Your Computer Congratulations! You have completed the software inst allation for t he USB drivers . After the compu[...]

030-300411 Rev. A 27 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 2. Windows XP : The window below confirms that the PC has finished load ing the drivers (Figure 29). Click Finish . Figure 29. Windows XP Congratulations! You have completed the software inst allation for t he USB drivers . After the computer has restarted, the Modem is re[...]

030-300411 Rev. A 28 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 7. CONFIGURING THE MODEM FOR INTERNET CONNECTION (MODEL 6100) To surf the Internet usin g your Westel l Modem, you m ust set up y our account pr ofile, confirm your DSL sy nc, and establish a PPP session with your Intern et service provider (ISP). Re fer to the Internet se[...]

030-300411 Rev. A 29 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide If you clicked on OK, the following screen will be displayed. This screen will allow you to set up your account profile. NOTE: Before you set up your account prof ile, you must obtain your Account I D , Account Password, and VPI/VCI values from your Internet servi ce provi[...]

030-300411 Rev. A 30 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide Enter the VPI and VCI values ( 0 for VPI and 35 for VCI) y ou obtained f rom your Internet service provider. Cl ick on next . N OTE: Depending on your In ternet Service Provider, the VPI/VCI screen m ay come pre-configured and it will be disp layed here. In this case, you [...]

030-300411 Rev. A 31 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide Select the Protocol type that you obtained f rom your Inte rnet Service Pro vider. Click on next . When the SET-UP COMPLETE screen appears , you have successfully com pleted your Account Profile setup. Click on don e . N OTE: Depending on your In ternet Service Provider, t[...]

030-300411 Rev. A 32 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide If you clicked on don e in th e SET-UP COMPLETE screen, the following pop-up scre en will be disp layed. Click on OK. If you clicked on OK, the follow ing screen will be displayed. The Router will be reset and the new configuration will take effect.[...]

030-300411 Rev. A 33 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 7.2 Establishing a PPP Session View the Connectio n Rate at the Connection Overview section in the following Home page. If this status reads No DSL Connection , check the DSL physical connection, which is expl ained in sectio n 5 (INSTAL LING THE HARDWARE) . NOTE: If no DS[...]

030-300411 Rev. A 34 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide Once a PPP session has been established, the PPP Status will display UP . Congratulations! You may n ow surf the Internet.[...]

030-300411 Rev. A 35 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 7.3 Disconnecting a PPP Session If you are rea dy to disco nnect from y our Internet se rvice provider , click on the Disconnect button in th e Connection Overview screen (the preceding screen ). The follo wing p op-up screen wi ll appear. Cli ck on OK to discon nect the P[...]

030-300411 Rev. A 36 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide To establish y our PPP sessi on, click on c onnect . (If you powered down the Modem, you will need to logon first.)[...]

030-300411 Rev. A 37 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 8. SETTING UP MACINT OSH OS X (MODEL 6100) This section provi des instructions on how to use Macintosh OS X (Ope rating System 10) wit h Westell Modems. Follow the instructions in this section to create a new network confi guration fo r Macintosh OS X. NOTE: The USB instal[...]

030-300411 Rev. A 38 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide Create a New Location After selecting the Network icon at the System Preferences screen, the Network screen will be displayed. Select New Location from the Location field. Name the New Location After selecting New Location from the Network screen, the following screen will[...]

030-300411 Rev. A 39 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide Check the IP Connection To verify that the computer is communicating with the Modem, follow the instructions below. 1. Go to t he “ Apple ” icon in the upper right corn er of the screen and select System Preferences . 2. From the Syste m Preferences screen , click on t[...]

030-300411 Rev. A 40 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide Create a user Account In the address wind ow of your Internet Exp lorer web browser, typ e Http://dslrouter/ or t ype Http://192.168 .1.1/ and press enter on your keyboard. The Getting Started screen will be displayed. You may now begin you r Account Setup. Refer to sectio[...]

030-300411 Rev. A 41 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide Advanced Configuration instructions are explained in Section 9 through Section 15. The instructions apply only to Model 6100. If you are an advanced user, follow the instructions provided in sections 9 through 15. NOTE: Sections 9 through 15 will refer to the Model 6100 mo[...]

030-300411 Rev. A 42 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide Connection Overv iew Displays your DS L connection rate. Connection Name This Connection Name is from the connection profile that you estab lished in section 7. PPP Status UP = PPP session e stablished DOWN = No PPP session established. Connect/Disconnect CONNECT = Establi[...]

030-300411 Rev. A 43 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide If you clicked on new in the New Connectio n screen, the following screen will be displayed. This screen will allow you to edit a connection pr ofile. Select a pr ofile name from the Connection Name field and cli ck on the edit button adjacent to the name. If you clicked o[...]

030-300411 Rev. A 44 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide Connection Na me This field all ows you to e nter a new co nnection nam e of your choi ce (up to 64 characters). Account ID Use the same account ID that you us ed in section 7 if you are connecti ng to the same Service Provider. If you have multiple Service Providers, you [...]

030-300411 Rev. A 45 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 10. ST A TUS (MODEL 6100) 10.1 Connection Summary The following settings will be displayed if you select Connection Summary from the Status menu. DSL Connection Inform ation Connection Rate This field will let you know if you have a DSL Sync (UP/DOWN) and the DSL rate at w[...]

030-300411 Rev. A 46 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide Dropped: Monitors informat ion traffic that was not succe ssfully received (IN) or transmitted (OUT) due to your firewall settings. PPP Connection Information Connection Name This is from the connection profile that you established in section 7. Connection Duration This fi[...]

030-300411 Rev. A 47 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 11. CONFIGURA TION (MODEL 6100) 11.1 VC Configuration The following settings will be displayed if you select VC Configuration from the Configuration menu. NOTE: The ac tual informati on displayed i n this screen m ay vary, depe nding on the network connect ion establishe d[...]

030-300411 Rev. A 48 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide This setting is only valid if one of the Virtual Chann els is configured for Bridge m ode. Bridge Multicast Factory Default = CHECKED When this setting is CHECKED, the Router will allow Multicast IP packets to/from the WAN. When this setting is NOT CHECKED, the Router will[...]

030-300411 Rev. A 49 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide NOTE: The actual information displayed in this screen may vary, depen ding on network con nection establi shed. If you have made any changes to your VC settings, you need to save them. To save the new VC settings, click on OK when asked Set this PPPoE VC configuration? If [...]

030-300411 Rev. A 50 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide VC 1 Config uration VPI This setting allows you to chan ge your VPI (Virtual Path Indicator) value for a particular VC , which i s defined by your Serv ice Provider. VCI This setting allows you to chan ge your VCI (Virtual Channel Indicator) value for a particular VC , whi[...]

030-300411 Rev. A 51 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide Configuring the Router’s Protocol Settings If you want to change you r Router’s protocol setti ng, select VC Configurati on from the Configur ation menu. Next, select edit from your VC Configuration menu on any of your existing VC (Virtual Connections) settings. The fo[...]

030-300411 Rev. A 52 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide If you selected Bridge as the protocol you want to use, the following screen will be displayed . Select a mode from the options displayed at the Mode pull-down arrow und er VC 1 – Bridge Settings . VC 1 Config uration VPI This setting allows you to chan ge your VPI (Virt[...]

030-300411 Rev. A 53 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide PPPoA = Point to Poin t Protocol over ATM (Asynchr onous Transfer Mode) PPPoE = Point to P oint Protocol over Ethernet Bridge = Bri dge Protoc ol Classical IPoA = I nternet Protocol over ATM (Asy nchronous T ransfer Mode ). This is an ATM encaps ulation of the IP pr otocol[...]

030-300411 Rev. A 54 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide If you clicked on set VC , the following pop-up screen will be disp layed. Click on OK when asked Set this Bridge VC configuration? If yo u click on cancel , t he new VC settings will not be saved. 11.2 DNS Configuration The following settings will be displayed if you sele[...]

030-300411 Rev. A 55 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide IP Address Displays the IP address that is assigned to the Host Nam e. Discover Local Devices This field displays a list of the computers on the LA N that were assigned a DH CP Address. The com puter name, MAC ad dress, and IP a ddress of each disco vered device i s displa[...]

030-300411 Rev. A 56 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide If you clicked on add , th e following screen will be displayed. Th e Hos t Name an d IP Address have been added to the Static Host Assignment.[...]

030-300411 Rev. A 57 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 11.3 DHCP Configurati on (Private LAN) The following settings will be displayed if you select DHCP Conf iguration from the Configuration menu. DHCP Server This setting allows the ADSL rou ter to automatically assign IP addresses to local devices connected on the LAN. Weste[...]

030-300411 Rev. A 58 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 11.3.1 Disabling the DHCP Server If you click on the pull-down arrow at DHCP Server: , a list of options will be displayed. If you want t o disable y our DHCP serve r, select Off from the DH CP Server pull-down arrow. Click on sa ve. If you selected Off at DHCP Server :, t[...]

030-300411 Rev. A 59 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide If you clicked on save , in the preceding DHCP Co nfiguration screen , the following pop-up screen will appear. Click on OK. 11.3.2 Enabling the DHCP Server If you want to enable y our DHCP Server settings, select Private LAN at the DHCP Server pull-do wn arrow. If you sel[...]

030-300411 Rev. A 60 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide If you clicked on save , in the preceding DHCP Co nfiguration screen , the following pop-up screen will appear. Click on OK. 11.4 Private LAN Configuration The following settings will be displayed if you select Private LAN Configuration from the Configuration menu. (Privat[...]

030-300411 Rev. A 61 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide Private LAN DHCP Server E nable Default = CHEC KED If this box is CHECKED, it enables DHCP addresses to be served from the Private LAN pool. Private LAN Enable Default = CHECKED If this box is CHECKED, it enables the addresses from the Private LAN to use the NAT interface.[...]

030-300411 Rev. A 62 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide Public LAN DHCP Ser ver Enable Default = NOT CHECKED If this box is CHECKED, it enables DHCP addresses to be served from the Pu blic LAN pool . Public LAN Enable Default = NOT CHECKED If this box is CHECKED, it enables the addresses from the Public LAN to bypass the NAT in[...]

030-300411 Rev. A 63 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide If you clicked on the Public LAN Enable box, the following screen will be displayed. Click on save.[...]

030-300411 Rev. A 64 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide If you made changes and clicke d on save in the preceding screen, the follo wing pop-up screen will be displayed. Click on OK. Th is will save you Public LAN Configuration settings. If you click on Cancel , your new settings will not take effect. NOTE: DHCP Lease Time is d[...]

030-300411 Rev. A 65 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide If you clicked on OK in the preceding sc reen , the following screen will be displayed. The Router will be reset and the new configuration will take effect. After the Router has been reset, confirm that you have a DSL sync and that your PPP session displays UP. NOTE: Whene[...]

030-300411 Rev. A 66 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 11.6 Single Static IP Configuration The following settings will be displayed if you select Single Static IP Configuration from the Configuration menu. STOP: Static NAT m ust be disabled bef ore you can enabl e Single Static IP . To disabl e Static NAT, select Service Confi[...]

030-300411 Rev. A 67 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide If you clicked on enable, the following po p-up screen w ill appear. Click on OK to enable this device for Single Static IP. Click on Cancel if you do not want to enable Single Static IP. NOTE: The actual inform ation disp layed in this screen may vary. If you clicked on O[...]

030-300411 Rev. A 68 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide If you clicked on OK in the preceding sc reen , the following screen will be displayed. The Router will be reset and the new configuration will take effect. After the Router has been reset, confirm that you have a DSL sync and that your PPP session displays UP. 11.6.2 Disa[...]

030-300411 Rev. A 69 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide If you clicked on disable in the preced ing screen, the following p op-up screen will be displayed . Click on OK. If you clicked on OK in the Disable IP Passthrou gh? screen, the following pop-up screen will be displayed. This screen will allow the modem to be reset and th[...]

030-300411 Rev. A 70 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 12.7.3 Configuring Static IP on Your PC If you have static IP service (your Internet service provid er (ISP) supplies static IP addresses), you will need to perform the following steps to obtain Internet access: 1. Configure your PC settin gs to obtain an IP address au tom[...]

030-300411 Rev. A 71 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 11.7 Service Configuration The following settings will be displayed if you select Service Configuration from the Configur ation menu. Westell has devel oped an extensive list of NAT ser vices and you may select any service from this list. By selecting your specific NAT ser[...]

030-300411 Rev. A 72 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 12.8.1 Creating a New NAT Service Profile If you select new from the preceding Service Configur ation screen, the Create new Service Profile? pop-up screen will be displayed. Click on OK to be gin creating y our new NAT se rvice profi le. Click Cancel if you do not want to[...]

030-300411 Rev. A 73 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide If you selected “ A New Service Profile #1 ” from the Current Profile pull-down arrow, the following screen will be displayed. T his screen sh ows that you have chosen to c reate a new NAT service profile . You may create up to four NAT service p rofiles and atta ch an[...]

030-300411 Rev. A 74 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide Once you have created a NAT service prof ile, you may edit the profile. If you select edit from the Service Configuration screen, the following screen will be displayed. By selecting the edit button, you can make change s to your NAT profile by adding or dele ting NAT appl[...]

030-300411 Rev. A 75 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide If you clicked on save in the Edit NAT Profile screen, the following pop-u p screen will be disp layed. Click OK to save your new profile settings. If you click on Cancel , your new profile settings will n ot be saved. 12.8.3 Adding NAT Services to a Profile This section e[...]

030-300411 Rev. A 76 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide For example, the screen bel ow displays America Online as the NAT service selected. Once you have selected a service, click on enable. If you clicked on enable , the following Host Service screen will be displayed. Click on OK. This will lo ad the new NAT Configuration and[...]

030-300411 Rev. A 77 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide NOTE: You can attach multiple NAT services to your profile. However, for each NAT service that you attach to your profile, you must first select the new NAT service. Then, you must load the new NAT Configuration, as explained earlier in this section. Once you have selected[...]

030-300411 Rev. A 78 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 11.8 Firewall Configuration The following settings will be displayed if you select Firewall Configuration from the Configuration m enu. High High security level only allows basic Internet functionality . Only Mail, News, Web, FTP, and IPSEC are allowed. All other traffic i[...]

030-300411 Rev. A 79 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide If you select Edit in the preceding Firewall Configuration screen, the User Defined Firewall Rules screen will be displayed. This screen allows you to change th e security para meters on your Inbou nd and Outbound Fire wall rules via the User Define d Firewall Rules pull-d[...]

030-300411 Rev. A 80 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide If you want to save your new firewall settings, click on save in the screen labeled User Define Firewall Rules . NOTE : Westell recommends that you do not chan ge the settings in the User Defined Firewall Rules screen. If y ou need to reset the Router to factory default se[...]

030-300411 Rev. A 81 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide If you select Help in the screen labeled User Defined Firewall Rules , the following screen will be displayed. This screen gives a detailed expla nation of t he Firewall Rul es. 11.9 ATM Loopbacks If you select ATM Loopbacks from the Configuration menu, the following setti[...]

030-300411 Rev. A 82 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 11.10 Turbo TCP If you select Turbo at the Configuration menu, the following screen will be displayed. Click on the Turbo TCP Enable box to enable Turbo. NOTE: Turbo is a network t raffic priorit ization and queuing m ethod that dram atically im proves the perf ormance of [...]

030-300411 Rev. A 83 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide If you clicked on the Turbo TCP Enable box, a check mark will appear in the box. Clic k on save. If you clicked on save, the following pop-up screen will be disp layed. Click on OK to save the setting.[...]

030-300411 Rev. A 84 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 12. SETTING UP ADV ANCED SER VIC E CONFI GURA TION (MODEL 6100) You can set u p additional Service Configu ration optio ns for your NAT Router t hat allow you t o enter t he port forwardin g and trigger ports ranges of your choi ce. Go to Confi guration at t he homepage m [...]

030-300411 Rev. A 85 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 12.1 Port Forwarding Ranges of Ports To select Port Forwarding Ranges of Ports , click on define custom servi ce from the Se rvice Configuration screen, and then select Port Forwarding Ranges of Ports fr om the Custom Service screen. Click on Next . The follow settings wil[...]

030-300411 Rev. A 86 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide Service Name The NAT service for which y ou are confi guring Po rt Forwardi ng. Type The type of NAT servi ce configuration you selected. Protocol The type of P rotocol that is used to r un this NAT service. TCP- Transm ission Contr ol Protocol. UDP-User Dat agram Protocol[...]

030-300411 Rev. A 87 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 12.4 Adding Local Trigger Ports If you ma de changes in the L ocal ‘Trigger’ Port Range screen and clicked next , the following screen will b e displayed. You may either click on close to accept the changes, or click on add to go back to the Trigger Ports screen, enter[...]

030-300411 Rev. A 88 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 12.5 Static NAT To configure you Router for Static NAT, click on the static NAT button in the Service Configuration screen. NOTE: Static NAT will allow you to configure your Router to work with the special NAT services. 12.6 Enabling Static NAT If you clicked on static NAT[...]

030-300411 Rev. A 89 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide This following screen shows Static NAT enabled. 12.7 Disabling Static NAT If you clic ked on static NAT in the Service Configuration screen, the following screen will be displayed, select a device name fr om the Static NAT De vice pull-down arrow an d click on disable. Thi[...]

030-300411 Rev. A 90 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide The following screen shows Static NAT disabled (No device is d isplayed in the field adjacent to the static Nat button.)[...]

030-300411 Rev. A 91 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 13. MAINTENANCE (MODEL 6100) 13.1 Backup/Store The following settings will be displayed if you select Backup/Restore from the Maintenance menu. Current configu ration becomes Backup Configuration Select this button if you want to stor e all of the curren t configuration da[...]

030-300411 Rev. A 92 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 13.2 Firewall Log The following settings will be displayed if you select Firewall Lo g from the Maintena nce menu. This screen is an advanced diagnostics sc reen. It alerts y ou of notew orthy inform ation sent t o your Rout er from the Internet. The screen can cont ain 10[...]

030-300411 Rev. A 93 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 13.3 Change Password The following settings will be displayed if you select Change Pa ssword from the Ma intenance menu. After you enter your data into the approp riate settings, click on change . Enter Administrative Name NOTE: This changes the Systems Administrator passw[...]

030-300411 Rev. A 94 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 13.4 Remote Access The following screen will appear if you select Remote Access from the Maintenance men u. T o enab le Re mot e Access, type in a password and clic k t he enable remote access button. NOTE: The pa ssword should be at least 4 characters long a nd should not[...]

030-300411 Rev. A 95 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 13.5 Update Device The following screen will be displayed if you click on Update Device from the Maintenance menu. This screen is used to update the firmware t hat controls the operation of the DSL Router. The updated firm ware may be loade d from either a fi le that is lo[...]

030-300411 Rev. A 96 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide Click on the local update now button in the Update Device screen to select the upgrade file from your PC’s hard drive. This screen allows you to upgr ade the software on your Route r. Click Browse… and go to the location where the upgrade file is stored. NOTE: The actu[...]

030-300411 Rev. A 97 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide Select the appropriate upgrade file from your browser. The file name will appear in the field labeled Upgrade File . Click on upload file. This screen shows that t he file is being uploaded to your Router.[...]

030-300411 Rev. A 98 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide The screens below show that the file upload has co mpleted and that the Programming Flash is being erased to prepare the Fl ash storage a rea for uploa d of the new fi le. (Programm ing Flash is a temporary storage area f or uploaded fil es.) The screen below shows that th[...]

030-300411 Rev. A 99 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide After the Rout er has been reset , confirm that you ha ve a DSL sync a nd that your P PP session dis plays UP.[...]

030-300411 Rev. A 100 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 14. TROUBLESHOOTI NG (MODEL 6100) 14.1 System Self Tests The following settings will be displayed if you select System Self Tests from the Troubleshooting m enu. Click on test all to run a diagnostic test on your Rout er’s connect ion. This screen had been displayed in [...]

030-300411 Rev. A 101 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide Connection/Status DSL The Router c hecks the status of the R outer connection. Possible responses are: UP: The Router is operating correctly and has ob tained synchronization with the opposing netw ork device. DOWN: The R outer is ope rating correctly , but has not synchr[...]

030-300411 Rev. A 102 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide the Service Provider’s network. You can PI NG a remot e computer via the IP address or the DNS addr ess. If your PING fails, try a different IP or DNS address. Possible responses are: Success: The Remote Host computer was detected. No Response: There was no r esponse to[...]

030-300411 Rev. A 103 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide To see a list of the log options, click on the arrow at th e LOGS pull-down menu. Select an option from the list provided at th e Diagnos tics Logs screen. If you clicked on All, the fo llowing screen will be disp layed. This screen provides a detailed list o f the Router[...]

030-300411 Rev. A 104 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 14.3 WAN VC Statistics The following settings will be displayed if you select WAN VC Stats from the Troubleshooting me nu. VPI/VCI Displays the VPI/ VCI values obtai ned from your Internet Service Provi der. In Errors The number of error packets received on the ATM port. [...]

030-300411 Rev. A 105 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 14.4 Ethernet Statistics The following settings will be displayed if you select Ethernet Stats from the Troubleshooting menu. In Errors The number of error packet s received on the Ethernet interface. In Discard Packets The number of discarded packets recei ved. In Non Un[...]

030-300411 Rev. A 106 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 14.5 Transceiver Statistics The following settings will be displayed if you select Transceiver Stats from the Troubleshooting menu. Transceiver Revision The transceiver software version number. Vendor ID Code The CPE Vendor’s ID code for th eir chipset. Line Mode The op[...]

030-300411 Rev. A 107 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 14.6 USB Port Statistics The following settings will be displayed if you select USB Port Stats from the Trou bleshooting menu. Number of Resets The number of tim e s the Host PC reset the USB interface. Number of Isrs The number of times the Host PC requested communicatio[...]

030-300411 Rev. A 108 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 14.7 LAN Statistics The following settings will be displayed if you select LAN Stats from the Troublesh ooting menu. Device IP Address Displays the IP ad dress of the devices on the LAN. DHCP NetMask Displays the Subnet Mask, which determines what portion of an IP address[...]

030-300411 Rev. A 109 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 15. NA T SER VICES (MODEL 6100) Application/Game Port /Protoco l Aliens vs. Predator 80 UDP, 2300 UDP, 8000-8999 UDP America Online 5190 TCP/UDP AoE II: Conquors 47624 TCP/UDP, 6073 TCP/UDP, 2300-240 0 TCP/UDP AOL Instant Messenger 4099 TCP, 5190 TCP Asheron's Call 9[...]

030-300411 Rev. A 110 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide Application/Game Port /Protoco l UDP 29901 Ghost Recon TCP 80 UDP 1038 UDP 1032 UDP 53 UDP 2347 UDP 2346 GNUtella 6346 TCP/UDP, 12 14 TCP Half Life Server 2 7005 UDP(client only) 27015 UDP Heretic II Server 2891 0 TCP Hexen II 26900 (+1) each pl ayer needs their own p ort[...]

030-300411 Rev. A 111 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide Application/Game Port /Protoco l Napster 6699 TCP Need for Spee d 3, Hot Purs uit 1030 TCP Need for Speed, Porsche 9442 UDP Net2Phone 6801 UDP NNTP 119 TCP/UDP Operation Flash Point 47624 UDP, 6073 UDP, 2300 -2400 TCP/UDP, 2234 TCP Outlaws 5310 TCP/UDP Pal Talk 2090-2091 [...]

030-300411 Rev. A 112 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide Application/Game Port /Protoco l enabled. Hom e master servers use ot her ports like 27500 Port 8080 is f or UT Server A dmin. In the [UWeb.WebSe rver] section of the se rver.ini file, set the ListenPort to 8080 and ServerName to the IP assigned to t he router from your I[...]

030-300411 Rev. A 113 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 16. PRODUCT SPECIFICA T IONS (Models 6000, 6100, 61 10) AAL and ATM Support (Models 6000, 6100, 61 10) • ATM Trafic QOS: UBR, CBR, VBR nrt, VBRrt • OAM 15 • 8 VC (Virtual Circuit) • VPI: 0-255 • VCI: 0-65 535 • ATM Forum UNI 3.1/ 4.0 Bridging (Model 6100) • [...]

030-300411 Rev. A 114 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 17. APPENDIX A – HELP (MODEL 6100) If you select Help from the menu bar, a message from the help screens will be displayed. The type of message displayed depends on the menu that you are view ing. If you are viewing a pop-up screen , click the help link in t he pop-up s[...]

030-300411 Rev. A 115 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide B Backup/Restore This option al lows the R outer configu ration to be bac ked up to o r restored from a secure location i n flash. The following options are disp layed. Backup/Restore Current becomes Back-up Selectin g this command butto n will backup the cu rrent active [...]

030-300411 Rev. A 116 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide D Diagnostics Help This screen pr ovides tools for diagnosi ng PPP connectio n problem s. Some tests de pend on the Rout er status and t he capabilities exercised by previous tests, which may preven t other types of testing. Beginning of Diagnostics Help screens DSL The R[...]

030-300411 Rev. A 117 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide PPP This field di splays the PPP C onnection st atus. A PPPoE or PPPoA session must alr eady be established. The following is a list of the possible responses: PPP Connection up The Router has established a PPP connection. no connection There is no PPP connection. A PPP s[...]

030-300411 Rev. A 118 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide DNS The DNS test issues a re quest to try to resol ve the name of a particular host. The host name is entered in the inpu t box. The following is a list of th e possible responses: DNS Success The Router has successfully obtained the res olved address. The IP a ddress is [...]

030-300411 Rev. A 119 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide DHCP Configuration This screen contai ns the settings w hich control how the AD SL router interacts with th e local devices connected to the router. Wes tell does not re commend t hat you change these settings . The followi ng settings are displayed. DHCP DHCP Serve r Dyn[...]

030-300411 Rev. A 120 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide E Edit Connection Profiles This screen facilitates the changing of connection prof ile param eters. The following settings are displayed. Edit Connection Profiles Connection Name This field is a description of the default connection profile that the Router will use. Feel [...]

030-300411 Rev. A 121 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide Firewall Settings This screen is an advanced c onfiguration sc reen. It allows you to set t he level of secu rity you wis h to have o n your local network. All security levels ex cept “None” protect against known Internet attacks and devices t hat attempt to gain remo[...]

030-300411 Rev. A 122 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide belongs to your local network. DHCP Start Address This setting specifies the start of the IP address pool that the Router uses to assign IP addresses to l ocal devices. DHCP End Address This setting specifies the end address of the IP address p oo l used for automatic con[...]

030-300411 Rev. A 123 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide DHCP Start Address (If DHCP is enable d for Private LAN) This setting specifies the start of the IP address pool th at the modem uses to assign IP addresses to l ocal devices. DHCP End Add ress (If DHCP is enable d for Private LAN) This setting specifies the end address o[...]

030-300411 Rev. A 124 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide R Remote Access This page allows you to configure your modem so that it ca n be configured remot ely. On ce enabled, this feature can be manually disabled, or it will automatically disable after 20 minutes of configuration inactivity. Remote Access Password This is the pa[...]

030-300411 Rev. A 125 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide T Trace The Trace feature allows you to perform an IP trace route to a remote computer either within or beyond the Internet service provider’ s network. Enter either the IP address or the hostn ame of the remote host computer into the input box to the right of the Trace[...]

030-300411 Rev. A 126 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide User Name This screen is asks for information that will allow the Ro uter to make a connection to the ISP on your behalf. The Router will need to know your Accou nt ID and Account Password. This information is sto red in the Router. User Name Connection Name This is a des[...]

030-300411 Rev. A 127 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 18. APPENDIX B –HARDW ARE FEA TURES (Models 6000, 6100, 61 10) 18.1 LED Indicators This section explains the LED States and Descriptions. LED indicators are used to veri fy the unit’s ope ration and status. LED States and Descriptions (Model 6000) LED State Descriptio[...]

030-300411 Rev. A 128 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 18.2 Cable Connectors and Switch Locations Model 6000 • DSL Connector (RJ-11) • Ethernet Connector (RJ-45) (yellow) • Power Connect or • ON/OFF Switch (optional) Model 6100 and Model 6110 • DSL Connector (RJ-11) • USB Connector (b lue) • Ethernet Connector ([...]

030-300411 Rev. A 129 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 18.3 Connector Descriptions The following table displays the conn ector types. (Models 6000, 6100, 6110) SYMBOL N AME T YPE F UNCTION DSL LINE 6-pin RJ-1 1 modular jack Connects t o an ADSL-equipped t elephone jack or DSL connection of a POTS splitter. USB 4-pin USB Serie[...]

030-300411 Rev. A 130 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 19. APPENDIX C – DIAGNOSTIC SOFTW ARE (Models 6000, 61 10) 19.1 Installing Diagnostic Software for Window s Note: Your Service Provider may require that you inst all the diagnostic software for technical suppo rt. However, the sof tware is not required to operate your m[...]

030-300411 Rev. A 131 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide Choose a directory to in stall the application. Click on Next to accept t he default directory or to browse to another location. If you clicked on Next , the Modem Detect screen will be displayed. Click on Ne xt .[...]

030-300411 Rev. A 132 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide When the di agnostic software has finis hed loading, t he Setup Complete screen will be displayed. Select Run application now , and then cli ck on Done. An icon for the diagnostic features will be placed in your taskbar. The diagnostic software ca n affect key settings of[...]

030-300411 Rev. A 133 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide The About Panel The About P anel display s inform ation on the m odem hardwa re model and software ve rsions. To display th e Menu screen, right click on the About Panel . The following Menu screen will be displayed. Choose one of the options f rom the Menu scree n.[...]

030-300411 Rev. A 134 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide If you selected About from the Menu screen, the following screen will be displayed. It displays informatio n about the modem ’s software versio n and copyri ght date. NOTE: The actual inform ation disp layed in this screen may vary. Menu Screen Options Modem Browser -Th[...]

030-300411 Rev. A 135 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide If you clicked on Next, t he Confirmation screen will be displayed. Click on Yes to confirm that you want to uninstall the diagnostic icon application. When the system is finished uninstallin g the diagnostic icon application, the Uninstall Complete screen will be display[...]

030-300411 Rev. A 136 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 20. APPENDIX D – EXITING THE ROUTER (Model 6100) When you are ready to exit this interface, click on X (close) in the upper right -hand corne r of the hom epage window. NOTE: Closing this window will not affe ct your PPP Status (your PPP session will not be disconnected[...]

030-300411 Rev. A 137 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 21. TECHNICAL SUPPORT INFORMA TION (Models 6000, 6100, 61 10) Westell Technical Support If technical as sistance is re quired, contact Westell by usin g one of the f ollowing optio ns: North America Phone: 1-630-3 75-4500 U.K./Eur ope Phone: (44) 01 256 843311 Visit Weste[...]

030-300411 Rev. A 138 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 23. SOFTW ARE LICENSE AGREEM ENT (Models 6000, 6100, 61 10) READ THE TERMS AND CONDITION S OF TH IS LICENSE AGREEMEN T CAREFULLY. THIS SOFTWARE IS COPYRIG HTED AND LICENSED (NOT SOLD ). BY INSTALLING AND OPERATING THIS PRODUCT, YOU ARE ACCEPTING AND AG REEING TO THE TERMS[...]

030-300411 Rev. A 139 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide EXCEPT FOR THE WARRANTIES SET FO RTH ABOVE, THE SOFTWARE DISKETTES, AND THE SOFTWARE C ONTAINED THEREIN, ARE LICENSED "AS IS," AND LICENSOR DISCLAIMS AN Y AND ALL OT HER WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING, WITHOUT LI MITATION, ANY IMPLIED WARRANTI[...]

030-300411 Rev. A 140 July 2004 Westell (Models 6000, 6100, 6110 ) User Guide 24. PUBLICA TION INFORMA TIO N (Models 6000, 6100, 61 10) Westell ® Modem (Models 6000, 6100 , 6110) User Guide Part Nu mber 030-300411 Rev. A July 2004 © 2004 Westell, Inc. All rights reserved. Westell, Inc. 750 Nort h Commons D rive Aurora, Illinois 60504 USA www.west[...]