Woods Equipment BH80X manual

I NST AL LA TION MAN U AL SA VE THIS MANU AL! Include it with your Backhoe Manual. It contains safety , operation, and repair part information not found in other manuals. 1012552 3-P OINT MOUNTING KIT For W oods BH70X, BH80X Backhoes MAN0472 (9/23 /2005) T ested. Proven. Unbe atable.[...]

2 Introduction SFMK (Rev . 6/6/2005) T O THE DEALER : Assemb ly and prop er installation of this pro duct is the re sponsi bility of the Woods ® dealer . Read manua l instruc tions and safet y rules . Make sure all item s on the Dealer ’s Pre-Del ivery and Delivery Check L ists in the Opera tor ’s Manual are com pleted befo re rele asin g equi[...]

Safety 3 BH 3-Pt Mo unt (Rev . 2/2 5/2005) INST ALLA TION  This Mounting Kit is to be used on l y for the backhoes and tractors specified in the Inst allation section of t his manua l. Any other use o r modifica- tion of this mounting k it may resul t in seriou s injury or death.  Hydraulic s must be con nected as instructed in this manual. D[...]

4 Safety BH 3-Pt M ount (Rev . 2/25/2 005) (Safety R ules continue d from previou s pag e)  Alwa ys wear re lative ly tigh t and belt ed c lothing to avoid getting caught in moving p arts. W ear sturdy , ro ugh-soled work shoes and protective equipment for eyes, hair , hands, hearing, and he ad; and respir ator or filter mask wh ere ap propriate[...]

Inst allation 5 MAN047 2 (9/23/ 2005) BACKHOE 3-POINT MOU NT INST ALLA TION TRACTOR PREP ARA TION NOTE: For installin g this 3-poin t mountin g kit, refer- ence to r ight, left, for ward and rea rward di rection s are determin ed from the opera tor ’s position in the back- hoe seat. NOTE: Leave al l hardwa re lo ose until mounting kit has been fi[...]

6 Installation MAN04 72 (9/23/20 05) Att ach T op Link Bars to Backhoe 1. Attach top li nk bar (3) to the mai n frame usin g cap screw (8) , hardene d flat was her (15), an d hex nut (1 1). 2. Slide doub le top link (1) over top link bar ( 3) and secu re using cap scr ew (10) , hardened flat washer (15) , and hex hut (1 1) through end hole on doubl[...]

Inst allation 7 MAN047 2 (9/23/ 2005) Att ach 3-Point Mo unt to Backhoe 3. Att a ch lock bar (7) to righ t (4) an d lef t (5) rear bracke ts using cap screws (9), fou r (two pe r side) hardened flat was hers (15 ), and h ex nuts (1 1). D o not tighten nuts at thi s time. 4. Swing loc k bar up and attach it to th e double to p link bar using cap sc [...]

8 Installation MAN04 72 (9/23/20 05) Att ach Backhoe to T ractor (Cont inued) 5. Connect trac tor 3- point lowe r lift arms t o the mounting pi ns on the back hoe. Secur e using kl ik pin (14) and was hers (17). Us e washers to take up slac k between k lik pin and 3 -poin t arm. Se e Figure 7. 6. Connect dou ble top lin k bar to the t ractor top li[...]

Inst allation 9 MAN047 2 (9/23/ 2005) Remo ve Backhoe  The only time the bac khoe may be operated from a position other than the operator seat is during backhoe a tt achme nt and removal. Opera- tor must • Read Mounting Kit Manual instructions on att aching and removing backhoe and use extreme c are. • Always st and between rear tire and bac[...]

10 Installation MAN04 72 (9/23/20 05) Atta ch Backhoe to T rac tor  This mounting kit is designed to provide secure moun ting and adequ ate operator c lear- ance when properly inst alled. Check clearance dimensions shown in Figure 1 to be sure you have inst alled mounting kit correctly . Follow all mounting i nstruc tions in thi s manual. Do not[...]

Inst allation 11 MAN047 2 (9/23/ 2005) T ract or Connections There may be mo re than on e hole provide d in tractor top link attachment br acket. Se lect hole A, B, or C that most ev enly distr ibutes the load between to p link bracke t top and b ottom m ountin g bolts. See Figur e 10. For the Ma ssey Fergus on 1455V tractor use hole position D. NO[...]

12 Part s MAN04 72 (9/23/2005 ) 1012552 3-POINT MOUNTING KIT 17 1 8 10 8 3 7 11 15 4 9 15 5 14 16 15 15 11 15 11 12 11 15 6 13 CD6779 R E F P ART QTY DESCRIPTION 1 1007345 1 Doubl e top l ink 3 1012532 1 T op link bar 4 1012534 1 Right rear bracke t 5 1012535 1 Left rear brac ket 6 1012567 4 M 22 Nord lock washer 7 10125 82 1 Lock bar 8 12558 * 2 3[...]

Appendix 13 Bolt T orque & Size Chart s (Rev . 8/14/02) BOLT T OR QUE CHA R T Always tighten har dware to these values unles s a different tor que value or tighte ning p rocedure i s list ed for a specifi c applica tion . F ast eners must al wa ys be repla ced with t he sam e grade as sp ecified in the m anual par ts list. Always use the proper[...]

14 Appendix Bolt T orque & Size Chart s (Rev . 8/14/2002) BOLT SIZE CH AR T NO TE: Char t shows bolt thread s izes and co rrespo nding head (wrenc h) sizes for standa rd SAE and metr ic bol ts. 5/16 3/ 8 1/2 5/ 8 3/4 7/ 8 SAE Bolt Thread Sizes MM 25 50 75 100 125 150 175 IN 1 7 Metric Bolt Thread Sizes 8 MM 1 8 MM 14MM 12MM 10MM 16MM 2 34 5 6 A[...]

F-3079 (Rev . 9/21/2005) Wo od s E q u i p m e n t Company 260 6 South Illinois Ro ute 2 Post Offi ce Box 1000 Oregon, Illinois 61061 815- 7 32-2141 tel 815- 7 32- 7580 fax www .W o odsEquipment.com W ARR ANTY (All Models Except Mow’ n Machine TM Zero-T urn Mo wers and W oods Bou ndary TM Utility V eh icles) Please Enter I nformation Be lo w and [...]

F-8494 (Rev . 6/23/2005) W oods Equipm ent Company 260 6 South Illinois Route 2 Post Office Box 1000 Oregon, Illinoi s 610 61 815- 73 2-2141 tel 815- 73 2- 75 80 fax www .W oodsEquipme nt.com ©2005 Woods Equipment Company . All rights reserved. WOO DS, the Woods logo, and "T ested. Proven. Unbeatable." are tradem arks of Woods Equipment [...]