Yamaha 2 manual

EN PM1D System Software V ersion 2 Supplementar y Manual This supplementary manual primarily describes the additional and modified func- tions that have been incorporated into PM1D System Software version 2.0. Please read this manual in conjunction with the original manual that came with your Y amaha PM1D digital audio mixing system. ■ Main chan[...]

2 Main changes Main changes If you adjust the HA gain on the master CS1D (master for HA co ntrol), the att enuation on a slave CS1D can auto matically be adjusted so that the channel output levels will remain unchanged. The master unit is the CS1D (or PM1D Manager) c onnected v ia a DSP1D that is connected t o the por t through which the AI8 is con[...]

Main changes 3 Va r ious effects sold as Add-On Effects packages for Y amaha digital mixing consoles (such as DM2000) are no w included as standard. T o use the V CM effects, you m ust first specify the n umber of V CM effects you wish to use to limit the number of av ailable GEQ modules. The V CM effects employ V irtual Circuitr y Modeling t e ch[...]

4 Main changes ■ Moving the channels in the CH COPY screen 1. Display the CH COPY screen for the IN CH View or OUT CH View function. 2. In the CH COPY/CH MOVE section, turn on the CH MOVE button. If the CH COPY button is on, you can use the usual Chan- nel Copy function. 3. Press the [SEL] switches to select the channels you wish to move. 4. Sele[...]

Changes in Scene Memories and Libraries 5 Changes in Scene Memories and Libraries In the TC E VENT screen, y ou can now register scenes in the order of use, so that these scenes can be r ecalled manually , or automatically acc ording to the specified interval time. The T C EVENT screen featur es the following additional func- tions: 1 EVENT RECALL[...]

6 Changes in Scene Memories and Libraries 3 SCENE MEMORY These are the number and title of the scene to be recalled. Click the button to displa y the TC EVENT pop-up w indow , then click the number of a scene to select it. 4 EVENT RECALL These functions enable you to r ecall events. The follo w ing three buttons ar e provided. 5 MOVE UP/MOVE DOWN T[...]

Changes in Scene Memories and Libraries 7 Y ou can globally apply the Recall Safe function to settings for units that are patc hed to R ecall Safe channels, as well as to the Re call Safe channel settings themselves. Note • Selecting the Recall Safe items using the SAFE [RECALL] switch on the panel or the button in the IN CH VIEW screen (when the[...]

8 Changes and additions of screens Changes and additions of screens The F ADER VIE W screen has been added to the IN CH View function and OUT CH View function. 1 ON/MUTE These buttons enable y ou to switch the channels on/off, and switch DCA group muting on/off. The y are link ed to the [ON] switches of the corresponding channels and the [MUTE] swi[...]

Changes and additions of screens 9 The INPUT GR screen and OUTPUT GR screen ha ve been added to the M eter function. These scr eens display the gain re duction meters for Input channel gates and c ompressors, and Output channel compr essors. 1 DISPLA Y CH Sw itches the channels that ar e display ed in the INPUT GR and OUTPUT GR screens. INPUT GR sc[...]

10 Other changes Other changes Y ou can specifically select any region of any scene or library data to be sav ed to a memor y card. Y ou can also specifically select any r eg ion of any sc ene or libr ar y data to be loaded fr om a memory card. In addition to BASIC mode (in which you can sav e the entire or specified data in the scene memories o[...]

Other changes 11 The signal can be now directly output just before the I nput c hannel HPF . Y ou can also adjust the direct output level. To select a position just before the HPF as the direct output on the INSER T/DIRECT POINT screen, turn on the PRE HPF button for the corr esponding channels in the DIRECT OUT POINT column. The DIRECT OUT LEVEL c[...]

12 Other changes In addition to entering hexadecimal values, you can also spec- ify MIDI events for scene r e call by entering the desired MIDI ev ents using the list in the new MIDI E VENT SETUP pop-up w indow . T o open this pop-up w indow , a MIDI EVENT button has been added to the SCENE ST ORE pop-up w indow and the SCENE TITLE pop-up window . [...]

Other changes 13 • Y ou can f ollow the steps belo w to set the DELA Y TIME using the SCENE ST ORE (or SCENE TITLE EDIT) pop-up windo w . 1. Mov e the cursor to the COMMENT/MIDI EVENT section, then click the EVENT CODE SET b utton. 2. Click T and numbers 0-9 on the character palette to specify the two-digit dela y time in 100 msec steps. For e xa[...]

14 Other changes In the previous software version, the Global Paste function enabled you to select up t o 100 scenes at a time. H owever , this limitation has been remov ed. H owever , if you select 101 or more scenes t o paste, y ou will not be able to use the U ndo function. In this case, back up all impor tant data using the Select All function,[...]

Appendix 15 Appendix This front of house preset scene is designed by a famous A merican front of house engineer. It features preset parameter values for the out- put channels, including Front Fill, Dela yed Speaker , as w ell as Stereo M ix Send to the internal effects. This monitor mix preset sc ene is designed by a famous American mon- itor engin[...]

16 Appendix This preset simulates an in-ear monit or ing mix. I t is a hig hly practical preset, t ypical of the PM1D , with in-ear monitor and W edge monitor categorized into Output DCA for emergency use. This preset simulates a m usical mix scene. MIX1-12 are set to Fix, and are designed to be used as buses. This preset simulates a sc ene for an [...]

Appendix 17 This preset simulates a theatrical mix scene. It features the default set- tings for L-C-R panning. This preset simulates a br oadcasting application. It includes input c hannel EQ and Comp settings that are typical to broadcasting, as well as multiple sends. This preset simulates a li ve recording application. MIX1-48 are set to Fix, a[...]

18 Appendix 072: REV -X HALL, 073: REV -X ROOM, 074: REV -X PLA TE These effects are a ne wly-developed 2-in/2-out rev erb algorithm. They provide a high-density , richly rev erb erant sound quality , with smooth attenuation, spread and depth that w ork together to enhanc e the original sound. Y ou can choose one of three pr og rams to suit the ac [...]

Appendix 19 078: COMP260S This effect emulates the characteristics of mid 70’ s compressors/limit- ers that are the standard for li ve SR. Y ou can link and control the L and R channel parameters. 079: EQUALIZER601 This effect emulates the characteristics of 70’ s analog equalizers. R e- creating the distortion of t ypical analog circuits will [...]

U .R.G., Pro Audio & Digital Musical Instrument Division, Y amaha Cor poration © 2005 Y amaha Corporation WF52680 406IP APx.x-01A0 Printed in Japan[...]

MIX1 MIX2 MIX48 STEREO L STEREO R CUE L CUE R PM1D V2.0 System Block Diagram (CS1DV2, DSP1D, AI8, AO8, DIO8) DITHER ... ... CH 1(-48) ... ... Option Card IN (8ch) 8 CASCADE IN 58 PAN MIX to STEREO MIX 1(-48) from MIX1 from MIX48 from STEREO A Lch from STEREO A Rch SUB IN L MONITOR OUT B L R from MIX1 from MIX48 from STEREO B Lch from STEREO B Rch f[...]

PATCH 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 Digital Bit 34 35 36 0 –10 –20 –30 –40 –50 –60 –70 –80 –90 –100 –110 –120 –130 –140 –150 –160 –170 –190 –200 –210 ATT. EQ LEVEL PAN/SEND LEVEL EQ DA DSP Noise Floor GAIN HA DIGITAL GAIN STEREO OUT A-B dBFS Digita[...]